Gpbar-1/cAMP/PKA signaling mitigates macrophage-mediated acute cholestatic liver injury via antagonizing NLRP3-ASC inflammasome.

Acute cholestatic liver injury (ACLI) is a disease associated with bile duct obstruction that causes liver inflammation and apoptosis. Although G protein-coupled bile acid receptor1 (Gpbar-1) has diverse metabolic roles, its involvement in ACLI-associated immune activation remains unclear. Liver tissues and blood samples from 20 patients with ACLI and 20 healthy individuals were analyzed using biochemical tests, H&E staining, western blotting, and immunohistochemistry to verify liver damage and expression of Gpbar-1. The expression of Gpbar-1, cAMP/PKA signaling, and the NLRP3 inflammasome was tested in wild-type (WT) and Gpbar-1 knockdown (si-Gpbar-1) mice with ACLI induced by bile duct ligation (BDL) and in primary Kupffer cells (KCs) with or without Gpbar-1-siRNA. The results showed that total bile acids and Gpbar-1 expressions were elevated in patients with ACLI. Gpbar-1 knockdown significantly worsened BDL-induced acute hepatic damage, inflammation, and liver apoptosis in vivo. Knockdown of Gpbar-1 heightened KC sensitivity to lipopolysaccharide (LPS) stimulation. Gpbar-1 activation inhibited LPS-induced pro-inflammatory responses in normal KCs but not in Gpbar-1-knockdown KCs. Notably, NLRP3-ASC inflammasome expression was effectively enhanced by Gpbar-1 deficiency. Additionally, Gpbar-1 directly increased intracellular cAMP levels and PKA phosphorylation, thus disrupting the NLRP3-ASC inflammasome. The pro-inflammatory characteristic of Gpbar-1 deficiency was almost neutralized by the NLRP3 inhibitor CY-09. In vitro, M1 polarization was accelerated in LPS-stimulated Gpbar-1-knockdown KCs. Therapeutically, Gpbar-1 deficiency exacerbated BDL-induced ACLI, which could be rescued by inhibition of the NLRP3-ASC inflammasome. Our study reveal that Gpbar-1 may act as a novel immune-mediated regulator of ACLI by inhibiting the NLRP3-ASC inflammasome.

Multidimensional Electrochemistry Decodes the Operando Mechanism of Hydrogen Oxidation.

Being an efficient approach to the utilization of hydrogen energy, the hydrogen oxidation reaction (HOR) is of particular significance in the current carbon-neutrality time. Yet the mechanistic picture of the HOR is still blurred, mostly because the elemental steps of this reaction are rapid and highly entangled, especially when deviating from the thermodynamic equilibrium state. Here we report a strategy for decoding the HOR mechanism under operando conditions. In addition to the wide-potential-range I-V curves obtained using gas diffusion electrodes, we have applied the AC impedance spectroscopy to provide independent and complementary kinetic information. Combining multidimensional data sources has enabled us to fit, in mathematical rigor, the core kinetic parameter set in a 5-D data space. The reaction rate of the three elemental steps (Tafel, Heyrovsky, and Volmer reactions), as a function of the overpotential, can thus be distilled individually. Such an undocumented kinetic picture unravels, in detail, how the HOR is controlled by the elemental steps on polarization. For instance, at low polarization region, the Heyrovsky reaction is relatively slow and can be ignored; but at high polarization region, the Heyrovsky reaction will surpass the Tafel reaction. Additionally, the Volmer reaction has been the fastest within overpotentials of interest. Our findings not only offer a better understanding of the HOR mechanism, but also lay the foundation for the development of improved hydrogen energy utilization systems.

Long-term toxicity assessment of antibiotics against Vibrio fischeri: Test method optimization and mixture toxicity prediction.

The current luminescent bacteria test for acute toxicity with short contact time was invalid for antibiotics, and the non-uniformed contact times reported in the literature for long-term toxicity assessment led to incomparable results. Herein, a representative long-term toxicity assessment method was established which unified the contact time of antibiotics and Vibrio fischeri within the bioluminescence increasing period (i.e. 10-100% maximum luminescence) of control samples. The effects of excitation and detoxification of antibiotics such as ß-lactams were discovered. Half maximal inhibitory concentration (IC50) of toxic antibiotics (0.00069-0.061 mmol/L) obtained by this method was 2-3 orders of magnitude lower than acute test, quantifying the underestimated toxicity. As antibiotics exist in natural water as mixtures, an equivalent concentration addition (ECA) model was built to predict mixture toxicity based on physical mechanism rather than mathematical method, which showed great fitting results (R2 = 0.94). Furthermore, interaction among antibiotics was investigated. Antibiotics acting during bacterial breeding period had strong synergistic inhibition (IC50 relative deviation from 0.1 to 0.6) such as macrolides and quinolones. Some antibiotics produced increasing synergistic inhibition during concentration accumulation, such as macrolides. The discharge of antibiotics with severe long-term toxicity and strong synergistic inhibition effect should be seriously restricted.

