Measurements of selected brominated flame retardants in nursing women: implications for human exposure.

We have examined several emerging brominated flame retardants (BFRs) including 2-ethyl-1-hexyl-2,3,4,5-tetrabromobenzoate (TBB), bis(2-ethylhexyl) tetrabromophthalate (TBPH), 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), 4,5,6,7-tetrabromo-1,1,3-trimethyl-3-(2,3,4,5-tetrabromophenyl)-indane (OBIND), and decabromodiphenyl ethane (DBDPE) in paired human maternal serum (n = 102) and breast milk (n = 105) collected in 2008-2009 in the Sherbrooke region in Canada. Three legacy BFRs were also included in the study for comparison: decabromobiphenyl (BB-209), 2,2',4,4',5,5'-hexabromobiphenyl (BB-153), and 2,2',4,4',5,5'-hexabromodiphenyl ethers (BDE-153). TBB, BB-153, and BDE-153 had detection frequencies greater than 55% in both serum and milk samples. Their lipid weight (lw) adjusted median concentrations (ng g(-1) lw) in serum and milk were 1.6 and 0.41 for TBB, 0.48 and 0.31 for BB-153, and 1.5 and 4.4 for BDE-153, respectively. The detection frequencies for the other BFRs measured in serum and milk were 16.7% and 32.4% for TBPH, 3.9% and 0.0% for BTBPE, 2.0% and 0.0% for BB-209, 9.8% and 1.0% for OBIND, and 5.9% and 8.6% for DBDPE. The ratio of TBB over the sum of TBB and TBPH (fTBB) in serum (0.23) was lower than that in milk (0.46), indicating TBB has a larger tendency than TBPH to be redistributed from blood to milk. Overall, these data confirm the presence of non-PBDE BFRs in humans, and the need to better understand their sources, routes of exposure, and potential human health effects.

Hexachloronorbornene-based flame retardants in humans: levels in maternal serum and milk.

Five hexachloronorbornene-based flame retardants, Dechlorane Plus (DP), Dechlorane 602 (Dec 602), Dechlorane 603 (Dec 603), Dechlorane 604 (Dec 604) and hexachlorocyclopentadienyl-dibromocyclooctane (HCDBCO), were measured in human milk and maternal serum. Dec 602, Dec 603 and HCDBCO were detected in both sample matrices with detection frequencies over 60%. Dec 604 was not detected in serum and only detected in 4.8% of milk samples. DP was present in over 77-87% of serum and 40-50% of milk samples. DP levels found in this study were lower than those reported in two Chinese studies. The ratio of the two DP isomers found in human samples (f(anti-DP) = 0.8) remained similar to the ratio reported in the DP technical mixture. Levels of Dec 602 and Dec 603 in serum were correlated. Levels of Dec 602 and HCBDCO were also correlated in serum samples as well as in milk samples. These biomonitoring results have provided baseline information about the presence of these flame retardants in nursing women in Canada, which can be used for estimating human exposure to these chemicals.

In vitro dermal absorption of di(2-ethylhexyl) adipate (DEHA) in a roll-on deodorant using human skin.

In vitro dermal absorption experiments were conducted using a roll-on deodorant that contains 1.56% di(2-ethylhexyl) adipate (DEHA), a plasticizer widely used in consumer products. Human skin specimens were fitted in Bronaugh flow-through Teflon diffusion cells. The diffusion cells were maintained at 32 °C to reflect the skin temperature. Two amounts (low dose: 5 mg of the product; high dose: 100 mg) were applied, in triplicate, each on four different human skins. DEHA was determined in the receiver solution at 6-h intervals, using headspace solid-phase microextraction gas chromatography-mass spectrometry (GC-MS). After 24 h, the experiment was terminated and masses of DEHA in the skin depot, skin wash, and upper and lower chambers of the diffusion cell were determined. A significant portion of applied DEHA, 28% in the low amount application and 34% in the high one, was found in the skin depot. In comparison, only 0.04% and 0.002% of applied DEHA were found in the receiver solutions for the low and high doses, respectively. Under our experimental conditions, an apparent steady-state flux of low DEHA mass penetrating from skin into the receiver solution was observed with a penetration rate of 2.2 ng/cm(2)/h for both the low and high doses. The average mass recovery was 81% for the low dose application and 56% for the high dose.

