Hydrodehalogenation of organohalides by Et3SiH catalysed by group 4 metal complexes and B(C6F5)3.

Catalytic hydrodehalogenation (HDH) of aliphatic organohalides such as trifluorotoluenes by Et3SiH proceeds in the presence of readily available group 4 metal compounds: Cp'2MX2 (Cp' = η5-C5H5 or η5-C5Me5; X = F, Cl, or Me; M = Ti, Zr, or Hf), CpTiCl3 and TiCl4 with a catalytic amount of B(C6F5)3. The use of metallocenes in combination with the borane activator leads to a better selectivity of the reaction, i.e., suppression of Friedel-Crafts alkylations of arenes.

MoO3 on zeolites MCM-22, MCM-56 and 2D-MFI as catalysts for 1-octene metathesis.

Highly active olefin metathesis catalysts were prepared by thermal spreading MoO3 and/or MoO2(acac)2 on MWW zeolites (MCM-22, delaminated MCM-56) and on two-dimensional MFI (all in NH4 + form). The catalysts' activities were tested in the metathesis of neat 1-octene (as an example of a longer chain olefin) at 40 °C. Catalysts with 6 wt % or 5 wt % of Mo were used. The acidic character of the supports had an important effect on both the catalyst activity and selectivity. The catalyst activity increases in the order 6MoO3/HZSM-5(25) (Si/Al = 25) << 6MoO2(acac)2/MCM-22(70) < 6MoO3/2D-MFI(26) < 6MoO3/MCM-56(13) < 6MoO3/MCM-22(28) reflecting both the enhancing effect of the supports' acidity and accessibility of the catalytic species on the surface. On the other hand the supports' acidity decreases the selectivity to the main metathesis product C14 due to an acid-catalyzed double bond isomerization (followed by cross metathesis) and oligomerization. 6MoO3/2D-MFI(26) with a lower concentration of the acidic centres resulting in catalysts of moderate activity but with the highest selectivity.

Hydrogenation of titanocene and zirconocene bis(trimethylsilyl)acetylene complexes.

Reactions following the addition of dihydrogen under maximum atmospheric pressure to bis(trimethylsilyl)acetylene (BTMSA) complexes of titanocenes, [(η5-C5H5-nMen)2Ti(η2-BTMSA)] (n = 0, 1, 3, and 4) (1A-1D), and zirconocenes, [(η5-C5H5-nMen)2Zr(η2-BTMSA)] (n = 2-5) (4A-4D), proceeded in diverse ways and, depending on the metal, afforded different products. The former complexes lost, in all cases, their BTMSA ligand via its hydrogenation to bis-1,2-(trimethylsilyl)ethane when reacted at 80 °C for a prolonged reaction time. For n = 0, 1, and 3, the titanocene species formed in situ dimerised via the formation of fulvalene ligands and two bridging hydride ligands, giving known green dimeric titanocenes (2A-2C). For n = 4, a titanocene hydride [(η5-C5HMe4)2TiH] (2D) was formed, similarly to the known [(η5-C5Me5)2TiH] (2E) for n = 5; however, in contrast to this example, 2D in the absence of dihydrogen spontaneously dehydrogenated to the known Ti(iii)-Ti(iii) dehydro-dimer [{Ti(η5-C5HMe4)(µ-η1:η5-C5Me4)}2] (3B). This complex has now been fully characterised via spectroscopic methods, and was shown through EPR spectroscopy to attain an intramolecular electronic triplet state. The zirconocene-BTMSA complexes 4A-4D reacted uniformly with one hydrogen molecule to give Zr(iv) zirconocene hydride alkenyls, [(η5-C5H5-nMen)2ZrH{C(SiMe3)[double bond, length as m-dash]CH(SiMe3)}] (n = 2-5) (5A-5D). These were identified through their 1H and 13C NMR spectra, which show features typical of an agostically bonded proton, [double bond, length as m-dash]CH(SiMe3). Compounds 5A-5D formed equilibria with the BTMSA complexes 4A-4D depending on hydrogen pressure and temperature.

Ru complexes of Hoveyda-Grubbs type immobilized on lamellar zeolites: activity in olefin metathesis reactions.

