The Dynamic Interaction of Surfactants with Colloidal Molybdenum Disulfide Nanosheets Calls for Thermodynamic Stabilization by Solvents.

Top-down liquid-phase exfoliation (LPE) and bottom-up hot-injection synthesis are scalable methods to produce colloids of two-dimensional (2D) van der Waals (vdW) solids. Generally thought off as two entirely different fields, we show that similar stabilization mechanisms apply to colloids of molybdenum disulfide (MoS2) produced by both methods. By screening the colloidal stability of MoS2 produced in a hot-injection synthesis in a wide range of solvents, we observe that colloidal stability can be understood based on solution thermodynamics, wherein matching the solubility parameter of solvent and nanomaterial maximizes colloidal stability. Identical to MoS2 produced through LPE, optimal solvents to disperse MoS2 produced from the bottom-up have similar solubility parameters of ≈22 MPa1/2 and include aromatic solvents with polar functionalities, such as o-dichlorobenzene, and polar aprotic solvents, such as N,N-dimethylformamide. We further complemented our findings by nuclear magnetic resonance (NMR) spectrscopy, highlighting that organic surfactants, such as oleylamine and oleic acid, have a minimal affinity toward the nanocrystal surface and engage in a highly dynamic adsorption/desorption equilibrium. We thus conclude that hot injection yields MoS2 colloids with comparable surfaces as those produced by LPE. These similarities might offer the prospect of using established procedures developed for LPE nanomaterials to postprocess colloidally synthesized dispersions of 2D colloids as processable inks.

Colloidal WSe2 nanocrystals as anodes for lithium-ion batteries.

Transition metal dichalcogenides (TMDs) are gaining increasing interest in the field of lithium ion batteries due to their unique structure. However, previous preparation methods have mainly focused on their growth from substrates or by exfoliation of the bulk materials. Considering colloidal synthesis has many advantages including precision control of morphology and crystal phases, there is significant scope for exploring this avenue for active material formation. Therefore, in this work, we explore the applicability of colloidal TMDs using WSe2 nanocrystals for Li ion battery anodes. By employing colloidal hot-injection protocol, we first synthesize 2D nanosheets in 2H and 1T' crystal phases. After detailed structural and surface characterization, we investigate the performance of these nanosheets as anode materials. We found that 2H nanosheets outperformed 1T' nanosheets exhibiting a higher specific capacity of 498 mA h g-1 with an overall capacity retention of 83.28%. Furthermore, to explore the role of morphology on battery performance, 3D interconnected nanoflowers in 2H crystal phase were also investigated as an anode material. It is worth noting that a specific capacity of 982 mA h g-1 was exhibited after 100 cycles by these nanoflowers. The anode materials were characterized prior to cycling and after 1, 25, and 100 charge/discharge cycles, by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), to track the effects of cycling on the material.

Ultrafast carrier dynamics in colloidal WS2 nanosheets obtained through a hot injection synthesis.

In recent years, hot injection synthesis has emerged as a promising route for the production of nanostructured transition metal dichalcogenides, in large due to its better control over the crystallinity and monodispersity compared to other solution based methods. Understanding the photophysics of excitons in the thus obtained colloidal nanosheets is of great importance to explore their potential for applications in optoelectronics. Here, we study the carrier dynamics in these few-layer colloidal WS2 nanosheets by use of broadband transient absorption spectroscopy. The dynamics of both the bleach, linewidth broadening and energy shift across the entire visible and near-infrared spectrum, allows us to identify subpicosecond electron trapping as the main carrier loss channel. A more quantitative analysis shows that the intrinsic properties of colloidally synthesized nanosheets are on par with other synthesis methods, paving the way for this method to produce high quality nanosheets.

Fabrication of Two-Dimensional Lateral Heterostructures of WS2 /WO3 ⋠H2 O Through Selective Oxidation of Monolayer WS2.

Two-dimensional (2D) lateral heterostructures have emerged as a hot topic in the fast evolving field of advanced functional materials , but their fabrication is challenging. The layer-structured WS2 was theoretically demonstrated to be inert to oxidation except for the monolayer, which can be selectively oxidized owing to the simultaneous interaction of oxygen with both sides. Combined with the theoretical calculations, a new method was developed for the successful construction of 2D lateral heterostructures of WS2 /WO3 ⋅H2 O in an ambient environment, based on a simple liquid-phase solution exfoliation. These lateral heterostructures of WS2 /WO3 ⋅H2 O have interesting properties, as indicated by enhanced photocatalytic activity toward the degradation of methyl orange (MO).

A green route to fabricate MoS2 nanosheets in water-ethanol-CO2.

We show that bulk MoS2 can be efficiently exfoliated into ultrathin nanosheets in supercritical CO2 with ethanol as cosolvent. Moreover, such tailored MoS2 nanostructures, when they are directly used as labels for bioimaging, show excellent imaging effects with strong fluorescence and nontoxicity.