Liquid chromatography/atmospheric pressure photoionization tandem mass spectrometry for analysis of Dechloranes.

Liquid chromatography/atmospheric pressure photoionization tandem mass spectrometry (LC/APPI-MS/MS) was investigated as an instrumental method for the analysis of the halogenated norbornene flame retardants, Mirex, Dechloranes 602, 603, 604, and Dechlorane Plus (DP). The LC separation was optimized by screening a variety of stationary and mobile phases, resulting in a short LC separation time of 5 min. Different atmospheric pressure ionization approaches were examined including electrospray ionization, atmospheric pressure chemical ionization, and APPI, each with and without post-column addition. APPI without post-column addition was chosen for providing the best ionization response. The optimized LC/APPI-MS/MS approach resulted in instrument detection limits ranging between 25 and 50 pg. Good linearity was also achieved (up to 25.0 ng/µL; R >0.999). The method was applied to extracts of environmental samples including surface water, fish and sediments for screening purposes, and the results agreed well with those obtained by gas chromatography/mass spectrometry.

Liquid chromatography/tandem mass spectrometry for analysis of 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH) and 1,2,5,6-tetrabromocyclooctane (TBCO).

Although the two flame retardants 1,2-dibromo-4-(1,2-dibromoethyl)cyclohexane (TBECH) and 1,2,5,6-tetrabromocyclooctane (TBCO) have been widely used, a selective instrumental method of analysis for these compounds has not been developed to date. In this study, we demonstrate the feasibility to utilize liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the separation and analysis of α- and ß-TBCO and α-, ß-, γ-, and δ-TBECH. Acetone was initially used in a tetrahedron solvent system for LC optimization. A simple isocratic elution allowed near-baseline separation of these compounds. Different ionization approaches and mechanisms were investigated. The mass spectrometric transition of [M + O(2)](-) => Br(-) (459.8 => 78.9) was a selective detection method for the target analytes. Good instrument detection limits (5 pg for γ-/δ-TBECH, 125 pg for α-/ß-TBECH, and 30 pg for α-/ß-TBCO with 2.0 µL injection) were obtained. Excellent linearity up to 50 ng/µL (R(2) >0.999) was also achieved. This method has been applied to environmental samples (surface water) for screening purposes with recoveries ranging from 76-92% (CV%: 5-8%). This method shows significant improvement over previous methods.

Development of liquid chromatography atmospheric pressure chemical ionization tandem mass spectrometry for analysis of halogenated flame retardants in wastewater.

Until recently, atmospheric pressure photoionization (APPI) has typically been used for the determination of non-polar halogenated flame retardants (HFRs) by liquid chromatography (LC) tandem mass spectrometry. In this study, we demonstrated the feasibility of utilizing liquid chromatography atmospheric pressure chemical ionization (APCI) tandem mass spectrometry (LC-APCI-MS/MS) for analysis of 38 HFRs. This developed method offered three advantages: simplicity, rapidity, and high sensitivity. Compared with APPI, APCI does not require a UV lamp and a dopant reagent to assist atmospheric pressure ionization. All the isomers and the isobaric compounds were well resolved within 14-min LC separation time. Excellent instrument detection limits (6.1 pg on average with 2.0 muL injection) were observed. The APCI mechanism was also investigated. The method developed has been applied to the screening of wastewater samples for screening purpose, with concentrations determined by LC-APCI-MS/MS agreeing with data obtained via gas chromatography high resolution mass spectrometry.

Liquid chromatography-atmospheric pressure photoionization tandem mass spectrometry for analysis of 36 halogenated flame retardants in fish.

