Solid-Emission-Tunable Squaraine with Thermal-Promoted Aggregate-State Transitions for Fast Thermal History Sensing.

Determining thermal history is crucial in many industrial processes, but reliable and sensitive organic thermal history indicators are currently absent. Herein, we report on the development of a squaraine-based fluorescent molecule, DPEA-SQ, for the detection of thermal exposure histories up to 436 K. DPEA-SQ forms multiple single crystals (DPEA-SQ-I, DPEA-SQ-II, and DPEA-SQ-III) with different conformations and aggregate-state packing modes, contributing to their different fluorescence wavelengths, lifetimes, and efficiencies. Interestingly, DPEA-SQ-I and DPEA-SQ-III undergo aggregate-state structural transitions to form the thermodynamically more stable DPEA-SQ-II, which are accompanied by changes in their fluorescence. By taking advantage of similar aggregate-state structural transformations during heating, a high-temperature thermal exposure history of up to 436 K is recorded and reflected by their fluorescence. To demonstrate the potential practical applications of DPEA-SQ, a DPEA-SQ-Powder/PDMS film is prepared and coated on an electric circuit board, which enables real-time monitoring of localized overheating by the naked eye. Additionally, the fluorescence peaks of DPEA-SQ-Powder and DPEA-SQ-Powder/PDMS films remain unchanged after storage at 373 K for 52 days, demonstrating high aggregate-state stability. The fast and reliable responses of this system make it an excellent candidate for the detection of overtemperature traces in electronic components and circuit diagnosis.

Boosting Circularly Polarized Luminescence from Alkyl-Locked Axial Chirality Scaffold by Restriction of Molecular Motions.

Boosting the circularly polarized luminescence of small organic molecules has been a stubborn challenge because of weak structure rigidity and dynamic molecular motions. To investigate and eliminate these factors, here, we carried out the structure-property relationship studies on a newly-developed axial chiral scaffold of bidibenzo[b,d]furan. The molecular rigidity was finely tuned by gradually reducing the alkyl-chain length. The environmental factors were considered in solution, crystal, and polymer matrix at different temperatures. As a result, a significant amplification of the dissymmetry factor glum from 10-4 to 10-1 was achieved, corresponding to the situation from (R)-4C in solution to (R)-1C in polymer film at room temperature. A synergistic strategy of increasing the intramolecular rigidity and enhancing the intermolecular interaction to restrict the molecular motions was thus proposed to improve circularly polarized luminescence. The though-out demonstrated relationship will be of great importance for the development of high-performance small organic chiroptical systems in the future.

A facile strategy for the large-scale preparation of starch-based AIE luminescent nanoaggregates via host-guest interactions and their versatile applications.

Luminescent nanomaterials with outstanding optical properties have attracted growing interest due to their widespread applications. However, large-scale fabrication of luminescent nanomaterials with desired properties through a simple and economical process remains challenging. As a renewable natural resource, starch is non-toxic, easily accessible, and inexpensive, making it a popular choice for uses in various biomedical fields. In this work, we present a facile assembly strategy for the fabrication of starch-based luminescent nanoaggregates using starch as the host material and aggregation-induced emission luminogens (AIEgens) as guest molecules. By employing simple procedures under mild conditions, highly luminescent nanoparticles with small sizes, high water dispersibility, and low cytotoxicity are prepared on a large scale. The resulting nano-assemblies demonstrate significantly enhanced fluorescence intensities, reduced susceptibility to photobleaching and low cytotoxicity. These fluorescent supramolecular aggregates can be employed in various application fields, including the fabrication of fluorescent hydrogels, fingerprint detection, cell imaging and in vivo lymphatic system imaging. The methodology developed in this work has immense potential to greatly promote the production of high-quality nanoparticles on the industrial scale, offering a cost-effective solution that can meet the needs of various applications and pave the way for wider implementation of nanotechnology.

Advanced Soft Porous Organic Crystal with Multiple Gas-Induced Single-Crystal-to-Single-Crystal Transformations for Highly Selective Separation of Propylene and Propane.

