Spiking Neural Membrane Systems with Adaptive Synaptic Time Delay.

Spiking neural membrane systems (or spiking neural P systems, SNP systems) are a new type of computation model which have attracted the attention of plentiful scholars for parallelism, time encoding, interpretability and extensibility. The original SNP systems only consider the time delay caused by the execution of rules within neurons, but not caused by the transmission of spikes via synapses between neurons and its adaptive adjustment. In view of the importance of time delay for SNP systems, which are a time encoding computation model, this study proposes SNP systems with adaptive synaptic time delay (ADSNP systems) based on the dynamic regulation mechanism of synaptic transmission delay in neural systems. In ADSNP systems, besides neurons, astrocytes that can generate adenosine triphosphate (ATP) are introduced. After receiving spikes, astrocytes convert spikes into ATP and send ATP to the synapses controlled by them to change the synaptic time delays. The Turing universality of ADSNP systems in number generating and accepting modes is proved. In addition, a small universal ADSNP system using 93 neurons and astrocytes is given. The superiority of the ADSNP system is demonstrated by comparison with the six variants. Finally, an ADSNP system is constructed for credit card fraud detection, which verifies the feasibility of the ADSNP system for solving real-world problems. By considering the adaptive synaptic delay, ADSNP systems better restore the process of information transmission in biological neural networks, and enhance the adaptability of SNP systems, making the control of time more accurate.

Physical Grinding of Prefabricated Co3O4 and MCM-22 Zeolite for Fischer-Tropsch Synthesis: Impact of Pretreatment Procedure on the Dispersion and Catalytic Performance.

To improve the mess-specific activity of Co supported on zeolite catalysts in Fischer-Tropsch (FT) synthesis, the Co-MCM-22 catalyst was prepared by simply grinding the MCM-22 with nanosized Co3O4 prefabricated by the thermal decomposition of the Co(II)-glycine complex. It is found that this novel strategy is effective for improving the mess-specific activity of Co catalysts in FT synthesis compared to the impregnation method. Moreover, the ion exchange and calcination sequence of MCM-22 has a significant influence on the dispersion, particle size distribution, and reduction degree of Co. The Co-MCM-22 prepared by the physical grinding of prefabricated Co3O4 and H+-type MCM-22 without a further calcination process exhibits a moderate interaction between Co3O4 and MCM-22, which results in the higher reduction degree, higher dispersion, and higher mess-specific activity of Co. Thus, the newly developed method is more controllable and promising for the synthesis of metal-supported catalysts.

A Neutrophil Hijacking Nanoplatform Reprograming NETosis for Targeted Microglia Polarizing Mediated Ischemic Stroke Treatment.

Precise and efficient regulation of microglia is vital for ischemic stroke therapy and prognosis. The infiltration of neutrophils into the brain provides opportunities for regulatory drugs across the blood-brain barrier, while hindered by neutrophil extracellular traps (NETs) and targeted delivery of intracerebral drugs to microglia. This study reports an efficient neutrophil hijacking nanoplatform (referred to as APTS) for targeted A151 (a telomerase repeat sequence) delivery to microglia without the generation of NETs. In the middle cerebral artery occlusion (MCAO) mouse model, the delivery efficiency to ischemic stroke tissues increases by fourfold. APTS dramatically reduces the formation of NETs by 2.2-fold via reprogramming NETosis to apoptosis in neutrophils via a reactive oxygen species scavenging-mediated citrullinated histone 3 inhibition pathway. Noteworthy, A151 within neutrophils is repackaged into apoptotic bodies following the death pattern reprogramming, which, when engulfed by microglia, polarizes microglia to an anti-inflammatory M2 phenotype. After four times treatment, the cerebral infarction area in the APTS group decreases by 5.1-fold. Thus, APTS provides a feasible, efficient, and practical drug delivery approach for reshaping the immune microenvironment and treating brain disorders in the central nervous system.

Circularly polarized blue fluorescence based on chiral heteroleptic six-coordinate bis-pyrazolonate-Zn2+ complexes.

