9-Trifluoromethylxanthenediols: Synthesis and Supramolecular Motifs.

The synthesis of four derivatives and the single-crystal X-ray structures of six 9-trifluoromethylxanthenediols (TFXdiols) I-VI are analyzed in this work. These compounds were obtained through superacid-catalyzed condensation of dihydroxybenzenes with 1,1,1-trifluoroacetone or 2,2,2-trifluoroacetophenone. The title molecules have a convex molecular structure due to their three fused rings of the xanthene moiety. We have found that, similar to resorcinol, the configuration of the hydroxyl groups is of great relevance for the crystal packing favoring either interactions above and below their molecular plane or lateral interactions that create layers. Considering that reports of TFXdiols are very scarce, our findings contribute to a better understanding of the molecular conformation and intermolecular interactions in their crystal structures. A similar analysis was extended to a fortuitous cocrystal obtained between 9-trifluoromethyl-9-(4'-fluorophenyl)-xanthenediol and 1,4-dihydroxybenzene, showing that these structures might be used to obtain cocrystals in the future.

Spontaneous, Solvent-Free, Polymer-Templated, Solid-Solid Transformation of Thin Metal Films into Nanoparticles.

Metal nanoparticles have unusual optical, electronic, sensing, recognition, catalytic, and therapeutic properties. They are expected to form the basis of many of the technological and biological innovations of this century. A prerequisite for future applications using nanoparticles as functional entities is control of the shape, size, and homogeneity of these nanoparticles and of their interparticle spacing and arrangement on surfaces, between electrodes, or in devices. Here, we demonstrate that thin films of gold, silver, and copper sputter-deposited onto the surface of an organic polymer poly[[1,1':4',1″-terphenyl]-4,4″-diyl(2-bromo-1-carboxyethylidene)] (PTBC) undergo spontaneous solid-solid transformation into nanoparticles. Furthermore, we show that, by varying the thickness of the films, the volume-to-surface ratio of the polymer substrate, and the amount of plasticizer, it is possible to control the rate of transformation and the morphology of the nanoparticles formed. PTBC containing Au nanoparticles was found to enhance the cell adhesion and proliferation. To the best of our knowledge, our findings constitute the first experimental evidence of spontaneous, room-temperature, solid-solid transformation of metal films sputtered onto the surface of an organic polymeric substrate into nanoparticles (crystals).

Light Emission Properties of a Cross-Conjugated Fluorene Polymer: Demonstration of Its Use in Electro-Luminescence and Lasing Devices.

Light emission properties of a fluorene cross-conjugated polymer (PF⁻1) based on the monomer 4,7-bis[2-(9,9-dimethyl)fluorenyl] benzo[1,2,5]thiadiazole are reported. This polymer exhibits solubility at high concentrations, good processability into thin solid films of good quality and a broad emission band with a fluorescence quantum yield of approximately 1. Based on these features, in this paper we implemented the use of PF⁻1 as an active layer in polymer light-emitting diodes (PLEDs) and as a laser gain medium in solution. To get insight on the conducting properties of PF⁻1, two different electron injectors, poly [(9,9-bis(3'-(N,N-dimethylamino) propyl)-2,7-fluorene)-alt-2,7-(9,9⁻dioctylfluorene)] (PFN) and lithium fluoride (LiF), were used in a simple PLED architecture. PLEDs with the PFN film were found to exhibit better performance with a maximum luminous efficiency of 40 cd/A, a turn-on voltage (Von) of approximately 4.5 V and a luminance maximum of 878 cd/m² at 5.5 V, with a current density of 20 A/m². For the lasing properties of PF⁻1, we found a lasing threshold of around 75 µJ and a tunability of 20 nm. These values are comparable with those of rhodamine 6G, a well-known laser dye.

Linear, Single-Strand Heteroaromatic Polymers from Superacid-Catalyzed Step-Growth Polymerization of Ketones with Bisphenols.

Novel, linear, high-molecular-weight single-strand heteroaromatic polymers and copolymers containing 9H-xanthene moieties in the backbone were synthesized by metal-free superacid-catalyzed stoichiometric and nonstoichiometric step-growth polymerizations of carbonyl compounds bearing electron-withdrawing substituents with bisphenols. The electrophilic aromatic substitution reactions of ketones with phenol fragments occur exclusively in ortho-positions to the hydroxy phenol group and followed by highly efficient cyclodehydration reaction of hydroxyl-containing intermediates to give corresponding substituted 9H-xanthene-2,7-diyl polymers. The polymerizations were performed at room temperature in the Brønsted superacid trifluoromethanesulfonic acid (CF3SO3H, TFSA) and in a mixture of TFSA with methylene chloride and nitrobenzene.

Mechanistic aspects of superacid mediated condensation of polyphenols with ketones. Implications for polymer synthesis.

A detailed computational study of possible reaction paths for methanesulfonic and triflic acid mediated polyhydroxyalkylation reaction between resorcinol and trifluoracetone accompanied by cyclodehydration to give 9H-xanthene containing polymers has been carried out at M06-2X/6-311+G level of theory. A cluster solvation model was used for the calculations. The calculations revealed that the most kinetically favorable reaction path involves the cyclodehydration occurring during the polymer forming step. In this case 9H-xanthene formation is promoted by the activated phenyl ring in Wheland intermediate assisting the aromatic nucleophilic substitution of OH group which leads to the cyclization. It has been demonstrated that the inability of methanesulfonic acid to catalyze the formation of 9H-xanthene containing polymers is due to the very high barrier of the rate limiting step of the polymer forming reaction and not the cyclodehydration process.