Hoveyda-Grubbs type catalysts with cationic tags on NHC ligands were linker-free immobilized on the surface of lamellar zeolitic supports (MCM-22, MCM-56, MCM-36) and on mesoporous molecular sieves SBA-15. The activity of prepared hybrid catalysts was tested in olefin metathesis reactions: the activity in ring-closing metathesis of citronellene and N,N-diallyltrifluoroacetamide decreased in the order of support MCM-22 ≈ MCM-56 > SBA-15 > MCM-36; the hybrid catalyst based on SBA-15 was found the most active in self-metathesis of methyl oleate. All catalysts were reusable and exhibited low Ru leaching (<1% of Ru content). XPS analysis revealed that during immobilization ion exchange between Hoveyda-Grubbs type catalyst and zeolitic support occurred in the case of Cl(-) counter anion; in contrast, PF6 (-) counter anion underwent partial decomposition.

Hoveyda-Grubbs type metathesis catalyst immobilized on mesoporous molecular sieves MCM-41 and SBA-15.

A commercially available Hoveyda-Grubbs type catalyst (RC303 Zhannan Pharma) was immobilized on mesoporous molecular sieves MCM-41 and on SBA-15 by direct interaction with the sieve wall surface. The immobilized catalysts exhibited high activity and nearly 100% selectivity in several types of alkene metathesis reactions. Ru leaching was found to depend on the substrate and solvent used (the lowest leaching was found for ring-closing metathesis of 1,7-octadiene in cyclohexane - 0.04% of catalyst Ru content). Results of XPS, UV-vis and NMR spectroscopy showed that at least 76% of the Ru content was bound to the support surface non-covalently and could be removed from the catalyst by washing with THF.

The role of crystallization parameters for the synthesis of germanosilicate with UTL topology.

The investigation of the critical synthesis parameters of germanosilicate of UTL topology, possessing 14- and 12-rings, has been carried out in detail. (6R,10S)-6,10-Dimethyl-5-azoniaspiro[4.5]decane hydroxide was used as the structure-directing agent (SDA). The kinetics of the synthesis, the role of the Si/Ge ratio in the synthesis mixture, and the effect of the calcination procedure were investigated in relation to the crystallinity and textural properties of the synthesized material. The optimum synthesis time was found to be six days for Si/Ge and (Si+Ge)/SDA molar ratios of 2 and 1.7, respectively. The UTL zeolite crystallizes as small sheets of 10 mum in size. The micropore volume of the best crystals is 0.22 cm(3) g(-1) with a micropore diameter of 1.05 nm, based on DFT and Saito-Foley analyses of adsorption data.

Solvent-induced textural changes of as-synthesized mesoporous alumina, as reported by spin probe electron spin resonance spectroscopy.

The effect of solvent used during the synthesis and postsynthesis treatment on textural properties of organized mesoporous aluminas was investigated and related to the behavior of spin probes studied by electron spin resonance (ESR) spectroscopy. It was found that the structure of surfactant aggregates serving in the as-synthesized precipitates as templates could be easily modified by treatment with different solvents. This treatment induces corresponding variations in surface areas, mesopore volumes, and mesopore diameters of the final products. The ESR spectrum of 5-doxyl stearic acid spin probe properly reflects the changes in template structure based on changes of the solvent used and represents an early indicator of the corresponding textural modifications of the mesoporous alumina.

High-resolution adsorption of nitrogen on mesoporous alumina.

Nitrogen adsorption isotherms on organized mesoporous aluminas prepared by several different synthesis procedures were analyzed by means of comparative plot method using Aluminiumoxid C (Degussa) and alpha-alumina as reference adsorbents. To secure the high-resolution ability of this method, all the adsorption measurements were carefully performed in a relative pressure range from 10(-6) to 0.99. Although some samples of organized mesoporous alumina were treated at temperatures up to 1000 degrees C, only the Aluminiumoxid C has proved to be suitable as a reference adsorbent. The comparative analysis of isotherms on activated aluminas has shown that this method allows the determination of very small amounts of microporosity. The standard nitrogen adsorption data for Aluminiumoxid C and alpha-alumina are presented in a tabulated form, which consists of 91 points for each adsorbent.