Stenotrophomonas maltophilia virulence: a current view.

Stenotrophomonas maltophilia is an opportunistic pathogen intrinsically resistant to multiple and broad-spectrum antibiotics. Although the bacterium is considered a low-virulence pathogen, it can cause various severe diseases and contributes significantly to the pathogenesis of multibacterial infections. During the COVID-19 pandemic, S. maltophilia has been recognized as one of the most common causative agents of respiratory co-infections and bacteremia in critically ill COVID-19 patients. The high ability to adapt to unfavorable environments and new habitat niches, as well as the sophisticated switching of metabolic pathways, are unique mechanisms that attract the attention of clinical researchers and experts studying the fundamental basis of virulence. In this review, we have summarized the current knowledge on the molecular aspects of S. maltophilia virulence and putative virulence factors, partially touched on interspecific bacterial interactions and iron uptake systems in the context of virulence, and have not addressed antibiotic resistance.

Perchlozone Resistance in Clinical Isolates of Mycobacterium tuberculosis.

The emergence of drug-resistant tuberculosis forced the development of new drugs and the screening of more effective or less toxic analogues. Mycolic acid biosynthesis is targeted by several antituberculosis drugs, isoniazid being one of the most important in tuberculosis therapy. Recently, perchlozone, acting on another step in the FAS-II cycle, was officially approved for tuberculosis treatment in the Russian Federation and was included in the Russian national clinical guidelines. Using the serial dilution method on 7H10 agar plates for perchlozone and a Sensititre MYCOTB microdilution plate, we analyzed the phenotypic properties of primary clinical isolates of M. tuberculosis and analyzed the molecular determinants of resistance to isoniazid, ethionamide, and perchlozone. We found a wide variation in the MIC of perchlozone from 2 to 64 mg/L, correlating with the overall resistance profile: the MIC was higher for MDR and pre-XDR isolates. The cross-resistance between ethionamide and perchlozone was driven by mutations in the ethA gene encoding monooxygenase responsible for the activation of both drugs. The presumably susceptible to perchlozone and wild-type strains had MICs ranging from 2 to 4 mg/L, and the breakpoint was estimated to be 4 or 8 mg/L. In conclusion, susceptibility to perchlozone is retained for a part of the MDR strains, as is susceptibility to ethionamide, providing the possibility of therapy for such cases based on phenotypic or molecular analysis.

Variability of Mycobacterium avium Complex Isolates Drug Susceptibility Testing by Broth Microdilution.

Non-tuberculous mycobacteria are widely distributed in environments and are capable of infecting humans, particularly those with a compromised immune system. The most prevalent species that cause nontuberculous mycobacterial lung diseases are slow-growing bacteria from the Mycobacterium avium complex (MAC), mainly M. avium or M. intracellulare. The key treatment of MAC infections includes macrolides, ethambutol, and rifampicin; however, the therapy outcomes are unsatisfactory. Phenotypic drug susceptibility testing is a conditional recommendation prior to treatment, and critical concentrations for clarithromycin, amikacin, moxifloxacin, and linezolid have been established. In this review, data from studies on the determination of MIC of clinical isolates using the broth microdilution method were summarized. A significant variation in the MIC distributions from different studies was found. The main reasons could impact the findings: insufficient reproducibility of the phenotypic testing and variation in species lineages identified in different laboratories, which could have various intrinsic susceptibility to drugs. For most of the drugs analyzed, the MICs are too high, which could undermine the treatment efficiency. Further improvement of treatment outcomes demands the validation of microbiological resistance criteria together with the identification of molecular mechanisms of resistance.

Molecular Determinants of Ethionamide Resistance in Clinical Isolates of Mycobacterium tuberculosis.

