ABSTRACT
Metallothioneins (MTs) are non-enzymatic metal-binding proteins widely found in animals, plants, and microorganisms and are regulated by metal-responsive transcription factor 1 (MTF1). MT and MTF1 play crucial roles in detoxification, antioxidation, and anti-apoptosis. Therefore, they are key factors allowing organisms to endure the toxicity of heavy metal pollution. Phascolosoma esculenta is a marine invertebrate that inhabits intertidal zones and has a high tolerance to heavy metal stress. In this study, we cloned and identified MT and MTF1 genes from P. esculenta (designated as PeMT and PeMTF1). PeMT and PeMTF1 were widely expressed in all tissues and highly expressed in the intestine. When exposed to 16.8, 33.6, and 84 mg/L of zinc ions, the expression levels of PeMT and PeMTF1 in the intestine increased first and then decreased, peaking at 12 and 6 h, respectively, indicating that both PeMT and PeMTF1 rapidly responded to Zn stress. The recombinant pGEX-6p-1-MT protein enhanced the Zn tolerance of Escherichia coli and showed a dose-dependent ABTS free radical scavenging ability. After RNA interference (RNAi) with PeMT and 24 h of Zn stress, the oxidative stress indices (MDA content, SOD activity, and GSH content) and the apoptosis indices (Caspase 3, Caspase 8, and Caspase 9 activities) were significantly increased, implying that PeMT plays an important role in Zn detoxification, antioxidation, and anti-apoptosis. Moreover, the expression level of PeMT in the intestine was significantly decreased after RNAi with PeMTF1 and 24 h of Zn stress, which preliminarily proved that PeMTF1 has a regulatory effect on PeMT. Our data suggest that PeMT and PeMTF1 play important roles in the resistance of P. esculenta to Zn stress and are the key factors allowing P. esculenta to endure the toxicity of Zn.
Subject(s)
Metallothionein , Transcription Factors , Zinc , Metallothionein/genetics , Metallothionein/metabolism , Animals , Zinc/metabolism , Transcription Factors/metabolism , Transcription Factors/genetics , Stress, Physiological/drug effects , Stress, Physiological/genetics , Transcription Factor MTF-1 , DNA-Binding Proteins/genetics , DNA-Binding Proteins/metabolism , Apoptosis/drug effects , Phylogeny , Amino Acid Sequence , Gene Expression Regulation/drug effects , Cloning, MolecularABSTRACT
Angiogenesis is vital for bone fracture healing and plays a significant role in the fate of orthopedic implants. The growth and maintenance of new blood vessels at the fracture site of patients is essential, which promotes the clinical outcome of plasma sprayed Ti (PST) coated orthopedic implants. In order to endow the PST coating with pro-angiogenic effects, deferoxamine-loaded chitosan-based hydrogel was fabricated on the coating surface. Polydopamine-modified chitosan (CS/PDA) hydrogel exhibited enhanced bonding strength to PST coatings as evidenced by scratch test. The deferoxamine-loaded CS/PDA (CS/PDA-DFO) exhibited a sustained drug-release property, and the cumulative concentration of released DFO reached 20.21 µg/mL on day 7. PST-CS/PDA with higher wettability and active group quantity enhanced the viability and adhesion characteristics of human umbilical vein endothelial cells (HUVECs) and upregulated the secretion level of nitric oxide and vascular endothelial growth factor. Moreover, the introduction of DFO in PST-CS/PDA further enhanced the pro-angiogenic effects. Above all, this study offers a novel approach for developing hydrogel coating on orthopedic implants showing enhanced bonding strength and pro-angiogenic effects.
