Metal-Free C60-Doped Mesoporous Carbon Nitride Drives Red-Light Photocatalysis.

The pursuit of novel strategies for synthesizing high-performance nanostructures of graphitic carbon nitride (g-C3N4) has garnered increasing scholarly attention in the field of photocatalysis. Herein, we have successfully designed a metal-free photocatalyst by integrating mesoporous carbon nitride (mpg-C3N4) and C60 through a straightforward and innovative method, marking the first instance of such an achievement. Under red light, the C60/mpg-C3N4 composite exhibited a significantly accelerated rhodamine B (RhB) photodecomposition rate, surpassing bulk g-C3N4 by more than 25.8 times and outperforming pure mpg-C3N4 by 7.8 times. The synergistic effect of C60 and the mesoporous structure significantly enhanced the photocatalytic performance of g-C3N4 by adjusting its electronic structure, broadening the light absorption range, increasing the active sites, and reducing the recombination of photogenerated carriers. This work presents a promising avenue for harnessing a metal-free, stable, efficient photocatalyst driven by red light, with potential for enhancing solar energy utilization in environmental remediation.

Sulfone/Carbonyl-Based Donor-Acceptor Fluorescent Dyes: Synthesis, Structures, Photophysical Properties and Cell Imaging.

Electron-accepting units play vital roles in constructing donor-acceptor (D-A) conjugated organic optoelectronic materials; the electronic structures and functions of the acceptors need to be carefully unveiled to controllably tailor the optoelectronic properties. We have synthesized two D-A conjugated organic fluorophores, TPA-SO and TPA-CO, with similar molecular skeletons based on sulfone- or carbonyl-containing polycyclic aromatic acceptors. Both TPA-SO and TPA-CO display obvious solvent polarity-dependent photophysical properties and large Stokes shift of over 100 nm for strong intramolecular charge transfer processes. Experimental evidence indicates that the sulfone group in TPA-SO merely serves as a strong electron-withdrawing unit. TPA-SO shows yellowish-green emission with a peak at 542 nm and an absolute photoluminescence quantum yield (PLQY) of 98 % in solution, whereas the carbonyl group in TPA-CO can act as both an electron-withdrawing unit and spin transition convertor, so TPA-CO displays red emission with a low absolute PLQY of 0.32 % in solution. Impressively, upon going from solution to aggregate state, TPA-SO nanoparticles keep a high PLQY of 9.5 % and moderate biocompatibility, thus they are good nano-agents for cellular fluorescence imaging. The results reveal that the inherent acceptor characteristic acts as a crucial effect in the photophysical properties and applications of the organic fluorophores.

Thermally Methanol Oxidation via the Mn1@Co3O4(111) Facet: Non-CO Reaction Pathway.

Co3O4, as the support of single-atom catalysts, is effective in electron-structure modulation to get distinct methanol adsorption behaviors and adjustable reaction pathways for the methanol oxidation reaction. Herein, we considered the facets that constitute a Co vacancy of the Co3O4(111) facet and a foreign metal atom M (M = Fe, Ni, Cu, Ru, Rh, Pd, Ag, Os, Ir, Pt, Au, Mn) leading to single-atom catalysts. The Mn1@Co3O4(111) facet is the facet considered the most favorable among all of the possible terminations. Oxygen adsorption, decomposition, and its co-adsorption with methanol are the vital steps of methanol oxidation at the exposed Mn1@Co3O4(111) facet, giving rise to the stable configuration: two O* and one CH3OH* adsorbates. Then, the Mn1@Co3O4(111) facet activates the O-H and C-H bonds within CH3OH*, advances CH3O* → H2CO* → HCOO* → COO*, and releases the products H2, H2O, and CO2 consecutively.

Nonmetal-doping of noble metal-based catalysts for electrocatalysis.

