ABSTRACT
Poly(l-lactic acid) (PLLA) featuring desirable biodegradability and biocompatibility has been recognized as one of the promising eco-friendly biomaterials. However, low crystallization and poor mechanical and chemical performances dramatically hamper its practical application. In this work, we report that functionalized cellulose/PLLA composite superhydrophobic stereocomplex films with controllable water adhesion and protein adsorption can be fabricated by a facile approach for the first time. First, cellulose is surface-modified by means of two silanization modification methods. Then, superhydrophobic cellulose/PLLA composite films are prepared through a solvent-evaporation-induced phase separation method. The two cellulose/PLLA composite films exhibit extreme water repellency but tunable water adhesion from sticky to slippery. The protein adsorption capacity of the cellulose/PLLA composite films can also be regulated. In addition, the stereocomplexation of the composite film provides excellent mechanical properties with an elongation at break of 22.36%, which is 237.8% higher than that of a pure PLLA film, which is more suitable for biomaterials. Furthermore, good biodegradability of the PLLA composite films in nature enables the bio-based composites as alternative materials to replace conventional petroleum-based polymers. The superhydrophobic films have also been demonstrated for many applications, including slippery surfaces, liquid transportation without loss, and antifouling.
ABSTRACT
In this work, superhydrophobic poly(l-lactic acid) (PLLA) hierarchical membranes exhibiting excellent oil-removal performance, which is of great importance in curbing the oil-pollution environment, were fabricated by a simple solvent-evaporation-induced precipitation method. PLLA membranes with hierarchical micro/nanostructures (fish scales, fibrous sheets, and petal-like morphology) can be conveniently prepared by adjusting the preparation parameters including PLLA concentration, precipitation temperature, type of solvent and nonsolvent, and the addition of nano-SiO2. The results show that the water contact angle of the fish-scale-structured PLLA membrane was 138.6°, revealing that water repellency was significantly improved compared to that of the solvent-casting PLLA membrane (â¼72.8°). Moreover, the PLLA/SiO2 nanocomposite membrane with a dense hierarchical micro/nanostructure had a water contact angle greater than 167.1°, which has great potential in oil-water separation.
ABSTRACT
Superhydrophobic films that are simple, inexpensive, corrosion-resistant and multifunctional are in high demand for industrial applications. We propose a simple and economical phase separation method for fabricating superhydrophobic films using polylactic acid (PLA), nano-SiO2 and a mixture of good and poor solvents to construct a rough surface with a nano/microstructured morphology. The phase separation-induced superhydrophobic PLA/SiO2 composite film with a porous network structure has a water contact angle greater than 164°. This method can be applied to a variety of surfaces or used in large-scale industrial production. The fabricated superhydrophobic films may be applied in biological fields because PLA is a good biodegradable material.
