A Brief Review of Recent Theoretical Advances in Fe-Based Catalysts for CO2 Hydrogenation.

Catalytic hydrogenation presents a promising approach for converting CO2 into valuable chemicals and fuels, crucial for climate change mitigation. Iron-based catalysts have emerged as key contributors, particularly in driving the reverse water-gas shift and Fischer-Tropsch synthesis reactions. Recent research has focused on enhancing the efficiency and selectivity of these catalysts by incorporating alkali metal promoters or transition metal dopants, enabling precise adjustments to their composition and properties. This review synthesizes recent theoretical advancements in CO2 hydrogenation with iron-based catalysts, employing density functional theory and microkinetic modeling. By elucidating the underlying mechanisms involving metallic iron, iron oxides, and iron carbides, we address current challenges and provide insights for future sustainable CO2 hydrogenation developments.

Mesoscopic simulation of multi-scheme particle separation in deterministic lateral displacement devices using two-piece hybrid pillars.

Pillar shape exploration in deterministic lateral displacement (DLD) technique holds great promise for developing high-performance microfluidic devices with versatile sorting schemes. A recent innovative design using filter-like micropillars was proposed to improve cell separation, but its significance might be greatly underestimated due to an inaccurate understanding of the underlying mechanism. In this study, we employ mesoscopic hydrodynamic simulations to explore the movement and separation of rigid spherical particles in DLD arrays using various two-piece hybrid (TPH) pillars, where each pillar consists of two individual pieces separated by a tunable inter-piece channel. In comparison with the conventional one-piece pillars, the back piece of TPH-pillars is found to hierarchically tailor the flow profile of the front piece on the basis of the row shift fraction and the inter-piece channel width, resulting in unique tunable multi-scheme separation at low, intermediate, and high row shift fractions, respectively. At the intermediate regime, in particular, the first flow lane that determines the critical separation size could be physically fenced out by the inter-piece channel, and a delicate coupling of hydrodynamic filtration and DLD has been revealed to induce a constant critical size in the whole regime. This work theoretically demonstrates the feasibility and significance of TPH-pillars, which may open up a new direction of the geometry design by exploiting rich multi-piece hybrid structures to expand the versatility of the DLD technique.

Biomolecular 1D Necklace-like Nanostructures Tailoring 2D Janus Interfaces for Controllable 3D Enteric Biomaterials.

Construction of well-ordered two-dimensional (2D) and three-dimensional (3D) assemblies using one-dimensional (1D) units is a hallmark of many biointerfaces such as skin. Mimicking the art of difunctional properties of biointerfaces, which skin exhibits as defense and shelter materials, has inspired the development of smart and responsive biomimetic interfaces. However, programming the long-range ordering of 1D base materials toward vigorous control over 2D and 3D hierarchical structures and material properties remains a daunting challenge. In this study, we put forward construction of 3D enteric biomaterials with a two-strata 2D Janus interface assembled from self-adaptation of 1D protein-polysaccharide nanostructures at an oil-water interface. The biomaterials feature a protein dermis accommodating oil droplets as a reservoir for bioactive compounds and a polysaccharide epidermis protecting them from gastric degradation. Furthermore, the epidermis can be fine-tuned with different thicknesses rendering enteric delivery of a bioactive cargo (coumarin-6) with controllable retention in the intestinal tract from 6 to 24 h. The results highlight a skin-inspired construction of enteric biomaterials by self-adaptation of 1D nanostructures at the oil-water interface toward 2D Janus biointerfaces and 3D microdevices, which can be tailored for intestinal treatments with intentional therapeutic efficacies.

Dissipative Particle Dynamics Simulation of the Sensitive Anchoring Behavior of Smectic Liquid Crystals at Aqueous Phase.

Rational design of thermotropic liquid crystal (LC)-based sensors utilizing different mesophases holds great promise to open up novel detection modalities for various chemical and biological applications. In this context, we present a dissipative particle dynamics study to explore the unique anchoring behavior of nematic and smectic LCs at amphiphile-laden aqueous-LC interface. By increasing the surface coverage of amphiphiles, two distinct anchoring sequences, a continuous planar-tilted-homeotropic transition and a discontinuous planar-to-homeotropic transition, can be observed for the nematic and smectic LCs, respectively. More importantly, the latter occurs at a much lower surface coverage of amphiphiles, demonstrating an outstanding sensitivity for the smectic-based sensors. The dynamics of reorientation further reveals that the formation of homeotropic smectic anchoring is mainly governed by the synchronous growth of smectic layers through the LCs, which is significantly different from the mechanism of interface-to-bulk ordering propagation in nematic anchoring. Furthermore, the smectic LCs have also been proven to possess a potential selectivity in response to a subtle change in the chain rigidity of amphiphiles. These simulation findings are promising and would be valuable for the development of novel smectic-based sensors.

Deformation and dynamics of erythrocytes govern their traversal through microfluidic devices with a deterministic lateral displacement architecture.

Deterministic lateral displacement (DLD) microfluidic devices promise versatile and precise processing of biological samples. However, this prospect has been realized so far only for rigid spherical particles and remains limited for biological cells due to the complexity of cell dynamics and deformation in microfluidic flow. We employ mesoscopic hydrodynamics simulations of red blood cells (RBCs) in DLD devices with circular posts to better understand the interplay between cell behavior in complex microfluidic flow and sorting capabilities of such devices. We construct a mode diagram of RBC behavior (e.g., displacement, zig-zagging, and intermediate modes) and identify several regimes of RBC dynamics (e.g., tumbling, tank-treading, and trilobe motion). Furthermore, we link the complex interaction dynamics of RBCs with the post to their effective cell size and discuss relevant physical mechanisms governing the dynamic cell states. In conclusion, sorting of RBCs in DLD devices based on their shear elasticity is, in general, possible but requires fine-tuning of flow conditions to targeted mechanical properties of the RBCs.

