Tunable multimodal adhesion of 3D, nanocrystalline CoFe2O4 pollen replicas.

3D replicas of sunflower pollen microparticles, comprised of a multicomponent magnetic spinel ferrite (CoFe2O4) with tailorable adhesive properties, have been synthesized for the first time via a conformal layer-by-layer (LbL) surface sol-gel (SSG) deposition process followed by organic pyrolysis and oxide compound formation at a peak temperature of 600 °C-900 °C. These high-fidelity ferrite pollen replicas exhibited multimodal (van der Waals, vdW, and magnetic) adhesion that could be tuned via control of the CoFe2O4 nanoparticle and crystal sizes. The CoFe2O4 pollen replicas exhibited a non-monotonic change in short-range (~10 nm) vdW adhesion with an increase in the peak firing temperature, which was consistent with the counteracting effects of particle coarsening on the size and number of nanoparticles present on the sharp tips of the echini (spines) on the pollen replica surfaces. The longer-range (up to ~1 mm) magnetic force of adhesion increased monotonically with an increase in firing temperature, which was consistent with the observed increases in the values of the saturation and remanent magnetization of CoFe2O4 with an increase in average nanocrystal size. By adjusting the nanocrystal/nanoparticle sizes of the CoFe2O4 pollen replicas, the total force of adhesion (vdW + magnetic) to a magnetic substrate could be increased by a factor of ~3 relative to native pollen grains.

Chemisorption of cyanogen chloride by spinel ferrite magnetic nanoparticles.

Spinel ferrite magnetic nanoparticles, MnFe2O4, NiFe2O4, and CoFe2O4, were synthesized and used as gas-phase adsorbents for the removal of cyanogen chloride from dry air. Fixed-bed adsorption breakthrough experiments show adsorption wave behavior at the leading edge of the breakthrough curve that is not typical of physically adsorbed species. Fourier transform infrared spectroscopy (FTIR) results indicate that CK is reacting with the spinel ferrite surface and forming a carbamate species. The reaction is shown to be a function of the hydroxyl groups and adsorbed water on the surface of the particles as well as the metallic composition of the particles. The surface reaction decreases the remnant and saturation magnetism of the MnFe2O4 and CoFe2O4 particles by approximately 25%.

Controlled synthesis and magnetic properties of bimagnetic spinel ferrite CoFe2O4 and MnFe2O4 nanocrystals with core-shell architecture.

A combination of hard phase CoFe(2)O(4) and soft phase MnFe(2)O(4) as the bimagnetic nanocrystals in a core-shell architecture has been synthesized, and their magnetic properties have been systematically studied. Both HRTEM and EDS results confirmed the formation of bimagnetic core-shell structured nanocrystals. On the basis of the systematic and comparative studies of the magnetic properties of a mechanical mixture of pure CoFe(2)O(4) and MnFe(2)O(4) nanocrystals, chemically mixed Co(1-x)Mn(x)Fe(2)O(4) nanocrystals, and bimagnetic core-shell CoFe(2)O(4)@MnFe(2)O(4) and MnFe(2)O(4)@CoFe(2)O(4) nanocrystals, the bimagnetic core-shell nanocrystals show very unique magnetic properties, such as the blocking temperature and coercivity. Our results show that the coercivity correlates with the volume fraction of the soft phase as the theoretical hard-soft phase model has suggested. Furthermore, switching the hard phase CoFe(2)O(4) from the core to the shell shows great changes in the coercivity of the nanocrystals. The bimagnetic core-shell nanocrystals evidently demonstrate the rational design capability to separately control the blocking temperature and the coercivity in magnetic nanocrystals by varying the materials, their combination, and the volume ratio between the core and the shell and by switching hard or soft phase materials between the core and shell. Such controls via a bimagnetic core-shell architecture are highly desirable for magnetic nanocrystals in various applications.

Phosphodiesterase 4B mediates extracellular signal-regulated kinase-dependent up-regulation of mucin MUC5AC protein by Streptococcus pneumoniae by inhibiting cAMP-protein kinase A-dependent MKP-1 phosphatase pathway.

Otitis media (OM) is the most common childhood bacterial infection and the major cause of conductive hearing loss in children. Mucus overproduction is a hallmark of OM. Streptococcus pneumoniae is the most common gram-positive bacterial pathogen causing OM. Among many mucin genes, MUC5AC has been found to be greatly up-regulated in the middle ear mucosa of human patients with OM. We previously reported that S. pneumoniae up-regulates MUC5AC expression in a MAPK ERK-dependent manner. We also found that MAPK phosphatase-1 (MKP-1) negatively regulates S. pneumoniae-induced ERK-dependent MUC5AC up-regulation. Therapeutic strategies for up-regulating the expression of negative regulators such as MKP-1 may have significant therapeutic potential for treating mucus overproduction in OM. However, the underlying molecular mechanism by which MKP-1 expression is negatively regulated during S. pneumoniae infection is unknown. In this study we show that phosphodiesterase 4B (PDE4B) mediates S. pneumoniae-induced MUC5AC up-regulation by inhibiting the expression of a negative regulator MKP-1, which in turn leads to enhanced MAPK ERK activation and subsequent up-regulation of MUC5AC. PDE4B inhibits MKP-1 expression in a cAMP-PKA-dependent manner. PDE4-specific inhibitor rolipram inhibits S. pneumoniae-induced MUC5AC up-regulation both in vitro and in vivo. Moreover, we show that PDE4B plays a critical role in MUC5AC induction. Finally, topical and post-infection administration of rolipram into the middle ear potently inhibited S. pneumoniae-induced MUC5AC up-regulation. Collectively, these data demonstrate that PDE4B mediates ERK-dependent up-regulation of mucin MUC5AC by S. pneumoniae by inhibiting cAMP-PKA-dependent MKP-1 pathway. This study may lead to novel therapeutic strategy for inhibiting mucus overproduction.

