Suppressing Exciton-Vibration Coupling to Prolong Exciton Lifetime of Nonfullerene Acceptors Enables High-Efficiency Organic Solar Cells.

The limited exciton lifetime (τ, generally <1 ns) leads to short exciton diffusion length (LD ) of organic semiconductors, which is the bottleneck issue impeding the further improvement of power conversion efficiencies (PCEs) for organic solar cells (OSCs). However, efficient strategies to prolong intrinsic τ are rare and vague. Herein, we propose a facile method to efficiently reduce vibrational frequency of molecular skeleton and suppress exciton-vibration coupling to decrease non-radiative decay rate and thus prolong τ via deuterating nonfullerene acceptors. The τ remarkably increases from 0.90 ns (non-deuterated L8-BO) to 1.35 ns (deuterated L8-BO-D), which is the record for organic photovoltaic materials. Besides, the inhibited molecular vibration improves molecular planarity of L8-BO-D for enhanced exciton diffusion coefficient. Consequently, the LD increases from 7.9 nm (L8-BO) to 10.7 nm (L8-BO-D). The prolonged LD of L8-BO-D enables PM6 : L8-BO-D-based bulk heterojunction OSCs to acquire higher PCEs of 18.5 % with more efficient exciton dissociation and weaker charge carrier recombination than PM6 : L8-BO-based counterparts. Moreover, benefiting from the prolonged LD , D18/L8-BO-D-based pseudo-planar heterojunction OSCs achieve an impressive PCE of 19.3 %, which is among the highest values. This work provides an efficient strategy to increase the τ and thus LD of organic semiconductors, boosting PCEs of OSCs.

Manipulating Vertical Phase Separation Enables Pseudoplanar Heterojunction Organic Solar Cells Over 19% Efficiency via Ternary Polymerization.

Controlling vertical phase separation of the active layer to enable efficient exciton dissociation and charge carrier transport is crucial to boost power conversion efficiencies (PCEs) of pseudoplanar heterojunction (PPHJ) organic solar cells (OSCs). However, how to optimize the vertical phase separation of PPHJ OSCs via molecule design is rarely reported yet. Herein, ternary polymerization strategy is employed to develop a series of polymer donors, DL1-DL4, and regulate their solubility, molecular aggregation, molecular orientation, and miscibility, thus efficiently manipulating vertical phase separation in PPHJ OSCs. Among them, DL1 not only has enhanced solubility, inhibited molecular aggregation and partial edge-on orientation to facilitate acceptor molecules, Y6, to permeate into polymer layer and increase donor/acceptor interfaces, but also sustains high crystallinity and appropriate miscibility with Y6 to acquire ordered molecular packing, thus achieving optimized vertical phase separation to well juggle exciton dissociation and charge transport in PPHJ devices. Therefore, DL1/Y6 based PPHJ OSCs gain the best exciton dissociation probability, highest charge carrier mobilities and weakest charge recombination, and thus afford an impressive PCE of 19.10%, which is the record value for terpolymer donors. It demonstrates that ternary polymerization is an efficient method to optimize vertical phase separation in PPHJ OSCs for high PCEs.

Trap suppression in ordered organic photovoltaic heterojunctions.

The high trap density (generally 1016-1018 cm-3) in organic solar cells (OSCs) brings about the localization of charge carriers and reduced charge carrier lifetime, mainly due to the weak intermolecular interactions of organic semiconductors resulting in their relatively poor crystallinity, which leads to low charge carrier mobilities and intense non-radiative recombination, thus impeding the further improvement of power conversion efficiencies (PCEs). Therefore, trap suppression is crucial to boost the performance of OSCs, and improving the crystallinity of donor/acceptor materials and enhancing the molecular order in devices can contribute to the trap suppression in OSCs. In this feature article, we summarize the recent advances of trap suppression in OSCs by material design and device engineering, and further outline possible development directions for trap suppression to enhance PCEs of OSCs.

Fullerene-Liquid-Crystal-Induced Micrometer-Scale Charge-Carrier Diffusion in Organic Bulk Heterojunction.

The short charge-carrier diffusion length (LD ) (100-300 nm) in organic bulk heterojunction (BHJ) impedes the further improvement in power conversion efficiency (PCE) of organic solar cells (OSCs), especially for thick-film (>400 nm) devices matching with industrial solution processing. Here a facile method is developed to efficiently increase LD and then improve PCEs of OSCs via introducing a fullerene liquid crystal, F1, into the active layer. F1 combines the inherent high electron mobility of fullerene and strong self-assembly capacity of liquid crystal, providing a fast channel for charge-carrier transport and reducing energetic disorder and trap density in BHJ film via enhancing crystallization. Typically, in PM6:Y6:F1 BHJ, the enhanced charge-carrier mobility (>10-2 cm-2 V-1 s-1 ) and prolonged charge-carrier lifetime (55.3 µs) are acquired to realize the record LD of 1.6 or 2.4 µm for electron or hole, respectively, which are much higher than those of the PM6:Y6 binary sample and comparable to or even better than those values reported for some inorganic/hybrid materials, such as CuInx Ga(1- x ) Se2 (CIGS) and perovskite thin films. Benefitting from the micrometer-scale LD , the PM6:Y6:F1 ternary OSCs sustain a remarkable PCE of 15.23% with the active layer thickness approaching 500 nm.

