Ceria Particles as Efficient Dopant in the Electrodeposition of Zn-Co-CeO2 Composite Coatings with Enhanced Corrosion Resistance: The Effect of Current Density and Particle Concentration.

Novel Zn-Co-CeO2 protective composite coatings were deposited successfully from chloride plating solutions. Two different types of ceria sources were used and compared: commercial ceria powder and home-made ceria sol. Electrodeposition was performed by a direct current in the range of 1-8 A dm-2. Two different agitation modes were used and compared, magnetic stirring and ultrasound-assisted stirring (US). The influence of magnetic stirring on the stability of the related plating baths was evaluated via a dynamic scattering method. The results pointed to better stability of the prepared ceria sol. The morphology of the composite coatings was examined by scanning electron microscopy (SEM), and particle content was determined by energy-dispersive X-ray spectroscopy (EDS). The results showed that the increase in the deposition current density was not beneficial to the coating morphology and particle content. The corrosion behavior of the Zn-Co-CeO2 composite coatings was analyzed and compared by electrochemical impedance spectroscopy and polarization resistance. The ultrasound-assisted electrodeposition at small current densities was favorable for obtaining composite coatings with enhanced corrosion stability. The protection was more effective when US was applied and, additionally, upon utilization of ceria sol as a particle source, which was revealed by higher polarization resistance and greater low-frequency impedance modulus values for sol-derived composite coatings deposited under ultrasound.

Tuning Properties of Cerium Dioxide Nanoparticles by Surface Modification with Catecholate-type of Ligands.

Cerium dioxide (CeO2) finds applications in areas such as corrosion protection, solar cells, or catalysis, finding increasing applications in biomedicine. This work reports on surface-modified CeO2 particles in order to tune their applicability in the biomedical field. Stable aqueous CeO2 sol, consisting of 3-4 nm in size crystallites, was synthesized using forced hydrolysis. The coordination of catecholate-type of ligands (catechol, caffeic acid, tiron, and dopamine) to the surface-Ce atoms is followed with the appearance of absorption in the visible spectral range as a consequence of interfacial charge-transfer complex formation. The spectroscopic observations are complemented with the density functional theory calculations using a cluster model. The synthesized samples were characterized by X-ray diffraction analysis, transmission electron microscopy, and nitrogen adsorption-desorption isotherms. The ζ-potential measurements indicated that the stability of CeO2 sol is preserved upon surface modification. The pristine CeO2 nanoparticles (NPs) are nontoxic against pre-osteoblast cells in the entire studied concentration range (up to 1.5 mM). Hybrid CeO2 NPs, capped with dopamine or caffeic acid, display toxic behavior for concentrations ≥0.17 and 1.5 mM, respectively. On the other hand, surface-modified CeO2 NPs with catechol and tiron promote the proliferation of pre-osteoblast cells.

Sorption of divalent heavy metal ions onto functionalized biogenic hydroxyapatite with caffeic acid and 3,4-dihydroxybenzoic acid.

The sorption ability of biogenic hydroxyapatite (BHAP) towards heavy metal ions (Pb, Cu, Ni, Cd, and Zn) is compared with functionalized BHAP powders with caffeic acid (CA) and 3,4-dihydroxybenzoic acid (3,4-DHBA). The functionalization of the BHAP with either CA or 3,4-DHBA is indicated by the appearance of the colored powders due to the formation of the interfacial charge transfer (ICT) complexes. The detailed characterization of as-prepared and functionalized BHAP samples was performed using transmission electron microscopy, reflection spectroscopy, thermogravimetric analysis and determination of zeta potential. All three sorbents clearly displayed preferential sorption of Pb ions when the total concentration of multi-component equimolar solutions of heavy metal ions is high. It should be emphasized that the sorption capacity of functionalized BHAP with either CA or 3,4-BHAP was found to be higher, up to 60%, compared to as-prepared BHAP without the decrease of selectivity towards Pb ions.

Effect of experimental variables onto Co(2+) and Sr(2+) sorption behavior in red mud-water suspensions.

The prospects of rinsed red mud (alumina production residue) utilization for liquid radioactive waste treatment have been investigated, with Co(2+) and Sr(2+) as model cations of radioactive elements. To evaluate the sorption effectiveness and corresponding binding mechanisms, the process was analyzed in batch conditions, by varying experimental conditions (pH, Co(2+) and Sr(2+) concentrations in single solutions and binary mixtures, contact time, and the concentration of competing cations and ligands common in liquid radioactive waste). Comparison of the Co(2+) and Sr(2+) sorption pH edges with the red mud isoelectric point has revealed that Co(2+) removal took place at both positive and negative red mud surface, while Sr(2+) sorption abruptly increased when the surface became negatively charged. The increase of initial cation content and pH resulted in increased equilibrium times and sorption capacity and decreased rate constants. From single metal solutions and various binary mixtures, Co(2+) was sorbed more efficiently and selectively than Sr(2+). While Sr(2+) sorption was reduced by coexisting cations in the order Al(3+) ≥ Ca(2+) >Na(+) ≥Cs(+), removal of Co(2+) was affected by Al(3+) species and complexing agents (EDTA and citrate). Desorption of Co(2+) was negligible in Ca(2+) and Sr(2+) containing media and in solutions with initial pH 4-7. Sr(2+) desorption was generally more pronounced, especially at low pH and in the presence of Co(2+). Collected macroscopic data signify that Co(2+) sorption by red mud minerals occurred via strong chemical bonds, while Sr(2+) was retained mainly by weaker ion-exchange or electrostatic interactions. Results indicate that the rinsed red mud represent an efficient, low-cost sorbent for Co(2+) and Sr(2+) immobilization.