ABSTRACT
BACKGROUND: Neoadjuvant therapy followed by surgery has become the standard of care for locally advanced esophageal squamous cell carcinoma (ESCC) and accurate pathological response assessment is critical to assess the therapeutic efficacy. However, it can be laborious and inconsistency between different observers may occur. Hence, we aim to develop an interpretable deep-learning model for efficient pathological response assessment following neoadjuvant therapy in ESCC. METHODS: This retrospective study analyzed 337 ESCC resection specimens from 2020-2021 at the Pudong-Branch (Cohort 1) and 114 from 2021-2022 at the Puxi-Branch (External Cohort 2) of Fudan University Shanghai Cancer Center. Whole slide images (WSIs) from these two cohorts were generated using different scanning machines to test the ability of the model in handling color variations. Four pathologists independently assessed the pathological response. The senior pathologists annotated tumor beds and residual tumor percentages on WSIs to determine consensus labels. Furthermore, 1850 image patches were randomly extracted from Cohort 1 WSIs and binarily classified for tumor viability. A deep-learning model employing knowledge distillation was developed to automatically classify positive patches for each WSI and estimate the viable residual tumor percentages. Spatial heatmaps were output for model explanations and visualizations. RESULTS: The approach achieved high concordance with pathologist consensus, with an R^2 of 0.8437, a RAcc_0.1 of 0.7586, a RAcc_0.3 of 0.9885, which were comparable to two senior pathologists (R^2 of 0.9202/0.9619, RAcc_0.1 of 8506/0.9425, RAcc_0.3 of 1.000/1.000) and surpassing two junior pathologists (R^2 of 0.5592/0.5474, RAcc_0.1 of 0.5287/0.5287, RAcc_0.3 of 0.9080/0.9310). Visualizations enabled the localization of residual viable tumor to augment microscopic assessment. CONCLUSION: This work illustrates deep learning's potential for assisting pathological response assessment. Spatial heatmaps and patch examples provide intuitive explanations of model predictions, engendering clinical trust and adoption (Code and data will be available at https://github.com/WinnieLaugh/ESCC_Percentage once the paper has been conditionally accepted). Integrating interpretable computational pathology could help enhance the efficiency and consistency of tumor response assessment and empower precise oncology treatment decisions.
ABSTRACT
Background: Radiomics and artificial intelligence approaches have been developed to predict chronic obstructive pulmonary disease (COPD), but it is still unclear which approach has the best performance. Therefore, we established five prediction models that employed deep-learning (DL) and radiomics-based machine-learning (ML) approaches to identify COPD on low-dose computed tomography (LDCT) images and compared the relative performance of the different models to find the best model for identifying COPD. Methods: This retrospective analysis included 1,024 subjects (169 COPD patients and 855 control subjects) who underwent LDCT scans from August 2018 to July 2021. Five prediction models, including models that employed computed tomography (CT)-based radiomics features, chest CT images, quantitative lung density parameters, and demographic and clinical characteristics, were established to identify COPD by DL or ML approaches. Model 1 used CT-based radiomics features by ML method. Model 2 used a combination of CT-based radiomics features, lung density parameters, and demographic and clinical characteristics by ML method. Model 3 used CT images only by DL method. Model 4 used a combination of CT images, lung density parameters, and demographic and clinical characteristics by DL method. Model 5 used a combination of CT images, CT-based radiomics features, lung density parameters, and demographic and clinical characteristics by DL method. The accuracy, sensitivity, specificity, highest negative predictive values (NPVs), positive predictive values, and areas under the receiver operating characteristic (AUC) curve of the five prediction models were compared to examine their performance. The DeLong test was used to compare the AUCs of the different models. Results: In total, 107 radiomics features were extracted from each subject's CT images, 17 lung density parameters were acquired by quantitative measurement, and 18 selected demographic and clinical characteristics were recorded in this study. Model 2 had the highest AUC [0.73, 95% confidence interval (CI): 0.64-0.82], while model 3 had the lowest AUC (0.65, 95% CI: 0.55-0.75) in the test set. Model 2 also had the highest sensitivity (0.84), the highest accuracy (0.81), and the highest NPV (0.36). In the test set, based on the AUC results, Model 2 significantly outperformed Model 1 (P=0.03). Conclusions: The results showed that the identification ability of models that employ CT-based radiomics features combined with lung density parameters, and demographic and clinical characteristics using ML methods performed better than the chest CT image-based DL methods. ML methods are more suitable and beneficial for COPD identification.
ABSTRACT
Dynamical control of macrophage polarization from M1 (pro-inflammatory) to M2 (anti-inflammatory) at implant surfaces is essential for balancing innate immunity and tissue repair. In this aspect, the design of orthopedic implant that can response to inflammation microenvironment with transformation in surface properties has shown promising in timely driving M1-to-M2 macrophage transition. Considering excessive reactive oxygen species (ROS) contribute to macrophage M1 polarization and progression of inflammation, in this study, ferrocene modified polydopamine (PDA-Fc) films were deposited on plasma sprayed Ti coatings to endow the implants with ROS-responsive and -scavenging abilities. Plasma sprayed Ti (PST) coating and PDA modified PST coating (PST/PDA) served as control. The presence of PDA endowed PST/PDA and PST/PDA-Fc with free-radical scavenging abilities. Moreover, PST/PDA-Fc showed adaptive wettability as evidenced by increased hydrophilicity under H2O2 treatment. With respect to PST/PDA, PST/PDA-Fc exerted greater effects on inducing lipopolysaccharides-induced M1 macrophages to adopt M2-type macrophage phenotype, characterized by higher percentage of CD206-positive cells, increased cell elongation rate and higher expression level of anti-inflammatory cytokine arginase type 1. The results obtained in our study may provide a prospective approach for manipulating an appropriate immune response at implant surfaces.
