Ag-Introduced Antibacterial Ability and Corrosion Resistance for Bio-Mg Alloys.

Bone implants are expected to possess antibacterial ability and favorable biodegradability. Ag possesses broad-spectrum antibacterial effects through destroying the respiration and substance transport of bacteria. In this study, Ag was introduced into Mg-3Zn-0.5Zr (ZK30) via selective laser melting technology. Results showed that ZK30-Ag exhibited a strong and stable antibacterial activity against the bacterium Escherichia coli. Moreover, the degradation resistance was enhanced due to the comprehensive effect of positive shifted corrosion potential (from -1.64 to -1.53 V) and grains refinement. The positive shifted corrosion potential reduced the severe galvanic corrosion by lowering the corrosion potential difference between the matrix and the second phase. Meanwhile, the introduction of Ag caused the grain refinement strengthening and precipitated-phase strengthening, resulting in improved compressive yield strength and hardness. Furthermore, ZK30-0.5Ag exhibited good biocompatibility. It was suggested that Ag-modified ZK30 was potential candidate for bone implants.

Biodegradation Resistance and Bioactivity of Hydroxyapatite Enhanced Mg-Zn Composites via Selective Laser Melting.

Mg-Zn alloys have attracted great attention as implant biomaterials due to their biodegradability and biomechanical compatibility. However, their clinical application was limited due to the too rapid degradation. In the study, hydroxyapatite (HA) was incorporated into Mg-Zn alloy via selective laser melting. Results showed that the degradation rate slowed down due to the decrease of grain size and the formation of protective layer of bone-like apatite. Moreover, the grain size continually decreased with increasing HA content, which was attributed to the heterogeneous nucleation and increased number of nucleation particles in the process of solidification. At the same time, the amount of bone-like apatite increased because HA could provide favorable areas for apatite nucleation. Besides, HA also enhanced the hardness due to the fine grain strengthening and second phase strengthening. However, some pores occurred owing to the agglomerate of HA when its content was excessive, which decreased the biodegradation resistance. These results demonstrated that the Mg-Zn/HA composites were potential implant biomaterials.

Preparation and characterization of laser-melted Mg-Sn-Zn alloys for biomedical application.

The rapid degradation rate of Magnesium (Mg) alloy limits its biomedical application even though it possesses outstanding biological performance and biomechanical compatibility. In this study, a combined method of laser rapid melting and alloying Zinc (Zn) was proposed to decrease the degradation rate of Mg-Sn alloy. The microstructure, degradation behaviors and mechanical properties of the laser-melted Mg-5Sn-xZn (x = 0, 2, 4, 6 and 8 wt.%) alloys were investigated. The results indicated that the grain size of the alloys decreased with increasing Zn content, due to the increased number of nucleation particles formed in the process of solidification. Moreover, the laser-melted Mg-Sn alloys possessed finer grains compared with traditional as-cast and as-rolled Mg-Sn alloys. The degradation rate of the alloys decreased with increasing Zn content (0-4 wt.%), which was ascribed to the grain refinement and the formation of Zn(OH)2 protective layer. However, the degradation rate increased as the Zn content further increased (4-8 wt.%), which was caused by the galvanic corrosion between the Mg matrix and the generated Mg7Zn3 phase. Besides, Zn also increased the hardness of the alloys owing to the grain refinement strengthening and solid solution strengthening.

The Enhancement of Mg Corrosion Resistance by Alloying Mn and Laser-Melting.

Mg has been considered a promising biomaterial for bone implants. However, the poor corrosion resistance has become its main undesirable property. In this study, both alloying Mn and laser-melting were applied to enhance the Mg corrosion resistance. The corrosion resistance, mechanical properties, and microstructure of rapid laser-melted Mg-xMn (x = 0-3 wt %) alloys were investigated. The alloys were composed of dendrite grains, and the grains size decreased with increasing Mn. Moreover, Mn could dissolve and induce the crystal lattice distortion of the Mg matrix during the solidification process. Mn ranging from 0-2 wt % dissolved completely due to rapid laser solidification. As Mn contents further increased up to 3 wt %, a small amount of Mn was left undissolved. The compressive strength of Mg-Mn alloys increased first (up to 2 wt %) and then decreased with increasing Mn, while the hardness increased continuously. The refinement of grains and the increase in corrosion potential both made contributions to the enhancement of Mg corrosion resistance.