Polymer hetero-electrolyte enabled solid-state 2.4-V Zn/Li hybrid batteries.

The high redox potential of Zn0/2+ leads to low voltage of Zn batteries and therefore low energy density, plaguing deployment of Zn batteries in many energy-demanding applications. Though employing high-voltage cathode like spinel LiNi0.5Mn1.5O4 can increase the voltages of Zn batteries, Zn2+ ions will be immobilized in LiNi0.5Mn1.5O4 once intercalated, resulting in irreversibility. Here, we design a polymer hetero-electrolyte consisting of an anode layer with Zn2+ ions as charge carriers and a cathode layer that blocks the Zn2+ ion shuttle, which allows separated Zn and Li reversibility. As such, the Zn‖LNMO cell exhibits up to 2.4 V discharge voltage and 450 stable cycles with high reversible capacity, which are also attained in a scale-up pouch cell. The pouch cell shows a low self-discharge after resting for 28 days. The designed electrolyte paves the way to develop high-voltage Zn batteries based on reversible lithiated cathodes.

Starch-mediated colloidal chemistry for highly reversible zinc-based polyiodide redox flow batteries.

Aqueous Zn-I flow batteries utilizing low-cost porous membranes are promising candidates for high-power-density large-scale energy storage. However, capacity loss and low Coulombic efficiency resulting from polyiodide cross-over hinder the grid-level battery performance. Here, we develop colloidal chemistry for iodine-starch catholytes, endowing enlarged-sized active materials by strong chemisorption-induced colloidal aggregation. The size-sieving effect effectively suppresses polyiodide cross-over, enabling the utilization of porous membranes with high ionic conductivity. The developed flow battery achieves a high-power density of 42 mW cm-2 at 37.5 mA cm-2 with a Coulombic efficiency of over 98% and prolonged cycling for 200 cycles at 32.4 Ah L-1posolyte (50% state of charge), even at 50 °C. Furthermore, the scaled-up flow battery module integrating with photovoltaic packs demonstrates practical renewable energy storage capabilities. Cost analysis reveals a 14.3 times reduction in the installed cost due to the applicability of cheap porous membranes, indicating its potential competitiveness for grid energy storage.

Regulating Protons to Tailor the Enol Conversion of Quinone for High-Performance Aqueous Zinc Batteries.

Quinone-based electrodes using carbonyl redox reactions are promising candidates for aqueous energy storage due to their high theoretical specific capacity and high-rate performance. However, the proton storage manners and their influences on the electrochemical performance of quinone are still not clear. Herein, we reveal that proton storage could determine the products of the enol conversion and the electrochemical stability of the organic electrode. Specifically, the protons preferentially coordinated with the prototypical pyrene-4,5,9,10-tetraone (PTO) cathode, and increasing the proton concentration in the electrolyte can improve its working potentials and cycling stability by tailoring the enol conversion reaction. We also found that exploiting Al2(SO4)3 as a pH buffer can increase the energy density of the Zn||PTO batteries from 242.8 to 284.6 Wh kg-1. Our research has a guiding significance for emphasizing proton storage of organic electrodes based on enol conversion reactions and improving their electrochemical performance.

Inhibiting Residual Solvent Induced Side Reactions in Vinylidene Fluoride-Based Polymer Electrolytes Enables Ultra-Stable Solid-State Lithium Metal Batteries.