Subject(s)
Ferrous Compounds , Hydrogen Peroxide , Indoles , Macrophages , Polymers , Humans , Wettability , Metallocenes , Reactive Oxygen Species/metabolism , Hydrogen Peroxide/pharmacology , Inflammation/metabolism , Anti-Inflammatory Agents/pharmacologyABSTRACT
Integrin-mediated osteoblast adhesion to adsorbed extracellular ligands on orthopedic implants is crucial for the subsequent osteoblast behaviors and ultimate osseointegration. Considerable research efforts have focused on the development of implant surfaces that promote the adsorption of extracellular ligands, but ignored the fact that integrin binding to ligands requires divalent cations (such as Mn2+). Here, three kinds of Mn-doped nanowire-structured TiO2 coatings with 1.9, 3.9, and 8.8 wt% dopant contents (Mn1-, Mn2-, and Mn3-TiO2) were synthesized on Ti implants to enhance integrin-mediated osteoblastic responses. The Mg-doped and undoped TiO2 nanocoatings served as the control. Mn element was not only successfully incorporated into the TiO2 matrix, but also formed an oxygen-deficient Mn oxide on the nanowire surface. Although the adsorbed fibronectin (Fn) amount on Mn-doped nanocoatings and its unfolded status were slightly attenuated with increasing Mn amount, the interaction between the coating extract and Fn demonstrated a Mn2+-induced unfolding of Fn with the exposure of the RGD motif. Compared to the Mn1-, Mn2- and Mg-doped TiO2 nanocoatings, the Mn3-TiO2 nanocoating significantly upregulated the expression of integrin α5ß1 probably through increasing the ligand-binding affinity of the integrin rather than integrin binding sites in Fn. Consistent with the activation trend of integrin α5ß1, the Mn3-TiO2 nanocoating enhanced cell adhesion with the long stretched structure of actin fibers and extensive formation of vinculin focal adhesion spots and upregulated the levels of alkaline phosphatase and osteocalcin activities. Therefore, Mn supplementation of orthopedic implants may be a promising way to improve osteogenesis at the implant surface.
Subject(s)
Integrin alpha5beta1 , Integrins , Manganese , Cell Adhesion , Titanium/pharmacology , Titanium/chemistry , Dietary Supplements , Fibronectins/metabolismABSTRACT
Learning efficient graph representation is the key to favorably addressing downstream tasks on graphs, such as node or graph property prediction. Given the non-Euclidean structural property of graphs, preserving the original graph data's similarity relationship in the embedded space needs specific tools and a similarity metric. This paper develops a new graph representation learning scheme, namely Egg, which embeds approximated second-order graph characteristics into a Grassmann manifold. The proposed strategy leverages graph convolutions to learn hidden representations of the corresponding subspace of the graph, which is then mapped to a Grassmann point of a low dimensional manifold through truncated singular value decomposition (SVD). The established graph embedding approximates denoised correlationship of node attributes, as implemented in the form of a symmetric matrix space for Euclidean calculation. The effectiveness of Egg is demonstrated using both clustering and classification tasks at the node level and graph level. It outperforms baseline models on various benchmarks.