Effects of chemical oxygen demand and chloramphenicol on attached microalgae growth: Physicochemical properties and microscopic mass transfer in biofilm.

During the wastewater treatment and resource recovery process by attached microalgae, the chemical oxygen demand (COD) can cause biotic contamination in algal culture systems, which can be mitigated by adding an appropriate dosage of antibiotics. The transport of COD and additive antibiotic (chloramphenicol, CAP) in algal biofilms and their influence on algal physiology were studied. The results showed that COD (60 mg/L) affected key metabolic pathways, such as photosystem II and oxidative phosphorylation, improved biofilm autotrophic and heterotrophic metabolic intensities, increased nutrient demand, and promoted biomass accumulation by 55.9 %, which was the most suitable COD concentration for attached microalgae. CAP (5-10 mg/L) effectively stimulated photosynthetic pigment accumulation and nutrient utilization in pelagic microalgal cells. In conclusion, controlling the COD concentration (approximately 60 mg/L) in the medium and adding the appropriate CAP concentration (5-10 mg/L) are conducive to improving attached microalgal biomass production and resource recovery potential from wastewater.

In Situ Rapid-Formation Sprayable Hydrogels for Challenging Tissue Injury Management.

Rapid-acting, convenient, and broadly applicable medical materials are in high demand for the treatment of extensive and intricate tissue injuries in extremely medical scarcity environment, such as battlefields, wilderness, and traffic accidents. Conventional biomaterials fail to meet all the high criteria simultaneously for emergency management. Here, a multifunctional hydrogel system capable of rapid gelation and in situ spraying, addressing clinical challenges related to hemostasis, barrier establishment, support, and subsequent therapeutic treatment of irregular, complex, and urgent injured tissues, is designed. This hydrogel can be fast formed in less than 0.5 s under ultraviolet initiation. The precursor maintains an impressively low viscosity of 0.018 Pa s, while the hydrogel demonstrates a storage modulus of 0.65 MPa, achieving the delicate balance between sprayable fluidity and the mechanical strength requirements in practice, allowing flexible customization of the hydrogel system for differentiated handling and treatment of various tissues. Notably, the interactions between the component of this hydrogel and the cell surface protein confer upon its inherently bioactive functionalities such as osteogenesis, anti-inflammation, and angiogenesis. This research endeavors to provide new insights and designs into emergency management and complex tissue injuries treatment.

Implanting oxophilic metal in PtRu nanowires for hydrogen oxidation catalysis.

Bimetallic PtRu are promising electrocatalysts for hydrogen oxidation reaction in anion exchange membrane fuel cell, where the activity and stability are still unsatisfying. Here, PtRu nanowires were implanted with a series of oxophilic metal atoms (named as i-M-PR), significantly enhancing alkaline hydrogen oxidation reaction (HOR) activity and stability. With the dual doping of In and Zn atoms, the i-ZnIn-PR/C shows mass activity of 10.2 A mgPt+Ru-1 at 50 mV, largely surpassing that of commercial Pt/C (0.27 A mgPt-1) and PtRu/C (1.24 A mgPt+Ru-1). More importantly, the peak power density and specific power density are as high as 1.84 W cm-2 and 18.4 W mgPt+Ru-1 with a low loading (0.1 mg cm-2) anion exchange membrane fuel cell. Advanced experimental characterizations and theoretical calculations collectively suggest that dual doping with In and Zn atoms optimizes the binding strengths of intermediates and promotes CO oxidation, enhancing the HOR performances. This work deepens the understanding of developing novel alloy catalysts, which will attract immediate interest in materials, chemistry, energy and beyond.

Celebrating the 130th anniversary of Wuhan University.

Lin Zhuang, Qiu Wang, Aiwen Lei and Qianghui Zhou introduce the Chemical Science and Green Chemistry joint themed collection celebrating the 130th Anniversary of Wuhan University.

