Tough Multimaterial Interfaces through Wavelength-Selective 3D Printing.

Strong and well-engineered interfaces between dissimilar materials are a hallmark of natural systems but have proven difficult to emulate in synthetic materials, where interfaces often act as points of failure. In this work, curing reactions that are triggered by exposure to different wavelengths of visible light are used to produce multimaterial objects with tough, well-defined interfaces between chemically distinct domains. Longer-wavelength (green) light selectively initiates acrylate-based radical polymerization, while shorter-wavelength (blue) light results in the simultaneous formation of epoxy and acrylate networks through orthogonal cationic and radical processes. The improved mechanical strength of these interfaces is hypothesized to arise from a continuous acrylate network that bridges domains. Using printed test structures, interfaces were characterized through spatial resolution of their chemical composition, localized mechanical properties, and bulk fracture strength. This wavelength-selective photocuring of interpenetrating polymer networks is a promising strategy for increasing the mechanical performance of 3D-printed objects and expanding light-based additive manufacturing technologies.

Solution Mask Liquid Lithography (SMaLL) for One-Step, Multimaterial 3D Printing.

A novel methodology for printing 3D objects with spatially resolved mechanical and chemical properties is reported. Photochromic molecules are used to control polymerization through coherent bleaching fronts, providing large depths of cure and rapid build rates without the need for moving parts. The coupling of these photoswitches with resin mixtures containing orthogonal photo-crosslinking systems allows simultaneous and selective curing of multiple networks, providing access to 3D objects with chemically and mechanically distinct domains. The power of this approach is showcased through the one-step fabrication of bioinspired soft joints and mechanically reinforced "brick-and-mortar" structures.

Insight into 3D micro-CT data: exploring segmentation algorithms through performance metrics.

Three-dimensional (3D) micro-tomography (µ-CT) has proven to be an important imaging modality in industry and scientific domains. Understanding the properties of material structure and behavior has produced many scientific advances. An important component of the 3D µ-CT pipeline is image partitioning (or image segmentation), a step that is used to separate various phases or components in an image. Image partitioning schemes require specific rules for different scientific fields, but a common strategy consists of devising metrics to quantify performance and accuracy. The present article proposes a set of protocols to systematically analyze and compare the results of unsupervised classification methods used for segmentation of synchrotron-based data. The proposed dataflow for Materials Segmentation and Metrics (MSM) provides 3D micro-tomography image segmentation algorithms, such as statistical region merging (SRM), k-means algorithm and parallel Markov random field (PMRF), while offering different metrics to evaluate segmentation quality, confidence and conformity with standards. Both experimental and synthetic data are assessed, illustrating quantitative results through the MSM dashboard, which can return sample information such as media porosity and permeability. The main contributions of this work are: (i) to deliver tools to improve material design and quality control; (ii) to provide datasets for benchmarking and reproducibility; (iii) to yield good practices in the absence of standards or ground-truth for ceramic composite analysis.

High-temperature materials testing with full-field strain measurement: experimental design and practice.

Experimental characterization of the thermomechanical response of ceramic composites at very high temperatures is plagued by challenges associated with imaging and strain measurement. The problems involve illumination, heat haze, and surface contrast. Techniques that address these challenges have been developed and implemented in a laser heating facility, enabling non-contact strain measurement via digital image correlation. The thermomechanical characterization of both a Ni-based superalloy and a C/SiC composite are used to demonstrate the efficacy of experimental practices in realizing such measurements at temperatures up to 1500 °C.

The tissue diagnostic instrument.

Tissue mechanical properties reflect extracellular matrix composition and organization, and as such, their changes can be a signature of disease. Examples of such diseases include intervertebral disk degeneration, cancer, atherosclerosis, osteoarthritis, osteoporosis, and tooth decay. Here we introduce the tissue diagnostic instrument (TDI), a device designed to probe the mechanical properties of normal and diseased soft and hard tissues not only in the laboratory but also in patients. The TDI can distinguish between the nucleus and the annulus of spinal disks, between young and degenerated cartilage, and between normal and cancerous mammary glands. It can quantify the elastic modulus and hardness of the wet dentin left in a cavity after excavation. It can perform an indentation test of bone tissue, quantifying the indentation depth increase and other mechanical parameters. With local anesthesia and disposable, sterile, probe assemblies, there has been neither pain nor complications in tests on patients. We anticipate that this unique device will facilitate research on many tissue systems in living organisms, including plants, leading to new insights into disease mechanisms and methods for their early detection.

Metals and the integrity of a biological coating: the cuticle of mussel byssus.

The cuticle of mussel byssal threads is a robust natural coating that combines high extensibility with high stiffness and hardness. In this study, fluorescence microscopy and elemental analysis were exploited to show that the 3,4-dihydroxyphenyl-L-alanine (dopa) residues of mussel foot protein-1 colocalize with Fe and Ca distributions in the cuticle of Mytilus galloprovincialis mussel byssal threads. Chelated removal of Fe and Ca from the cuticle of intact threads resulted in a 50% reduction in cuticle hardness, and thin sections subjected to the same treatment showed a disruption of cuticle integrity. Dopa-metal complexes may provide significant interactions for the integrity of composite cuticles deformed under tension.