Subject(s)
Algorithms , Learning , Cluster AnalysisABSTRACT
Restoration of nerve supply in newly formed bone is critical for bone defect repair. However, nerve regeneration is often overlooked when designing bone repair biomaterials. In this study, employing graphitic carbon nitride (g-C3N4) as a visible-light-driven photocatalyst and reduced graphene oxide (rGO) as a conductive interface, an rGO/g-C3N4/TiO2 (rGO/CN/TO) ternary nanocoating with photoelectric conversion ability was fabricated on a Ti-based orthopedic implant for photoelectric stimulation of both bone and nerve repair. Compared with g-C3N4/TiO2 (CN/TO) and TiO2 nanocoatings, the ternary nanocoating exhibited stronger visible-light absorption as well as higher transient photocurrent density and open circuit potential under blue LED exposure. The improved photo-electrochemical properties of the ternary nanocoating were attributed to the enhanced separation of photogenerated carriers at the heterointerface. For the tested nanocoatings, introducing blue LED light irradiation enhanced MC3T3-E1 osteoblastic differentiation and neurite outgrowth of PC12 cells. Among them, the rGO/CN/TO nanocoating exerted the greatest enhancement. In a coculture system, PC12 cells on the ternary nanocoating released a higher amount of neurotransmitter calcitonin gene-related peptide (CGRP) under light irradiation, which in turn significantly enhanced osteoblastic differentiation. The results may provide a prospective approach for targeting nerve regeneration to stimulate osteogenesis when designing bone repair biomaterials.
ABSTRACT
Physical features on the biomaterial surface are known to affect macrophage cell shape and phenotype, providing opportunities for the design of novel "immune-instructive" topographies to modulate foreign body response. The work presented here employed nanopatterned polydimethylsiloxane substrates with well-characterized nanopillars and nanopits to assess RAW264.7 macrophage response to feature size. Macrophages responded to the small nanopillars (SNPLs) substrates (450 nm in diameter with average 300 nm edge-edge spacing), resulting in larger and well-spread cell morphology. Increasing interpillar distance to 800 nm in the large nanopillars (LNPLs) led to macrophages exhibiting morphologies similar to being cultured on the flat control. Macrophages responded to the nanopits (NPTs with 150 nm deep and average 800 nm edge-edge spacing) by a significant increase in cell elongation. Elongation and well-spread cell shape led to expression of anti-inflammatory/pro-healing (M2) phenotypic markers and downregulated expression of inflammatory cytokines. SNPLs and NPTs with high availability of integrin binding region of fibronectin facilitated integrin ß1 expression and thus stored focal adhesion formation. Increased integrin ß1 expression in macrophages on the SNPLs and NTPs was required for activation of the PI3K/Akt pathway, which promoted macrophage cell spreading and negatively regulated NF-κB activation as evidenced by similar globular cell shape and higher level of NF-κB expression after PI3K blockade. These observations suggested that alterations in macrophage cell shape from surface nanotopographies may provide vital cues to orchestrate macrophage phenotype.
ABSTRACT
Therapeutic application in prevention and treatment of bone diseases, particularly osteoporosis, has recently started to emerge for manganese dioxide (MnO2) nanoparticles and nanocoatings whereby their antioxidant catalase-mimetic property can be exploited to control oxidative stress by reducing the amount of H2O2. Doping is an efficient method to enhance the catalase-mimetic activity of MnO2, which can potentially ameliorate osteogenesis under oxidative stress. Herein, Zn2+ doped MnO2 (Zn-MnO2) nanocoating was fabricated on orthopedic titanium implant by a facile UV-photolysis reaction. The Zn-MnO2 nanocoating showed better cytocompatibility than the MnO2 nanocoating, as indicated by enhanced cell proliferation, differentiation and mineralization of MC3T3-E1 pre-osteoblasts. This was probably due to the increased surface hydrophilicity as well as the combination effect of released Zn2+ and Mn2+ from the Zn-MnO2 nanocoating. Importantly, the Zn-MnO2 nanocoating with enhanced catalase-like activity exerted greater effects to suppress the intracellular oxidation products generation and prevent the depletion of dismutase superoxide levels under H2O2-induced oxidative stress, which in turn protected MC3T3-E1 pre-osteoblast functions. Overall, surface modification of titanium implants with the Zn-MnO2 nanocoating could be utilized to ameliorate oxidative stress-inhibited osteogenesis.