Reducing Trap Density in Organic Solar Cells via Extending the Fused Ring Donor Unit of an A-D-A-Type Nonfullerene Acceptor for Over 17% Efficiency.

The high trap density (generally 1016 to 1018  cm-3 ) in thin films of organic semiconductors is the primary reason for the inferior charge-carrier mobility and large nonradiative recombination energy loss (ΔEnr ) in organic solar cells (OSCs), limiting improvement in power conversion efficiencies (PCEs). In this study, the trap density in OSCs is efficiently reduced via extending the donor core of nonfullerene acceptors (NFAs) from a heptacyclic unit to a nonacyclic unit. TTPIC-4F with a nonacyclic unit has stronger intramolecular and intermolecular interactions, affording higher crystallinity in thin films relative to its counterpart BTPIC-4F. Thus, the D18:TTPIC-4F-based device achieves a lower trap density of 4.02 × 1015  cm-3 , comparable to some typical high-performance inorganic/hybrid semiconductors, with higher mobility and inhibited charge-carrier recombination in devices. Therefore, the D18:TTPIC-4F-based OSC exhibits an impressive PCE of 17.1% with a low ΔEnr of 0.208 eV, which is the best known value for A-D-A-type NFAs. Therefore, extending the donor core of NFAs is an efficient method for suppressing trap states in OSCs for high PCEs.

Balanced Partnership between Donor and Acceptor Components in Nonfullerene Organic Solar Cells with >12% Efficiency.

Relative to electron donors for bulk heterojunction organic solar cells (OSCs), electron acceptors that absorb strongly in the visible and even near-infrared region are less well developed, which hinders the further development of OSCs. Fullerenes as traditional electron acceptors have relatively weak visible absorption and limited electronic tunability, which constrains the optical and electronic properties required of the donor. Here, high-performance fullerene-free OSCs based on a combination of a medium-bandgap polymer donor (FTAZ) and a narrow-bandgap nonfullerene acceptor (IDIC), which exhibit complementary absorption, matched energy levels, and blend with pure phases on the exciton diffusion length scale, are reported. The single-junction OSCs based on the FTAZ:IDIC blend exhibit power conversion efficiencies up to 12.5% with a certified value of 12.14%. Transient absorption spectroscopy reveals that exciting either the donor or the acceptor component efficiently generates mobile charges, which do not suffer from recombination to triplet states. Balancing photocurrent generation between the donor and nonfullerene acceptor removes undesirable constraints on the donor imposed by fullerene derivatives, opening a new avenue toward even higher efficiency for OSCs.

Matching Charge Extraction Contact for Wide-Bandgap Perovskite Solar Cells.

Efficient wide-bandgap (WBG) perovskite solar cells are needed to boost the efficiency of silicon solar cells to beyond Schottky-Queisser limit, but they suffer from a larger open circuit voltage (VOC ) deficit than narrower bandgap ones. Here, it is shown that one major limitation of VOC in WBG perovskite solar cells comes from the nonmatched energy levels of charge transport layers. Indene-C60 bisadduct (ICBA) with higher-lying lowest-unoccupied-molecular-orbital is needed for WBG perovskite solar cells, while its energy-disorder needs to be minimized before a larger VOC can be observed. A simple method is applied to reduce the energy disorder by isolating isomer ICBA-tran3 from the as-synthesized ICBA-mixture. WBG perovskite solar cells with ICBA-tran3 show enhanced VOC by 60 mV, reduced VOC deficit of 0.5 V, and then a record stabilized power conversion efficiency of 18.5%. This work points out the importance of matching the charge transport layers in perovskite solar cells when the perovskites have a different composition and energy levels.

Single-Junction Binary-Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency.

A new fluorinated nonfullerene acceptor, ITIC-Th1, has been designed and synthesized by introducing fluorine (F) atoms onto the end-capping group 1,1-dicyanomethylene-3-indanone (IC). On the one hand, incorporation of F would improve intramolecular interaction, enhance the push-pull effect between the donor unit indacenodithieno[3,2-b]thiophene and the acceptor unit IC due to electron-withdrawing effect of F, and finally adjust energy levels and reduce bandgap, which is beneficial to light harvesting and enhancing short-circuit current density (JSC ). On the other hand, incorporation of F would improve intermolecular interactions through CF···S, CF···H, and CF···π noncovalent interactions and enhance electron mobility, which is beneficial to enhancing JSC and fill factor. Indeed, the results show that fluorinated ITIC-Th1 exhibits redshifted absorption, smaller optical bandgap, and higher electron mobility than the nonfluorinated ITIC-Th. Furthermore, nonfullerene organic solar cells (OSCs) based on fluorinated ITIC-Th1 electron acceptor and a wide-bandgap polymer donor FTAZ based on benzodithiophene and benzotriazole exhibit power conversion efficiency (PCE) as high as 12.1%, significantly higher than that of nonfluorinated ITIC-Th (8.88%). The PCE of 12.1% is the highest in fullerene and nonfullerene-based single-junction binary-blend OSCs. Moreover, the OSCs based on FTAZ:ITIC-Th1 show much better efficiency and better stability than the control devices based on FTAZ:PC71 BM (PCE = 5.22%).

Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells.

We design and synthesize four fused-ring electron acceptors based on 6,6,12,12-tetrakis(4-hexylphenyl)-indacenobis(dithieno[3,2-b;2',3'-d]thiophene) as the electron-rich unit and 1,1-dicyanomethylene-3-indanones with 0-2 fluorine substituents as the electron-deficient units. These four molecules exhibit broad (550-850 nm) and strong absorption with high extinction coefficients of (2.1-2.5) × 105 M-1 cm-1. Fluorine substitution downshifts the LUMO energy level, red-shifts the absorption spectrum, and enhances electron mobility. The polymer solar cells based on the fluorinated electron acceptors exhibit power conversion efficiencies as high as 11.5%, much higher than that of their nonfluorinated counterpart (7.7%). We investigate the effects of the fluorine atom number and position on electronic properties, charge transport, film morphology, and photovoltaic properties.

Mapping Polymer Donors toward High-Efficiency Fullerene Free Organic Solar Cells.

Five polymer donors with distinct chemical structures and different electronic properties are surveyed in a planar and narrow-bandgap fused-ring electron acceptor (IDIC)-based organic solar cells, which exhibit power conversion efficiencies of up to 11%.

Gd@C82-(ethylenediamine)8 Nanoparticle: A New High-Efficiency Water-Soluble ROS Scavenger.

It is important to maintain a reactive oxygen species (ROS) balance in organisms; thus, a valid ROS scavenger with good biocompatibility is urgently required. To prepare a high-efficiency ROS scavenger, multiple ethylenediamine (EDA) groups are bonded for the first time to a metallofullerene Gd@C82 to obtain water-soluble Gd@C82-(EDA)8 nanoparticles (NPs) through a facile solid-liquid reaction. Gd@C82-(EDA)8 NPs with a relatively better conjugation possess an excellent capability to scavenge hydroxyl radicals. Moreover, Gd@C82-(EDA)8 NPs exhibited a remarkable cytoprotective effect against H2O2-induced injuries to human epidermal keratinocytes-adult (HEK-a) cells at a low concentration of 2.5 µM. In contrast, Gd@C82-(OH)26 NPs that modified with hydroxyls show an apparent protective effect at a much higher concentration of 40 µM. This outstanding cytoprotective performance of Gd@C82-(EDA)8 NPs is mainly attributed to their extremely high cellular uptake and comparably strong conjugation. Gd@C82-(EDA)8 NPs with good biocompatibility exhibit excellent ROS scavenging capability even at a significantly low concentration, which promotes its versatile applications in cosmetics and biomedicine.

High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics.

We develop an efficient fused-ring electron acceptor (ITIC-Th) based on indacenodithieno[3,2-b]thiophene core and thienyl side-chains for organic solar cells (OSCs). Relative to its counterpart with phenyl side-chains (ITIC), ITIC-Th shows lower energy levels (ITIC-Th: HOMO = -5.66 eV, LUMO = -3.93 eV; ITIC: HOMO = -5.48 eV, LUMO = -3.83 eV) due to the σ-inductive effect of thienyl side-chains, which can match with high-performance narrow-band-gap polymer donors and wide-band-gap polymer donors. ITIC-Th has higher electron mobility (6.1 × 10(-4) cm(2) V(-1) s(-1)) than ITIC (2.6 × 10(-4) cm(2) V(-1) s(-1)) due to enhanced intermolecular interaction induced by sulfur-sulfur interaction. We fabricate OSCs by blending ITIC-Th acceptor with two different low-band-gap and wide-band-gap polymer donors. In one case, a power conversion efficiency of 9.6% was observed, which rivals some of the highest efficiencies for single junction OSCs based on fullerene acceptors.

A Facile Planar Fused-Ring Electron Acceptor for As-Cast Polymer Solar Cells with 8.71% Efficiency.

A planar fused-ring electron acceptor (IC-C6IDT-IC) based on indacenodithiophene is designed and synthesized. IC-C6IDT-IC shows strong absorption in 500-800 nm with extinction coefficient of up to 2.4 × 10(5) M(-1) cm(-1) and high electron mobility of 1.1 × 10(-3) cm(2) V(-1) s(-1). The as-cast polymer solar cells based on IC-C6IDT-IC without additional treatments exhibit power conversion efficiencies of up to 8.71%.