Applying molecular design to chiral organo-Zn2+ complexes, a new pair of chiral heteroleptic bis-pyrazolonate-Zn2+ enantiomers [Zn(PMBP)2(1R,2R-Chxn)] (R,R-Zn2+; HPMBP = 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone and 1R,2R-Chxn = (1R,2R)-cyclohexane-1,2-diamine) and [Zn(PMBP)2(1S,2S-Chxn)] (S,S-Zn2+; 1S,2S-Chxn = (1S,2S)-cyclohexane-1,2-diamine) have been synthesized and characterized in terms of photophysical and thermodynamic properties. In addition to a small Flack parameter (0.05(3)) associated with the solid-state elucidation of S,S-Zn2+, the circular dichroism (CD) and circularly polarized light (CPL) spectra for the chiral Zn2+ enantiomers show perfect mirror symmetry, establishing that the enantiopure 1,2-diamines successfully induce the optical isomerism of R,R-Zn2+ and S,S-Zn2+. As a result of the combined strong chiral induction capability of chiral 1,2-diamines and excellent photophysical properties of the pyrazolone ligand (PMBP)-, the two Zn2+ enantiomers exhibit high-quality pure blue fluorescence (ΦPL = 9-10%) and significant CPL activity (|glum| = 0.0065-0.0068). The heteroleptic strategy adopted in this study offers a new route to develop high-performance chiroptical luminophores.

Preparation and Application of Polymer-Dispersed Liquid Crystal Film with Step-Driven Display Capability.

The realization of multifunctional advanced displays with better electro-optical properties is especially crucial at present. However, conventional integral full drive-based transparent display is increasingly failing to meet the demands of the day. Herein, partitioned polymerization as a novel preparation method was introduced innovatively into polymer-dispersed liquid crystals (PDLC) for realizing a step-driven display in agreement with fluorescent dye to solve the above drawback. At first, the utilization of fluorescent dye to endow the PDLC film with fluorescent properties resulted in a reduction in the saturation voltage of the PDLC from 39.7 V to 25.5 V and an increase in the contrast ratio from 58.4 to 96.6. Meanwhile, the experimental observations and theoretical considerations have elucidated that variation in microscopic pore size can significantly influence the electro-optical behavior of PDLC. Then, the step-driven PDLC film was fabricated through the exposure of different regions of the LC cell to different UV-light intensities, resulting in stepwise voltage-transmittance (V-T) responses of the PDLC film for the corresponding regions. Consequently, under appropriate driving voltages, the PDLC can realize three different states of total scattering, semi-transparent and total transparent, respectively. In addition, the PDLC film also embodied an outstanding anti-aging property and UV-shielding performance, which makes it fascinating for multifunctional advanced display applications.

Preparation and Characterization of Bilayer Polymer-Dispersed Liquid Crystals Doped with Gd2O3 Nanoparticles and Rhodamine B Base Fluorescent Dye.

Using the polymerization-induced phase separation (PIPS) method, bilayer polymer-dispersed liquid crystal (PDLC) films with a PDLC-PVA-PDLC structure were prepared in this work. It was found that all PDLC performance indexes were affected by polymer mesh size after comparing the microscopic morphology and electro-optical properties of samples with different monomer ratios. Gd2O3 nanoparticles and rhodamine B base fluorescent dyes introduced into the bilayer PDLC optimized the samples' electro-optical properties and developed new functionalities. In addition, the bilayer PDLC doped with Gd2O3 and rhodamine B base held excellent progressive driving functions as well as stable durability properties. Samples doped with Gd2O3 nanoparticles and rhodamine B base also produced excellent anti-counterfeiting effects under UV irradiation at different angles, further exploiting the application potential of PDLC.

Neutrophil hitchhiking nanoparticles enhance bacteria-mediated cancer therapy via NETosis reprogramming.

