Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 16 de 16
Filter
Add more filters










Publication year range
1.
Waste Manag ; 152: 48-58, 2022 Oct.
Article in English | MEDLINE | ID: mdl-35973327

ABSTRACT

Microbial chain elongation is a newly developed carboxylate platform-based bioprocess, which often encounters high salinity stress due to saline feedstock and pH adjustment. In this study, we systematically investigated the effects of salt types (Na+, K+, and NH4+), dosage, and salinity acclimation on microbial chain elongation, and identified the microbial community by high throughput 16S rRNA gene sequencing. The results showed that a high level of Na+ and NH4+ (12.5 g/L of cations) exerted seriously inhibitory effects without chain elongating activity, while K+ had the slightest inhibition only with a little longer lag phase and lower products yield. The chain elongating products yields and the selectivity of caproate decreased with the increasing Na+ concentration, and 8.6 g/L of Na+ was found to be the threshold value for un-acclimated inoculum used for chain elongation. The acclimation to high saline conditions greatly promoted the consumption of acetate and ethanol with a shorter lag phase, and recovered a robust elongating activity for butyrate production. Furthermore, the high throughput 16S rRNA gene sequencing analysis results indicated that six genera, such as Clostridium IV and Clostridium sensu stricto, closely relating chain elongation process were depressed by high salinity, and the salinity acclimation helped to enrich the functional microbes. These findings could provide useful information for engineering microbial chain elongation process under saline conditions.


Subject(s)
Acetates , Ethanol , Acclimatization , Anaerobiosis , Bioreactors , Fermentation , RNA, Ribosomal, 16S
2.
J Environ Manage ; 301: 113856, 2022 Jan 01.
Article in English | MEDLINE | ID: mdl-34626948

ABSTRACT

The conventional sintering process of municipal solid waste incineration (MSWI) fly ash is always energy intensive. The process forms a cracked structure because of the difficulty in forming the liquid phase to enhance the mass transfer process. Therefore, exploring a new disposal method to simultaneously decrease the sintering temperature and improve the mechanical and heavy metal leaching properties of sintered samples is necessary. In this study, a pressure-assisted sintering treatment was introduced to dispose fly ash by varying the chemical composition and mechanical pressure at relatively low temperatures (300-500 °C). The results revealed that the compressive strength of treated samples increased with the CaO/SiO2 molar ratio increasing from 0.5 to 1.0, and a maximum value of 238.28 ± 8.50 MPa was obtained. The heavy metal leaching concentration results demonstrated a low risk of contamination in the treated samples. Microstructure analyses suggested that the densification process was enhanced with increased mechanical pressure, and the formed calcium silicates and aluminosilicates positively affected the compressive strength. Moreover, smaller crystal lattices were observed during aggregation formation, suggesting the restraint of anomalous crystal growth, which accelerated the densification process and increased the compressive strength. Moreover, the mass transfer process during the pressure-assisted sintering process was enhanced compared with the conventional thermal process, which was reflected by the transformation of elements from homogeneous to heterogeneous distribution. Therefore, the improved mechanical properties and leaching behavior of heavy metals were attributed to the densified microstructure, formation of new minerals, and enhanced driving force during the pressure-assisted sintering process. These findings suggest that pressure-assisted sintering is a promising method for maximizing the reutilization and minimizing the energy consumption simultaneously to dispose fly ash.


Subject(s)
Metals, Heavy , Refuse Disposal , Carbon , Coal Ash , Incineration , Metals, Heavy/analysis , Particulate Matter , Silicon Dioxide , Solid Waste/analysis
3.
Bioresour Technol ; 341: 125752, 2021 Dec.
Article in English | MEDLINE | ID: mdl-34419878

ABSTRACT

Integrating hydrothermal carbonization (HTC) and anaerobic digestion for biorefinery-oriented full utilization of wet organic wastes is a promising emerging technology. The objectives of this study were to identify the potential inhibitory substances, evaluate the biomethane potential of mixed and aqueous products and explore process intensifying strategies. The results indicated that the high HTC temperature of 240 °C resulted in a significantly low methane yield of 60 ± 5 mL/g COD and a high Short chain fatty acid (SCFAs) accumulation of 4174 ± 76 mg/L. GC-MS analysis showed that the contents of inhibitory pyrazines, pyridines and ketones in aqueous fraction at 240 °C substantially increased from 13.14%, 0.4%, 0.55% at 180 °C to 23.34%, 2.89%, 5.13%, respectively. When the aqueous products obtained from 240 °C-HTC was supplemented or pretreated by carbonaceous material, the methane yields were greatly improved and increased to 1.3-fold and 1.8-fold, respectively. These finding could provide some valuable technical information for HTC based biorefinery of organic waste.