Adsorption of sulfur dioxide by CoFe2O4 spinel ferrite nanoparticles and corresponding changes in magnetism.

Adsorption of sulfur dioxide on 10 nm CoFe(2)O(4) spinel ferrite nanoparticles was examined. Adsorption loadings of sulfur dioxide at breakthrough conditions were determined to be approximately 0.62 mol/kg, which is significant given the 150 m(2)/g surface area of the nanoparticles. Adsorption proceeds through a chemisorption mechanism with sulfur dioxide forming a sulfate upon adsorption on the particle surface, which leads to a 23% decrease in the remnant magnetization, a 20% decrease in the saturation magnetization, and a 9% decrease in the coercivity of the magnetic nanoparticles. Adsorbent materials that provide a magnetic signal when adsorption occurs could have broad implications on adsorption-based separations.

Selective removal of ovarian cancer cells from human ascites fluid using magnetic nanoparticles.

A majority of ovarian cancer metastases result from the shedding of malignant cells from the primary tumor into the abdominal cavity. Free-floating cancer cells in serous effusions of late-stage ovarian cancer patients may spread to internal organs, making effective treatment extremely difficult. Selective removal of ovarian cancer cells from serous fluids may abate metastasis and improve long-term prognoses. We have already shown that superparamagnetic nanoparticles conjugated to an ephrin-A1 mimetic peptide with a high affinity for the EphA2 receptor can be used to capture and remove cultured human ovarian cancer cells from the peritoneal of experimental mice. Here we demonstrate the potential clinical utility of the methodology by in vitro capture and isolation of cancer cells from the ascites fluid of ovarian cancer patients. FROM THE CLINICAL EDITOR: Ovarian cancer metastases usually are the result of shedding of malignant cells from the primary tumor into the abdominal cavity. In this paper, a novel nanotechnology-based method is demonstrated for the in vitro capture and isolation of cancer cells from the ascites fluid of ovarian cancer patients.

Nano-conjugate fluorescence probe for the discrimination of phosphate and pyrophosphate.

We describe a pyrophosphate (PPi) probe that is based on a fluorescent dicarboxylate-substituted poly(para-phenyleneethynylene) (PPE) and 10 nm cobalt-iron spinel nanoparticles (NPs) in aqueous media. The spinel NPs efficiently quench the fluorescence of the PPE at a concentration of 20-30 pmol. Addition of phosphate anions to the PPE-NP construct displaces the quenched PPE to give rise to a fluorescent response; we found that PPi and phosphate (Pi) have significantly different binding affinities for the self-assembled materials. We can discern >40 nM PPi in the presence of 0.1 mM Pi at pH 7, which suggests that these assemblies may be useful in bio-analytical applications. This displacement assay was used to effectively determine the ability of pyrophosphatase to hydrolyze PPi to Pi.

Magnetic nanoparticle-peptide conjugates for in vitro and in vivo targeting and extraction of cancer cells.

Magnetic cobalt spinel ferrite nanoparticles coated with biocompatible polygalacturonic acid were functionalized with ligands specific for targeting expressed EphA2 receptors on ovarian cancer cells. By using such magnetic nanoparticle-peptide conjugates, targeting and extraction of malignant cells were achieved with a magnetic field. Targeting ovarian cancer cells with receptor specific peptide-modified magnetic nanoparticles resulted in cell capture from a flow stream in vitro and from the peritoneal cavity of mice in vivo. Successful removal of metastatic cancer cells from the abdominal cavity and circulation using magnetic nanoparticle conjugates indicate the feasibility of a dialysis-like treatment and may improve long-term survival rates of ovarian cancer patients. This approach can be applied for fighting other cancers, such as leukemia, once the receptors on malignant cells are identified and the efficacy of targeting ligands is established.

Formation of orientation-ordered superlattices of magnetite magnetic nanocrystals from shape-segregated self-assemblies.