The lncRNA TRG-AS1 promotes the growth of colorectal cancer cells through the regulation of P2RY10/GNA13.

BACKGROUND: The lncRNA TRG-AS1 and its co-expressed gene P2RY10 are important for colorectal cancer (CRC) occurrence and development. The purpose of our research was to explore the roles of TRG-AS1 and P2RY10 in CRC progression. METHODS: The abundance of TRG-AS1 and P2RY10 in CRC cell lines (HT-29 and LoVo) and normal colon cells FHC was determined and difference between CRC cells and normal cells was compared. LoVo cells were transfected with si-TRG-AS1 and si-P2RY10 constructs. Subsequently, the viability, colony formation, and migration of the transfected cells were analyzed using cell counting kit-8, clonogenicity, and scratch-wound/Transwell® assays, respectively. Cells overexpressing GNA13 were used to further explore the relationship between TRG-AS1 and P2RY10 along with their downstream functions. Finally, nude mice were injected with different transfected cell types to observe tumor formation in vivo. RESULTS: TRG-AS1 and P2RY10 were significantly upregulated in HT-29 and LoVo compared to FHC cells. TRG-AS1 knockdown and P2RY10 silencing suppressed the viability, colony formation, and migration of LoVo cells. TRG-AS1 knockdown downregulated the expression of P2RY10, GNA12, and GNA13, while P2RY10 silencing downregulated the expression of TRG-AS1, GNA12, and GNA13. Additionally, GNA13 overexpression reversed the cell growth and gene expression changes in LoVo cells induced by TRG-AS1 knockdown or P2RY10 silencing. In vivo experiments revealed that CRC tumor growth was suppressed by TRG-AS1 knockdown and P2RY10 silencing. CONCLUSIONS: TRG-AS1 knockdown repressed the growth of HT-29 and LoVo by regulating P2RY10 and GNA13 expression.

Unsupervised machine learning reveals eigen reactivity of metal surfaces.

The reactivity of metal surfaces is a cornerstone concept in chemistry, as metals have long been used as catalysts to accelerate chemical reactions. Although fundamentally important, the reactivity of metal surfaces has hitherto not been explicitly defined. For example, in order to compare the activity of two metal surfaces, a particular probe adsorbate, such as O, H, or CO, has to be specified, as comparisons may vary from probe to probe. Here we report that the metal surfaces actually have their own intrinsic/eigen reactivity, independent of any probe adsorbate. By employing unsupervised machine learning algorithms, specifically, principal component analysis (PCA), two dominant eigenvectors emerged from the binding strength dataset formed by 10 commonly used probes on 48 typical metal surfaces. According to their chemical characteristics revealed by vector decomposition, these two eigenvectors can be defined as the covalent reactivity and the ionic reactivity, respectively. Whereas the ionic reactivity turns out to be related to the work function of the metal surface, the covalent reactivity cannot be indexed by simple physical properties, but appears to be roughly connected with the valence-electron number normalized density of states at the Fermi level. Our findings expose that the metal surface reactivity is essentially a two-dimensional vector rather than a scalar, opening new horizons for understanding interactions at the metal surface.

Metal-support interaction boosts the stability of Ni-based electrocatalysts for alkaline hydrogen oxidation.

Ni-based hydrogen oxidation reaction (HOR) electrocatalysts are promising anode materials for the anion exchange membrane fuel cells (AEMFCs), but their application is hindered by their inherent instability for practical operations. Here, we report a TiO2 supported Ni4Mo (Ni4Mo/TiO2) catalyst that can effectively catalyze HOR in alkaline electrolyte with a mass activity of 10.1 ± 0.9 A g-1Ni and remain active even up to 1.2 V. The Ni4Mo/TiO2 anode AEMFC delivers a peak power density of 520 mW cm-2 and durability at 400 mA cm-2 for nearly 100 h. The origin for the enhanced activity and stability is attributed to the down-shifted d band center, caused by the efficient charge transfer from TiO2 to Ni. The modulated electronic structure weakens the binding strength of oxygen species, rendering a high stability. The Ni4Mo/TiO2 has achieved greatly improved stability both in half cell and single AEMFC tests, and made a step forward for feasibility of efficient and durable AEMFCs.

Elastic and Conductive Cross-linked Anion Exchange Membranes Based on Polyphenylene Oxide and Poly(vinyl alcohol) for H2 -O2 Fuel Cells.

