ABSTRACT
Sweat collection and real time monitoring of sweat rate play essential roles in physiology monitoring and assessment of an athlete's performance during exercise. In this paper, we report a micropump for sweat simulant collection based on the capillary-evaporation effect. An electrochemical sensor is integrated into the micropump, which monitors the flow rate in real-time by detecting the current using three electrodes. The evaporation rate from micropore array, equivalent to the sweat rate, was theoretically and numerically investigated. The designed micropump yields the maximum collection rate as high as 0.235 µ L/min. In addition, the collection capability of the micropump was validated experimentally; the flow rate through the microchannel was further detected in real-time with the electrochemical sensor. The experimental maximum collection rate showed good consistency with the theoretical data. Our proposed device shows the potential for sweat collection and real-time monitoring of sweat rate, which is a promising candidate for being a wearable platform for real-time physiology and performance monitoring during exercise.
ABSTRACT
The single-crystal n-type and p-type ZnO nanowires (NWs) were synthesized via a chemical vapor deposition method, where phosphorus pentoxide was used as the dopant source. The electrical and photoluminescence studies reveal that phosphorus-doped ZnO NWs (ZnO:P NWs) can be changed from n-type to p-type with increasing P concentration. Furthermore, we report for the first time the formation of an intramolecular p-n homojunction in a single ZnO:P NW. The p-n junction diode has a high on/off current ratio of 2.5 x 10(3) and a low forward turn-on voltage of approximately 1.37 V. Finally, the photoresponse properties of the diode were investigated under UV (325 nm) excitation in air at room temperature. The high photocurrent/dark current ratio (3.2 x 10(4)) reveals that the diode has a potential as extreme sensitive UV photodetectors.
