Highly Porous Co-Al Intermetallic Created by Thermal Explosion Using NaCl as a Space Retainer.

Co-Al porous materials were fabricated by thermal explosion (TE) reactions from Co and Al powders in a 1:1 ratio using NaCl as a space retainer. The effects of the NaCl content on the temperature profiles, phase structure, volume change, density, pore distribution and antioxidation behavior were investigated. The results showed that the sintered product of Co and Al powders was solely Co-Al intermetallic, while the final product was Co4Al13 with an abundant Co phase and minor Co2Al5 and Co-Al phases after added NaCl dissolved out, due to the high Tig and low Tc. The open porosity of sintered Co-Al compound was sensibly improved to 79.5% after 80 wt.% of the added NaCl dissolved out. Moreover, porous Co-Al intermetallic exhibited an inherited pore structure, including large pores originating from the dissolution of NaCl and small pores in the matrix caused by volume expansion due to TE reaction. The interconnected large and small pores make the open cellular Co-Al intermetallic suitable for broad application prospects in liquid-gas separation and filtration.

Sensitivity enhancement of an all-solid FPE sensor via a programmable Vernier effect.

All-solid, open-cavity fiber optic Fabry-Perot etalon (FPE) sensors possess a wide static pressure detection range, yet their low sensitivity significantly restricts their application. This study proposes a programmable Vernier effect to improve the gas pressure sensitivity of FPE sensors substantially. By effectively modulating the emission spectrum of a widely tunable laser using a variable optical attenuator (VOA), the emission spectrum at different modulation lengths is expected to produce an optical beating in conjunction with the transmission spectrum of the FPE sensor, thereby realizing the Vernier effect. Experimental results indicate that by utilizing the proposed programmable Vernier effect, the pressure sensitivity of the FPE sensor has increased to -612.21 pm/kPa, demonstrating an amplification in sensitivity of approximately -153 times, consistent with the theoretical results. Owing to the programmable Vernier effect, which flexibly enhances the sensitivity of the FPE sensor, this sensor demonstrates considerable potential for gas pressure monitoring under various extreme conditions.

Highly precise thickness measurement of multilayer films based on the cross-correlation algorithm using a widely tunable MG-Y laser.

Inspired by the demodulation algorithm of Fabry-Perot composite sensors in the field of fiber-optic sensing, this paper proposes a method based on a widely tunable modulated grating Y-branch (MG-Y) laser combined with the cross-correlation algorithm to achieve a highly precise measurement of the optical thickness of each layer of a multilayer optical sample. A sample consisting of a double glass stack was selected, and the interference spectrum of the stacked sample was acquired using a widely tunable MG-Y laser. A fast Fourier transform (FFT) algorithm combined with a finite impulse response (FIR) bandpass filter was utilized to separate the different frequency components of the multilayer optical sample. The normalized spectra of each layer were reconstructed using the Hilbert transform. Subsequently, a cross-correlation algorithm was employed to process the normalized spectrum and determine the optical thickness of each layer with high precision. The samples were measured at predetermined locations, with 150 consecutive measurements performed to assess the repetition of the thickness. The standard deviation of these measurements was found to be lower than 1.5 nm. The results show that the cross-correlation algorithm is advantageous in the optical thickness measurement of multilayer films.

Deficiency of MFSD6L, an acrosome membrane protein, causes oligoasthenoteratozoospermia in humans and mice.

Oligoasthenoteratozoospermia is an important factor affecting male fertility and has been found to be associated with genetic factors. However, there are still a proportion of oligoasthenoteratozoospermia cases that cannot be explained by known pathogenic genetic variants. Here, we perform genetic analyses and identify bi-allelic loss-of-function variants of MFSD6L from an oligoasthenoteratozoospermia-affected family. Mfsd6l knock-out male mice also present male subfertility with reduced sperm concentration, motility, and deformed acrosomes. Further mechanistic analyses reveal that MFSD6L, as an acrosome membrane protein, plays an important role in the formation of acrosome by interacting with the inner acrosomal membrane protein SPACA1. Moreover, poor embryonic development is consistently observed after intracytoplasmic sperm injection treatment using spermatozoa from the MFSD6L-deficient man and male mice. Collectively, our findings reveal that MFSD6L is required for the anchoring of sperm acrosome and head shaping. The deficiency of MFSD6L affects male fertility and causes oligoasthenoteratozoospermia in humans and mice.

[Treatment of open fracture bone defect of distal femur with antibiotic cement column and bone graft].