Subject(s)
Antioxidants , Hydrogen Peroxide , Biocompatible Materials , Catalase , Manganese Compounds , Nanostructures , Osteoblasts , Oxidative Stress , Oxides/pharmacology , ZincABSTRACT
The C-terminal kinesin motor protein (KIFC1) has essential functions in spermatogenesis. To evaluate molecular mechanisms of KIFC1 during teleost fish spermatogenesis, there was cloning and sequencing the kifc1 cDNA in the testis of Larimichthys polyactis. Quantitative PCR results indicated there were Lp-kifc1 mRNA transcripts in the testes. Results from conducting fluorescence in situ hybridization and immunofluorescence procedures indicated there were trends in relative abundance changes in Lp-kifc1 mRNA transcripts that were associated with abundance of Lp-KIFC1 protein during spermatogenesis. The Lp-KIFC1 protein was detected at all stages of spermatogenesis. There was minimal Lp-KIFC1 in the cytoplasm of spermatogonia, with content being greater and concentrated in the perinuclear region in spermatocytes and during early/mid-stages of development of spermatids. There were large abundances of Lp-KIFC1 in spermatids at the mid-developmental stage. In late-developing spermatids, Lp-KIFC1 content was less and concentrated in the bottom of the nucleus, where the midpiece formed. There was a small Lp-KIFC1 in the midpiece of mature sperm. These findings indicate Lp-KIFC1 may have functions in L. polyactis spermatogenesis. Results from conducting immunofluorescence procedures indicated Lp-KIFC1 was co-localized microtubules and mitochondria throughout spermatogenesis. There were large abundances of Lp-KIFC1 and tubulin in spermatids during the mid-developmental stage, when there is a decrease in size and reshaping of the nucleus. During midpiece formation, there was co-localization of the Lp-KIFC1 and mitochondria in the spermatid perinuclear region to the midpiece. These findings indicate Lp-KIFC1 is involved in nuclear reshaping and midpiece formation during spermatogenesis in L. polyactis.
Subject(s)
Fishes/physiology , Kinesins/metabolism , Spermatogenesis/physiology , Spermatozoa/cytology , Spermatozoa/physiology , Testis/physiology , Amino Acid Sequence , Animals , Cell Nucleus/physiology , Cloning, Molecular , DNA, Complementary/genetics , Fishes/genetics , Gene Expression Regulation/physiology , Kinesins/genetics , Male , Microtubules/physiology , Mitochondria/physiology , Phylogeny , Protein Conformation , Protein Transport , RNA, Messenger/genetics , RNA, Messenger/metabolism , Tubulin/genetics , Tubulin/metabolismABSTRACT
In this study, we developed an optimal cryopreservation procedure for Varicorhinus barbatulus sperm. To this end, we optimized (1) the types and dilution ratios of extenders; (2) types and final concentration of cryoprotectants; and (3) freezing conditions, including equilibration time, height above the surface of liquid nitrogen (LN), and the cooling times in the two-step cooling method. The optimum result was obtained when the sperm was diluted at a 1:9 ratio in D-17 with 10% methanol, equilibrated at 4 °C for 10 min, held at 7 cm above LN for 2 min, and finally stored in LN. After storage for 12 h in LN, the sperm was thawed in a water bath at 40 °C for 6s, the post-thaw sperm motility was 66.10 ± 7.12%, while the corresponding rate for fresh sperm was 87.08 ± 2.38%. Using computer-assisted sperm analysis, we found a significant decrease in the motility parameters of post-thaw sperm, especially the parameters related to velocity. To evaluate the effects of cryopreservation on the structural integrity of sperm, transmission electron microscopy and scanning electron microscopy were employed, which showed the defects in frozen sperm, including: abnormal heads, damaged plasma membranes, broken tails, and the disappearance of the mitochondrial internal crest. In addition, we determined the mitochondrial membrane potential to assess the functional integrity of frozen sperm. Our results showed a decrease in the mitochondrial function of frozen sperm. This procedure could be used alongside cryopreservation of V. barbatulus and supports its commercial-scale production and species conservation.
Subject(s)
Semen Preservation , Cryopreservation/methods , Cryoprotective Agents/pharmacology , Humans , Male , Semen Preservation/veterinary , Sperm Motility , SpermatozoaABSTRACT
The elimination of the spermatid cytoplasm during spermiogenesis enables the sperm to acquire a streamlined architecture, which allows for unhindered swimming. While this process has been well described in vertebrates, it has rarely been reported in invertebrates. In this study, we observed the process of cytoplasm elimination during spermiogenesis in Octopus tankahkeei (Mollusca, Cephalopoda) using light microscopy, transmission electron microscopy, and immunofluorescence. In the early spermatid, the cell is circular, and the nucleus is centrally located. With spermatid development, the cell becomes polarized. The nucleus gradually elongates and moves toward the end of the cell where the tail is forming. As a result, the cytoplasm moves past the nucleus at the anterior region of the future sperm head (the foreside of the acrosome). Following this, during the late stage of spermiogenesis, the cytoplasm condenses and collects on the foreside of the acrosome until finally the residual body is discarded from the top of the sperm head. This represents a distinct directionality for the development of cytoplasmic polarity and discarding of residual body compared with that reported for vertebrates (in which the cytoplasm of the elongating spermatids is polarized toward the caudal region). The fact that the cytoplasm also becomes concentrated suggests that water pumps may be involved in the elimination of water from the cytoplasm before the residual body is discarded. Furthermore, we found that microtubules, forming a manchette-like structure, are involved not only in reshaping of the nucleus but also in the transport of mitochondria and vesicles to the foreside of the acrosome, subsequently allowing them to be discarded with the residual body. This study broadens our understanding of the development of polarization and elimination of cytoplasm from spermatids in animals.
