Benefits of the Hydrophobic Surface for CH3NH3PbI3 Crystalline Growth Towards Highly Efficient Inverted Perovskite Solar Cells.

In inverted perovskite solar cells (PSCs), high-quality perovskite film grown on hole-transporting material (HTM) with pinhole-free coverage and a large grain size is crucial for high efficiency. Here, we report on the growth of pinhole-free and large grain CH3NH3PbI3 crystals favored by a hydrophobic small molecular HTM, namely, 4,4'-Bis(4-(di-p-toyl)aminostyryl)biphenyl (TPASBP). The hydrophobic surface induced by TPASBP suppressed the density of the perovskite nuclei and heterogeneous nucleation, thus promoting the perovskite to grow into a dense and homogeneous film with a large grain size. The CH3NH3PbI3 deposited on the TPASBP exhibited better crystallization and a lower trap density than that on the hydrophilic surface of indium tin oxide (ITO), resulting in a significant reduction in carrier recombination. Combined with the efficient hole extraction ability of TPASBP, a high efficiency of 18.72% in the inverted PSCs fabricated on TPASBP was achieved.

Highly Efficient and Operational Stability Polymer Solar Cells Employing Nonhalogenated Solvents and Additives.

The power conversion efficiencies (PCEs) of potential polymer solar cells have been shown to rapidly exceed 15%. However, these high-performance devices are based on halogenated solvents that pose a significant hazard to the atmospheric environment and human beings. The use of nonhalogenated solvents makes the device less efficient because of its solubility issues. In this work, we report high-efficiency devices utilizing PffBT4T-2OD and [6,6]-phenyl C71 butyric acid methyl ester system from nonhalogenated solvents such as o-xylene ( o-XY) and 1-methylnaphthalene (Me) hydrocarbon solvent. When Me was used as the additive, the PCE of prepared devices improved from 1.83 to 10.13%, which is rather higher than that of the devices processed with traditional solvents combined with chlorobenzene and 1,8-diiodooctane (8.18%). Both atomic force microscopy and transmission electron microscopy confirmed that after nonhalogen solvents are treated, a more finely phase-separated dense morphology of active layers than after halogen solvents. At the same time, grazing incident wide-angle X-ray scattering patterns show that the combination of nonhalogenated solvents o-XY and Me ingeniously formed an ordered crystal and π-π stacking. Also, the stability of devices prepared from nonhalogenated solvents was significantly better than that of halogenated solvents under continuous illumination in the air without encapsulation.

Improving the Charge Carrier Transport and Suppressing Recombination of Soluble Squaraine-Based Solar Cells via Parallel-Like Structure.

Small molecule organic solar cells (SMOSCs) have attracted extensive attention in recent years. Squaraine (SQ) is a kind of small molecule material for potential use in high-efficiency devices, because of its high extinction coefficient and low-cost synthesis. However, the charge carrier mobility of SQ-based film is much lower than other effective materials, which leads to the pretty low fill factor (FF). In this study, we improve the performance of SQ derivative-based solar cells by incorporating PCDTBT into LQ-51/PC71BM host binary blend film. The incorporation of PCDTBT can not only increase the photon harvesting, but also provide an additional hole transport pathway. Through the charge carrier mobility and transient photovoltage measurement, we find that the hole mobility and charge carrier lifetime increase in the ternary system. Also, we carefully demonstrate that the charge carrier transport follows a parallel-like behavior.

An Azulene-Containing Low Bandgap Small Molecule for Organic Photovoltaics with High Open-Circuit Voltage.

A simple azulene-containing squaraine dye (AzUSQ) showing bandgap of 1.38 eV and hole mobility up to 1.25×10(-4)  cm(2) V(-1) s(-1) was synthesized. With its low bandgap, an organic photovoltaic (OPV) device based on it has been made that exhibits an impressive open-circuit voltages (Voc ) of 0.80 V. Hence, azulene might be a promising structural unit to construct OPV materials with simultaneous low bandgap, high hole mobility and high Voc .

Highly Efficient p-i-n Perovskite Solar Cells Utilizing Novel Low-Temperature Solution-Processed Hole Transport Materials with Linear π-Conjugated Structure.