Bacteria have shown great potential in anti-tumor treatment, and an attenuated strain of Salmonella named VNP20009 has been shown to be safe in clinical trials. However, colonized bacteria recruit neutrophils into the tumor, which release NETs to capture and eliminate bacteria, compromising bacterial-based tumor treatment. In this study, we report a neutrophil hitchhiking nanoparticles (SPPS) that block the formation of NET to enhance bacteria-mediated tumor therapy. In the 4 T1 tumor-bearing mouse model, following 24 h of bacterial therapy, there was an approximately 3.0-fold increase in the number of neutrophils in the bloodstream, while the amount of SPPS homing to tumor tissue through neutrophil hitchhiking increased approximately 2.0-fold. It is worth noting that the NETs in tumors significantly decreased by approximately 2.0-fold through an intracellular ROS scavenging-mediated NETosis reprogramming, thereby increasing bacterial vitality by 1.9-fold in tumors. More importantly, the gene drug (siBcl-2) loaded in SPPS can be re-encapsulated in apoptotic bodies by reprogramming neutrophils from NETosis to apoptosis, and enable the redelivery of drugs to tumor cells, further boosting the antitumor efficacy with a synergistic effect, resulting in about 98% tumor inhibition rate and 90% survival rate.

Improve the Charge Carrier Transporting in Two-Dimensional Ruddlesden-Popper Perovskite Solar Cells.

Conventional 3D organic-inorganic halide perovskite materials have shown substantial potential in the field of optoelectronics, enabling the power conversation efficiency of solar cells beyond 26%. A key challenge limiting the further commercial application of 3D perovskite solar cells is their inherent instability over outer oxygen, humidity, light, and heat. By contrast, 2D Ruddlesden-Popper (2DRP) perovskites with bulky organic cations can effectively stabilize the inorganic slabs, yielding excellent environmental stability. However, the efficiencies of 2DRP perovskite solar cells are much lower than those of the 3D counterparts due to poor charge carrier transporting property of insulating bulky organic cations. Their inner structural, dielectric, optical, and excitonic properties remain to be primarily studied. In this review, the main reasons for the low efficiency of 2DRP perovskite solar cells are first analyzed. Next, a detailed description of various strategies for improving the charge carrier transporting of 2DRP perovskites is provided, such as bandgap regulation, perovskite crystal phase orientation and distribution, energy level matching, interfacial modification, etc. Finally, a summary is given, and the possible future research directions and methods to achieve high-efficiency and stable 2DRP perovskite solar cells are rationalized.

Multi-functional carbon nanotube encapsulated by covalent organic frameworks for lithium-sulfur chemistry and photothermal electrocatalysis.

It is significant to tailor multifunctional electrode materials for storing sustainable energy in lithium-sulfur (Li-S) batteries and converting intermittent solar energy into H2, facilitated by electricity. In this context, COF-1@CNT obtained through interfacial interaction fulfilled both requisites via post-functionalization. Upon integrating COF-1@CNT with S as the cathode for Li-S batteries, the system exhibited an initial discharge capacity of 1360 mAh g-1. Subsequently, it maintained a sustained actual capacity even after undergoing 200 charge-discharge cycles at 0.5C. The performance improvement was attributed to the optimized conductivity due to the addition of carbon nanotubes (CNTs). Furthermore, the synergistic interaction between the nitrogen of COF-1 and lithium mitigated the shuttle effect in Li-S batteries. In the modified three-electrode electrolytic cell system, COF-1@CNT-Ru produced by COF-1@CNT with RuCl3 showed better electrochemical reactivity for photothermal-assisted hydrogen evolution reaction (HER). This effect was demonstrated by reducing the overpotential to 140 mV relative to the no-photothermal condition (180 mV) at a current density of 10 mA cm-2. This study marked the first simultaneous application of covalent organic frameworks (COFs) based materials in Li-S batteries and photothermal-assisted electrocatalysts. The modified electrocatalytic system held promise as a novel avenue for exploring solar thermal energy utilization.

Promoting Ruddlesden-Popper Perovskite Formation by Tailoring Spacer Intramolecular Interaction for Efficient and Stable Solar Cells.