Subject(s)
Cytoplasm/metabolism , Octopodiformes/physiology , Spermatids/growth & development , Spermatogenesis , Animals , Cell Nucleus/metabolism , Cell Nucleus/ultrastructure , Male , Microtubules/metabolism , Microtubules/ultrastructure , Octopodiformes/ultrastructure , Seminiferous Tubules/cytology , Spermatids/cytology , Spermatids/ultrastructure , Spermatozoa/cytology , Spermatozoa/ultrastructure , Testis/cytologyABSTRACT
Orthopedic implant coatings with optimal surface features to achieve favorable osteo/angio-genesis and inflammatory response would be of great importance. However, to date, few coatings are capable of fully satisfying these requirements. In this work, to take advantage of the structural complexity of micro/nano-topography and benefits of biological trace elements, two types of boron-containing nanostructures (nanoflakes and nanolamellars) were introduced onto plasma-sprayed calcium silicate (F-BCS and L-BCS) coatings via hydrothermal treatment. The C-CS coating using deionized water as hydrothermal medium served as control. Boron-incorporated CS coating stimulated osteoblastic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs). Specifically, the combination of ß1 integrin-vinculin-mediated cell spreading and activation of bone morphogenetic protein signaling pathway acted synergistically to cause significant upregulation of runt-related transcription factor 2 (RUNX2) protein and Runx2 gene expression in BMSCs on the F-BCS coating surface, which induced the transcription of downstream osteogenic differentiation marker genes. F-BCS coating allowed specific boron ion release, which favored angiogenesis as evidenced by the enhanced migration and tube formation of human umbilical vein endothelial cells in the coating extract. Boron-incorporated coatings significantly suppressed the expression of toll-like receptor adaptor genes in RAW264.7 macrophages and subsequently the degradation of nuclear factor-κB inhibitor α, accompanied by the inactivation of the downstream pro-inflammatory genes. In vivo experiments confirmed that F-BCS-coated Ti implant possessed enhanced osseointegration compared with L-BCS- and C-CS-coated implants. These data highlighted the synergistic effect of specific nanotopography and boron release from orthopedic implant coating on improvement of osseointegration.
Subject(s)
Osseointegration , Osteogenesis , Boron/pharmacology , Calcium Compounds , Coated Materials, Biocompatible/pharmacology , Endothelial Cells , Humans , Silicates , Surface Properties , TitaniumABSTRACT
Affected by environmental factors such as oxygen deficiency, the secretion of growth factor was abnormal in bone injury sites, resulting in the poor responses of osteoblasts and prolonging the healing process. Herein, in this study, we reported an in situ oxygen-releasing porous titanium coating that combines the dual degradability of poly(lactic-co-glycolic acid) with the self-releasing oxygen capacity of the CaO2 core. The resulting formulation exhibited stable oxygen-releasing capacity as well as the ability to promote proliferation and differentiation of the MC3T3 cell line under hypoxia conditions. According to these results, oxygen-releasing coatings based on improved cellular microenvironment may be a promising bone repair material that would reduce the incidence of difficult bone healing in the future.