BACKGROUND: Ethionamide and prothionamide are now included in group C of the WHO recommended drugs for the treatment of tuberculosis resistant to rifampicin and multidrug-resistant tuberculosis. The clinical relevance of ethionamide and prothionamide has increased with the wide spread of resistant tuberculosis. METHODS: We retrospectively analyzed 349 clinical isolates obtained between 2016 and 2020. The susceptibility to ethionamide was tested using both the BactecTM MGITTM 960 system and the SensititreTM MYCOTB plate. RESULTS: The MIC of ethionamide increases with the total resistance of the isolates in a row from susceptible to XDR strains. A significant part of the isolates have a MIC below the breakpoint: 25%, 36%, and 50% for XDR, pre-XDR, and MDR strains. Sensitivity and specificity of detection of mutations were 96% and 86% using MGIT resistance as a reference. CONCLUSIONS: Phenotypic methods for testing ethionamide are imperfectly correlated, and the isolates with MIC of 5 mg/L have the intermediate resistance. A significant proportion of resistant TB cases are susceptible and eligible for ethionamide treatment. Resistance could be explained using only analysis of loci ethA, PfabG1, and inhA for most isolates in the Moscow region. The promoter mutation PfabG1 c(-15)t predicts resistance to ethionamide with high specificity but low sensitivity.

Genetic Profile of Linezolid-Resistant M. tuberculosis Clinical Strains from Moscow.

BACKGROUND: Linezolid, bedaquiline, and newer fluoroquinolones are currently placed as priority Group A drugs for the treatment of drug-resistant tuberculosis. The number of reported linezolid-resistant clinical strains is still low, and the correlation of molecular determinants with phenotype is not perfect. METHODS: We determined the linezolid MICs for clinical isolates from the Moscow region and identified mutations in rplC and rrl genes. RESULTS: All 16 linezolid-resistant isolates had previously reported mutations in the rplC or rrl loci, and 13 of them bore a RplC C154R substitution. Detection of this substitution in a heteroresistant state was not successful, probably, due to the more stable DNA secondary structure of the mutated fragment, which precludes its amplification in mixes with the wild-type DNA. Strains with an rplC mutation had higher linezolid MIC compared to isolates with rrl mutations. CONCLUSIONS: Linezolid resistance mostly emerged during treatment with the latest regimen. Three primary cases with linezolid resistance question the possible transmission of totally drug-resistant tuberculosis in the Moscow region, which demands further investigation.

Reduced susceptibility and resistance to bedaquiline in clinical M. tuberculosis isolates.

OBJECTIVES: Bedaquiline is an effective drug used to treat MDR and XDR tuberculosis, providing high cure rates in complex therapy. Mutations in the mmpR (rv0678) and atpE genes are associated with reduced susceptibility to bedaquiline and have been identified in both in vitro selected strains and clinical isolates. However, the phenotypic criteria used to detect bedaquiline resistance have yet to be established due to the collection of few clinical isolates from patients receiving bedaquiline-containing treatment regimens. METHODS: One hundred eighty-two clinical isolates from 74 patients receiving bedaquiline and 163 isolates from 107 patients not exposed to bedaquiline were analysed. The bedaquiline MICs were tested using serial dilutions on 7H11 agar plates and the Bactec MGIT 960 system. The mmpR and atpE genes were sequenced by Sanger sequencing. RESULTS: The 7H11 agar method allowed for rapid discrimination between mutated and wild-type isolates and between exposed and non-exposed isolates. Seventy-three percent of bedaquiline-exposed isolates, as well as 91% of isolates with mutations, had an elevated bedaquiline MIC (≥ 0.12 mg/L on 7H11 media) compared to the reference isolates (89% had an MIC ≤ 0.03 mg/L). Previously reported in vitro-selected mutants (E61D and A63P) and novel AtpE substitutions (G25S and D28G) were observed in the clinical isolates. Substitutions in codon 63 of AtpE were likely associated with a higher bedaquiline MIC. Five new cases of pre-existing reduced susceptibility to bedaquiline, accompanied by mmpR mutations in most isolates, without a history of bedaquiline treatment were identified. CONCLUSIONS: Bedaquiline treatment leads to an elevated bedaquiline MIC and the acquisition of mmpR and atpE gene mutations in tuberculosis strains. The standardisation of bedaquiline phenotypic susceptibility testing is urgently needed based on observed discrepancies between our study and previous studies and differences in solid and liquid media MIC determinations.

Redefining MDR-TB: Comparison of Mycobacterium tuberculosis clinical isolates from Russia and Taiwan.