Low-dimensional Ruddlesden-Popper phase (LDRP) perovskites are widely studied in the field of photovoltaics due to their tunable energy-band properties, enhanced photostability, and improved environmental stability compared to the 3D perovskites. However, the insulating spacers with weak intramolecular interaction used in LDRP materials limit the out-of-plane charge transport, leading to poor device performance of LDRP perovskite solar cells (PSCs). Here, a functional ligand, 3-guanidinopropanoic acid (GPA), which is capable of forming strong intramolecular hydrogen bonds through the carboxylic acid group, is employed as an organic spacer for LDRP PSCs. Owing to the strong interaction between GPA molecules, high-quality LDRP (GPA)2 (MA)n-1 Pbn I3n+1 film with promoted formation of n = 5 phase, improved crystallinity, preferential vertical growth orientations, reduced trap-state density, and prolonged carrier lifetime is achieved using GPAI as the dimensionality regulator compared to butylamine hydroiodide (BAI). As a result, GPA-based LDRP PSC exhibits a champion power conversion efficiency of 18.16% that is much superior to the BA-based LDRP PSC (15.43%). Importantly, the optimized GPA-based LDRP PSCs without encapsulation show enhanced illumination, thermal, storage, and humidity stability compared to BA-based ones. This work provides new insights into producing high n value LDRP films and their efficient and stable PSCs.

Preparation of Progressive Driving Bilayer Polymer-Dispersed Liquid Crystals Possessing a PDLC-PVA-PDLC Structure.

In this paper, the bilayer polymer-dispersed liquid crystals possessing a PDLC-PVA-PDLC structure were prepared by integrating two monolayer PDLCs. The effect of the polymer mesh size on the electro-optical properties of a bilayer PDLC was investigated by comparing the micro-morphology and electro-optical curves under different polymerization conditions. In addition, the impact of doping MoO2 nanoparticles with surface modification on the comprehensive performance of the bilayer PDLC was further researched. The contrast ratio of the bilayer PDLC prepared under the optimal conditions was improved by more than 90% and still maintained excellent progressive driving performance. Therefore, the development of a bilayer PDLC with optimal electro-optical properties will significantly enhance the technological prospects for the application of PDLC-based devices in smart windows, displays, and flexible devices.

Timed Tissue P Systems With Channel States.

Tissue P systems with channel states are a variant of tissue P systems that can be employed as highly parallel computing devices, where the channel states can control the movements of objects. In a sense, the time-free approach can improve the robustness of P systems; hence, in this work, we introduce the time-free property into such P systems and explore their computational performances. Specifically, in a time-free manner, it is proved that this type of P systems have Turing universality by using two cells and four channel states with a maximum rule length of 2, or by using two cells and noncooperative symport rules with a maximum rule length of 1. Moreover, in terms of computational efficiency, it is proved that a uniform solution of the satisfiability ( SAT ) problem can be obtained in a time-free manner by applying noncooperative symport rules with a maximum rule length of 1. The research results of this paper show that a highly robust dynamic membrane computing system is constructed. Theoretically, relative to the existing system, our constructed system can enhance robustness and expand its application scope.

Stabilizing Anode-Electrolyte Interface for Dendrite-Free Zn-Ion Batteries Through Orientational Plating with Zinc Aspartate Additive.

The stability of aqueous Zn-ion batteries (AZIBs) is detrimentally influenced by the formation of Zn dendrites and the occurrence of parasitic side reactions at the Zn metal anode (ZMA)-electrolyte interface. The strategic manipulation of the preferential crystal orientation during Zn2+ plating serves as an essential approach to mitigate this issue. Here, Zn aspartate (Zn-Asp), an electrolyte additive for AZIBs, is introduced not only to optimize the solvation structure of Zn2+ , but also to crucially promote preferential Zn2+ plating on the (002) crystal plane of ZMA. As a result, both side reactions and Zn dendrites are effectively inhibited, ensuring an anode surface free of both dendrites and by-products. The implementation of Zn-Asp leads to significant enhancements in both Zn||Zn symmetric and Zn||Ti batteries, which demonstrate robust cyclability of over 3200 h and high Coulombic efficiency of 99.29%, respectively. Additionally, the Zn||NaV3 O8 ·1.5H2 O full battery exhibits remarkable rate capability, realizing a high capacity of 240.77 mA h g-1 at 5 A g-1 , and retains 92.7% of its initial capacity after 1000 cycles. This research underscores the vital role of electrolyte additives in regulating the preferential crystal orientation of ZMA, thereby contributing to the development of high-performing AZIBs.

