ABSTRACT
Although Miura origami has excellent planar expansion characteristics and good mechanical properties, its congenital flaws, e.g., open sections leading to weak out-of-plane stiffness and constituting the homogenization of the material, and resulting in limited design freedom, should also be taken seriously. Herein, two identical Miura sheets, made of carbon fiber/epoxy resin composite, were bonded to form a tubular structure with closed sections, i.e., an origami tube. Subsequently, the dynamic performances, including the nature frequency and the dynamic displacement response, of the designed origami tubes were extensively investigated through numerical simulations. The outcomes revealed that the natural frequency and corresponding dynamic displacement response of the structure can be adjusted in a larger range by varying the geometric and material parameters, which is realized by combining origami techniques and the composite structures' characteristics. This work can provide new ideas for the design of light-weight and high-mechanical-performance structures.
ABSTRACT
BACKGROUND: Early clinical cracked tooth can be a perplexing disorder to diagnose and manage. One of the key problems for the diagnosis of the cracked tooth is the detection of the location of the surface crack. METHODS: This paper proposes an image-based method for the detection of the micro-crack in the simulated cracked tooth. A homemade three-axis motion platform mounted with a telecentric lens was built as an image acquisition system to observe the surface of the simulated cracked tooth, which was under compression with a magnitude of the masticatory force. By using digital image correlation (DIC), the deformation map for the crown surface of the cracked tooth was calculated. Through image analysis, the micro-crack was quantitatively visualized and characterized. RESULTS: The skeleton of the crack path was successfully extracted from the image of the principal strain field, which was further verified by the image from micro-CT. Based on crack kinematics, the crack opening displacement was quantitatively calculated to be 2-10 µm under the normal mastication stress, which was in good agreement with the value reported in the literature. CONCLUSIONS: The crack on the surface of the simulated cracked tooth could be detected based on the proposed DIC-based method. The proposed method may provide a new solution for the rapid clinical diagnosis of cracked teeth and the calculated crack information would be helpful for the subsequent clinical treatment of cracked teeth.
Subject(s)
Cracked Tooth Syndrome , Tooth Fractures , Tooth , Cracked Tooth Syndrome/diagnosis , Crowns , Humans , X-Ray MicrotomographyABSTRACT
Origami has played an increasingly central role in designing a broad range of novel structures due to its simple concept and its lightweight and extraordinary mechanical properties. Nonetheless, most of the research focuses on mechanical responses by using homogeneous materials and limited studies involving buckling loads. In this study, we have designed a carbon fiber reinforced plastic (CFRP) origami metamaterial based on the classical Miura sheet and composite material. The finite element (FE) modelling process's accuracy is first proved by utilizing a CFRP plate that has an analytical solution of the buckling load. Based on the validated FE modelling process, we then thoroughly study the buckling resistance ability of the proposed CFRP origami metamaterial numerically by varying the folding angle, layer order, and material properties, finding that the buckling loads can be tuned to as large as approximately 2.5 times for mode 5 by altering the folding angle from 10° to 130°. With the identical rate of increase, the shear modulus has a more significant influence on the buckling load than Young's modulus. Outcomes reported reveal that tunable buckling loads can be achieved in two ways, i.e., origami technique and the CFRP material with fruitful design freedoms. This study provides an easy way of merely adjusting and controlling the buckling load of lightweight structures for practical engineering.
ABSTRACT
Carbon nanotube-based conductive polymer composites (CPC) showed great potentials for self-sensing and in situ structural health monitoring systems. Prediction of the long-term performance for such materials would be a meaningful topic for engineering design. In this work, the changing behavior of the long-term resistance of a multi-walled carbon nanotubes/epoxy resin composite gasket was studied under different temperature and loading conditions. Glass transition strongly influenced the resistance behavior of the composite during the thermal creep process. Similar to classical Kelvin-Voigt creep model, a model considering both the destruction and recovery processes of the conductive network inside the CPC was established. The long-term resistance variation can be predicted based on the model, and the results provided here may serve as a useful guide for further design of smart engineering structural health monitoring systems.