Multidrug-resistant (MDR) and extensively drug-resistant (XDR) tuberculosis are global challenges due to the limited number of effective drugs for treatment. Treatment with less than 4-5 effective drugs might lead to the further emergence of drug resistance and poor clinical outcomes. For better prediction of treatment outcomes, we compared drug-resistance profiles of consecutive clinical MDR Mycobacterium tuberculosis isolates from high- and low-burden settings. This was a retrospective cohort study. We analysed 225 and 229 MDR isolates from Moscow (Russia) and Taiwan, respectively, obtained between 2014 and 2015. Drug susceptibility testing was performed by the Bactec MGIT 960 automated system and the agar proportion method. Detection of resistance-associated mutations in the M. tuberculosis genome was carried out by an array and/or sequencing of selected loci. The principal differences between resistance profiles of MDR isolates in the two countries were the percentages of pre-XDR (40.9% vs. 14.8%) and XDR (34.7% vs. 1.7%) isolates, both of which were significantly higher in Moscow isolates. Forty-eight (33%) of 147 MDR and pre-XDR Russian isolates fall into a group with less than four effective drugs, which accounts for 40% (N = 120) of these isolates. The other 60% in this group were XDR strains (N = 72). Consequently, the average number of effective anti-tuberculosis drugs for MDR-TB treatment was lower for Russian isolates (3 vs. 7). Furthermore, a notable percentage (9%) of isolates resistant to kanamycin harboured mutations in the whiB7 locus, which was not detected by molecular tests targeting common mutations in the rrs and eis loci. We found that 98.2% and 45.9% of MDR isolates from Moscow and Taiwan, respectively, were resistant to streptomycin. Molecular tests for detecting resistance to drugs other than rifampicin, isoniazid, fluoroquinolones, and second-line injectable drugs are needed for individualized therapy. The conventional MDR treatment schemes most probably fail in these cases due to the limited number of effective drugs.

Examination of bedaquiline- and linezolid-resistant Mycobacterium tuberculosis isolates from the Moscow region.

Objectives: To study the isolates with acquired resistance to bedaquiline and linezolid that were obtained from patients enrolled in a clinical study of a novel therapy regimen for drug-resistant TB in Moscow, Russia. Methods: Linezolid resistance was detected using MGIT 960 with a critical concentration of 1 mg/L. The MIC of bedaquiline was determined using the proportion method. To identify genetic determinants of resistance, sequencing of the mmpR ( Rv0678 ), atpE , atpC , pepQ , Rv1979c , rrl , rplC and rplD loci was performed. Results: A total of 85 isolates from 27 patients with acquired resistance to linezolid and reduced susceptibility to bedaquiline (MIC ≥0.06 mg/L) were tested. Most mutations associated with a high MIC of bedaquiline were found in the mmpR gene. We identified for the first time two patients whose clinical isolates had substitutions D28N and A63V in AtpE, which had previously been found only in in vitro -selected strains. Several patients had isolates with elevated MICs of bedaquiline prior to treatment; four of them also bore mutations in mmpR , indicating the presence of some hidden factors in bedaquiline resistance acquisition. The C154R substitution in ribosomal protein L3 was the most frequent in the linezolid-resistant strains. Mutations in the 23S rRNA gene (g2294a and g2814t) associated with linezolid resistance were also found in two isolates. Heteroresistance was identified in ∼40% of samples, which reflects the complex nature of resistance acquisition. Conclusions: The introduction of novel drugs into treatment must be accompanied by continuous phenotypic susceptibility testing and the analysis of genetic determinants of resistance.

A Comparison of the Sensititre MycoTB Plate, the Bactec MGIT 960, and a Microarray-Based Molecular Assay for the Detection of Drug Resistance in Clinical Mycobacterium tuberculosis Isolates in Moscow, Russia.