One-dimensional H2V3O8 nanorods and two-dimensional lamellar MXene composites as efficient cathode materials for aqueous rechargeable zinc ion batteries.

The energy crisis is a the worldwide problem which needs humans to solve immediately. To solve this problem, it is necessary to develop energy storage batteries. It is worth mentioning the aqueous rechargeable zinc ion batteries (ARZBs) which have some advantages, such as low cost, good safety and no need for an organic electrolyte as in the traditional lithium-ion batteries. However, it is still a challenge to find suitable and reliable electrode materials. In this work, as-prepared H2V3O8 nanorods and MXene composites are used as cathode materials in ARZBs which were designed well using a hydrothermal method after optimizing the reaction time. The results showed that H2V3O8/MXene ARZBs could provide a good transport path for zinc ions, which were based on special 1D H2V3O8 nanorods and 2D multi-layered MXene materials, which exhibited an outstanding initial specific discharge capacity of 373 mA h g-1 at 200 mA g-1, good rate capability and a long lifecycle with only 15.8% capacity decay at 500 mA g-1 after 5000 cycles. The H2V3O8/MXene composites with a good electrochemical performance bring insight into their promising applications for energy storage batteries. They provided enhanced rate performance and excellent cycling stability, which was ascribed to the multi-step and multi-mode zinc ion insertion/extraction process. This was confirmed by the use of the 1D/2D integrated structure of the H2V3O8/MXene composites, which was conductive to zinc ion diffusion.

Research Progress on Intrinsically Conductive Polymers and Conductive Polymer-Based Composites for Electromagnetic Shielding.

Electromagnetic shielding materials are special materials that can effectively absorb and shield electromagnetic waves and protect electronic devices and electronic circuits from interference and damage by electromagnetic radiation. This paper presents the research progress of intrinsically conductive polymer materials and conductive polymer-based composites for electromagnetic shielding as well as an introduction to lightweight polymer composites with multicomponent systems. These materials have excellent electromagnetic interference shielding properties and have the advantages of electromagnetic wave absorption and higher electromagnetic shielding effectiveness compared with conventional electromagnetic shielding materials, but these materials still have their own shortcomings. Finally, the paper also discusses the future opportunities and challenges of intrinsically conductive polymers and composites containing a conductive polymer matrix for electromagnetic shielding applications.

Correction: Enhanced charge transport properties of an LFP/C/graphite composite as a cathode material for aqueous rechargeable lithium batteries.

[This corrects the article DOI: 10.1039/D3RA04143C.].

Enhanced charge transport properties of an LFP/C/graphite composite as a cathode material for aqueous rechargeable lithium batteries.

Electrodes that offer quick ion transport, a large surface area, and excellent electrical conductivity support high performance aqueous rechargeable lithium batteries. LiFePO4 (LFP) nanoparticles have been successfully coated with carbon by a chemical sol-gel route, and assembled on graphite by an ultrasonication method to acquire LFP/C/graphite. This LFP/C/graphite composite exhibits exceptional electrochemical performance at various current densities (1C to 20C). LFP/C/graphite delivers better capacity that is higher than that of LFP/C particles and high stability after 60 cycles at a current density of 1C for aqueous rechargeable lithium batteries as a cathode material. The graphite serves as a good volume buffer in improving the lithium performance of LFP/C/graphite during the charge/discharge process. The LFP/C/graphite composite shows high rate capability at 20C that returned to the initial capacity at 1C after 25 cycles with coulombic efficiency of 97%. Therefore, this effort presents a super low-cost route to fabricate high performance cathode materials in aqueous rechargeable lithium batteries and other energy storage appliances.

Spiking neural P systems with lateral inhibition.