Residual solvents in vinylidene fluoride (VDF)-based solid polymer electrolytes (SPEs) have been recognized as responsible for their high ionic conductivity. However, side reactions by the residual solvents with the lithium (Li) metal induce poor stability, which has been long neglected. This study proposes a strategy to achieve a delicate equilibrium between ion conduction and electrode stability for VDF-based SPEs. Specifically, 2,2,2-trifluoro-N,N-dimethylacetamide (FDMA) is developed as the nonside reaction solvent for poly(vinylidene fluoride-co-hexafluoropropylene) (PVHF)-based SPEs, achieving both high ionic conductivity and significantly improved electrochemical stability. The developed FDMA solvent fosters the formation of a stable solid electrolyte interphase (SEI) through interface reactions with Li metal, effectively mitigating side reactions and dendrite growth on the Li metal electrode. Consequently, the Li||Li symmetric cells and Li||LiFePO4 cells demonstrate excellent cycling performance, even under limited Li (20 µm thick) supply and high-loading cathodes (>10 mg cm-2, capacity >1 mAh cm-2) conditions. The stable Li||LiCoO2 cells operation with a cutoff voltage of 4.48 V indicates the high-voltage stability of the developed SPE. This study offers valuable insights into the development of advanced VDF-based SPEs for enhanced lithium metal battery performance and longevity.

Phase Engineering of High-Entropy Alloy for Enhanced Electrocatalytic Nitrate Reduction to Ammonia.

Directly electrochemical conversion of nitrate (NO3-) is an efficient and environmentally friendly technology for ammonia (NH3) production but is challenged by highly selective electrocatalysts. High-entropy alloys (HEAs) with unique properties are attractive materials in catalysis, particularly for multi-step reactions. Herein, we first reported the application of HEA (FeCoNiAlTi) for electrocatalytic NO3- reduction to NH3 (NRA). The bulk HEA is active for NRA but limited by the unsatisfied NH3 yield of 0.36 mg h-1 cm-2 and Faradaic efficiency (FE) of 82.66%. Through an effective phase engineering strategy, uniform intermetallic nanoparticles are introduced on the bulk HEA to increase electrochemical active surface area and charge transfer efficiency.The resulting nanostructured HEA (n-HEA) delivers enhanced electrochemical NRA performance in terms of NH3 yield (0.52 mg h-1 cm-2) and FE (95.23%). Further experimental and theoretical investigations reveal that the multi-active sites (Fe, Co, and Ni) dominated electrocatalysis for NRA over the n-HEA. Notably, the typical Co sites exhibit the lowest energy barrier for NRA with *NO + H+ + e- → *NOH as the rate-determining step.

Anion-Cation Competition Chemistry for Comprehensive High-Performance Prussian Blue Analogs Cathodes.

The extensively studied Prussian blue analogs (PBAs) in various batteries are limited by their low discharge capacity, or subpar rate etc., which are solely reliant on the cation (de)intercalation mechanism. In contrast to the currently predominant focus on cations, we report the overlooked anion-cation competition chemistry (Cl-, K+, Zn2+) stimulated by high-voltage scanning. With our designed anion-cation combinations, the KFeMnHCF cathode battery delivers comprehensively superior discharge performance, including voltage plateau >2.0 V (vs. Zn/Zn2+), capacity >150 mAh g-1, rate capability with capacity maintenance above 96 % from 0.6 to 5 A g-1, and cyclic stability exceeding 3000 cycles. We further verify that such comprehensive improvement of electrochemical performance utilizing anion-cation competition chemistry is universal for different types of PBAs. Our work would pave a new and efficient road towards the next-generation high-performance PBAs cathode batteries.

Steering sp-Carbon Content in Graphdiynes for Enhanced Two-Electron Oxygen Reduction to Hydrogen Peroxide.