Subject(s)
Carbon , Methane , Anaerobiosis , Temperature , Water
4.
Waste Manag ; 134: 21-31, 2021 Oct.
Article in English | MEDLINE | ID: mdl-34403993

ABSTRACT

Municipal solid waste incineration (MSWI) fly ash disposal is an urgent task with some technical bottlenecks. In this study, a novel pressure-assisted sintering method was employed to treat the MSWI fly ash. A series of pressure-assisted sintering experiments were carried out by varying mechanical pressures and sintering temperatures, and their properties of compressive strength, density and heavy metals leaching behavior were determined to screen out the optimal conditions. Instrumental analysis of XRF, SEM, XRD and TEM-EDX and calculation kinetics were conducted to explore the enhancement mechanism of pressure-assisted sintering. With the help of mechanical pressure, a high-strength ceramic product was produced from MSWI fly ash sintered at a low temperature (400 °C), which never occurred in the conventional low-temperature sintering process. Maximum compressive strength of 218.30 ± 4.08 MPa was obtained at 400 °C and 100 MPa, which was much higher than conventional construction materials of brick and cement. In addition, the leaching concentrations of heavy metals obtained from pressure-assisted sintering process were lower than the standard limitation. The SEM and XRD results revealed that the increased mechanical properties and the decreased heavy metals leaching concentration were mainly attributed to the increased density and crystalline degree. The kinetics calculation results indicated that the sintering activation energy was much lower than the sintering process without pressure, suggesting surface diffusion and grain boundary diffusion were main sintering mechanisms in the pressure-assisted sintering process. These findings proved that pressure-assisted sintering could be a promising method to treat fly ash together with producing high-value building materials.


Subject(s)
Metals, Heavy , Refuse Disposal , Carbon , Coal Ash , Incineration , Metals, Heavy/analysis , Particulate Matter , Solid Waste/analysis , Temperature
5.
Waste Manag ; 126: 585-596, 2021 May 01.
Article in English | MEDLINE | ID: mdl-33862510

ABSTRACT

Polylactic acid (PLA) plastic is becoming a popular alternative to traditional petroleum-based plastics, but the biodegradability in engineered biological system is still a matter of concern. In this study, the biodegradability of PLA plastic at mesophilic and thermophilic AD were investigated, and a hydrothermal pretreatment was proposed to enhance the hydrolysis of PLA plastic and subsequent biomethanization. For raw PLA plastic, the biodegradation results indicated that PLA was hardly biodegraded at mesophilic conditions (only 50.5 ± 0.5 mL/g VS after 146 days). Although it was converted into biogas at thermophilic conditions after long incubation period (442.6 ± 1.1 mL/g VS), the long digestion time (T90 95.8 days) was destined to be infeasible for practical application. In contrast, hydrothermal pretreatment significantly enhanced the hydrolysis rates of PLA plastic in AD process from 0.001 day-1 for raw PLA plastic to 0.004-0.111 day-1. By balancing biogas production efficiency, energy and reagent cost, the conditions of 200 °C, 10 min and no alkali addition were recommended for hydrothermal pretreatment of waste PLA plastic in practice. At the optimized hydrothermal pretreatment conditions, 460.1 ± 25.0 mL/g VS was achieved in less than 30 days, which was comparable for AD of food waste (FW). Furthermore, LC-QEMS analysis proved that cleavages of ester bonds in PLA and its reaction with water molecule was the mechanism of triggering the hydrothermally decomposition of PLA. These results suggested the PLA-plastic waste co-mingled with OFMSW could be efficiently biomethanized into biogas by involving a mild hydrothermal pretreatment in practical application.


