Dynamic Light Scattering Plus Scanning Electron Microscopy: Usefulness and Limitations of a Simplified Estimation of Nanocellulose Dimensions.

Measurements of nanocellulose size usually demand very high-resolution techniques and tedious image processing, mainly in what pertains to the length of nanofibers. Aiming to ease the process, this work assesses a relatively simple method to estimate the dimensions of nanocellulose particles with an aspect ratio greater than 1. Nanocellulose suspensions, both as nanofibers and as nanocrystals, are subjected to dynamic light scattering (DLS) and to field-emission scanning electron microscopy (FE-SEM). The former provides the hydrodynamic diameter, as long as the scatter angle and the consistency are adequate. Assays with different angles and concentrations compel us to recommend forward scattering (12.8°) and concentrations around 0.05-0.10 wt %. Then, FE-SEM with magnifications of ×5000-×20,000 generally suffices to obtain an acceptable approximation for the actual diameter, at least for bundles. Finally, length can be estimated by a simple geometric relationship. Regardless of whether they are collected from FE-SEM or DLS, size distributions are generally skewed to lower diameters. Width distributions from FE-SEM, in particular, are well fitted to log-normal functions. Overall, while this method is not valid for the thinnest fibrils or for single, small nanocrystals, it can be useful in lieu of very high-resolution techniques.

Remote Spatiotemporal Control of a Magnetic and Electroconductive Hydrogel Network via Magnetic Fields for Soft Electronic Applications.

Multifunctional hydrogels are a class of materials offering new opportunities for interfacing living organisms with machines due to their mechanical compliance, biocompatibility, and capacity to be triggered by external stimuli. Here, we report a dual magnetic- and electric-stimuli-responsive hydrogel with the capacity to be disassembled and reassembled up to three times through reversible cross-links. This allows its use as an electronic device (e.g., temperature sensor) in the cross-linked state and spatiotemporal control through narrow channels in the disassembled state via the application of magnetic fields, followed by reassembly. The hydrogel consists of an interpenetrated polymer network of alginate (Alg) and poly(3,4-ethylenedioxythiophene) (PEDOT), which imparts mechanical and electrical properties, respectively. In addition, the incorporation of magnetite nanoparticles (Fe3O4 NPs) endows the hydrogel with magnetic properties. After structural, (electro)chemical, and physical characterization, we successfully performed dynamic and continuous transport of the hydrogel through disassembly, transporting the polymer-Fe3O4 NP aggregates toward a target using magnetic fields and its final reassembly to recover the multifunctional hydrogel in the cross-linked state. We also successfully tested the PEDOT/Alg/Fe3O4 NP hydrogel for temperature sensing and magnetic hyperthermia after various disassembly/re-cross-linking cycles. The present methodology can pave the way to a new generation of soft electronic devices with the capacity to be remotely transported.

Liquid Crystalline Properties of Symmetric and Asymmetric End-Grafted Cellulose Nanocrystals.

The hydrophilic polymer poly[2-(2-(2-methoxy ethoxy)ethoxy)ethylacrylate] (POEG3A) was grafted onto the reducing end-groups (REGs) of cellulose nanocrystal (CNC) allomorphs, and their liquid crystalline properties were investigated. The REGs on CNCs extracted from cellulose I (CNC-I) are exclusively located at one end of the crystallite, whereas CNCs extracted from cellulose II (CNC-II) feature REGs at both ends of the crystallite, so that grafting from the REGs affords asymmetrically and symmetrically decorated CNCs, respectively. To confirm the REG modification, several complementary analytical techniques were applied. The grafting of POEG3A onto the CNC REGs was evidenced by Fourier transform infrared spectroscopy, atomic force microscopy, and the coil-globule conformational transition of this polymer above 60 °C, i.e., its lower critical solution temperature. Furthermore, we investigated the self-assembly of end-tethered CNC-hybrids into chiral nematic liquid crystalline phases. Above a critical concentration, both end-grafted CNC allomorphs form chiral nematic tactoids. The introduction of POEG3A to CNC-I does not disturb the surface of the CNCs along the rods, allowing the modified CNCs to approach each other and form helicoidal textures. End-grafted CNC-II formed chiral nematic tactoids with a pitch observable by polarized optical microscopy. This is likely due to their increase in hydrodynamic radius or the introduced steric stabilization of the end-grafted polymer.

Challenges in Synthesis and Analysis of Asymmetrically Grafted Cellulose Nanocrystals via Atom Transfer Radical Polymerization.