In response to the shortage of fossil fuels, efficient electrochemical energy conversion devices are attracting increasing attention, while the limited electrochemical performance and high cost of noble metal-based electrode materials remain a daunting challenge. The electrocatalytic performance of electrode materials is closely bound with their intrinsic electronic/ionic states and crystal structures. Apart from the nanoscale design and conductive composite strategies, heteroatom doping, particularly for nonmetal doping (e.g., hydrogen, boron, sulfur, selenium, phosphorus, and tellurium), is also another effective strategy to greatly promote the intrinsic activity of the electrode materials by tuning their atomic structures. From the perspective of electrocatalytic reactions, the effective atomic structure regulation could induce additional active sites, create rich defects, and optimize the adsorption capability, thereby contributing to the promotion of the electrocatalytic performance of noble metal-based electrocatalysts. Encouraged by the great progress achieved in this field, we have reviewed recent advancements in nonmetal doping for electrocatalytic energy conversion. Specifically, the doping effect on the atomic structure and intrinsic electronic/ionic state is also systematically illustrated and the relationship with the electrocatalytic performance is also investigated. It is believed that this review will provide guidance for the development of more efficient electrocatalysts.

Preparation and Characterization of TiO2 Nanowires Modified Organically with Coupling Agents.

Anatase-type one-dimensional TiO2 nanowire was prepared by hydrothermal method. The nanowires were modified by three kinds of silane coupling agents, such as KH550, KH560 and KH570. Flocculation was caused when the amount of modifier reached a certain level. When KH570 was used at 3.0 percent, at 80 °C, 4 h, and pH value between 9 and 10, modified nanowires had the highest 56.5 percent lipophilization degree, the lowest 0.562 per/nm² surface hydroxyl number, and the maximal 121.2° static contact angle.

Imidazoline Gemini Surfactants as Corrosion Inhibitors for Carbon Steel X70 in NaCl Solution.

The Gemini imidazoline surfactants were synthesized from a series of saturated fatty acids. Electrochemical impedance spectroscopy (EIS), polarization curve, and quantum chemistry methods were used to study the corrosion inhibition behavior of Gemini imidazoline surfactants for X70 carbon steel in NaCl solution. Results reveal that such kind of surfactants has an outstanding inhibition effect on carbon steel X70 in NaCl solution and that the restrained efficiency of Gemini imidazoline in an alkaline solution is better than that in a neutral solution. The shorter the carbon chain length, the higher the suppressive efficiency. The higher the concentration of Gemini imidazoline surfactant, the better the inhibition effect.

Self-assembly of an imidazolium surfactant in aprotic ionic liquids. 2. More than solvents.

As tailorable solvents, the physiochemical properties of ionic liquids can be tuned by the structure of ions. Herein, we investigate the structural effects of ILs on the self-assembly of surfactants. It has been confirmed that the cationic surfactant 1-hexadecyl-3-methylimidazolium bromide (C16mimBr) can self-assemble into micellar and lamellar lyotropic liquid crystal phases in the aprotic ionic liquid (AIL) 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim]BF4). In this work, we explore the aggregation behaviours in AILs with different alkyl chains on the imidazolium group, i.e., 1-propyl-3-methylimidazolium tetrafluoroborate ([Pmim]BF4), 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF4), 1-hexyl-3-methylimidazolium tetrafluoroborate ([Hmim]BF4) and 1-octyl-3-methylimidazolium tetrafluoroborate ([Omim]BF4). With the increase of the cation chain length, AILs have better solubility of the solvophobic part of the surfactants and hence a weaker driving force for self-assembly. Therefore, the critical micellization concentration of C16mimBr in AILs increases as confirmed by the surface tension and small angle X-ray scattering characterizations. More interesting things happen to the phase behaviours. Besides the micellar and lamellar lyotropic liquid crystal phases, a hexagonal lyotropic liquid crystal phase is formed in [Pmim]BF4 while hexagonal and bicontinuous cubic lyotropic liquid crystal phases are formed in [Bmim]BF4, [Hmim]BF4 and [Omim]BF4. It is surprising to observe richer phase behaviours in solvents of lower cohesive energy. The detailed structural information of various aggregates has been obtained by small-angle X-ray scattering. It is demonstrated that AILs work as not only solvents but also co-surfactants.

The self-assembly of an imidazolium surfactant in an aprotic ionic liquid. 1. Comparison in aprotic and protic ionic liquids.