Soft porous organic crystals with stimuli-responsive single-crystal-to-single-crystal (SCSC) transformations are important tools for unraveling their structural transformations at the molecular level, which is of crucial importance for the rapid development of stimuli-responsive systems. Carefully balancing the crystallinity and flexibility of materials is the prerequisite to construct advanced organic crystals with SCSC, which remains challenging. Herein, a squaraine-based soft porous organic crystal (SPOC-SQ) with multiple gas-induced SCSC transformations and temperature-regulated gate-opening adsorption of various C1-C3 hydrocarbons is reported. SPOC-SQ is featured with both crystallinity and flexibility, which enable pertaining the single crystallinity of the purely organic framework during accommodating gas molecules and directly unveiling gas-framework interplays by SCXRD technique. Thanks to the excellent softness of SPOC-SQ crystals, multiple metastable single crystals are obtained after gas removals, which demonstrates a molecular-scale shape-memory effect. Benefiting from the single crystallinity, the molecule-level structural evolutions of the SPOC-SQ crystal framework during gas departure are uncovered. With the unique temperature-dependent gate-opening structural transformations, SPOC-SQ exhibits distinctly different absorption behaviors towards C3 H6 and C3 H8 , and highly efficient and selective separation of C3 H6 /C3 H8 (v/v, 50/50) is achieved at 273 K. Such advanced soft porous organic crystals are of both theoretical values and practical implications.

An AIE-active bacterial inhibitor and photosensitizer for selective imaging, killing, and photodynamic inactivation of bacteria over mammalian cells.

Photodynamic therapy is becoming increasingly popular for combat of bacteria. In the clinical photodynamic combat of bacteria, one critical issue is to avoid the potential damage to the host since the reactive oxygen species produced by photosensitizers are also harmful to mammalian cells. In this work, we report an aggregation-induced-emission-active bacterial inhibitor and photosensitizer, OEO-TPE-MEM (OTM), for the imaging, killing, and light-enhanced inactivation of bacteria. OTM could efficiently bind to and kill Gram-positive bacteria, while its affinity to Gram-negative bacteria is lower, and a higher OTM concentration is required for killing Gram-negative bacteria. OTM is also an efficient photosensitizer and could efficiently sensitize the production of reactive oxygen species, which enhances its killing effect on both Gram-positive and Gram-negative bacteria. More interestingly, OTM is very biocompatible with normal mammalian cells both in the dark and under light irradiation. OTM in mice models with bacteria-infected wounds could promote the healing of infected wounds without affecting their organs and blood parameters, which makes it an excellent candidate for clinical applications.

Revealing molecular diffusion dynamics in polymer microspheres by optical resonances.

Understanding the diffusion of small molecules in polymer microsystems is of great interest in diverse fundamental and industrial research. Despite the rapidly advancing optical imaging and spectroscopic techniques, entities under investigation are usually limited to flat films or bulky samples. We demonstrate a route to in situ detection of diffusion dynamics in polymer micro-objects by means of optical whispering-gallery mode resonances. Through mode tracking, interactions between solvent molecules and polymer microspheres, including sorption, diffusion, and swelling can be quantitatively analyzed. A turning point of mode response is observed, while the diffusion exceeds the sub-wavelength-thick outermost layer as the radial extent of resonances and starts penetrating the inner core. The estimated solubility in the glassy polymer is consistent with the predicted value using Flory-Huggins theory. Besides, the non-Fickian contribution is analyzed in such a glassy polymer-penetrant system. Our work represents a high-precision and label-free approach to describing characteristics in diffusion dynamics.

Manipulating D-A interaction to achieve stable photoinduced organic radicals in triphenylphosphine crystals.