When cellulose nanocrystals (CNCs) are isolated from cellulose microfibrils, the parallel arrangement of the cellulose chains in the crystalline domains is retained so that all reducing end-groups (REGs) point to one crystallite end. This permits the selective chemical modification of one end of the CNCs. In this study, two reaction pathways are compared to selectively attach atom-transfer radical polymerization (ATRP) initiators to the REGs of CNCs, using reductive amination. This modification further enabled the site-specific grafting of the anionic polyelectrolyte poly(sodium 4-styrenesulfonate) (PSS) from the CNCs. Different analytical methods, including colorimetry and solution-state NMR analysis, were combined to confirm the REG-modification with ATRP-initiators and PSS. The achieved grafting yield was low due to either a limited conversion of the CNC REGs or side reactions on the polymerization initiator during the reductive amination. The end-tethered CNCs were easy to redisperse in water after freeze-drying, and the shear birefringence of colloidal suspensions is maintained after this process.

Asymmetric water transport in dense leaf cuticles and cuticle-inspired compositionally graded membranes.

Most of the aerial organs of vascular plants are covered by a protective layer known as the cuticle, the main purpose of which is to limit transpirational water loss. Cuticles consist of an amphiphilic polyester matrix, polar polysaccharides that extend from the underlying epidermal cell wall and become less prominent towards the exterior, and hydrophobic waxes that dominate the surface. Here we report that the polarity gradient caused by this architecture renders the transport of water through astomatous olive and ivy leaf cuticles directional and that the permeation is regulated by the hydration level of the cutin-rich outer cuticular layer. We further report artificial nanocomposite membranes that are inspired by the cuticles' compositionally graded architecture and consist of hydrophilic cellulose nanocrystals and a hydrophobic polymer. The structure and composition of these cuticle-inspired membranes can easily be varied and this enables a systematic investigation of the water transport mechanism.

Chemical Modification of Reducing End-Groups in Cellulose Nanocrystals.

Native plant cellulose has an intrinsic supramolecular structure. Consequently, it can be isolated as nanocellulose species, which can be utilized as building blocks for renewable nanomaterials. The structure of cellulose also permits its end-wise modification, i.e., chemical reactions exclusively on one end of a cellulose chain or a nanocellulose particle. The premises for end-wise modification have been known for decades. Nevertheless, different approaches for the reactions have emerged only recently, because of formidable synthetic and analytical challenges associated with the issue, including the adverse reactivity of the cellulose reducing end and the low abundance of newly introduced functionalities. This Review gives a full account of the scientific underpinnings and challenges related to end-wise modification of cellulose nanocrystals. Furthermore, we present how the chemical modification of cellulose nanocrystal ends may be applied to directed assembly, resulting in numerous possibilities for the construction of new materials, such as responsive liquid crystal templates and composites with tailored interactions.

Correction: Patience is a virtue: self-assembly and physico-chemical properties of cellulose nanocrystal allomorphs.

Correction for 'Patience is a virtue: self-assembly and physico-chemical properties of cellulose nanocrystal allomorphs' by Gwendoline Delepierre, et al., Nanoscale, 2020, 12, 17480-17493, DOI: 10.1039/d0nr04491a.

Patience is a virtue: self-assembly and physico-chemical properties of cellulose nanocrystal allomorphs.

Cellulose nanocrystals (CNCs) are bio-based rod-like nanoparticles with a quickly expanding market. Despite the fact that a variety of production routes and starting cellulose sources are employed, all industrially produced CNCs consist of cellulose I (CNC-I), the native crystalline allomorph of cellulose. Here a comparative study of the physico-chemical properties and liquid crystalline behavior of CNCs produced from cellulose II (CNC-II) and typical CNC-I is reported. CNC-I and CNC-II are isolated by sulfuric acid hydrolysis of cotton and mercerized cotton, respectively. The two allomorphs display similar surface charge densities and ζ-potentials and both have a right-handed twist, but CNC-II have a slightly smaller average length and aspect ratio, and are less hygroscopic. Interestingly, the self-assembly behavior of CNC-I and CNC-II in water is different. Whilst CNC-I forms a chiral nematic phase, CNC-II initially phase separates into an upper isotropic and a lower nematic liquid crystalline phase, before a slow reorganization into a large-pitch chiral nematic texture occurs. This is potentially caused by a combination of factors, including the inferred faster rotational diffusion of CNC-II and the different crystal structures of CNC-I and CNC-II, which are responsible for the presence and absence of a giant dipole moment, respectively.