Subject(s)
Refuse Disposal , Anaerobiosis , Biofuels , Bioreactors , Food , Kinetics , Methane , Plastics , Polyesters
6.
J Environ Manage ; 281: 111837, 2021 Mar 01.
Article in English | MEDLINE | ID: mdl-33418387

ABSTRACT

The metal mineral has a complex influence on the thermal decomposition of biomass due to the sophisticated structure of biomass and parallel reactions. Therefore, the influencing mechanisms of metal minerals on biomass decomposition kinetic expressions needed to be thoroughly investigated. In this study, the decomposition of the three major components of biomass was considered separately. The iso-conversional method and integral master-plots method based on thermogravimetry were firstly introduced to explore the kinetic model changes after the introduction of zinc mineral. The thermogravimetric results showed that the presence of zinc mineral had discrepant influences on different biomass components, demoting the fragmentation of hemicellulose while promoting cellulose degradation. In the kinetic analysis, the presence of zinc mineral, the activation energy of three pseudo-components (91.90, 184.64 and 210.91 kJ mol-1) increased to 178.84, 299.05, and 359.45 kJ mol-1, respectively. The kinetic models were altered from 2.0-order reaction (F2.0) for hemicellulose, random nucleation (A1.8) for cellulose, and 2.3-order reaction (F2.3) for lignin to F2.8, F3.0, and F3.2, respectively. This indicated that the zinc mineral was beneficial to the occurrence of multimolecular repolymerization of the primary degradation products. In products analysis, the increment of biochar yields and the C4-C5 products of cellulose (especially furfural) in metal-polluted biomass pyrolysis were detected, which confirmed the simulated reaction mechanisms. The obtained results are expected to provide a mechanism reference to practical applications of metal-contaminated biomass.


Subject(s)
Pyrolysis , Zea mays , Biomass , Kinetics , Minerals , Thermogravimetry , Zinc
7.
Chemosphere ; 264(Pt 1): 128406, 2021 Feb.
Article in English | MEDLINE | ID: mdl-33010627

ABSTRACT

Thermal behavior of municipal solid waste incineration (MSWI) fly ash is extremely complicated due to the simultaneously occurred reactive processes and the products with different chemical compositions, therefore, the investigation of chemical compounds transition behavior and mechanism during the integrated thermal process is of great significance. In this study, the macro-thermal treatment of fly ash and thermo-gravimetric analysis via non-isothermal methods were carried out and Málek method was firstly introduced to explore the mechanism of multi-step reaction for fly ash. The mineral transition results suggested that the halite, sylvite in the raw fly ash transformed to more complex crystals in treated samples, such as chlorellestadite, polyhalite and enstatite during the thermal process. And the heavy metals leaching concentration decreased with the temperature increased from 300 °C to 1200 °C, and the leaching values were lower than the standard limitation after thermal treatment. In addition, three major steps of fly ash reactions (300-380 °C, 650-750 °C and 890-1130 °C) during the thermal process were observed and expressed by first order reaction for the first step, three-dimensional diffusion for the second step and three dimensions of limiting surface reaction between both phases for the third step, respectively. The kinetic study revealed that the mineral transition process was in well accordance with the simulated reaction mechanism during the thermal treatment. The obtained results are expected to provide the research basis for studying detailed thermal characteristics and reaction mechanism during the thermal treatment of MSWI fly ash.


Subject(s)
Metals, Heavy , Refuse Disposal , Carbon , Coal Ash , Incineration , Metals, Heavy/analysis , Particulate Matter , Solid Waste/analysis
8.
Sci Total Environ ; 752: 141733, 2021 Jan 15.
Article in English | MEDLINE | ID: mdl-32896787

ABSTRACT

Antibacterial properties of norfloxacin (NOR) could cause adverse impact on engineered biological process. In this study, the objective was to investigate the inhibitory effects of NOR on anaerobic digestion focusing on the recoverability and microbial community changes. The effects of different concentrations of NOR on anaerobic digestion were studied with three continuous feed cycles. Results showed that NOR seriously inhibited the methane production with an 50% inhibitory concentration (IC50) of 0.41 mM. In addition, with extending of exposure time, inhibitory effect increasingly strengthened and the IC50 values decreased to 0.16 mM and 0.07 mM in the second and third feeding cycle, respectively. However, when the inhibitor in supernatant was removed, the performance recovered and the relative methane yield increased by 9 times from 25.38 mL/g VS to 257.05 mL/g VS. The transformation of NOR showed that the degradation of NOR in the anaerobic digestion was difficult and the recovery was due to the removal of NOR. The microbial analysis revealed that the inhibition of NOR on bacteria of Candidatus_Cloacimonas, Petrimonas, Ercella, Sphaerochaeta and hydrogenotrophic methanogens of Methanoculleus and Methanobacterium was recoverable when NOR was removed. However, it was irreversible for acetoclastic methanogen of Methanosaeta. These findings provided comprehensive understanding on the characteristics of NOR inhibition and also provided feasible strategy to recover the NOR inhibited anaerobic digestion.