Compared to sp2-hybridized graphene, graphdiynes (GDYs) composed of sp and sp2 carbon are highly promising as efficient catalysts for electrocatalytic oxygen reduction into oxygen peroxide because of the high catalytic reactivity of the electron-rich sp-carbon atoms. The desired catalytic capacity of GDY, such as catalytic selectivity and efficiency, can theoretically be achieved by strategically steering the sp-carbon contents or the topological arrangement of the acetylenic linkages and aromatic bonds. Herein, we successfully tuned the electrocatalytic activity of GDYs by regulating the sp-to-sp2 carbon ratios with different organic monomer precursors. As the active sp-carbon atoms possess electron-sufficient π orbitals, they can donate electrons to the lowest unoccupied molecular orbital (LUMO) orbitals of O2 molecules and initiate subsequent O2 reduction, GDY with the high sp-carbon content of 50 at % exhibits excellent capability of catalyzing O2 reduction into H2O2. It demonstrates exceptional H2O2 selectivity of over 95.0 % and impressive performance in practical H2O2 production, Faraday efficiency (FE) exceeding 99.0 %, and a yield of 83.3 nmol s-1 cm-2. Our work holds significant importance in effectively steering the inherent properties of GDYs by purposefully adjusting the sp-to-sp2 carbon ratio and highlights their immense potential for research and applications in catalysis and other fields.

Distinguish MnO2/Mn2+ Conversion/ Zn2+ Intercalation/ H+ Conversion Chemistries at Different Potentials in Aqueous Zn||MnO2 Batteries.

The rechargeable aqueous Zn||MnO2 chemistry has been extensively explored, but its electrochemical reaction mechanisms, especially in the context of MnO2/Mn2+ conversion and Zn2+/H+ intercalation chemistry, remain not fully understood. Here, we designed an amphiphilic hydrogel electrolyte, which distinguished the MnO2/Mn2+ conversion, Zn2+ intercalation, and H+ intercalation and conversion processes at three distinct discharge plateaus of an aqueous Zn||MnO2 battery. The amphiphilic hydrogel electrolyte is featured with an extended electrochemical stability window up to 3.0 V, high ionic conductivity, Zn2+-selective ion tunnels, and hydrophobic associations with cathode materials. This specifically designed electrolyte allows the MnO2/Mn2+ conversion reaction at a discharge plateau of 1.75 V. More interesting, the discharge plateaus of ~1.33 V, previously assigned as the co-intercalation of Zn2+ and H+ ions in the MnO2 cathode, are specified as the exclusive intercalation of Zn2+ ions, leading to an ultra-flat voltage plateau. Furthermore, with a distinct three-step electrochemical energy storage process, a high areal capacity of 1.8 mAh cm-2 and high specific energy of 0.858 Wh cm-2, even at a low MnO2 loading mass of 0.5 mg cm-2 are achieved. To our knowledge, this is the first report to fully distinguish different mechanisms at different potentials in aqueous Zn||MnO2 batteries.

Halogen-powered static conversion chemistry.

Halogen-powered static conversion batteries (HSCBs) thrive in energy storage applications. They fall into the category of secondary non-flow batteries and operate by reversibly changing the chemical valence of halogens in the electrodes or/and electrolytes to transfer electrons, distinguishing them from the classic rocking-chair batteries. The active halide chemicals developed for these purposes include organic halides, halide salts, halogenated inorganics, organic-inorganic halides and the most widely studied elemental halogens. Aside from this, various redox mechanisms have been discovered based on multi-electron transfer and effective reaction pathways, contributing to improved electrochemical performances and stabilities of HSCBs. In this Review, we discuss the status of HSCBs and their electrochemical mechanism-performance correlations. We first provide a detailed exposition of the fundamental redox mechanisms, thermodynamics, conversion and catalysis chemistry, and mass or electron transfer modes involved in HSCBs. We conclude with a perspective on the challenges faced by the community and opportunities towards practical applications of high-energy halogen cathodes in energy-storage devices.

Halide Exchange in Perovskites Enables Bromine/Iodine Hybrid Cathodes for Highly Durable Zinc Ion Batteries.