New strategies for the design and synthesis of stable organic radicals without additives are highly desirable. Herein, we design a series of donor-acceptor structured triarylphosphines and disclose the fast color change triggered by UV-irradiation in the crystalline state. Photoinduced organic radicals are undoubtedly verified and proved to be the reason for the color change by time-dependent and quantitative electron paramagnetic resonance analysis, X-ray crystallographic analysis, and theoretical calculations. It is revealed that the intrinsic symmetry breaking of peripheral architecture helps to form continuous molecular chains by donor-acceptor counterpart pairing. Intermolecular electron-transfer occurs among molecular chains and results in radical ion pairs upon photoirradiation.

Simultaneous Photodynamic Eradication of Tooth Biofilm and Tooth Whitening with an Aggregation-Induced Emission Luminogen.

Dental caries is among the most prevalent dental diseases globally, which arises from the formation of microbial biofilm on teeth. Besides, tooth whitening represents one of the fastest-growing areas of cosmetic dentistry. It will thus be great if tooth biofilm eradication can be combined with tooth whitening. Herein, a highly efficient photodynamic dental therapy strategy is reported for tooth biofilm eradication and tooth discoloration by employing a photosensitizer (DTTPB) with aggregation-induced emission characteristics. DTTPB can efficiently inactivate S. mutans, and inhibit biofilm formation by suppressing the expression of genes associated with extracellular polymeric substance synthesis, bacterial adhesion, and superoxide reduction. Its inhibition performance can be further enhanced through combined treatment with chlorhexidine. Besides, DTTPB exhibits an excellent tooth-discoloration effect on both colored saliva-coated hydroxyapatite and clinical teeth, with short treatment time (less than 1 h), better tooth-whitening performance than 30% hydrogen peroxide, and almost no damage to the teeth. DTTPB also demonstrates excellent biocompatibility with neglectable hemolysis effect on mouse red blood cells and almost no killing effect on mammalian cells, which enables its potential applications for simultaneous tooth biofilm eradication and tooth whitening in clinical dentistry.

Diradical-Featured Organic Small-Molecule Photothermal Material with High-Spin State in Dimers for Ultra-Broadband Solar Energy Harvesting.

Organic materials with radical characteristics are gaining increasing attention, due to their potential implications in highly efficient utilization of solar energy. Manipulating intermolecular interactions is crucial for tuning radical properties, as well as regulating their absorption bands, and thus improving the photothermal conversion efficiency. Herein, a diradical-featured organic small-molecule croconium derivative, CR-DPA-T, is reported for highly efficient utilization of solar energy. Upon aggregation, CR-DPA-T exists in dimer form, stabilized by the strong intermolecular π-π interactions, and exhibits a rarely reported high-spin state. Benefiting from the synergic effects of radical characteristics and strong intermolecular π-π interactions, CR-DPA-T powder absorbs broadly from 300 to 2000 nm. In-depth investigations with transient absorption analysis reveal that the strong intermolecular π-π interactions can promote nonradiative relaxation by accelerating internal conversion and facilitating intermolecular charge transfer (ICT) between dimeric molecules to open up faster internal conversion pathways. Remarkably, CR-DPA-T powder demonstrates a high photothermal efficiency of 79.5% under 808 nm laser irradiation. By employing CR-DPA-T as a solar harvester, a CR-DPA-T-loaded flexible self-healing poly(dimethylsiloxane) (H-PDMS) film, named as H-PDMS/CR-DPA-T self-healing film, is fabricated and employed for solar-thermal applications. These findings provide a feasible guideline for developing highly efficient diradical-featured organic photothermal materials.

A Membrane-Targeting Photosensitizer with Aggregation-Induced Emission Characteristics for Highly Efficient Photodynamic Combat of Human Coronaviruses.