OBJECTIVE: To investigate the efficacy of antibiotic cement column combined with iliac bone graft in the treatment of open fracture with bone defect of distal femur. METHODS: From October 2014 to March 2021, 16 patients of open fracture bone defect of distal femur were treated with antibiotic bone cement column and iliac bone graft, including 12 males and 4 females. The age ranged from 28 to 68 years old. There were 11 cases of traffic accident injury, 5 cases of falling injury, 3 cases as Gustilo type Ⅰ, 5 cases as type Ⅱ and 8 cases as type ⅢA. AO classification was used:9 cases of C2 type and 7 cases of C3 type. The time from injury to final bone grafting ranged from 4 to 119 days. The length of bone defect ranged from 2 to10 cm. Fractures healing time, complications and knee function Merchan score were recorded. RESULTS: All the 16 patients were followed up from 9 to 29 months. The incisions of 16 patients healed in one stage without postoperative infection, plate fracture, limb shortening and valgus and varus deformity. The healing time randed from 4 to 10 months . Knee joint function according to the Merchant scoring standard, showed that 8 cases were excellent, 4 cases were good, 3 cases were fair, and 1 case was poor. CONCLUSION: The use of antibiotic bone cement column combined with iliac bone graft in the treatment of open and complex bone defects of distal femur is an effective surgical method to prevent infection, assist fracture reduction, increase fixation strength and significantly reduce the amount of bone grafting.

Spatiotemporal drivers of urban water pollution: Assessment of 102 cities across the Yangtze River Basin.

Effective management of large basins necessitates pinpointing the spatial and temporal drivers of primary index exceedances and urban risk factors, offering crucial insights for basin administrators. Yet, comprehensive examinations of multiple pollutants within the Yangtze River Basin remain scarce. Here we introduce a pollution inventory for urban clusters surrounding the Yangtze River Basin, analyzing water quality data from 102 cities during 2018-2019. We assessed the exceedance rates for six pivotal indicators: dissolved oxygen (DO), ammonia nitrogen (NH3-N), chemical oxygen demand (COD), biochemical oxygen demand (BOD), total phosphorus (TP), and the permanganate index (CODMn) for each city. Employing random forest regression and SHapley Additive exPlanations (SHAP) analyses, we identified the spatiotemporal factors influencing these key indicators. Our results highlight agricultural activities as the primary contributors to the exceedance of all six indicators, thus pinpointing them as the leading pollution source in the basin. Additionally, forest coverage, livestock farming, chemical and pharmaceutical sectors, along with meteorological elements like precipitation and temperature, significantly impacted various indicators' exceedances. Furthermore, we delineate five core urban risk components through principal component analysis, which are (1) anthropogenic and industrial activities, (2) agricultural practices and forest extent, (3) climatic variables, (4) livestock rearing, and (5) principal polluting sectors. The cities were subsequently evaluated and categorized based on these risk components, incorporating policy interventions and administrative performance within each region. The comprehensive analysis advocates for a customized strategy in addressing the discerned risk factors, especially for cities presenting elevated risk levels.

The Role of MicroRNA-206 in the Regulation of Diabetic Wound Healing via Hypoxia-Inducible Factor 1-Alpha.

Successful wound healing in diabetic patients is hindered by dysregulated miRNA expression. This study aimed to investigate the abnormal expression of miRNAs in diabetic wound healing and the potential therapeutic role of modulating the miR-206/HIF-1α pathway. MicroRNA assays were used to identify differentially expressed miRNAs in diabetic wound sites and adjacent areas. In vitro models and a rat diabetic model were established to evaluate the effects of miR-206 on HIF-1α regulation and wound healing. The study revealed differential expression of miR-206 in diabetic wound tissues, its interaction with HIF-1α, and the inhibitory effect of miR-206 on cell growth under high glucose conditions. Modulating the miR-206/HIF-1α pathway using miR-206 antagomir promoted HIF-1α, CD34, and VEGF expression, ultimately enhancing diabetic wound healing.

Comparison of Locking Plate Alone and Locking Plate Combined with 3D Printed Polymethylmethacrylate Augmentation in Treating Proximal Humerus Fractures in the Elderly.