As a member of the third generation of artificial neural network models, spiking neural P systems (SN P systems) have gained a hot research spot in recent years. This work introduces the phenomenon of lateral inhibition in biological nervous systems into SN P systems, and proposes SN P systems with lateral inhibition (LISN P systems). LISN P systems add the property of synaptic length to portray the lateral distance between neurons, and adopt a new form of rules, lateral interaction rules, to describe the reception of spikes by postsynaptic neurons with different lateral distances from the presynaptic neuron. Specifically, an excited neuron produces lateral inhibition on surrounding postsynaptic neurons. Postsynaptic neurons close to the excited neuron, i.e., neurons with small lateral distances, are more susceptible to lateral inhibition and either receive a fewer number of spikes generated by the excited neuron or fail to receive spikes. As the lateral distance increases, the lateral inhibition weakens, and the number of spikes received by postsynaptic neurons increases. Based on the above mechanism, four specific LISN P systems are designed for generating arbitrary odd numbers, arbitrary even numbers, arbitrary natural numbers and arithmetic series, respectively, as examples. By designing working modules, LISN P systems provide equivalence in computational power to the universal register machines in both generating and accepting modes. This verifies the computational completeness of LISN P systems. A universal LISN P system using merely 65 neurons is devised for function computation. According to comparisons among several systems, universal LISN P systems require fewer computational resources.

A bistable cholesteric liquid crystal film stabilized by a liquid-crystalline epoxy/thiol compound-based polymer.

Bistable cholesteric liquid crystals have promising application prospects in various fields, such as smart windows and displays. However, the long-term stability of two individual states is not easy to achieve, hindering their practical use. In this research, the bistable feature was enhanced by constructing a microsphere-type polymer with a liquid-crystalline epoxy/thiol monomer in negative dielectric anisotropic cholesteric liquid crystals. Spectroscopic and optical examinations revealed that either the transparent planar state or the opaque focal conic state can be maintained without the aid of an external field. Moreover, they can be switched to each other by applying a high- or low-frequency electric field. Further, factors such as the chemical structure of thiol compounds, curing temperature and curing time were investigated to explore their influences on the micro morphology of the polymer and thereby the electro-optical properties. In addition, the frequency-dependent driving scheme was analysed. Finally, bistable switching was demonstrated using an optimized sample. This energy-efficient bistable film shines light on future applications in smart windows, photonic paper and other electro-optical devices.

Metalation of functionalized benzoquinoline-linked COFs for electrocatalytic oxygen reduction and lithium-sulfur batteries.

It is worthwhile to explore and develop multifunctional composites with unique advantages for energy conversion and utilization. Post-synthetic modification (PSM) strategies can endow novel properties to already excellent covalent organic frameworks (COFs). In this study, we prepared a range of COF-based composites via a multi-step PSM strategy. COF-Ph-OH was acquired by demethylation between anhydrous BBr3 and - OMe, and then, M@COF-Ph-OH was further obtained by forming the N - M - O structure. COF-Ph-OH exhibited a 2e--dominated oxygen reduction reaction (ORR) pathway with high H2O2 selectivity, while M@COF-Ph-OH exhibited a 4e--dominated ORR pathway with low H2O2 selectivity, which was due to the introduction of a metal salt with a d electron structure that facilitated the acquisition of electrons and changed the adsorption energy of the reaction intermediate (*OOH). It was proven that the d electron structure was effective at regulating the reaction pathway of the electrocatalytic ORR. Moreover, Co@COF-Ph-OH showed better 4e- ORR properties than Fe@COF-Ph-OH and Ni@COF-Ph-OH. In addition, compared with the other sulfur-impregnated COF-based composites examined in this study, S-Co@COF-Ph-OH had a larger initial capacity, a weaker impedance, and a stronger cycling durability in Li-S batteries, which was attributed to the unique porous structure ensuring high sulfur utilization, the loaded cobalt accelerating LiPS electrostatic adsorption and promoting LiPS catalytic conversion, and the benzoquinoline ring structure being ultra-stable. This work offers not only a rational and feasible strategy for the synthesis of multifunctional COF-based composites, but also promotes their application in electrochemistry.