COVID-19 pandemic, caused by severe acute respiratory syndrome coronavirus 2, has resulted in global social and economic disruption, putting the world economy to the largest global recession since the Great Depression. To control the spread of COVID-19, cutting off the transmission route is a critical step. In this work, the efficient inactivation of human coronavirus with photodynamic therapy (PDT) by employing photosensitizers with aggregation-induced emission characteristics (DTTPB) is reported. DTTPB is designed to bear a hydrophilic head and two hydrophobic tails, mimicking the structure of phospholipids on biological membranes. DTTPB demonstrates a broad absorption band covering the whole visible light range and high molar absorptivity, as well as excellent reactive oxygen species sensitizing ability, making it an excellent candidate for PDT. Besides, DTTPB can target membrane structure, and bind to the envelope of human coronaviruses. Upon light irradiation, DTTPB demonstrates highly effective antiviral behavior: human coronavirus treated with DTTPB and white-light irradiation can be efficiently inactivated with complete loss of infectivity, as revealed by the significant decrease of virus RNA and proteins in host cells. Thus, DTTPB sensitized PDT can efficiently prevent the infection and the spread of human coronavirus, which provides a new avenue for photodynamic combating of COVID-19.

Emission-Tunable Soft Porous Organic Crystal Based on Squaraine for Single-Crystal Analysis of Guest-Induced Gate-Opening Transformation.

Soft porous crystals (SPCs) with both crystallinity and flexibility have evolved as emerging materials for lots of applications. However, the development of purely organic SPCs (SPOCs) with advanced functionalities significantly lags behind. Herein, we report the construction of an emission-tunable SPOC with a rationally designed squaraine derivative (named as SPOC-SQ). SPOC-SQ is featured with a squaraine core and four peripheries with electron donor-π-acceptor (D-π-A) characteristics, which facilitates the formation of porous crystal framework stabilized by π-π interactions and H bonds and at the same time provides structural flexibility through phenyl rotations. This SPOC can be easily obtained from its dichloromethane (DCM) solution and exhibits reversible stimuli-responsive single-crystal-to-single-crystal (SCSC) structural transformation, accompanied by bright and tunable emission. In addition, this activated SPOC (SPOC-SQ-a) selectively recognizes and absorbs acetylene (C2H2) over other gases without destroying the single crystallinity, enabling the single-crystal XRD analysis of the structural transformation. Close inspection of single-crystal XRD results of SPOC-SQ-C2H2 facilitates the understanding of the host-guest interactions. More interestingly, upon interacting with C2H2, a one-dimensional (1D) channel is formed in the crystal to adopt C2H2, which proves the SCSC process and provides molecular-level insights into the gate-opening process. Furthermore, C2H2 adsorption dynamics can be monitored in real time by tracking the fluorescence wavelength changes of SPOC-SQ framework. Thus, the unique gate-opening sorption attribute of SPOC-SQ-a crystals toward C2H2 enables its potential applications for gas separation.

Fluorescent Materials With Aggregation-Induced Emission Characteristics for Array-Based Sensing Assay.

Array-based sensing is a powerful tool for identifying analytes in complex environments with unknown interferences. In array-based sensing, the sensors, which transduce binding details to signal outputs, are of crucial importance for identifying analytes. Aggregation-induced emission luminogens (AIEgens) enjoy the advantages of easy synthesis and high sensitivity, which enable them to facilely form a sensor pool through structural modifications and sensitively reflect the subtle changes associated with binding events. All these features make AIEgens excellent candidates for array-based sensing, and attempts have been made by several research groups to explore their potentials in array-based sensing. In this review, we introduce the recent progresses of employing AIEgens as sensors in sensing assays and in building up sensor arrays for identification of varied biological analytes, including biomolecules and bacteria. Examples are selected to illustrate the working mechanism, probe design and selection, capability of the sensor array, and implications of these sensing methods.

Fluorescence Self-Reporting Precipitation Polymerization Based on Aggregation-Induced Emission for Constructing Optical Nanoagents.

Precipitation polymerization is becoming increasingly popular in energy, environment and biomedicine. However, its proficient utilization highly relies on the mechanistic understanding of polymerization process. Now, a fluorescence self-reporting method based on aggregation-induced emission (AIE) is used to shed light on the mechanism of precipitation polymerization. The nucleation and growth processes during the copolymerization of a vinyl-modified AIEgen, styrene, and maleic anhydride can be sensitively monitored in real time. The phase-separation and dynamic hardening processes can be clearly discerned by tracking fluorescence changes. Moreover, polymeric fluorescent particles (PFPs) with uniform and tunable sizes can be obtained in a self-stabilized manner. These PFPs exhibit biolabeling and photosensitizing abilities and are used as superior optical nanoagents for photo-controllable immunotherapy, indicative of their great potential in biomedical applications.