BACKGROUND: Locking plates are widely used in open reduction internal fixation (ORIF) for proximal humeral fracture (PHF). However, the optimal surgical treatment of unstable, displaced PHF in elderly patients remains controversial. This study aimed to compare the radiological and clinical outcomes of surgical treatment of PHF in the elderly with locking plate (LP) alone and locking plate combined with 3D printed polymethylmethacrylate (PMMA) prosthesis augmentation (LP-PA). METHODS: From May 2015 to April 2021, a total of 97 patients aged ≥ 60 years with acute unstable PHF who underwent osteosynthesis with either LP (46 patients) or LP-PA (51 patients) were retrospectively analyzed. For the LP-PA group, a customized proximal humeral prosthesis made of PMMA cement was intra-operatively fabricated by a three-dimensional (3D) printed prototype mold for the humeral medial support. Radiological outcomes were analyzed by measuring the value of neck-shaft angle (NSA) and humeral head height (HHH). The clinical outcomes were evaluated using Constant-Murley Score (CMS), Disabilities of the Arm Shoulder and Hand (DASH) score, American Shoulder and Elbow Surgeons (ASES) score, and the shoulder range of motion (ROM). Pain was measured using a visual analogue scale (VAS). RESULTS: At the one-year follow-up, all fractures healed radiologically and clinically. The mean changes of NSA and HHH over the follow-up period were markedly smaller in the LP-PA group (3.8 ± 0.9° and 1.7 ± 0.3 mm) than those in the LP group (9.7 ± 2.1° and 3.2 ± 0.6 mm, both P < 0.0001). The LP-PA group also presented lower DASH score (17.1 ± 3.6), higher ASES score (89.5 ± 11.2) and better ROM in forward elevation (142 ± 26°) and external rotation (59 ± 11°) compared to the LP group (28.9 ± 4.8 for DASH score, P < 0.0001; 82.3 ± 9.0 for ASES score, P < 0.001; 129 ± 21° for forward elevation, P = 0.008; and 52 ± 9° for external rotation, P = 0.001). There was no significant difference in overall complication rate between the two groups, although the complication rate of screw perforation was higher in the LP-PA group (P = 0.172). CONCLUSIONS: For PHF in elderly patients, the combination of LP fixation and PMMA prosthesis augmentation effectively improved humeral head support and reduction maintenance, providing satisfactory outcomes both radiologically and clinically. This technique also reduced the incidence of screw perforation associated with plate fixation alone, making it a reasonable option to ensure satisfactory clinical outcomes.

Efficient nitrogen removal by multi-stage A/O mud membrane composite process with segmented influent: Performance and microbial community structure.

In this paper, a multi-stage A/O mud membrane composite process with segmented influent was constructed for the first time and compared with the traditional activated sludge process and the multi-stage A/O pure membrane process with segmented influent. The nitrogen removal efficiency of the process under different influencing factors was studied. Under the optimum conditions, the highest removal rate of ammonia nitrogen can reach 99%, and the average removal rate of total nitrogen was 80%. The removal rate of COD in effluent reached 93%. The relative abundance of Proteobacteria was the highest in the multi-stage A/O mud membrane composite reactor with segmented influent. The community diversity and richness of activated sludge and biofilm in aerobic pool were the highest. Dechloromonas, Flavobacterium and Rhodobacter were dominant bacteria, and they were aerobic denitrifying bacteria that significantly contributed to the removal rate of ammonia nitrogen.

Open Distal Femur Fractures Treated with Bone Cement Intramedullary Support Combined with Locked Plate Fixation.

Objective: The objective of this study was to assess the short-term clinical efficacy of the short-term clinical efficacy of bone cement intramedullary support combined with locked plate fixation in the treatment of such fractures. Methods: A retrospective study including 21 patients was reviewed at an urban level one trauma center. There were 17 males and 4 females, with a mean age of 33.9 years. Gustilo grade was II (12 cases), III-A (6 cases), III-B (2 cases), and III-C (1 case). Two fractures were AO-OTA type 33A3, 9 cases were type 33C2, and 10 cases were type 33C3. After the first stage debridement and temporary external fixation, all patients received bone cement intramedullary support combined with locked plate fixation through an anterolateral incision at the second stage.. The perioperative complications, need for bone graft, alignment, and radiographic union were recorded. At 1-year follow-up, the range of knee motion was recorded, and functional results were evaluated by the Hospital for Special Surgery (HSS) knee score. Results: All 21 patients were followed up for 12-36 months, with an average of 18.7 months. 1 case had superficial wound infection, and 2 cases had partial skin edge necrosis of the original open wound. After symptomatic dressing changes, they all healed well. 4 cases had autogenous bone grafting. 18 patients (85.7%) achieved radiographic union, with a mean union time of 6.2 months. Two patients underwent secondary operation 9 months after surgery due to nonunion and finally united after autologous bone grafting. One patient developed a deep infection 8 months after surgery and was successfully treated with Masquelet technique. Finally, bone union was achieved 7 months after surgery. The alignment was good in 17 patients (81.0%). No deep infection or hardware failure occurred during 1-year follow-up. The average range of knee extension and flexion was 5.2 ° and 106.8 °, respectively. The HSS score averaged 83.6. Conclusions: Bone cement intramedullary support combined with locked plate fixation was an effective treatment modality of open distal femur fractures with high union rate, low complication, adequate alignment and satisfactory functional outcomes.