With the increasing need for reliable storage systems, the conversion-type chemistry typified by bromine cathodes attracts considerable attention due to sizeable theoretical capacity, cost efficiency, and high redox potential. However, the severe loss of active species during operation remains a problem, leading researchers to resort to concentrated halide-containing electrolytes. Here, profiting from the intrinsic halide exchange in perovskite lattices, a novel low-dimensional halide hybrid perovskite cathode, TmdpPb2[IBr]6, which serves not only as a halogen reservoir for reversible three-electron conversions but also as an effective halogen absorbent by surface Pb dangling bonds, C─H…Br hydrogen bonds, and Pb─I…Br halogen bonds, is proposed. As such, the Zn||TmdpPb2[IBr]6 battery delivers three remarkable discharge voltage plateaus at 1.21 V (I0/I-), 1.47 V (I+/I0), and 1.74 V (Br0/Br-) in a typical halide-free electrolyte; meanwhile, realizing a high capacity of over 336 mAh g-1 at 0.4 A g-1 and high capacity retentions of 88% and 92% after 1000 cycles at 1.2 A g-1 and 4000 cycles at 3.2 A g-1, respectively, accompanied by a high coulombic efficiency of ≈99%. The work highlights the promising conversion-type cathodes based on metal-halide perovskite materials.

Surface atom knockout for the active site exposure of alloy catalyst.

The fine regulation of catalysts by the atomic-level removal of inactive atoms can promote the active site exposure for performance enhancement, whereas suffering from the difficulty in controllably removing atoms using current micro/nano-scale material fabrication technologies. Here, we developed a surface atom knockout method to promote the active site exposure in an alloy catalyst. Taking Cu3Pd alloy as an example, it refers to assemble a battery using Cu3Pd and Zn as cathode and anode, the charge process of which proceeds at about 1.1 V, equal to the theoretical potential difference between Cu2+/Cu and Zn2+/Zn, suggesting the electricity-driven dissolution of Cu atoms. The precise knockout of Cu atoms is confirmed by the linear relationship between the amount of the removed Cu atoms and the battery cumulative specific capacity, which is attributed to the inherent atom-electron-capacity correspondence. We observed the surface atom knockout process at different stages and studied the evolution of the chemical environment. The alloy catalyst achieves a higher current density for oxygen reduction reaction compared to the original alloy and Pt/C. This work provides an atomic fabrication method for material synthesis and regulation toward the wide applications in catalysis, energy, and others.

Zinc Powder Anodes for Rechargeable Aqueous Zinc-Based Batteries.

Aqueous rechargeable zinc-based batteries hold great promise for energy storage applications, with most research utilizing zinc foils as the anode. Conversely, the high tunability of zinc powder (Zn-P) makes it an ideal choice for zinc-based batteries, seamlessly integrating with current battery production technologies. However, challenges such as contact loss, dendrite formation, and a high tendency for corrosion significantly hamper the performance enhancement of Zn-P anodes. This review provides an overview of strategies adopted from various perspectives, including zinc powder optimization, electrode engineering, and electrolyte modification, to address these issues. Additionally, it explores the limitations of existing research and offers valuable insights into potential future directions for further advancements in Zn-P anodes.

Self-Charging Aqueous Zn//COF Battery with UltraHigh Self-Charging Efficiency and Rate.

Self-charging zinc batteries that combine energy harvesting technology with batteries are candidates for reliable self-charging power systems. However, the lack of rational materials design results in unsatisfactory self-charging performance. Here, a covalent organic framework containing pyrene-4,5,9,10-tetraone groups (COF-PTO) is reported as a cathode material for aqueous self-charging zinc batteries. The ordered channel structure of the COF-PTO provides excellent capacity retention of 98% after 18 000 cycles at 10 A g-1 and ultra-fast ion transfer. To visually assess the self-charging performance, two parameters, namely self-charging efficiency (self-charging discharge capacity/galvanostatic discharge capacity, η) and average self-charging rate (total discharge capacity after cyclic self-charging/total cyclic self-charging time, ν), are proposed for performance evaluation. COF-PTO achieves an impressive η of 96.9% and an ν of 30 mAh g-1 self-charge capacity per hour in 100 self-charging cycles, surpassing the previous reports. Mechanism studies reveal the co-insertion of Zn2+ and H+ double ions in COF-PTO of self-charging zinc batteries. In addition, the C═N and C═O (on the benzene) in COF-PTO are ortho structures to each other, which can easily form metal heterocycles with Zn ions, thereby driving the forward progress of the self-charging reaction and enhancing the self-charging performance.

