Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Language
Publication year range
1.
IEEE Trans Ultrason Ferroelectr Freq Control ; 70(10): 1229-1238, 2023 Oct.
Article in English | MEDLINE | ID: mdl-37027530

ABSTRACT

This work describes the implementation of acoustic metamaterials (AMs) made of a forest of rods at the sides of a suspended aluminum scandium nitride (AlScN) contour-mode resonator (CMR) to increase its power handling without causing degradations of its electromechanical performance. The increase in usable anchoring perimeter with respect to conventional CMR designs, enabled by the adoption of two AM-based lateral anchors, permits to achieve improved heat conduction from the resonator's active region to the substrate. Furthermore, thanks to such AM-based lateral anchors' unique acoustic dispersion features, the attained increase of anchored perimeter does not cause any degradations of the CMR's electromechanical performance, even leading to a ~15% improvement in the measured quality factor. Finally, we experimentally show that using our AM-based lateral anchors leads to a more linear CMR's electrical response, which is enabled by a 32% reduction of its Duffing nonlinear coefficient with respect to the corresponding value attained by a conventional CMR design that uses fully etched lateral sides.

2.
Micromachines (Basel) ; 14(3)2023 Feb 23.
Article in English | MEDLINE | ID: mdl-36984922

ABSTRACT

The increasing use of mobile broadband requires new acoustic filtering technologies that can operate efficiently at frequencies above 6 GHz. Previous research has shown that AlN Super High Frequency (SHF) Cross-Sectional Lamé Mode resonators (CLMRs) can address this challenge, but their performance is limited by the piezoelectric strength of AlN. In this work, we explore the use of substitutional doping of Al in AlN with Sc to enhance the kt2 values of SHF CLMRs. Our results showed that the measured kt2·Qm product of Al72Sc28N CLMRs was four times greater than that of AlN CLMRs operating at the same frequency. Additionally, the measured fractional bandwidth (FWB) of Al72Sc28N 2nd order ladder filters was 4.13%, a fourfold improvement over AlN filters with the same design. We also discuss other aspects of the technology, such as power handling, losses, and spurious mode suppression, and identify potential areas for future research.

3.
Micromachines (Basel) ; 13(6)2022 May 31.
Article in English | MEDLINE | ID: mdl-35744493

ABSTRACT

Sc-doped aluminum nitride is emerging as a new piezoelectric material which can substitute undoped aluminum nitride (AlN) in radio-frequency MEMS applications, thanks to its demonstrated enhancement of the piezoelectric coefficients. Furthermore, the recent demonstration of the ferroelectric-switching capability of the material gives AlScN the possibility to integrate memory functionalities in RF components. However, its high-coercive field and high-leakage currents are limiting its applicability. Residual stress, growth on different substrates, and testing-temperature have already been demonstrated as possible knobs to flatten the energy barrier needed for switching, but no investigation has been reported yet on the whole impact on the dielectric and ferroelectric dynamic behavior of a single process parameter. In this context, we analyze the complete spectrum of variations induced by the applied substrate-RF, from deposition characteristics to dielectric and ferroelectric properties, proving its effect on all of the material attributes. In particular, we demonstrate the possibility of engineering the AlScN lattice cell to properly modify leakage, breakdown, and coercive fields, as well as polarization charge, without altering the crystallinity level, making substrate-RF an effective and efficient fabrication knob to ease the limitations the material is facing.

4.
Nanoscale ; 13(4): 2181-2208, 2021 Feb 04.
Article in English | MEDLINE | ID: mdl-33480942

ABSTRACT

The past decade has seen a tremendous development of organic solar cells (OSCs). To date, high-performance OSCs have boosted power conversion efficiencies (PCEs) over 17%, showing bright prospects toward commercial applications. Compared with binary OSCs, ternary OSCs, by introducing a third component as a second donor or acceptor into the active layer, have great potential in realizing outstanding photovoltaic performance. Herein, a comprehensive review of the recent advances of ternary solar cells is presented. According to the chemical components of active layer materials, we classify the ternary systems into four categories, including polymer/small molecule/small molecule, polymer/polymer/small molecule, all-polymer and all-small-molecule types. The relationships among the photovoltaic materials structure and weight ratio, active layer morphology and photovoltaic performance are systematically analyzed and summarized. The features and design strategies of each category are also discussed and summarized. Key issues and challenges faced in ternary OSCs are pointed out, and potential strategies and solutions are proposed. This review may provide guidance for the field of ternary OSCs.