Amphiphilic Tetraphenylethene-Based Pyridinium Salt for Selective Cell-Membrane Imaging and Room-Light-Induced Special Reactive Oxygen Species Generation.

The cell membrane is the protecting frontier of cells, which is crucial for maintaining cell integrity, and has a close relationship with cell growth and death. There is a growing need for cell membrane imaging and monitoring in both living and dying cells. Herein, we report a new amphiphilic tetraphenylethene-based pyridinium salt (TPE-MEM) with aggregation-induced emission features for discriminatory cell membrane imaging. The fluorogenic probe with high yield was synthesized following asymmetric McMurry reaction, Williamson ether synthesis reaction, Suzuki coupling, and aldol condensation between a double-charged pyridinium salt and hexyloxytetraphenylethene benzaldehyde. TPE-MEM shows good water solubility, biocompatibility, and cell membrane specificity. Interestingly, a reactive oxygen species (ROS) is produced by the molecule (TPE-MEM) under room-light irradiation, which could destroy the integrity of the plasma membrane and cause cell necrosis. This enables a visible observation of cell necrosis and the phototherapeutic effect under a mild condition. Preliminary animal investigations also demonstrated the photodynamic therapy (PDT) effectiveness of TPE-MEM in tumor growth inhibition. We conclude that TPE-MEM is potentially a cell membrane-selective photosensitizer for PDT and it is worthy of further exploration of the phototherapeutic effect on animals systematically.

Imaging Macrophage Phagocytosis Using AIE Luminogen-Labeled E.†coli.

Phagocytosis of bacteria is an important biological process. Gaining insight into this process may greatly benefit related pathological studies and further contribute to development of therapies for infectious diseases. Tools for studying these internalization processes, however, are limited. Herein, we demonstrate the feasibility of employing an environmentally sensitive aggregation-induced emission (AIE) probe for bacteria labeling and imaging. By tracking the fluorescence variation of the stained bacteria, the pH changes of its microenvironment can be monitored. In this way, the phagocytic entry of these bacteria into the macrophage cells and the intravacuolar acidification can be visualized in real-time.

Photocontrolled SiRNA Delivery and Biomarker-Triggered Luminogens of Aggregation-Induced Emission by Up-Conversion NaYF4:Yb3+Tm3+@SiO2 Nanoparticles for Inducing and Monitoring Stem-Cell Differentiation.

Controlling the differentiation of stem cells and monitoring cell differentiation has attracted much research interest since the discovery of stem cells. In this regard, a novel near-infrared (NIR) light-activated nanoplatform is obtained by encapsulating the photoactivatable caged compound (DMNPE/siRNA) and combining a MMP13 cleaved imaging peptide-tetrapheny-lethene (TPE) unit conjugated with the mesoporous silica-coated up-conversion nanoparticles (UCNPs) for the remote control of cell differentiation and, simultaneously, for the real-time monitoring of differentiation. Upon NIR light illumination, the photoactivated caged compound is activated, and the siRNA is released from UCNPs, allowing controlled differentiation of stem cells by light. More importantly, MMP13 enzyme triggered by osteogenic differentiation would effectively cleave the TPE probe peptide, thereby allowing the real-time monitoring of differentiation in living stem cells by aggregation-induced emission (AIE).

AIE-active theranostic system: selective staining and killing of cancer cells.

Cancer is the leading cause of death worldwide. With the advantages of low cost, high sensitivity and ease of accessibility, fluorescence imaging has been widely used for cancer detection in the scientific field. Aggregation-induced emission luminogens (AIEgens) are a class of synthesized fluorescent probes with high brightness and photostability in the aggregate state. Herein, a new positively-charged AIEgen, abbreviated as TPE-IQ-2O, is designed and characterized. TPE-IQ-2O not only can distinguish cancer cells from normal cells with high contrast with the aid of the difference in mitochondrial membrane potential as well as the quantity of mitochondria, but it also works as a promising photosensitizer to kill cancer cells through generation of reactive oxygen species upon white light irradiation, thus making it a promising AIE theranostic system.