The aggregation behaviour of a cationic surfactant in an aprotic ionic liquid has been explored. Prolate micelles are formed at low surfactant concentrations, while a lamellar lyotropic liquid crystal phase is formed at high surfactant concentrations.

6-Chloro-2H-1,4-benzoxazin-3(4H)-one.

In the title compound, C(8)H(6)ClNO(2), the conformation of the six-membered heterocyclic ring is close to screw boat and the mol-ecules are linked via inter-molecular N-H⋯O hydrogen bonds along the b axis.

Dissipative particle dynamics simulation of phase behavior of aerosol OT/water system.

The phase behaviors of the binary mixture of an anionic surfactant aerosol OT (AOT) and water are investigated on a mesoscopic level using dissipative particle dynamics (DPD) computer simulations. With a simple surfactant model, various aggregation structures of AOT in water including the lamellar, viscous isotropic, and reverse hexagonal phases are obtained, which agree well with the experimental phase diagram. Special attention is given on the unusual lamellar regions. Water diffusivity shows much useful information to understand how the phase behaviors varied with concentration and temperature. It is proposed that the anomalous lamellar phenomena at intermediate AOT concentration (about 40%) are due to the formation of a defective structure, pseudoreversed hexagonal phase, which evidently decreases the water diffusivity. After increasing temperature above 328 K, the pseudoreversed hexagonal structure will be partly transformed to a normal lamellar phase structure and the system lamellar ordering is therefore enhanced.

Hexagonal liquid crystalline phases formed in ternary systems of Brij 97-water-ionic liquids.

Phase diagrams of two ionic liquids: hydrophobic 1-butyl-3-methylimidazolium hexafluorophosphate (bmim-PF(6)) and relatively hydrophilic 1-butyl-3-methylimidazolium tetrafluoroborate (bmim-BF(4)) in aqueous solutions of Brij 97 were determined at 25 degrees C. Two hexagonal liquid crystalline phases formed in bmim-PF(6)- and bmim-BF(4)-containing ternary systems were investigated by means of small-angle X-ray scattering (SAXS) and rheological techniques, with comparison of composition and temperature effects. From analysis of the SAXS data, bmim-PF(6) is dominantly penetrated between the oxyethylene chains of surfactant molecules, whereas bmim-BF(4) is mainly located in the water layer of hexagonal phases. The strength of the network of hexagonal phase formed in the Brij 97/water/bmim-BF(4) system is appreciably stronger than that of the Brij 97/water/bmim-PF(6) system, indicated by the smaller area of the surfactant molecule at the interface and the higher moduli (G', G' '). Temperature has a converse effect on the lattice parameters of the two hexagonal phases.

Self-assembled structure in room-temperature ionic liquids.

Self-assembled vesicles, structurally equivalent to some hydrotropes, have been obtained from a Zn2+-fluorous surfactant or in the mixture of Zn2+-fluorous surfactant/zwitterionic surfactant in room-temperature ionic liquids (RTILs). The existence of bilayers arranged in vesicles in RTILs would be very exciting, open several new possibilities as reaction media, and increase our understanding of the physical and chemical factors for self-assembling systems in RTILs.

Synthesis of gold nano- and microplates in hexagonal liquid crystals.

Single-crystalline gold nano- and microplates with triangular or hexagonal shapes are synthesized by reduction of HAuCl(4) in lyotropic liquid crystal (LLC) mainly made of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers and water after adding a small amount of capping agents, cetyltrimethylammonium bromide (CTAB) or tetrabutylammonium bromide (TBAB). During the growth of such plates, capping agents play the crucial role. It is found that there is an optimal value of CTAB or TBAB concentration for producing microplates. The selective adsorption of CTAB or TBAB on certain crystallographic facets may be the key point of the supposed mechanism. Although LLC does not really act as a template, it provides an ordered structure confining CTAB as well as the nascent metal nuclei, which enhances the oriented attachment of nuclei and thus the consequent growth of single-crystal plates.

Lyotropic liquid crystalline phases formed in an ionic liquid.

Lyotropic liquid crystalline phases of an amphiphilic block copolymer are constructed and characterized in an ionic liquid with comparison of component and temperature effects.