Alternative low-temperature solution-processed hole-transporting materials (HTMs) without dopant are critical for highly efficient perovskite solar cells (PSCs). Here, two novel small molecule HTMs with linear π-conjugated structure, 4,4'-bis(4-(di-p-toyl)aminostyryl)biphenyl (TPASBP) and 1,4'-bis(4-(di-p-toyl)aminostyryl)benzene (TPASB), are applied as hole-transporting layer (HTL) by low-temperature (sub-100 °C) solution-processed method in p-i-n PSCs. Compared with standard poly(3,4-ethylenedioxythiophene): poly(styrenesulfonic acid) (PEDOT:PSS) HTL, both TPASBP and TPASB HTLs can promote the growth of perovskite (CH3 NH3 PbI3 ) film consisting of large grains and less grain boundaries. Furthermore, the hole extraction at HTL/CH3 NH3 PbI3 interface and the hole transport in HTL are also more efficient under the conditions of using TPASBP or TPASB as HTL. Hence, the photovoltaic performance of the PSCs is dramatically enhanced, leading to the high efficiencies of 17.4% and 17.6% for the PSCs using TPASBP and TPASB as HTL, respectively, which are ≈40% higher than that of the standard PSC using PEDOT:PSS HTL.

Revealing the Effect of Additives with Different Solubility on the Morphology and the Donor Crystalline Structures of Organic Solar Cells.

The impact of two kinds of additives, such as 1,8-octanedithiol (ODT), 1,8-diiodooctane (DIO), diphenylether (DPE), and 1-chloronaphthalene (CN), on the performance of poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-di(2-octyldodecyl)2,2';5',2″;5″,2‴-quaterthiophen-5,5‴-diyl)] (PffBT4T-2OD):[6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) based polymer solar cell are investigated. The polymer solar cells (PSCs) of PffBT4T-2OD:PC71BM by using CN show a more improved PCE of 10.23%. The solubility difference of PffBT4T-2OD in DIO and CN creates the fine transformation in phase separation and favorable nanoscale morphology. Grazing incidence X-ray diffraction (GIXRD) data clearly shows molecular stacking and orientation of the active layer. Interestingly, DIO and CN have different functions on the effect of the molecular orientation. These interesting studies provide important guidance to optimize and control complicated molecular orientations and nanoscale morphology of PffBT4T-2OD based thick films for the application in PSCs.

Improved performances of PCDTBT:PC71BM BHJ solar cells through incorporating small molecule donor.

We demonstrate bulk heterojunction (BHJ) organic photovoltaics (OPVs) with a power conversion efficiency (PCE) of 6.39% by incorporating a small molecular compound 2-[4-(N-butyl-N-phenylamino)-2,6-dihydroxyphenyl]-4-[(4-(N-butyl-N-phenylamino)-2,6-dihydroxyphenyl)-2,5-dien-1-ylidene]-3-oxocyclobut-1-en-1-olate (SQ-BP) as the additional donor material into a poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole-4,7-diyl-2,5-thiophenediyl] (PCDTBT):[6,6]-phenyl C71 butyric acid methyl ester (PC71BM) host binary blend. Incorporating SQ-BP into the PCDTBT:PC71BM host blend film increases the photon harvesting of a ternary photovoltaic device with a broad absorption spectrum from 300 nm to 750 nm, which results in an increased short-circuit current density (Jsc). In addition to efficient photon harvesting, Förster resonance energy transfer (FRET) between PCDTBT and SQ-BP is also the reason for the increase in Jsc. As a result, the PCE of ternary devices with 10 wt% SQ-BP is about 30% greater than that of PCDTBT:PC71BM-based binary OPVs.

Asymmetrical squaraines for high-performance small-molecule organic solar cells with a short circuit current of over 12 mA cm(-2).

An asymmetrical squaraine dye (Py-3) with its two electron-donating aryl groups directly linked to the electron-withdrawing squaric acid core possesses an ideal bandgap of 1.33 eV, together with an intense and broad absorption band in the range 550-950 nm. Hence, the resulting solution-processed solar cells display an impressive Jsc of 12.03 mA cm(-2) and a PCE of 4.35%.

A low bandgap asymmetrical squaraine for high-performance solution-processed small molecule organic solar cells.

A novel asymmetrical squaraine ASQ-5 bearing indoline as an end capper exhibits a low bandgap of 1.43 eV and a broad absorption band in the Vis-NIR region of 550-850 nm in thin films, hence renders solution-processed organic solar cells with an impressive Jsc of up to 11.03 mA cm(-2) and an excellent PCE of 4.29%.