Surface wipe sampling for antineoplastic (chemotherapy) and other hazardous drug residue in healthcare settings: Methodology and recommendations.

Surface wipe sampling for various hazardous agents has been employed in many occupational settings over the years for various reasons such as evaluation of potential dermal exposure and health risk, source determination, quality or cleanliness, compliance, and others. Wipe sampling for surface residue of antineoplastic and other hazardous drugs in healthcare settings is currently the method of choice to determine surface contamination of the workplace with these drugs. The purpose of this article is to review published studies of wipe sampling for antineoplastic and other hazardous drugs, to summarize the methods in use by various organizations and researchers, and to provide some basic guidance for conducting surface wipe sampling for these drugs in healthcare settings. Recommendations on wipe sampling methodology from several government agencies and organizations were reviewed. Published reports on wipe sampling for hazardous drugs in numerous studies were also examined. The critical elements of a wipe sampling program and related limitations were reviewed and summarized. Recommendations and guidance are presented concerning the purposes of wipe sampling for antineoplastic and other hazardous drugs in the healthcare setting, technical factors and variables, sampling strategy, materials required, and limitations. The reporting and interpretation of wipe sample results is also discussed. It is recommended that all healthcare settings where antineoplastic and other hazardous drugs are handled consider wipe sampling as part of a comprehensive hazardous drug "safe handling" program. Although no standards exist for acceptable or allowable surface concentrations for these drugs in the healthcare setting, wipe sampling may be used as a method to characterize potential occupational dermal exposure risk and to evaluate the effectiveness of implemented controls and the overall safety program. A comprehensive safe-handling program for antineoplastic drugs may utilize wipe sampling as a screening tool to evaluate environmental contamination and strive to reduce contamination levels as much as possible, using the industrial hygiene hierarchy of controls.

Airborne asbestos take-home exposures during handling of chrysotile-contaminated clothing following simulated full shift workplace exposures.

The potential for para-occupational, domestic, or take-home exposures from asbestos-contaminated work clothing has been acknowledged for decades, but historically has not been quantitatively well characterized. A simulation study was performed to measure airborne chrysotile concentrations associated with laundering of contaminated clothing worn during a full shift work day. Work clothing fitted onto mannequins was exposed for 6.5 h to an airborne concentration of 11.4 f/cc (PCME) of chrysotile asbestos, and was subsequently handled and shaken. Mean 5-min and 15-min concentrations during active clothes handling and shake-out were 3.2 f/cc and 2.9 f/cc, respectively (PCME). Mean airborne PCME concentrations decreased by 55% 15 min after clothes handling ceased, and by 85% after 30 min. PCM concentrations during clothes handling were 11-47% greater than PCME concentrations. Consistent with previously published data, daily mean 8-h TWA airborne concentrations for clothes-handling activity were approximately 1.0% of workplace concentrations. Similarly, weekly 40-h TWAs for clothes handling were approximately 0.20% of workplace concentrations. Estimated take-home cumulative exposure estimates for weekly clothes handling over 25-year working durations were below 1 f/cc-year for handling work clothes contaminated in an occupational environment with full shift airborne chrysotile concentrations of up to 9 f/cc (8-h TWA).

Evaluation of surface contamination with cyclophosphamide following simulated hazardous drug preparation activities using two closed-system products.

PURPOSE: A preliminary investigation was conducted to evaluate and compare the effectiveness of two closed-system products in preventing contamination of typical pharmacy workplace surfaces with cyclophosphamide during simulated hazardous drug preparation activities in a controlled laboratory setting. METHODS: Two separate trials simulating hazardous drug compounding using cyclophosphamide were performed with two different closed-system products. Prior to each trial, work area surfaces of the biological safety cabinet (BSC) workbench, the BSC airfoil and front grill, and the floor below the BSC were cleaned, and wipe samples were collected and analyzed to determine, if present, levels of cyclophosphamide. Following each trial, wipe samples were collected from the work area surfaces to determine the hazardous drug containment effectiveness of each closed-system product. RESULTS: Cyclophosphamide was not detected on work area surfaces prior to each trial. Low levels were detected on the BSC workbench surface following both trials. DISCUSSION: Based on the limited number of samples obtained during this preliminary study and the determination of the presence of the chemical of interest on the drug vials, no statistical evaluation was performed to compare the relative effectiveness of the two systems tested. Work practices and procedures regarding product operation may affect hazardous drug containment and worker safety. Further study and statistical analyses are needed.