The transition from stiff to compliant materials in squid beaks.

The beak of the Humboldt squid Dosidicus gigas represents one of the hardest and stiffest wholly organic materials known. As it is deeply embedded within the soft buccal envelope, the manner in which impact forces are transmitted between beak and envelope is a matter of considerable scientific interest. Here, we show that the hydrated beak exhibits a large stiffness gradient, spanning two orders of magnitude from the tip to the base. This gradient is correlated with a chemical gradient involving mixtures of chitin, water, and His-rich proteins that contain 3,4-dihydroxyphenyl-L-alanine (dopa) and undergo extensive stabilization by histidyl-dopa cross-link formation. These findings may serve as a foundation for identifying design principles for attaching mechanically mismatched materials in engineering and biological applications.

Effects of hydration on mechanical properties of a highly sclerotized tissue.

The jaws of the bloodworm Glycera dibranchiata consist principally of protein and melanin scaffolds with small amounts of unmineralized copper (Cu) and mineralized atacamite (Cu(2)Cl(OH)(3)) fibers in distinct regions. Remarkably, when tested in air, the regions containing unmineralized Cu are the hardest, stiffest, and most abrasion resistant. To establish the functions of jaw constituents in physiologically relevant environments, this study examines the effects of hydration on their response to indentation, scratching, and wear. Although all jaw regions are degraded by the presence of water, the ones containing unmineralized Cu are affected least. Notably, scratch depths in the bulk and the atacamite-containing regions double when wet, whereas the corresponding increase in the regions with unmineralized Cu is approximately 20%. The results support the view that Cu ions are involved in the formation of intermolecular coordination complexes, creating a cross-linked molecular network that is both mechanically robust and resistant to water ingress. Hydration effects are greatest during wear testing, rates of material removal in water being about three times those in air. The mechanism underlying accelerated wear is suspected to involve coupled effects of near-surface damage and enhanced water ingress, resulting in increased plasticization and susceptibility to plastic plowing.

A nonmineralized approach to abrasion-resistant biomaterials.

The tooth-like mouthparts of some animals consist of biomacromolecular scaffolds with few mineral components, making them intriguing paradigms of biostructural materials. In this study, the abrasion resistance of the jaws of one such animal, the bloodworm Glycera dibranchiata, has been evaluated by nanoindentation, nanoscratching, and wear testing. The hardest, stiffest, and most abrasion-resistant materials are found within a thin (<3 microm) surface layer near the jaw tip and a thicker (10-20 microm) subsurface layer, both rich in unmineralized Cu. These results are consistent with the supposition that Cu ions are involved in the formation of intermolecular coordination complexes between proteins, creating a highly cross-linked molecular network. The intervening layer contains aligned atacamite [Cu(2)(OH)(3)Cl] fibers and exhibits hardness and stiffness (transverse to the alignment direction) that are only slightly higher than those of the bulk material but lower than those of the two Cu-rich layers. Furthermore, the atacamite-containing layer is the least abrasion-resistant, by a factor of approximately 3, even relative to the bulk material. These observations are broadly consistent with the behavior of engineering polymer composites with hard fiber or particulate reinforcements. The alignment of fibers parallel to the jaw surface, and the fiber proximity to the surface, are both suggestive of a natural adaptation to enhance bending stiffness and strength rather than to endow the surface regions with enhanced abrasion resistance.

Protective coatings on extensible biofibres.

Formulating effective coatings for use in nano- and biotechnology poses considerable technical challenges. If they are to provide abrasion resistance, coatings must be hard and adhere well to the underlying substrate. High hardness, however, comes at the expense of extensibility. This property trade-off makes the design of coatings for even moderately compliant substrates problematic, because substrate deformation easily exceeds the strain limit of the coating. Although the highest strain capacity of synthetic fibre coatings is less than 10%, deformable coatings are ubiquitous in biological systems. With an eye to heeding the lessons of nature, the cuticular coatings of byssal threads from two species of marine mussels, Mytilus galloprovincialis and Perna canaliculus, have been investigated. Consistent with their function to protect collagenous fibres in the byssal-thread core, these coatings show hardness and stiffness comparable to those of engineering plastics and yet are surprisingly extensible; the tensile failure strain of P. canaliculus cuticle is about 30% and that of M. galloprovincialis is a remarkable 70%. The difference in extensibility is attributable to the presence of deformable microphase-separated granules within the cuticle of M. galloprovincialis. The results have important implications in the design of bio-inspired extensible coatings.

Mineral minimization in nature's alternative teeth.