A series of cross-linked AEMs (c-DQPPO/PVA) are synthesized by using rigid polyphenylene oxide and flexible poly(vinyl alcohol) as the backbones. Dual cations are grafted on the PPO backbone to improve the ion exchange capacity (IEC), while glutaraldehyde is introduced to enhance compatibility and reduce swelling ratio of AEMs. In addition to the enhanced mechanical properties resulting from the rigid-flexible cross-linked network, c-DQPPO/PVA AEMs also exhibit impressive ionic conductivity, which can be attributed to their high IEC, good hydrophilicity of PVA, and well-defined micro-morphology. Additionally, due to confined dimension behavior and ordered micro-morphology, c-DQPPO/PVA AEMs demonstrate excellent chemical stability. Specifically, c-DQPPO/PVA-7.5 exhibits a wet-state tensile strength of 12.5 MPa and an elongation at break of 53.0 % at 25 °C. Its OH- conductivity and swelling degree at 80 °C are measured to be 125.7 mS cm-1 and 8.2 %, respectively, with an IEC of 3.05 mmol g-1 . After 30 days in a 1 M NaOH solution at 80 °C, c-DQPPO/PVA-7.5 experiences degradation rates of 12.8 % for tensile strength, 27.4 % for elongation at break, 14.7 % for IEC, and 19.2 % for ion conductivity. With its excellent properties, c-DQPPO/PVA-7.5 exhibits a peak power density of 0.751 W cm-2 at 60 °C in an H2 -O2 fuel cell.

Chemical physics of electrochemical energy materials.

Probing the chemistry and materials science of electrochemical energy materials is a central topic in both chemical physics and energy chemistry due to the increasingly important role of energy devices in the current and future energy system and industry. Especially, understanding the chemical physics of electrochemical energy materials is the key to enhance the performance of energy storage and conversion devices such as batteries, fuel cells, electrolyzers, and supercapacitors. This special topic focuses on the fundamental understanding of electrochemical energy applications, including electrochemistry fundamentals, structural dynamics and degradation mechanism of materials, optimization strategies for improving electrochemical performance of energy devices, and emerging simulation and characterization methods applied to advanced energy materials.

An alternative method of Bakri balloon placement for postpartum hemorrhage after vaginal delivery.

OBJECTIVES: We developed a new Bakri balloon tamponade (BBT) placement technique after vaginal delivery, which aimed to be faster without balloon slippage. This study compared the new method with standard placement of BBT in women with postpartum hemorrhage (PPH) after vaginal delivery. MATERIAL AND METHODS: This study was undertaken of women who underwent vaginal delivery at the obstetrics and gynecology departments of the Hospital of Chengdu University of Traditional Chinese Medicine, Sichuan Provincial Hospital for Women and Children, and Si Chuan JINXIN Women and Children Hospital between January 2014 and December 2020. Women who underwent BBT for PPH were grouped according to placement method into the old-BBT group and the new-BBT group. RESULTS: Of 20487 childbirths by vaginal delivery, 512 (2.50%) had PPH, 77 women underwent BBT (old-BBT n = 28, new-BBT n = 49). Background characteristics were similar except prothrombin time (PT, p < 0.01) and activated partial thromboplastin time (APTT, p < 0.004) were lower in the new-BBT group than the old-BBT group. The operation time was shorter in the new-BBT group (p < 0.001) with less bleeding (p < 0.003) and saline injection (p < 0.001). A balloon slippage was less likely (p < 0.008) and postoperative bleeding (p < 0.01), transfusion rate (p < 0.03), transfusion volume (p < 0.002), and hospital stay was lower in the new-BBT group (p < 0.015). Multivariate analysis suggested PT (OR = 0.039, 95% CI: 0.002-0.730, p < 0.030), international normalized ratio (OR = 8.244, 95% CI: 3.807-17.850, p < 0.009), and BBT method (OR = 5.200, 95% CI: 1.745-15.493, p < 0.003), were associated with requiring a blood transfusion. CONCLUSIONS: This method of BBT placement reduced operation time, balloon slippage, bleeding, and hospital stay in women with PPH after vaginal delivery.

Ionomer degradation in catalyst layers of anion exchange membrane fuel cells.