Mesoscopic simulations of temperature-dependent anchoring and wetting behavior at aqueous-liquid crystal interfaces in the presence of a rod-coil amphiphilic monolayer.

Dissipative particle dynamics simulations have been applied to study the temperature dependent anchoring and wetting behavior of thermotropic liquid crystals (LCs) in the presence of a rod-coil amphiphilic monolayer at the aqueous-LC interface. Upon cooling in the nematic phase, a thermally-induced anchoring transition from homeotropic through tilted to planar has been observed. The growth and propagation of smectic order from the interfaces to the bulk nematic LCs are demonstrated to be mainly responsible for this novel transition sequence. In particular, when a complete smectic layer in the amphiphile monolayer is induced around the bulk transition of nematic-smectic-A, the propagation of homeotropic alignment fails instantly and a unique planar anchoring configuration is formed instead. While heating towards the isotropic phase, simulation results show that the nematic-isotropic transition of confined LCs is slightly shifted to a higher temperature, and a nematic wetting layer with homeotropic alignment appears in the rod block monolayer when the bulk LCs is isotropic. Our systematic simulations throughout the whole phase regimes of LCs provide important molecular-level insight into how the coupling between the ordering of LCs and adsorbents and their temperature dependencies affect the anchoring behavior in this complex system, which should be instrumental in the rational design and application of advanced LC-based biosensors with optimal operating temperature range.

Sorting cells by their dynamical properties.

Recent advances in cell sorting aim at the development of novel methods that are sensitive to various mechanical properties of cells. Microfluidic technologies have a great potential for cell sorting; however, the design of many micro-devices is based on theories developed for rigid spherical particles with size as a separation parameter. Clearly, most bioparticles are non-spherical and deformable and therefore exhibit a much more intricate behavior in fluid flow than rigid spheres. Here, we demonstrate the use of cells' mechanical and dynamical properties as biomarkers for separation by employing a combination of mesoscale hydrodynamic simulations and microfluidic experiments. The dynamic behavior of red blood cells (RBCs) within deterministic lateral displacement (DLD) devices is investigated for different device geometries and viscosity contrasts between the intra-cellular fluid and suspending medium. We find that the viscosity contrast and associated cell dynamics clearly determine the RBC trajectory through a DLD device. Simulation results compare well to experiments and provide new insights into the physical mechanisms which govern the sorting of non-spherical and deformable cells in DLD devices. Finally, we discuss the implications of cell dynamics for sorting schemes based on properties other than cell size, such as mechanics and morphology.

Behavior of rigid and deformable particles in deterministic lateral displacement devices with different post shapes.

Deterministic lateral displacement (DLD) devices have great potential for the separation and sorting of various suspended particles based on their size, shape, deformability, and other intrinsic properties. Currently, the basic idea for the separation mechanism is that the structure and geometry of DLDs uniquely determine the flow field, which in turn defines a critical particle size and the particle lateral displacement within a device. We employ numerical simulations using coarse-grained mesoscopic methods and two-dimensional models to elucidate the dynamics of both rigid spherical particles and deformable red blood cells (RBCs) in different DLD geometries. Several shapes of pillars, including circular, diamond, square, and triangular structures, and a few particle sizes are considered. The simulation results show that a critical particle size can be well defined for rigid spherical particles and depends on the details of the DLD structure and the corresponding flow field within the device. However, non-isotropic and deformable particles such as RBCs exhibit much more complex dynamics within a DLD device, which cannot properly be described by a single parameter such as the critical size. The dynamics and deformation of soft particles within a DLD device become also important, indicating that not only size sorting, but additional sorting targets (e.g., shape, deformability, internal viscosity) are possible.

The phase behavior, structure, and dynamics of rodlike mesogens with various flexibility using dissipative particle dynamics simulation.

We present a systematic dissipative particle dynamics (DPD) study on the phase behavior, structure, and dynamics of rodlike mesogens. In addition to a rigid fused-bead-chain model with RATTLE constraint method, we also construct a semirigid model in which the flexibility is controlled by the bending constant of k(φ). Using this notation, the rigid model has an infinite bending constant of k(φ)=∞. Within the parameter space studied, both two kinds of models exhibit the nematic and smectic-A phases in addition to the isotropic and solid phases. All of the phase transitions are accompanied by the discontinuities in the thermodynamical, structural, and dynamical quantities and the hysteresis around the transition points, and are therefore first order. Note that the obtained solid state exhibits an in-layer tetragonal packing due to the high density. For the rigid model, the simulations show that the liquid crystal phases can be observed for mesogens with at least five beads and the nematic phase is the first one to appear. More importantly, the phase diagram of seven-bead-chain models is obtained as a function of k(φ) and temperature. It is found that decreasing the value of k(φ) reduces the anisotropy of molecular shape and the orientational ordering, and thereby shifts the liquid crystal phases to the lower temperature end of the phase diagram. Due to the different k(φ) dependence of phase transition temperatures, the nematic phase range exhibits a more marked narrowing than the smectic-A phase as k(φ) is reduced, implying that the flexibility has a destabilizing effect on the nematic and smectic-A phases. We also have investigated the anisotropic translational diffusion in liquid crystal phases and its temperature and flexibility dependence. In our study, we find that the phases formed, their statical and dynamic properties, as well as the transition properties are in close accord with those observations in real thermotropic liquid crystals. It is clear that both the rigid and semirigid models we used are valuable models with which to study the behavior of thermotropic liquid crystals using DPD algorithm.