Engineering Non-precious Trifunctional Cobalt-Based Electrocatalysts for Industrial Water Splitting and Ultra-High-Temperature Flexible Zinc-Air Battery.

Developing efficient, robust, and cost-effective trifunctional catalysts for the hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) at high current density and high temperature is crucial for water splitting at industry-level conditions and ultra-high-temperature Zinc-air battery (ZAB). Herein, cobalt nanoparticles well-integrated with nitrogen-doped porous carbon leaves (Co@NPCL) by direct annealing of core-shell bimetallic zeolite imidazolate frameworks is synthesized. Benefiting from the homogeneous distribution of metallic Co nanoparticles, the conductive porous carbon, and the doped N species, the as-fabricated Co@NPCL catalysts exhibit outstanding trifunctional performances with low overpotentials at 10 mA cm-2 for HER (87 mV) and OER (276 mV), long-lasting lifetime of over 2000 h, and a high half-wave potential of 0.86 V versus RHE for ORR. Meanwhile, the Co@NPCL catalyst can serve as both cathode and anode for water splitting at industrial conduction, and exhibit a stable cell voltage of 1.87 V to deliver a constant catalytic current of 500 mA cm-2 over 60 h. Moreover, the excellent trifunctional activity of Co@NPCL enables the flexible ZAB to operate efficiently at ultra-high temperature of 70 °C, delivering 162 mW cm-2 peaks power density and an impressive stability for 4500 min at 2 mA cm-2 .

Fine Tuning Water States in Hydrogels for High Voltage Aqueous Batteries.

Hydrogels are widely used as quasi-solid-state electrolytes in aqueous batteries. However, they are not applicable in high-voltage batteries because the hydrogen evolution reaction cannot be effectively suppressed even when water is incorporated into the polymer network. Herein, by profoundly investigating the states of water molecules in hydrogels, we designed supramolecular hydrogel electrolytes featuring much more nonfreezable bound water and much less free water than that found in conventional hydrogels. Specifically, two strategies are developed to achieve this goal. One strategy is adopting monomers with a variety of hydrophilic groups to enhance the hydrophilicity of polymer chains. The other strategy is incorporating zwitterionic polymers or polymers with counterions as superhydrophilic units. In particular, the nonfreezable bound water content increased from 0.129 in the conventional hydrogel to >0.4 mg mg-1 in the fabricated hydrogels, while the free water content decreased from 1.232 to ∼0.15 mg mg-1. As a result, a wide electrochemical stability window of up to 3.25 V was obtained with the fabricated hydrogels with low concentrations of incorporated salts and enhanced hydrophilic groups or superhydrophilic groups. The ionic conductivities achieved with our developed hydrogel electrolytes were much higher than those in the conventional highly concentrated salt electrolytes, and their cost is also much lower. The designed supramolecular hydrogel electrolytes endowed an aqueous K-ion battery (AKIB) system with a high voltage plateau of 1.9 V and contributed to steady cycling of the AKIB for over 3000 cycles. The developed supramolecular hydrogel electrolytes are also applicable to other batteries, such as aqueous lithium-ion batteries, hybrid sodium-ion batteries, and multivalent-ion aqueous batteries, and can achieve high voltage output.

Asymmetric Anion Zinc Salt Derived Solid Electrolyte Interphase Enabled Long-Lifespan Aqueous Zinc Bromine Batteries.