Subject(s)
Coated Materials, Biocompatible/chemistry , Hypoxia/metabolism , Oxygen/chemistry , 3T3 Cells , Alkaline Phosphatase/metabolism , Animals , Bone Regeneration , Cell Adhesion/drug effects , Cell Differentiation , Cellular Microenvironment , Fracture Healing , Mice , Nanoparticles , Peroxides/chemistry , Porosity , TitaniumABSTRACT
Mitochondria play an important role in spermatogenesis, and some mitochondrial proteins are specifically related to this process. In this study we investigated the cytological characteristics of spermatogenic cells, including mitochondrial dynamics, during spermatogenesis in Pampus argenteus. In addition, we characterised the mitochondria-related protein prohibitin (PHB), which has been reported to play roles in mitochondrial dynamics and animal fertility. The full-length cDNA of the P. argenteus phb gene (Pa-phb) is 1687bp, including a 102-bp 5'-untranslated region (UTR), a 772-bp 3'-UTR and an 813-bp open reading frame encoding 271 amino acids. The predicted P. argenteus PHB protein (Pa-PHB) contains three functional domains (a transmembrane domain, an SPFH domain (the conserved region of stomatins, prohibitins, flotillins and HflK/C) and a coiled-coil domain) and exhibits high similarity with its homologue in other animals. The Pa-phb gene was widely expressed in all tissues examined, especially the liver and heart. We primarily focused on Pa-phb expression during spermatogenesis after observing the cytological features of male germ cells, and found that Pa-phb transcripts were detected throughout the course of development of male germ cells. Notably, we observed colocalised signals of Pa-PHB and mitochondria, which were distributed in the cytoplasm around the nucleus in spermatogonia, spermatocytes and early spermatids, tended to move to one side of the cell in middle spermatids and, finally, were colocalised in the sperm midpiece. These observations indicate that Pa-PHB is primarily localised in mitochondria during spermatogenesis, indicating that it has a role in mitochondria. Based on the results of this and previous studies regarding the essential roles of PHB in mitochondria and spermatogenesis in animals, we propose a functional model for PHB during spermatogenesis, including possible roles in the proliferation of spermatogonia and in the regulation of mitochondrial morphology and function in spermatogenic cells.
Subject(s)
Fishes/metabolism , Gene Expression , Mitochondria/metabolism , Repressor Proteins/metabolism , Spermatogenesis/physiology , Testis/metabolism , Animals , Fishes/genetics , Male , Prohibitins , Repressor Proteins/genetics , Spermatogonia/metabolismABSTRACT
The success of orthopedic implants requires rapid and complete osseointegration which relies on an implant surface with optimal features. To enhance cellular function in response to the implant surface, micro- and nanoscale topography have been suggested as essential. The aim of this study was to identify an optimized Ti nanostructure and to introduce it onto a titanium plasma-sprayed titanium implant (denoted NTPS-Ti) to confer enhanced immunomodulatory properties for optimal osseointegration. To this end, three types of titania nanostructures, namely, nanowires, nanonests, and nanoflakes, were achieved on hydrothermally prepared Ti substrates. The nanowire surface modulated protein conformation and directed integrin binding and specificity in such a way as to augment the osteogenic differentiation of bone marrow-derived mesenchymal stem cells (BMSCs) and induce a desirable osteoimmune response of RAW264.7 macrophages. In a coculture system, BMSCs on the optimized micro/nanosurface exerted enhanced effects on nonactivated or lipopolysaccharide-stimulated macrophages, causing them to adopt a less inflammatory macrophage profile. The enhanced immunomodulatory properties of BMSCs grown on NTPS-Ti depended on a ROCK-medicated cyclooxygenase-2 (COX2) pathway to increase prostaglandin E2 (PGE2) production, as evidenced by decreased production of PGE2 and concurrent inhibition of immunomodulatory properties after treatment with ROCK or COX2 inhibitors. In vivo evaluation showed that the NTPS-Ti implant resulted in enhanced osseointegration compared with the TPS-Ti and Ti implants. The results obtained in our study may provide a prospective approach for enhancing osseointegration and supporting the application of micro/nanostructured Ti implants.