Magnetic magnetite (Fe3O4) nanocrystals have been synthesized by combining nonhydrolytic reaction with seed-mediated growth. The shape of these magnetite nanocrystals can be controlled either as pure spheres or a mixture of mainly faceted nanocrystals. Faceted magnetite nanocrystals consist of truncated tetrahedral platelets (TTPs), truncated octahedrons (TOs), and octahedrons (OTs). Transmission electron microscopy analysis indicates that the faceted nanocrystal mixture tends to self-segregate based upon the shape in a self-assembly process, and each shape forms its own distinct crystallographic orientation-ordered superlattice assemblies. Self-assemblies of the Fe3O4 nanocrystals in the shapes of TTP, TO, and OT show hexagonal, primitive cubic, and distorted body-centered cubic (bcc) superlattice structures, respectively. The possible mechanism for the formation of different superstructures is attributed to van der Waals interactions. Nanocrystals with different shapes provide diverse building blocks for bottom-up approaches in building nano- and mesosystems. Furthermore, the self-segregation phenomenon of different shaped nanocrystals in self-assembly processes could be very important in envisioning efficient assembly strategies for nanoscience- and nanotechnology-based devices.

Correlation between spin-orbital coupling and the superparamagnetic properties in magnetite and cobalt ferrite spinel nanocrystals.

The superparamagnetic properties of CoFe2O4 and Fe3O4 nanocrystals have been systematically investigated. The observed blocking temperature of CoFe2O4 nanocrystals is at least 100 deg higher than that of the same sized Fe3O4 nanocrystals. The coercivity of CoFe2O4 nanocrystals at 5 K is over 50 times higher than the same sized Fe3O4 nanocrystals. The drastic difference in superparamagnetic properties between the similar sized spherical CoFe2O4 and Fe3O4 (or FeFe2O4) spinel ferrite nanocrystals was correlated to the coupling strength between electron spin and orbital angular momentum (L-S) in magnetic cations. Compared to the Fe2+ ion, the effect of much stronger spin-orbital coupling at Co2+ lattice sites leads to a higher magnetic anisotropy and results in the dramatic discrepancy of superparamagnetic properties between CoFe2O4 and Fe3O4 nanocrystals. These results provide some insight to the fundamental understanding of the quantum origin of superparamagnetic properties. Furthermore, they suggest that it is possible to control the superparamagnetic properties through magnetic coupling at the atomic level in spinel ferrite nanocrystals for various applications.

Shape control and associated magnetic properties of spinel cobalt ferrite nanocrystals.

By combining nonhydrolytic reaction with seed-mediated growth, high-quality and monodisperse spinel cobalt ferrite, CoFe(2)O(4), nanocrystals can be synthesized with a highly controllable shape of nearly spherical or almost perfectly cubic. The shape of the nanocrystals can also be reversibly interchanged between spherical and cubic morphology through controlling nanocrystal growth rate. Furthermore, the magnetic studies show that the blocking temperature, saturation, and remanent magnetization of nanocrystals are solely determined by the size regardless the spherical or cubic shape. However, the shape of the nanocrystals is a dominating factor for the coercivity of nanocrystals due to the effect of surface anisotropy. Such magnetic nanocrystals with distinct shapes possess tremendous potentials in fundamental understanding of magnetism and in technological applications of magnetic nanocrystals for high-density information storage.

Effects of surface coordination chemistry on the magnetic properties of MnFe(2)O(4) spinel ferrite nanoparticles.

To understand the influence of surface interactions upon the magnetic properties of magnetic nanoparticles, the surface of manganese ferrite, MnFe(2)O(4), nanoparticles have been systematically modified with a series of para-substituted benzoic acid ligands (HOOC-C(6)H(4)-R; R = H, CH(3), Cl, NO(2), OH) and substituted benzene ligands (Y-C(6)H(5), Y = COOH, SH, NH(2), OH, SO(3)H). The coercivity of magnetic nanoparticles decreases up to almost 50% upon the coordination of the ligands on the nanoparticle surface, whereas the saturation magnetization has increased. The percentage coercivity decrease of the modified nanoparticles with respect to the native nanoparticles strongly correlates with the crystal field splitting energy (CFSE) Delta evoked by the coordination ligands. The ligand inducing largest CFSE results in the strongest effect on the coercivity of magnetic nanoparticles. The change in magnetic properties of nanoparticles also correlates with the specific coordinating functional group bound onto the nanoparticle surface. The correlations suggest the decrease in spin-orbital couplings and surface anisotropy of magnetic nanoparticles due to the surface coordination. Such surface effects clearly show the dependence on the size of nanoparticles.

Atom transfer radical polymerization synthesis and magnetic characterization of MnFe2O4/polystyrene core/shell nanoparticles.

An atom transfer radical polymerization route is developed for the coating of MnFe2O4 nanoparticles with polystyrene yielding the core-shell nanoparticles with size <15 nm. Magnetic studies show a decrease in coercivity after the formation of polystyrene shell, which is considered due to the reduction of magnetic surface anisotropy upon polymer coating. The MnFe2O4 nanoparticles as the magnetic core were separately prepared by a reverse micelle microemulsion method. Polymerization initiators are chemically attached onto the surface of nanoparticles. The modified nanoparticles are then used as macro-initiators in the subsequent polymerization reaction. This approach provides great flexibility in the selection of magnetic core. Consequently, magnetic tunability is able to be introduced into these core/shell nanoparticulate systems to achieve the desired superparamagnetic response.