Organic additives with high-reduction potentials are generally applied in aqueous electrolytes to stabilize the Zn anode, while compromise safety and environmental compatibility. Highly concentrated water-in-salt electrolytes have been proposed to realize the high reversibility of Zn plating/stripping; however, their high cost and viscosity hinder their practical applications. Therefore, exploring low-concentration Zn salts, that can be used directly to stabilize Zn anodes, is of primary importance. Herein, we developed an asymmetric anion group, bi(difluoromethanesulfonyl)(trifluoromethanesulfonyl)imide (DFTFSI- )-based novel zinc salt, Zn(DFTFSI)2 , to obtain a high ionic conductivity and a highly stable dendrite-free Zn anode. Experimental tests and theoretical calculations verified that DFTFSI- in the Zn2+ solvation sheath and inner Helmholtz plane would be preferentially reduced to construct layer-structured SEI films, inhibiting hydrogen evolution and side reactions. Consequently, the Zn | | ${||}$ Zn symmetric cell with 1M Zn(DFTFSI)2 aqueous electrolyte delivers an ultralong cycle life for >2500 h outperforming many other conventional Zn salt electrolytes. The Zn | | ${||}$ Br2 battery also exhibits a long lifespan over 1200 cycles at ~99.8 % Coulombic efficiency with a high capacity retention of 92.5 %. Furthermore, this outstanding performance translates well to a high-areal-capacity Zn | | ${||}$ Br2 battery (~5.6 mAh ⋅ cm-2 ), cycling over 320 cycles with 95.3 % initial capacity retained.

Development of Inverse-Opal-Structured Charge-Deficient Co9S8@nitrogen-Doped-Carbon to Catalytically Enable High Energy and High Power for the Two-Electron Transfer I+/I- Electrode.

The iodine (I) electrode involving two-electron transfer chemistry by converting between I+ and I-, has the potential to deliver theoretically doubled capacity and higher working voltage platforms, thus achieving higher energy density. However, owing to the slow kinetics of the cascade two-electron transfer reactions, the system suffers from large overpotentials and low power density, especially at high working currents and low temperatures. Here, an inverse-opal-structured cobalt sulfide@nitrogen-doped-carbon (Co9S8@NC) catalyst with unique charge-deficient states is developed to promote the reaction kinetics of the I-/I+ electrode. The charge-deficient Co9S8@NC catalyst not only enables strong physicochemical adsorption with the iodine species but also significantly reduces the activation energy and interfacial charge transfer resistance of the cascade I+/I0/I- conversion reaction. Consequently, the prototypical Zn‖I+/I0/I- battery equipped with the Co9S8@NC catalyst can deliver a high energy density of 554 Wh kg-1 and a stable cycle life of 5000 cycles at 30 °C. Moreover, at a subzero temperature of -30 °C, the battery can exhibit enhanced kinetics and a high power density of 1514 W kg-1, high energy density of 485 Wh kg-1.

Concurrent Mechanisms of Hot Electrons and Interfacial Water Molecule Ordering in Plasmon-Enhanced Nitrogen Fixation.

The participation of high-energy hot electrons generated from the non-radiative decay of localized surface plasmons is an important mechanism for promoting catalytic processes. Herein, another vital mechanism associated with the localized surface plasmon resonance (LSPR) effect, significantly contributing to the nitrogen reduction reaction (NRR), is found. That is to say, the LSPR-induced strong localized electric fields can weaken the intermolecular hydrogen bonds and regulate the arrangement of water molecules at the solid-liquid interface. The AuCu pentacle nanoparticles with excellent light absorption ability and the capability to generate strong localized electric fields are chosen to demonstrate this effect. The in situ Raman spectra and theoretical calculations are employed to verify the mechanism at the molecular scale in a nitrogen fixation process. Meanwhile, due to the promoted electron transfer at the interface by the well-ordered interfacial water, as well as the participation of high-energy hot electrons, the optimal catalyst exhibits excellent performance with an NH3 yield of 52.09 µg h-1 cm-2 and Faradaic efficiency (FE) of 45.82% at ─0.20 V versus RHE. The results are significant for understanding the LSPR effect in catalysis and provide a new approach for regulating the reaction process.