Anion exchange membrane fuel cells (AEMFCs) that operate at high pH, offer the advantage of enabling the use of abundant 3d-transition metal-based electrocatalysts. While they have shown remarkable improvement in performance, their long-term durability remains insufficient for practical applications with the alkaline polymer electrolytes (APEs) being the limiting factor. The stability of APEs is generally evaluated in concentrated alkaline solutions, which overlooks/oversimplifies the complex electrochemical environment of the catalyst layer in membrane electrode assembly (MEA) devices. Herein, we report a study of the degradation of the membrane and ionomer independently under realistic H2-air (CO2 free) fuel cell operation, using proton nuclear magnetic resonance (1H-NMR), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and X-ray photoelectron spectroscopy (XPS). While the membrane degradation was minimal after the AEMFC stability test, the ionomer in the catalyst layers degraded approximately 20% to 30% with the cathode being more severely affected than the anode. The ionomer degradation decreased the catalyst utilization and significantly increased the ionic resistance, leading to significant performance degradation in the AEMFC stability test. These findings emphasize the importance of ionomer stability and the need to consider the electrochemical environments of MEAs when evaluating the stability of APEs.

High-performance flower-like and biocompatible nickel-coated Fe3O4@SiO2 magnetic nanoparticles decorated on a graphene electrocatalyst for the oxygen evolution reaction.

The electrocatalytic oxygen evolution reaction (OER) plays a crucial role in renewable clean energy conversion technologies and has developed into an important direction in the field of advanced energy, becoming the focus of basic research and industrial development. Herein, we report the synthesis and application of flower-like nickel-coated Fe3O4@SiO2 magnetic nanoparticles decorated on a graphene electrocatalyst for the OER that exhibit high efficiency and robust durability. The catalysts were optimized using a rotating ring-disk electrode to test their oxygen evolution properties in 1.0 M KOH solution. Importantly, owing to the high specific surface area and conductivity of C3N4 and graphene, the as-synthesized Fe3O4@SiO2@NiO/graphene/C3N4 exhibits a small Tafel slope of 40.46 mV dec-1, low overpotential of 288 mV at 10 mA cm-2, and robust OER durability within a prolonged test period of 100 h. The cytotoxicity of Fe3O4@SiO2, Fe3O4@SiO2@NiO, and Fe3O4@SiO2@NiO/graphene/C3N4 was evaluated in HeLa and MC3T3-E1 cells, demonstrating that they are efficient and biocompatible catalysts for the OER. Owing to its excellent electrocatalytic efficiency and eco-friendliness, Fe3O4@SiO2@NiO/graphene/C3N4 has considerable potential as a new multifunctional composite for large-scale applications in catalysis, biology, medicine, and high-efficiency hydrogen production.

Dual-Role of Polyelectrolyte-Tethered Benzimidazolium Cation in Promoting CO2 /Pure Water Co-Electrolysis to Ethylene.

Electrochemical CO2 reduction reaction (CO2 RR), as a promising route to realize negative carbon emissions, is known to be strongly affected by electrolyte cations (i.e., cation effect). In contrast to the widely-studied alkali cations in liquid electrolytes, the effect of organic cations grafted on alkaline polyelectrolytes (APE) remains unexplored, although APE has already become an essential component of CO2 electrolyzers. Herein, by studying the organic cation effect on CO2 RR, we find that benzimidazolium cation (Beim+ ) significantly outperforms other commonly-used nitrogenous cations (R4 N+ ) in promoting C2+ (mainly C2 H4 ) production over copper electrode. Cyclic voltammetry and in situ spectroscopy studies reveal that the Beim+ can synergistically boost the CO2 to *CO conversion and reduce the proton supply at the electrocatalytic interface, thus facilitating the *CO dimerization toward C2+ formation. By utilizing the homemade APE ionomer, we further realize efficient C2 H4 production at an industrial-scale current density of 331 mA cm-2 from CO2 /pure water co-electrolysis, thanks to the dual-role of Beim+ in synergistic catalysis and ionic conduction. This study provides a new avenue to boost CO2 RR through the structural design of polyelectrolytes.

Preparation of SiO2@Au Nanoparticle Photonic Crystal Array as Surface-Enhanced Raman Scattering (SERS) Substrate.