BACKGROUND: The goal of this study was to compare the consistency of three assays for the determination of the drug resistance of Mycobacterium tuberculosis (MTB) strains with various resistance profiles isolated from the Moscow region. METHODS: A total of 144 MTB clinical isolates with a strong bias toward drug resistance were examined using Bactec MGIT 960, Sensititre MycoTB, and a microarray-based molecular assay TB-TEST to detect substitutions in the rpoB, katG, inhA, ahpC, gyrA, gyrB, rrs, eis, and embB genes that are associated with resistance to rifampin, isoniazid, fluoroquinolones, second-line injectable drugs and ethambutol. RESULTS: The average correlation for the identification of resistant and susceptible isolates using the three methods was approximately 94%. An association of mutations detected with variable resistance levels was shown. We propose a change in the breakpoint minimal inhibitory concentration for kanamycin to less than 5 µg/ml in the Sensititre MycoTB system. A pairwise comparison of the minimal inhibitory concentrations (MICs) of two different drugs revealed an increased correlation in the first-line drug group and a partial correlation in the second-line drug group, reflecting the history of the preferential simultaneous use of drugs from these groups. An increased correlation with the MICs was also observed for drugs sharing common resistance mechanisms. CONCLUSIONS: The quantitative measures of phenotypic drug resistance produced by the Sensititre MycoTB and the timely detection of mutations using the TB-TEST assay provide guidance for clinicians for the choice of the appropriate drug regimen.

Simultaneous drug resistance detection and genotyping of Mycobacterium tuberculosis using a low-density hydrogel microarray.

BACKGROUND: Nucleic acid amplification tests are widely used in TB diagnostics. Priority tasks in their development consist of increasing the specificity and sensitivity of the detection of resistance to a wide spectrum of anti-TB drugs. METHODS: We developed a multiplexed assay allowing the detection of 116 drug resistance-determining mutations in the rpoB, katG, inhA, ahpC, gyrA, gyrB, rrs, eis and embB genes in the Mycobacterium tuberculosis complex genome and six SNPs to identify the main lineages circulating in Russia. The assay is based on the amplification of 17 fragments of the genome using the universal primer adapter technique and heat pulses at the elongation step, followed by hybridization on a microarray. RESULTS: The method was evaluated using 264 pairs of clinical samples and corresponding isolates. A significant proportion (25%) of smear-negative samples were correctly analysed by microarray analysis in addition to 96% of smear-positive samples. The sensitivity and specificity of the assay exceeded 90% for rifampicin, isoniazid, ofloxacin and second-line injection drugs. In agreement with previous studies, the specificity of ethambutol resistance was as low as 57%, while the sensitivity was 89.9%. Strong association of the Beijing lineage with a resistant phenotype was observed. Euro-American lineage strains, excluding Ural and LAM, were predominantly associated with the susceptible phenotype. CONCLUSIONS: The developed test has a high sensitivity and specificity and can be directly applied to clinical samples. The combination of mutation-based drug resistance profiling and basic genotyping could be useful for clinical microbiology studies and epidemiological surveillance of the M. tuberculosis complex.

Rotary-based platform with disposable fluidic modules for automated isolation of nucleic acids.

We describe the development and evaluation of a rotary-based platform with multiple disposable fluidic modules for simultaneous automatic nucleic acid (NA) isolation from up to 24 biological samples. The procedure is performed inside insulated individual disposable modules, which minimizes both the risk of infection of personnel and laboratory cross-contamination. Each module is a segment of a circular cylinder containing a leak-proof inlet port for sample input, reservoirs with lyophilized chemicals and solvents, fluidic channels, stoppers, valves, a waste reservoir and an outlet port equipped with the standard micro test tube for NA collection. The entire platform, apart from the rotor that accommodates 24 modules, consists of functional elements that provide spinning of the rotor, reagent mixing, pressure delivery, and heating of reaction mixtures. The transfer of the reaction mixtures inside the modules is performed either with rotation of the rotor or with excessive air pressure applied to the module's reservoirs. The entire process takes less than 40 min, starting from the sample loading to the recovery of the purified NA, and it allows NA isolation both from bacterial cells and viral particles. The feasibility and reproducibility of the developed platform was demonstrated by the NA isolation from suspensions of Bacillus thuringiensis and Mycobacterium tuberculosis cells within a concentration range of 10(8) to 10(2) cells/ml. Isolation of NAs from blood plasma samples with varying concentration of hepatitis B and C viruses from 10(7) to 10(2) particles/ml were also successful. The purity and integrity of the extracted NAs were both reliable for performing quantitative PCR.