Subject(s)
Microbiota , Norfloxacin , Anaerobiosis , Bioreactors , Methane , Sewage
9.
Bioresour Technol ; 313: 123634, 2020 Oct.
Article in English | MEDLINE | ID: mdl-32570076

ABSTRACT

This study aimed at evaluating the valorization of a typical yard waste, phoenix tree leaf (PTL), through mild alkali pretreatment followed by anaerobic digestion (AD). To this end, L9 Taguchi orthogonal biochemical methane potential (BMP) tests and semi-continuous AD experiments were conducted to examine the optimum pretreatment condition and the long term effect of alkali pretreatment on AD. The community structure evolutions were analyzed by high throughput 16S rRNA gene pyrosequencing. The results indicated that alkali pretreatment was effective on decrystallization and releasing more surface of PTL for enzyme attacking. The methane yield was positively correlated with lignin removal (R2=0.8242). In semi-continuous mode, 151.5±7.9 mL/g VS of the methane yield was obtained for alkali pretreated PTL, which was 80% higher than that of untreated one. Microbial community analysis indicated that alkali pretreatment led to a higher abundance of dominated bacteria (Bacteroidetes and Clostridia) and archaea of Methanosaeta.


Subject(s)
Alkalies , Trees , Anaerobiosis , Biofuels , Methane , RNA, Ribosomal, 16S
10.
Sci Total Environ ; 704: 135429, 2020 Feb 20.
Article in English | MEDLINE | ID: mdl-31837868

ABSTRACT

Anaerobic co-digestion (co-AD) could be a more sustainable waste management solution by sharing the existed anaerobic digestion (AD) facilities and generating more biogas energy. In this study, a series of co-AD of different urban derived organic wastes (sewage sludge-SS, food waste-FW, yard waste-YW) were conducted in a semi-continuous mode, and the corresponding dynamic evolutions of microbial community structure were followed by using real-time quantitative polymerase chain reaction (qPCR). As for co-AD of two feedstocks, introduction of SS (25%, VS basis) in FW significantly improved the process stability and archaea/total microbe ratio (from 0.4% to 17.1%), which might be due to the regulating effect of abundant trace metals in SS; co-AD of SS (25%, VS basis) with YW improved the methane yield by 2.04 times than AD of YW only together with higher methane contents (57.4 ± 1.3% vs. 50.9 ± 2.2%); in co-AD of FW and YW, synergistic effects in terms of increased methane production (3.4-19.1%) were observed, which was correlated with more robust growth of both bacteria and archaea. As for co-AD of three feedstocks, high methane yields of 314.9 ± 17.1 mL/g VS were achieved with a reliable stability. These findings could provide some fundamental and technical information for the co-treatment of urban derived organic wastes in centralized AD facilities.


Subject(s)
Biofuels , Refuse Disposal/methods , Anaerobiosis , Archaea , Bacteria , Food , Methane , Microbiota , Waste Management , Waste Products
11.
Bioresour Technol ; 297: 122382, 2020 Feb.
Article in English | MEDLINE | ID: mdl-31776103

ABSTRACT

The objective of this study was to evaluate the antagonistic effect of emerging pollutants of zinc oxide nanoparticles (ZnO NPs) and sodium dodecyl sulfate (SDS) on anaerobic digestion and explore their potential mechanism. The results indicated that at a low inhibitory concentration of ZnO NPs (1.0 mM), the practical co-inhibition was decreased by 24% and 18% in co-existence of 50 mg/L SDS and 300 mg/L SDS, respectively. More importantly, the co-existence of 300 mg/L SDS greatly enhanced methanogenesis of organics in seriously inhibited case (2.0 mM of ZnO NPs). The microbial community analysis showed that co-existed SDS enhanced the growth of Methanothrix, Methanosarcina and Methanobacterium. The antagonistic enhancement could be attributed to the net charge reversal, partially agglomeration of ZnO NPs and/or reduction of Zn2+ release in the presence of SDS. These findings could provide useful information for evaluating the co-inhibition of SDS and ZnO NPs on biological processes.