A comprehensive, sensitive and high-throughput liquid chromatography-atmospheric pressure photoionization tandem mass spectrometry (LC-APPI-MS/MS) method has been developed for analysis of 36 halogenated flame retardants (HFRs). Under the optimized LC conditions, all of the HFRs eluted from the LC column within 14min, while maintaining good chromatographic separation for the isomers. Introduction of the pre-heated dopant to the APPI source decreased the background noise fivefold, which enhanced sensitivity. An empirical equation was proposed to describe the relation between the ion intensity and dopant flow. The excellent on-column instrument detection limits averaged 4.7pg, which was similar to the sensitivity offered by gas chromatography-high-resolution mass spectrometry (GC-HRMS). This method was used to analyze a series of fish samples. Good agreement was found between the results for PBDEs from LC-APPI-MS/MS and GC-HRMS.

Use of simultaneous dual-probe microdialysis for the determination of pesticide residues in a jade plant (Crassula ovata).

A microdialysis application for the sampling of plant pesticide residues has been developed utilizing two probes with differing perfusate rates simultaneously inserted into symmetric components of a sampling system. A simple empirical equation is proposed to calculate analyte concentrations in a semi-solid matrix using two different dialysate concentrations. In vitro application yielded excellent correlations between the calculated and spiked concentrations. Subsequent in vivo application of this technique for the determination of pesticide distributions in leaves of a jade plant (Crassula ovata) indicated the utility of this approach in complex living matrices.

Application of solid-phase microextraction for in vivo laboratory and field sampling of pharmaceuticals in fish.

Previous field studies utilizing solid-phase microextraction (SPME) predominantly focused on volatile and semivolatile compounds in air or water. Earlier in vivo sampling studies utilizing SPME were limited to the liquid matrix (blood). The present study has expanded the SPME technique to semisolid tissues under laboratory and field conditions through the investigation of both theoretical and applied experimental approaches. Pre-equilibrium extraction and desorption were performed in vivo in two separate animals. Excellent linearity was found between the amounts extracted by SPME from the muscle of living fish and the waterborne concentrations of pharmaceuticals. A simple SPME method is also described to simultaneously determine free and total analyte concentrations in living tissue. The utility of in vivo SPME sampling was evaluated in wild fish collected from a number of different river locations under varying degrees of influence from municipal wastewater effluents. Diphenhydramine and diltiazem were detected in the muscle of fish downstream of a local wastewater treatment plant. Based on this study, SPME demonstrated several important advantages such as simplicity, sensitivity, and robustness under laboratory and in vivo field sampling conditions.

Comparison of microdialysis with solid-phase microextraction for in vitro and in vivo studies.

Microdialysis (MD) and solid-phase microextraction (SPME) methods have been developed and compared through in vitro and in vivo studies. For in vitro study, both methods offered accurate and precise results for complex sample matrices by standard addition method. Compared to MD, the fully automated SPME procedure offered several advantages including high-throughput and more efficient sampling, less labor intensity, and capability for batch analysis. For in vivo study, although both techniques provided sampling with minimal perturbation to the system under study, SPME was more sensitive, precise and accurate, suitable for field sampling and had a wider application than MD. It demonstrated that SPME has the potential to replace MD for in vivo study.

Kinetic calibration using dominant pre-equilibrium desorption for on-site and in vivo sampling by solid-phase microextraction.

A new kinetic calibration was developed using dominant pre-equilibrium desorption by solid-phase microextracton. The calibration was based on isotropism between absorption and desorption, which was proved theoretically and experimentally in an aqueous solution and semisolid matrix. This approach allows for the calibration of absorption using desorption to compensate for matrix effects. Moreover, concentration profiles are initially proposed to verify isotropism between the absorption and desorption, while providing a linear approach to obtain time constants for the purpose of quantitative analysis. This linear approach is more convenient, robust, and accurate than the nonlinear version with the previously used time profiles. Furthermore, the target analytes are used as the internal standards; thus, radioactive or deuterated internal standards are not necessary. In addition, dominant pre-equilibrium desorption utilizes the pre-equilibrium approach and offers a shorter sample preparation time, which is typically suitable for in vivo sampling. This kinetic calibration method was successfully applied to prepare samples of polycyclic aromatic hydrocarbons in a flow-through system and in vivo pesticide sampling in a jade plant (Crassula ovata).