5.
ACS Sens ; 3(12): 2499-2505, 2018 12 28.
Article in English | MEDLINE | ID: mdl-30358986

ABSTRACT

Sodium flux plays a pivotal role in neurobiological processes including initiation of action potentials and regulation of neuronal cell excitability. However, unlike the wide range of fluorescent calcium indicators used extensively for cellular studies, the choice of sodium probes remains limited. We have previously demonstrated optode-based nanosensors (OBNs) for detecting sodium ions with advantageous modular properties such as tunable physiological sensing range, full reversibility, and superb selectivity against key physiological interfering ion potassium. (1) Motivated by bridging the gap between the great interest in sodium imaging of neuronal cell activity as an alternative to patch clamp and limited choices of optical sodium indicators, in this Letter we report the application of nanosensors capable of detecting intracellular sodium flux in isolated rat dorsal root ganglion neurons during electrical stimulation using transparent microelectrodes. Taking advantage of the ratiometric detection scheme offered by this fluorescent modular sensing platform, we performed dual color imaging of the sensor to monitor the intracellular sodium currents underlying trains of action potentials in real time. The combination of nanosensors and microelectrodes for monitoring neuronal sodium dynamics is a novel tool for investigating the regulatory role of sodium ions involved during neural activities.


Subject(s)
Fluorescent Dyes/chemistry , Nanostructures/chemistry , Neurons/metabolism , Sodium/metabolism , Animals , Electrochemical Techniques/instrumentation , Electrochemical Techniques/methods , Fluorescence , Ganglia, Spinal/metabolism , Gold/chemistry , Male , Microelectrodes , Polystyrenes/chemistry , Rats, Sprague-Dawley , Rhodamines/chemistry , Thiophenes/chemistry
6.
Sci Adv ; 4(9): eaat0626, 2018 09.
Article in English | MEDLINE | ID: mdl-30191176

ABSTRACT

Transparent microelectrode arrays have emerged as increasingly important tools for neuroscience by allowing simultaneous coupling of big and time-resolved electrophysiology data with optically measured, spatially and type resolved single neuron activity. Scaling down transparent electrodes to the length scale of a single neuron is challenging since conventional transparent conductors are limited by their capacitive electrode/electrolyte interface. In this study, we establish transparent microelectrode arrays with high performance, great biocompatibility, and comprehensive in vivo validations from a recently developed, bilayer-nanomesh material composite, where a metal layer and a low-impedance faradaic interfacial layer are stacked reliably together in a same transparent nanomesh pattern. Specifically, flexible arrays from 32 bilayer-nanomesh microelectrodes demonstrated near-unity yield with high uniformity, excellent biocompatibility, and great compatibility with state-of-the-art wireless recording and real-time artifact rejection system. The electrodes are highly scalable, with 130 kilohms at 1 kHz at 20 µm in diameter, comparable to the performance of microelectrodes in nontransparent Michigan arrays. The highly transparent, bilayer-nanomesh microelectrode arrays allowed in vivo two-photon imaging of single neurons in layer 2/3 of the visual cortex of awake mice, along with high-fidelity, simultaneous electrical recordings of visual-evoked activity, both in the multi-unit activity band and at lower frequencies by measuring the visual-evoked potential in the time domain. Together, these advances reveal the great potential of transparent arrays from bilayer-nanomesh microelectrodes for a broad range of utility in neuroscience and medical practices.


Subject(s)
Brain/diagnostic imaging , Brain/physiology , Electrophysiology/instrumentation , Microelectrodes , Nanostructures/chemistry , Animals , Calcium/analysis , Dielectric Spectroscopy/instrumentation , Dielectric Spectroscopy/methods , Electrodes, Implanted , Electrophysiology/methods , Gold/chemistry , Male , Mice, Inbred C57BL , Molecular Imaging , Photic Stimulation , Photons , Polystyrenes/chemistry , Thiophenes/chemistry , Visual Cortex/diagnostic imaging , Visual Cortex/physiology , Wireless Technology
SELECTION OF CITATIONS
SEARCH DETAIL
...