Reactions of ketones with aromatics in acid media. The effect of trifluoromethyl groups and the acidity media. A theoretical study.

The reactions of acetone, 2,2,2-trifluoroacetone and hexafluoroacetone in methanesulfonic (MSA) and triflic acids (TFSA) with benzene have been studied at M06-2X/6-311+G(d,p) level using cluster-continuum model, where the carbonyl group is explicitly solvated by acid molecules. The introduction of a trifluoromethyl group into the ketone structure reduces the activation energy of the tetrahedral intermediates formation due to an increase of the electrophilicity of the carbonyl group and raises the activation and the reaction energies of the C-O bond cleavage in formed carbinol due to the destabilization of the corresponding carbocation. The introduction of the second trifluoromethyl group inhibits the hydroxyalkylation reaction due to a very strong increase of the reaction and activation energies of the C-O bond cleavage which becomes the rate determining step. The most important catalytic effect of TFSA compared to MSA is not the protonation of the ketone carbonyl, but the reduction of the activation and reaction energies of the carbinol C-O bond cleavage due to better protosolvation properties. Even for TFSA no complete proton transfer to carbonyl oxygen has been observed for free ketones. Therefore, the protonation energies of free ketones cannot be considered as a measure of ketone reactivity in the hydroxyalkylation reaction.

Two-photon excited fluorescence of silica nanoparticles loaded with a fluorene-based monomer and its cross-conjugated polymer: their application to cell imaging.

In this work the two-photon activity of nanoparticles obtained from a fluorene monomer (M1) and its cross-conjugated polymer (P1) is reported. Aqueous suspensions of M1 and P1 nanoparticles prepared through the reprecipitation method exhibited maximum two-photon absorption (TPA) cross-sections of 84 and 9860 GM (1 GM = 10(-50) cm(4) s) at 740 nm, respectively, and a fluorescence quantum yield of ~1. Such a two-photon activity was practically equal with respect to that for molecular solutions of M1 and P1. These materials were then successfully encapsulated into silica nanoparticles to provide bio-compatibly. A lung cancer cell line (A549) and a human cervical cancer cell line (HeLa cells) were incubated with our fluorescent silica nanoparticles to carry out two-photon imaging. By means of these studies we demonstrate that optimized nonlinear optical polymers loaded in silica nanoparticles can be used as efficient probes with low cytotoxicity and good photostability for two-photon fluorescence microscopy. To the best of our knowledge, studies concerning polymer-doped silica nanoparticles exhibiting large two-photon activity have not been reported in the literature.

Non-stoichiometric polycondensations and the synthesis of high molar mass polycondensates.

This report presents a general overview of non-stoichiometric step-growth polymerizations (polycondensations). Three kinds of non-stoichiometric polycondensations are defined and discussed for a(2) + b(2) monomer combinations. Depending on the kinetic scenario and on the experimental conditions, the excess of one monomer either strongly reduces or strongly enhances the average degree of polymerization (DP) relative to a stoichiometric polycondensation under identical conditions. As a result, telechelic oligomers or extremely high molar mass polymers (DPs > 1000) may be formed. Stoichiometric imbalance has in all cases the consequence that cyclization is largely suppressed in early stages of a polycondensation. Finally, non- stoichiometric "a(2) + b(n) " polycondensations are discussed.

"Russian doll" complexes of [n]cycloparaphenylenes: a theoretical study.

The formation of "Russian doll" complexes consisting of [n]cycloparaphenylenes was predicted using quantum chemistry tools. The electronic structures of multiple inclusion complexes containing up to four macrocycles were explored at the M06-2X/6-31G* level of theory. The binding energy between the macrocycles increases from the center to the periphery of the complex and can be >60 kcal mol(-1) for macrocycles containing 14 and 19 repeating units. It has been demonstrated that additional electrostatic interactions originating from the asymmetric electron density distribution observed when comparing the concave and convex macrocycle sides are responsible for the high binding energies in these Russian doll complexes. Oxidation or reduction of the Russian doll complexes creates polarons that are delocalized across the complexes. In the case of polaron cations, most of the polarons are localized at the macrocycle with the smallest ionization potential; for polaron anions, the negative charge is localized across the outer rings of the complex. Because anion polarons are more delocalized than cation polarons, the relaxation energies of the polaron anions were found to be smaller than those of the polaron cations.

Use of 4-piperidones in one-pot syntheses of novel, high-molecular-weight linear and virtually 100%-hyperbranched polymers.

4-Piperidone and 4-alkyl piperidones react selectively with aromatic hydrocarbons in a mixture of trifluoromethanesulfonic acid (TFSA) and CH(2)Cl(2) to give linear polymers, while N-(2-phenethyl)piperidone undergoes self-polymerization to yield virtually 100%-hyperbranched polymer.

Stacking of main chain-crown ether polymers in thin films.

Thin films (9-70 nm) of a series of polymers containing in the main chain dibenzo-18-crown-6 ether unit (DB18C6) linked to an aliphatic spacer of different length (10C and 14C) and nature have been prepared, from chloroform solutions, by spin coating on a silicon substrate. The quality and homogeneity of the polymer coatings was revealed by their reflectivity spectra and atomic force microscopy (AFM). The grazing incidence small-angle X-ray scattering (GISAXS) patterns show an out-of-plane structure correlation (interference maximum near the horizon) of scale size related to the polymer repeating unit length. Above this Bragg reflection, the shape of the scattering observed, in the GISAXS pattern, reveals an orientation of the stacked molecular columns in the coated polymer. A thermal treatment of the samples improves the nanostructure by increasing the lamellar coherence size (in y-direction) as well as the vertical orientation of the molecular columns.