Subject(s)
Metal Nanoparticles , Microbiota , Nanoparticles , Zinc Oxide , Anaerobiosis , Surface-Active Agents
12.
Environ Pollut ; 254(Pt B): 113005, 2019 Nov.
Article in English | MEDLINE | ID: mdl-31473389

ABSTRACT

Norfloxacin (NOR) is a persistent organic pollutant and can be effectively removed from effluent by adsorption of biochar. However, the presence of other emerging contaminants, such as surfactants, will potentially alter adsorption performance of norfloxacin by biochar and the molecular-scale mechanisms of the interaction between surfactants and biochar remain poorly understood. In this study, adsorption of norfloxacin on magnetic biochar prepared with iron-containing furfural residue (FRMB) in the presence or absence of anionic surfactants was investigated. The adsorption of NOR was significantly affected by the initial pH and anionic surfactants-sodium dodecyl sulfate (SDS) and sodium dodecyl benzene sulfonate (SDBS). In the presence of SDS and SDBS, the maximum sorption capacities of NOR were 2.33 and 1.97 times higher than that in the absence of surfactants, reached to 698.6 mg g-1 and 589.9 mg g-1, respectively. The optimal pH condition which was 4 indicated that electrostatic adsorption played a decisive role in the adsorption process after introduction of SDS/SDBS. The adsorption data were fitted well by the Elovich model and Freundlich model at the optimal conditions in which both SDS and SDBS were hemimicelle (0.8 mM SDS or 0.4 mM SDBS), indicating surface heterogeneity of FRMB and the adsorption mechanism was related to the assembly of surfactants on biochar. FTIR results showed that FRMB and SDS/SDBS interacted through hydrophobic action, and more complex or aggregates were formed between the NOR and biochar/SDS/SDBS. This work highlights the synergistic enhancement effects of tested surfactants on the removal of NOR by magnetic biochar from aqueous systems.


Subject(s)
Anti-Bacterial Agents/chemistry , Charcoal/chemistry , Drug Residues/chemistry , Magnetics/methods , Norfloxacin/chemistry , Surface-Active Agents/chemistry , Water Purification/methods , Adsorption , Anti-Bacterial Agents/isolation & purification , Benzenesulfonates/chemistry , Drug Residues/isolation & purification , Magnetics/instrumentation , Norfloxacin/isolation & purification , Sodium Dodecyl Sulfate/chemistry , Water Pollutants, Chemical/chemistry , Water Purification/instrumentation
13.
Sci Total Environ ; 681: 18-27, 2019 Sep 01.
Article in English | MEDLINE | ID: mdl-31102814

ABSTRACT

As a prerequisite additive, bulking agent played an essential role on organic wastes biodrying by affecting the organics degradation and microbial consortia. In this study, a series of experiments were conducted to explore the relationships among the type of bulking agents, organics degradation and microbial community evolution. In line with the excellent physiochemical properties, corncob was found to be more desirable for biodrying with more water removal (62.13% vs. 53.70% for sawdust and 51.72% for straw) and higher energy efficiency. Furthermore, different bulking agents showed different biodegradability and affected co-existed organics degradation. In detail, corncob upgraded the amylase and lipase activities, thus promoting the degradation of readily degradable carbohydrates and lipids in feedstocks, which accounted for >60% of the bio-heat sources for water evaporation. In addition, pyrosequencing analysis revealed that Bacillus (>50%) and Ochrobactrum (>40%) were the dominant genera in thermophilic and cooling phases, with degradation capacities of readily degradable substrate and lignocellulose, respectively. And the pathogens, e.g., E. coli and K. pneumonia, were seriously inhibited by high matrix temperatures in corncob trial. These results not only suggested the corncob was a promising bulking agent, but the potential microbial mechanisms for organics degradation were also revealed.