Evaluation of a low-density hydrogel microarray technique for mycobacterial species identification.

In addition to the obligatory pathogenic species of the Mycobacterium tuberculosis complex and Mycobacterium leprae, the genus Mycobacterium also includes conditionally pathogenic species that in rare cases can lead to the development of nontuberculous mycobacterial diseases. Because tuberculosis and mycobacteriosis have similar clinical signs, the accurate identification of the causative agent in a clinical microbiology laboratory is important for diagnostic verification and appropriate treatment. This report describes a low-density hydrogel-based microarray containing oligonucleotide probes based on the species-specific sequences of the gyrB gene fragment for mycobacterial species identification. The procedure included the amplification of a 352-nucleotide fragment of the gene and its hybridization on a microarray. The triple-species-specific probe design and the algorithm for hybridization profile recognition based on the calculation of Pearson correlation coefficients, followed by the construction of a profile database, allowed for the reliable and accurate identification of mycobacterial species, including mixed-DNA samples. The assay was used to evaluate 543 clinical isolates from two regions of Russia, demonstrating its ability to detect 35 mycobacterial species, with 99.8% sensitivity and 100% specificity when using gyrB, 16S, and internal transcribed spacer (ITS) fragment sequencing as the standard. The testing of clinical samples showed that the sensitivity of the assay was 89% to 95% for smear-positive samples and 36% for smear-negative samples. The large number of identified species, the high level of sensitivity, the ability to detect mycobacteria in clinical samples, and the up-to-date profile database make the assay suitable for use in routine laboratory practice.

Spoligotyping of Mycobacterium tuberculosis complex isolates using hydrogel oligonucleotide microarrays.

Mycobacterium tuberculosis remains a leading cause of morbidity and mortality worldwide. This circumstance underscores the relevance of population studies of tuberculosis for transmission dynamics control. In this study, we describe a conversion of the spoligotyping of M.tuberculosis complex isolates on a platform of custom designed hydrogel microarrays (biochips). An algorithm of automated data processing and interpretation of hybridization results using online database was proposed. In total, the 445 samples were tested. Initially, 97 samples representing multiple species of M.tuberculosis complex and nontuberculous mycobacteria were used for protocol optimization and cut-off settings. The developed assay was further evaluated on the out-group of the 348 mycobacterial samples. Results showed high concordance with the conventional membrane-based spoligotyping method. Diagnostic sensitivity and diagnostic specificity of the spoligo-biochip assay were 99.1% and 100%, respectively. The analytical sensitivity was determined to be 500 genomic equivalents of mycobacterial DNA. The high sensitivity and specificity, ease of operation procedures, and the automatic processing of measured data make the developed assay a useful tool for the rapid and accurate genotyping of M. tuberculosis.

Detection of second-line drug resistance in Mycobacterium tuberculosis using oligonucleotide microarrays.

BACKGROUND: The steady rise in the spread of multidrug-resistant tuberculosis (MDR-TB) and extensively drug-resistant tuberculosis (XDR-TB) requires rapid and reliable methods to identify resistant strains. The current molecular methods to detect MTB resistance to second-line drugs either do not cover an extended spectrum of mutations to be identified or are not easily implemented in clinical laboratories. A rapid molecular technique for the detection of resistance to second-line drugs in M. tuberculosis has been developed using hybridisation analysis on microarrays. METHODS: The method allows the identification of mutations within the gyrA and gyrB genes responsible for fluoroquinolones resistance and mutations within the rrs gene and the eis promoter region associated with the resistance to injectable aminoglycosides and a cyclic peptide, capreomycin. The method was tested on 65 M. tuberculosis clinical isolates with different resistance spectra that were characterised by their resistance to ofloxacin, levofloxacin, moxifloxacin, kanamycin and capreomycin. Also, a total of 61 clinical specimens of various origin (e.g., sputum, bronchioalveolar lavage) were tested. RESULTS: The sensitivity and specificity of the method in the detection of resistance to fluoroquinolones were 98% and 100%, respectively, 97% and 94% for kanamycin, and 100% and 94% for capreomycin. The analytical sensitivity of the method was approximately 300 genome copies per assay. The diagnostic sensitivity of the assay ranging from 67% to 100%, depending on the smear grade, and the method is preferable for analysis of smear-positive specimens. CONCLUSIONS: The combined use of the developed microarray test and the previously described microarray-based test for the detection of rifampin and isoniazid resistance allows the simultaneous identification of the causative agents of MDR and XDR and the detection of their resistance profiles in a single day.