Surface-enhanced Raman scattering technology plays a prominent role in spectroscopy. By introducing plasmonic metals and photonic crystals as a substrate, SERS signals can achieve further enhancement. However, the conventional doping preparation methods of these SERS substrates are insufficient in terms of metal-loading capacity and the coupling strength between plasmonic metals and photonic crystals, both of which reduce the SERS activity and reproducibility of SERS substrates. In this work, we report an approach combining spin-coating, surface modification, and in situ reduction methods. Using this approach, a photonic crystal array of SiO2@Au core-shell structure nanoparticles was prepared as a SERS substrate (SiO2@Au NP array). To study the SERS properties of these substrates, Rhodamine 6G was employed as the probe molecule. Compared with a Au-SiO2 NP array prepared using doping methods, the SiO2@Au NP array presented better SERS properties, and it reproduced the SERS spectra after one month. The detection limit of the Rhodamine 6G on SiO2@Au NP array reached 1 × 10-8 mol/L; furthermore, the relative standard deviation (9.82%) of reproducibility and the enhancement factor (1.51 × 106) were evaluated. Our approach provides a new potential option for the preparation of SERS substrates and offers a potential advantage in trace contaminant detection, and nondestructive testing.

Computer simulation of the structural properties of fatty-acid modified PAMAM dendrimers at pH 5 and 7.

In this work, we performed coarse-grained molecular dynamics (CGMD) simulations of G3, G4, and G5 polyamidoamine (PAMAM) dendrimers grafting with fatty acid (FTA) chains. The FTA chains of varying length and grafting densities (50% and 100% of surface terminals) correspond to pH 7 and 5, respectively. Our findings suggested that the structural properties of dendrimers were determined by dendrimer generation, polymerization degrees, and pH. With one exception, the size of the FTA grafting dendrimer shrank after fatty acid attachment. Because of the protonation of the dendrimer's interior amines at low pH, the FTA chains are distributed at the dendrimer's surface group. At pH 7, the FTA chains that have aggregated in the interior of the dendrimer cause chain crowding. Our research provided references on drug encapsulation and the lower toxicity of these hydrophobically modified nanoparticles.

Maternal and neonatal outcomes in women with twin pregnancies based on gestational weight gain: An updated systematic review and meta-analysis.

Objective: This updated systematic review and meta-analysis aimed to assess maternal and fetal outcomes of pregnancies based on the Institute of Medicine (IOM) guidelines of gestational weight gain (GWG). Methods: PubMED, SCOPUS, EMBASE and Web of Science were searched up to 30th July 2022. All studies evaluating maternal and/or neonatal outcomes of twin pregnancies based on the IOM guidelines of gestational weight gain were included. Results: Twenty two studies were included. Mothers with twin pregnancies experiencing inadequate GWG showed higher incidence of gestational diabetes with the risk ratio (RR) 1.22 95% CI (0.95,1.57), p=0.0005, i2= 69% and premature rupture of membrane (PROM) with RR 1.14 95% CI (0.99, 1.30), p=0.07; i2=0% that coincided with higher rates of preterm birth, low birth weight, small for gestational age (SGA) and admission to NICU in neonates. Mothers with excessive GWG had higher risk of developing gestational hypertension with RR 1.59 95% CI (1.22, 2.07), p=0.0006, i2=75% and extremely preterm delivery (<32 weeks). Conclusion: Within the limitations of this review, GWG was found to be a predictable risk factor for adverse maternal and neonatal outcomes of twin pregnancies.

Accelerating Gas Escape in Anion Exchange Membrane Water Electrolysis by Gas Diffusion Layers with Hierarchical Grid Gradients.

At high current densities, gas bubble escape is the critical factor affecting the mass transport and performance of the electrolyzer. For tight assembly water electrolysis technologies, the gas diffusion layer (GDL) between the catalyst layer (CL) and the flow field plate plays a critical role in gas bubble removal. Herein, we demonstrate that the electrolyzer's mass transport and performance can be significantly improved by simply manipulating the structure of the GDL. Combined with 3D printing technology, ordered nickel GDLs with straight-through pores and adjustable grid sizes are systematically studied. Using an in situ high-speed camera, the gas bubble releasing size and resident time have been observed and analyzed upon the change of the GDL architecture. The results show that a suitable grid size of the GDL can significantly accelerate mass transport by reducing the gas bubble size and the bubble resident time. An adhesive force measurement has further revealed the underlying mechanism. We then proposed and fabricated a novel hierarchical GDL, reaching a current density of 2 A/cm2 at a cell voltage of 1.95 V and 80 °C, one of the highest single-cell performances in pure-water-fed anion exchange membrane water electrolysis (AEMWE).