Contrary to conventional wisdom, mineralization is not the only strategy evolved for the formation of hard, stiff materials. Indeed, the sclerotized mouthparts of marine invertebrates exhibit Young's modulus and hardness approaching 10 and 1 GPa, respectively, with little to no help from mineralization. Based on biochemical analyses, three of these mouthparts, the jaws of glycerid and nereid polychaetes and a squid beak, reveal a largely organic composition dominated by glycine- and histidine-rich proteins. Despite the well-known metal ion binding by the imidazole side-chain of histidine and the suggestion that this interaction provides mechanical support in nereid jaws, there is at present no universal molecular explanation for the relationship of histidine to mechanical properties in these sclerotized structures.

Hierarchical assembly of the siliceous skeletal lattice of the hexactinellid sponge Euplectella aspergillum.

Despite its inherent mechanical fragility, silica is widely used as a skeletal material in a great diversity of organisms ranging from diatoms and radiolaria to sponges and higher plants. In addition to their micro- and nanoscale structural regularity, many of these hard tissues form complex hierarchically ordered composites. One such example is found in the siliceous skeletal system of the Western Pacific hexactinellid sponge, Euplectella aspergillum. In this species, the skeleton comprises an elaborate cylindrical lattice-like structure with at least six hierarchical levels spanning the length scale from nanometers to centimeters. The basic building blocks are laminated skeletal elements (spicules) that consist of a central proteinaceous axial filament surrounded by alternating concentric domains of consolidated silica nanoparticles and organic interlayers. Two intersecting grids of non-planar cruciform spicules define a locally quadrate, globally cylindrical skeletal lattice that provides the framework onto which other skeletal constituents are deposited. The grids are supported by bundles of spicules that form vertical, horizontal and diagonally ordered struts. The overall cylindrical lattice is capped at its upper end by a terminal sieve plate and rooted into the sea floor at its base by a flexible cluster of barbed fibrillar anchor spicules. External diagonally oriented spiral ridges that extend perpendicular to the surface further strengthen the lattice. A secondarily deposited laminated silica matrix that cements the structure together additionally reinforces the resulting skeletal mass. The mechanical consequences of each of these various levels of structural complexity are discussed.

Jumbo squid beaks: inspiration for design of robust organic composites.

The hard tissues found in some invertebrate marine organisms represent intriguing paradigms for robust, lightweight materials. The present study focuses on one such tissue: that comprising the beak of the jumbo squid (Dosidicus gigas). Its main constituents are chitin fibers (15-20wt.%) and histidine- and glycine-rich proteins (40-45%). Notably absent are mineral phases, metals and halogens. Despite being fully organic, beak hardness and stiffness are at least twice those of the most competitive synthetic organic materials (notably engineering polymers) and comparable to those of Glycera and Nereis jaws. Furthermore, the combination of hardness and stiffness makes the beaks more resistant to plastic deformation when in contact with blunt abrasives than virtually all metals and polymers. The 3,4-dihydroxy-l-phenylalanine and abundant histidine content in the beak proteins as well as the pigmented hydrolysis-resistant residue are suggestive of aromatic cross-linking. A high cross-linking density between the proteins and chitin may be the single most important determinant of hardness and stiffness in the beak. Beak microstructure is characterized by a lamellar arrangement of the constituents, with a weak interface that promotes crack deflection and endows the structure with high fracture toughness. The susceptibility of this microstructure to cracking along these interfaces from contact stresses at the external surface is mitigated by the presence of a protective coating.

Critical role of zinc in hardening of Nereis jaws.

Hardening of invertebrate jaws and mandibles has been previously correlated to diverse, potentially complex modifications. Here we demonstrate directly, for the first time, that Zn plays a critical role in the mechanical properties of histidine-rich Nereis jaws. Using nanoindentation, we show that removal of Zn by chelation decreases both hardness and modulus by over 65%. Moreover, reconstitution of Zn yields a substantial recovery of initial properties. Modulus and hardness of Zn-replete jaws exceed those attainable by current engineering polymers by a factor of >3. Zn-mediated histidine cross-links are proposed to account for this enhancement in mechanical properties.

Halogenated veneers: protein cross-linking and halogenation in the jaws of nereis, a marine polychaete worm.

Mineralized tissues are produced by most living organisms for load and impact functions. In contrast, the jaws of the clam worm, Nereis, are hard without mineralization. However, they are peculiarly rich in halogens, which are associated with a variety of post-translationally modified amino acids, many of which are multiply halogenated by chlorine, bromine, and/or iodine. Several of these modified amino acids, namely dibromohistidine, bromoiodohistidine, chloroiodotyrosine, bromoiodotyrosine, chlorodityrosine, chlorotrityrosine, chlorobromotrityrosine, and bromoiodotrityrosine, have not been previously reported. We have found that the distributions of Cl, Br, and I differ: Cl is widespread whereas Br and I, although not colocalized, are concentrated in proximity to the external jaw surfaces. By using nanoindentation, we show that Br and I are unlikely to play a purely mechanical role, but that the local Zn and Cl concentrations and jaw microstructure are the prime determinants of local jaw hardness. Several of the post-translationally modified amino acids are akin to those found in various sclerotized structures of invertebrates, and we propose that they are part of a cross-linked protein casing.