Gel-based microarrays in clinical diagnostics in Russia.

Immobilization of molecular probes in 3D hydrogel elements provides some essential advantages compared with conventional flat surfaces. In this article, an integrated technology based on the use of low-density microarrays comprised of hemispherical gel elements, developed at the Engelhardt Institute of Molecular Biology (Moscow, Russia) for various applications will be reviewed. The structure of the gel can be adapted for immobilization of virtually any biological molecules in a natural hydrophilic environment. The discrimination between matching and mismatching duplexes of nucleic acids in these conditions is more reliable than on conventional flat surfaces, minimizing the number of elements needed to detect specific sequences. Protein molecules immobilized in hydrogel-based biochips better preserve their biological properties. As described in this article, such biochips were successfully applied for laboratory diagnostics in a wide variety of clinical conditions involving the identification of bacterial and viral pathogens, cancer-related mutations and protein tumor markers.

Dual-In/Out strategy for genes integration into bacterial chromosome: a novel approach to step-by-step construction of plasmid-less marker-less recombinant E. coli strains with predesigned genome structure.

BACKGROUND: The development of modern producer strains with metabolically engineered pathways poses special problems that often require manipulating many genes and expressing them individually at different levels or under separate regulatory controls. The construction of plasmid-less marker-less strains has many advantages for the further practical exploitation of these bacteria in industry. Such producer strains are usually constructed by sequential chromosome modifications including deletions and integration of genetic material. For these purposes complex methods based on in vitro and in vivo recombination processes have been developed. RESULTS: Here, we describe the new scheme of insertion of the foreign DNA for step-by-step construction of plasmid-less marker-less recombinant E. coli strains with chromosome structure designed in advance. This strategy, entitled as Dual-In/Out, based on the initial Red-driven insertion of artificial phi80-attB sites into desired points of the chromosome followed by two site-specific recombination processes: first, the phi80 system is used for integration of the recombinant DNA based on selective marker-carrier conditionally-replicated plasmid with phi80-attP-site, and second, the lambda system is used for excision of inserted vector part, including the plasmid ori-replication and the marker, flanked by lambda-attL/R-sites. CONCLUSION: The developed Dual-In/Out strategy is a rather straightforward, but convenient combination of previously developed recombination methods: phages site-specific and general Red/ET-mediated. This new approach allows us to detail the design of future recombinant marker-less strains, carrying, in particular, rather large artificial insertions that could be difficult to introduce by usually used PCR-based Recombineering procedure. The developed strategy is simple and could be particularly useful for construction of strains for the biotechnological industry.

Escherichia coli ORF ybhE is pgl gene encoding 6-phosphogluconolactonase (EC 3.1.1.31) that has no homology with known 6PGLs from other organisms.

The pentose-phosphate pathway (PPP) is an important part of central metabolism in many organisms. A pgl(-) mutation that decreases the efficiency of the second stage of PPP has been described and mapped at approx. 17.2 min of the Escherichia coli chromosome more than 30 years ago. Although it has recently been shown that deletion of ORF ybhE leads to earlier detected Pgl(-) phenotype for E. coli mutant strain, 6-phosphogluconolactonase from this organism has not been characterized. In the present, independent investigation we show that the Pgl(-) phenotype of DeltaybhE MG1655 could be complemented by insertion of the well-characterized pgl gene from Pseudomonas putida whose protein product has no visible homology with E. coli YbhE. Moreover, a final confirmation that ybhE actually encodes 6PGL in E. coli was obtained through overexpression of the cloned gene, purification of the protein product, followed by direct determination of its enzymatic activity in vitro.