Subject(s)
Nanostructures , Osseointegration , Osteogenesis , Titanium , Surface PropertiesABSTRACT
KIF3A and KIF3B are homologous motor subunits of the Kinesin II protein family. KIF3A, KIF3B, and KAP3 form a heterotrimeric complex and play a significant role in spermatogenesis. Here, we first cloned full-length kif3a/3b cDNAs from Larimichthys polyactis. Lp-kif3a/3b are highly related to their homologs in other animals. The proteins are composed of three domains, an N-terminal head domain, a central stalk domain, and a C-terminus tail domain. Lp-kif3a/3b mRNAs were found to be ubiquitously expressed in the examined tissues, with high expression in the testis. Fluorescence in situ hybridization (FISH) was used to analyze the expression of Lp-kif3a/3b mRNAs during spermiogenesis. The results showed that Lp-kif3a/3b mRNAs had similar expression pattern and were continuously expressed during spermiogenesis. From middle spermatid to mature sperm, Lp-kif3a/3b mRNAs gradually localized to the side of the spermatid where the midpiece and tail form. In addition, we used immunofluorescence (IF) to observe that Lp-KIF3A protein co-localizes with tubulin during spermiogenesis. In early spermatid, Lp-KIF3A protein and microtubule signals were randomly distributed in the cytoplasm. In middle spermatid, however, the protein was detected primarily around the nucleus. In late spermatid, the protein migrated primarily to one side of the nucleus where the tail forms. In mature sperm, Lp-KIF3A and microtubules accumulated in the midpiece. Moreover, Lp-KIF3A co-localized with the mitochondria. In mature sperm, Lp-KIF3A and mitochondria were present in the midpiece. Therefore, Lp-KIF3A/KIF3B may be involved in spermiogenesis in L. polyactis, particularly during nuclear reshaping and tail formation.
Subject(s)
Fish Proteins/metabolism , Fishes/physiology , Kinesins/metabolism , Spermatogenesis , Spermatozoa/cytology , Amino Acid Sequence , Animals , Base Sequence , Cell Nucleus/metabolism , Cloning, Molecular , Fish Proteins/chemistry , Fish Proteins/genetics , Humans , Kinesins/chemistry , Kinesins/genetics , Male , Phylogeny , Sequence Alignment , Spermatozoa/metabolismABSTRACT
The clinical treatment of bone tumors usually brings about residual tumor cells and large bone defects after tumor removal surgery. To solve this problem, it is imperative to develop a novel implant with bi-functions for eliminating the residual tumor cells and repairing bone defects. In this study, hydrogenated black TiO2 (H-TiO2) coating with hierarchical micro/nano-topographies is fabricated by induction suspension plasma spraying (ISPS). The fabricated H-TiO2 coating possessed excellent and controllable photothermal effect in inhibiting the tumor growth under 808â¯nm NIR laser irradiation in vitro and in vivo. The hierarchical hybrid micro/nano-structured surface and Ti-OH groups improved the adhesion, proliferation, differentiation and osteogenic gene expressions of rat bone mesenchymal stem cells (rBMSCs). These results demonstrate that the H-TiO2 coating may be a promising implant material for the treatment of bone tumors and bone regeneration.
Subject(s)
Bone Neoplasms/therapy , Bone Regeneration/drug effects , Coated Materials, Biocompatible/pharmacology , Hyperthermia, Induced , Phototherapy , Titanium/pharmacology , Animals , Bone Neoplasms/pathology , Cell Adhesion/drug effects , Cell Differentiation/drug effects , Cell Line, Tumor , Cell Proliferation/drug effects , Cell Survival/drug effects , Humans , Hydrogenation , Mesenchymal Stem Cells/cytology , Mesenchymal Stem Cells/drug effects , Mesenchymal Stem Cells/ultrastructure , Mice, Inbred BALB C , Mice, Nude , Osteogenesis/drug effects , Photoelectron Spectroscopy , RatsABSTRACT
Early vascularization is crucial for osteogenic repair of bone defects and plays an essential role in the fate of implanted biomaterials. Thus, there is a growing interest in the use of biomaterials to release inorganic ions that are capable of stimulating angiogenesis. Since it has been established that boron (B) may play roles in angiogenesis, the aim of our study was to investigate the in vitro angiogenic effects of the ionic dissolution products from the B-incorporated calcium silicate (Ca11Si4B2O22, B-CS) coating. The results showed that ionic products of B-CS coating extract obviously stimulated the proliferation and migration of human umbilical vein endothelial cells (HUVECs) as well as the in vitro tubule formation when compared with those of CS coating extract. In addition, the gene expression levels of pro-angiogenic growth factors (VEGF, bFGF, ANG1) and receptors (VEGFR-2, bFGFR) were significantly upregulated when stimulated with the B-CS coating extract. Moreover, VEGF and VEGFR-2 protein synthesis, eNOS, and Akt phosphorylation, as well as NO synthesized by HUVECs were increased by the B-CS coating extract. Hence, the B-CS coating offers a potential solution to enhance bone vascularization essential for successful osseointegration of orthopedic implants.