Subject(s)
Food , Waste Disposal, Fluid/methods , Biodegradation, Environmental , Escherichia coli , Hot Temperature , Lignin , Microbiota , Sewage , Water
14.
Waste Manag ; 89: 165-176, 2019 Apr 15.
Article in English | MEDLINE | ID: mdl-31079729

ABSTRACT

In this study, thermal assistance was employed in the cooling stage of conventional biodrying. The results indicated that thermal assistance greatly enhanced water removal with improved vapor-carrying capacity of air-flow, and rapidly decreased moisture contents (MCs) from 45.15% to 49.42% to 15.20-25.85% in 6 days, which were much lower than those of conventional biodrying (CB, 34.90-40.85%). More importantly, a synergistic enhancement of physical and biological effects was observed in thermally assisted biodrying (TB) in terms of stimulated enzymes activity and microbial metabolism (higher oxygen uptake rate and degradation coefficient k). Among the degraded organics, lignocellulose was noted to be important for bio-heat generation in cooling stages, especially for straw as bulking agent. Heat balance results suggested that small fractions of thermal heat (19.76-24.73%) were required to upgrade CB processes for water evaporation with higher energy efficiency. Based on economic viability analysis and with consideration of the further drying for CB products, thermally assisted biodrying presented more economic benefits with less investment and shorter payback period. This research provided an efficient engineering approach to upgrade the cooling stage of conventional biodrying with low external heat cost.


Subject(s)
Desiccation , Sewage , Biodegradation, Environmental , Hot Temperature , Water
15.
Waste Manag ; 80: 327-338, 2018 Oct.
Article in English | MEDLINE | ID: mdl-30455014

ABSTRACT

Recently, bio-drying is becoming a promising method to treat the slurry-type food waste together with recovering refused derived fuels (RDFs). In practice, however, conventional process frequently encountered low temperature and inefficient drying performance due to the low microbial activity and organics degradability. In order to improve bio-drying performance, in this study, an externally thermal assistant strategy was proposed to increase water evaporation and stimulate microbial degradability. Based on this idea, a series of experiments were conducted to establish, evaluate and optimize the thermally assisted bio-drying system. It was found that staged heating acclimation was an effective strategy to obtain a superior thermophilic inoculum with high metabolic activity and microbial consortia. In thermally assisted bio-drying process, an extremely high metabolic activity [cumulative OUR, 38.98 mg/(g TS·h)] was obtained, which was greatly higher than that of conventional bio-drying [19.74 mg/(g TS·h)]. Furthermore, thermally assisted bio-drying exhibited a high water-evaporation capacity as thermal drying (157.9 g vs. 147.8 g), which was 3-fold higher than conventional bio-drying. Heat balance calculation indicated that externally supplying a small fraction (12.94%) of thermal energy triggered conventional bio-drying, thus greatly promoting water removal with high energy utilization efficiency as conventional bio-drying (Qevapo 60.30% vs. 64.62%). In addition, the increased air-flow rates greatly accelerated water removal with high bio-energy efficiencies, especially at 0.8 L·min-1·kg-1. The drying effect after 4 days was close to that of 20 days in conventional bio-drying. This research suggests that thermally assisted bio-drying is a promising approach to upgrade conventional bio-drying with high efficiency and low energy cost.


Subject(s)
Desiccation , Water , Food , Hot Temperature
16.
Bioresour Technol ; 247: 103-115, 2018 Jan.
Article in English | MEDLINE | ID: mdl-28946083

ABSTRACT

Recently, extrusion press treatment shows some promising advantages for effectively separating of organic fraction of municipal solid waste (OFMSW) from the mixed MSW, which is critical for their following high-efficiency treatment. In this study, an extruded OFMSW obtained from a demonstrated MSW treatment plant was characterized, and submitted to a series of semi-continuous anaerobic experiments to examine its biodegradability and process stability. The results indicated that the extruded OFMSW was a desirable substrate with a high biochemical methane potential (BMP), balanced nutrients and reliable stability. For increasing organic loading rates (OLRs), feeding higher volatile solid (VS) contents in feedstock was much better than shortening the hydraulic retention times (HRTs), while excessively high contents caused a low biodegradability due to the mass transfer limitation. For energetics evaluation, a high electricity output of 129.19-156.37kWh/ton raw MSW was obtained, which was further improved by co-digestion with food waste.


Subject(s)
Bioreactors , Refuse Disposal , Anaerobiosis , Digestion , Methane , Solid Waste
SELECTION OF CITATIONS
SEARCH DETAIL
...