Single-probe multistate detection of DNA via aggregation-induced emission on a graphene oxide platform.

Graphene and graphene oxides (GO), or their reduced forms, have been introduced in a variety of biosensing platforms and have exhibited enhanced performance levels in these forms. We herein report a DNA sensing platform consisting of aggregation-induced emission (AIE) molecules and complementary DNA (comDNA) adsorbed on GO. We experimentally turned the AIE molecule on and off by adjusting its distance, which correlates with DNA structures as shown in our computational results, from the GO sheet, which quenches depending on its distance from the graphene plane. The changes in florescence are reproducible, which demonstrates the probe's ability to identify the binding state of the DNA. Our molecular dynamics simulation results reveal strong π-π interactions between single-strand DNA (ssDNA) and GO, which enable the ssDNA molecule to move closer to the graphene oxide. This reduces the center of mass and binding free energies in the simulation. When hybridized with comDNA, the increased distance, evidenced by the reduced interaction, eliminates the quenching effect and turns on the AIE molecule. Our protocol use of the AIE molecule as a probe thus avoids the complicated steps involved in covalent functionalization and allows the rapid and label-free detection of DNA molecules. STATEMENT OF SIGNIFICANCE: A simple, rapid method of fluorescent measurement of DNA hybridization in the presence of graphene (oxide) is presented. Conventional fluorescent dyes offer high performance in biosensors. However, labeling procedures are synthetically demanding in time and resources making it less cost-effective. Molecules with aggregation-induced-emission (AIE) property have advantages over traditional fluorescent molecules because of their intrinsic preference for detection as a turn-on probe and their single-molecule detection ability. Previous work has shown AIE dyes act as excellent "label-free" bioprobes with high sensitivity but with limited selectivity. Graphene oxide (GO) with its unique optical properties and affinity to different kinds of biomolecules can be used as an auxiliary to enhance selectivity of AIE dyes. In this work, we report a label-free strategy to detect DNA of particular sequence by water-soluble AIE probes with the aid of GO, supported by the computational explanations for this phenomenon.

A Mitochondrion-Specific Photoactivatable Fluorescence Turn-On AIE-Based Bioprobe for Localization Super-Resolution Microscope.

A novel mitochondrion-specific photo-activatable fluorescence turn-on bioprobe, named as o-TPE-ON+, is designed and readily prepared, operating through a new photoactivatable mechanism of photocyclodehydrogenation. This bioprobe exhibits unique photoactivation behavior in cells, and is applied to super-resolution imaging of mitochondrion and its dynamic investigation in both fixed and live cells under physiological conditions without any external additives.

Specific Fluorescence Probes for Lipid Droplets Based on Simple AIEgens.

Lipid droplets (LDs), as dynamic complex organelles, are involved in various physiological processes, and their numbers and activity are related to many diseases, even cancer. Hence, locating and concentration monitoring of LDs are very important to scientific bioresearch and health care. In this work, we prepared two simple luminogens (FAS and DPAS) via very facile synthetic procedures and purification. They feature aggregation-induced emission and excited state intramolecular proton transfer characteristics. They exhibit large Stokes shifts and bright orange and yellow emissions in the aggregated state, and the emissions can be reversibly turned "off" and "on" for many cycles by controlling buffer pH values. Both FAS and DPAS are cytocompatible and can selectively accumulate in and light up the LDs in living cells with superior resolution and high contrast. They also outperform the commercial LD probes in terms of photostability. Combining the advantages of high LD-specificity, good biocompatibility, surperb photostability, and low preparation cost, FAS and DPAS may become powerful tools to the study on LDs-related intracellular activities, such as LDs-based pathology and pharmacology.