Stiffness-Changing of Polymer Nanocomposites with Cellulose Nanocrystals and Polymeric Dispersant.

Bio-inspired, water-responsive, mechanically adaptive nanocomposites are reported based on cellulose nanocrystals (CNCs), poly(ethylene oxide-co-epichlorohydrin) (EO-EPI), and a small amount of poly(vinyl alcohol) (PVA), which is added to aid the dispersion of the CNCs. In the dry state, the CNCs form a reinforcing network within the polymer matrix, and the substantial stiffness increase relative to the neat polymer is thought to be the result of hydrogen-bonding interactions between the nanocrystals. Exposure to water, however, causes a large stiffness reduction, due to competitive hydrogen bonding of water molecules and the CNCs. It is shown here that the addition of PVA to the EO-EPI/CNC nanocomposite increases the modulus difference between the dry and the wet state by a factor of up to four compared to the nanocomposites without the PVA. The main reason is that the PVA leads to a substantial increase of the stiffness in the dry state; for example, the storage modulus E ' increased from 2.7 MPa (neat EO-EPI) to 50 MPa upon introduction of 10% CNCs, and to 200 MPa when additionally 5% of PVA was added. By contrast, the incorporation of PVA only led to moderate increases of the equilibrium water swelling and the E ' in the wet state.

Bio-Inspired, Self-Toughening Polymers Enabled by Plasticizer-Releasing Microcapsules.

A new concept for the design of self-toughening thermoplastic polymers is presented. The approach involves the incorporation of plasticizer-filled microcapsules (MCs) in an intrinsically rigid and brittle matrix polymer. The intriguing adaptability that this simple tactic enables is demonstrated with composites composed of a poly(lactic acid) (PLA) matrix and 5-20% w/w poly(urea-formaldehyde) (PUF) MCs that contained hexyl acetate as plasticizer. At low strain (<1.5%), the glassy PLA/MC composites remain rigid, although the intact MCs reduce the Young's modulus and tensile strength by up to 50%. While the neat PLA shows brittle failure at a strain of around 2.5%, the composites yield in this regime, because the MCs rupture and release their plasticizing cargo. This effect leads up to 25-fold increase of the elongation at break and 20-fold increase of the toughness vis-à-vis the neat PLA, while the impact on modulus and ultimate stress is much smaller. Ballistic impact tests show that the self-toughening mechanism also works at much higher strain rates than applied in tensile tests and the operating mechanism is corroborated through systematic thermomechanical studies that involved dynamic mechanical testing and thermal analysis.

Thermally Switchable Liquid Crystals Based on Cellulose Nanocrystals with Patchy Polymer Grafts.

A thermally "switchable" liquid-crystalline (LC) phase is observed in aqueous suspensions of cellulose nanocrystals (CNCs) featuring patchy grafts of the thermoresponsive polymer poly(N-isopropylacrylamide) (PNIPAM). "Patchy" polymer decoration of the CNCs is achieved by preferential attachment of an atom transfer radical polymerization (ATRP) initiator to the ends of the rods and subsequent surface-initiated ATRP. The patchy PNIPAM-grafted CNCs display a higher colloidal stability above the lower critical solution temperature (LCST) of PNIPAM than CNCs decorated with PNIPAM in a brush-like manner. A 10 wt% suspension of the "patchy" PNIPAM-modified CNCs displays birefringence at room temperature, indicating the presence of an LC phase. When heated above the LCST of PNIPAM, the birefringence disappears, indicating the transition to an isotropic phase. This switching is reversible and appears to be driven by the collapse of the PNIPAM chains above the LCST, causing a reduction of the rods' packing density and an increase in translational and rotational freedom. Suspensions of the "brush" PNIPAM-modified CNCs display a different behavior. Heating above the LCST causes phase separation, likely because the chain collapse renders the particles more hydrophobic. The thermal switching observed for the "patchy" PNIPAM-modified CNCs is unprecedented and possibly useful for sensing and smart packaging applications.

Cellulose Nanocrystals: Surface Modification, Applications and Opportunities at Interfaces.

Cellulose nanocrystals (CNCs) are rod-like nano-scale particles that are widely available in nature and have recently gained great interest in both research and industry, due to their high strength, high crystallinity, high surface area, low density, biodegradability and low toxicity. CNCs can be easily extracted from natural cellulose sources and are broadly useful, for example in polymer reinforcement, paper manufacturing, and rheology modification. The high density of functional groups on the surface of CNCs allows various chemical surface modifications, which permit tuning the properties of CNCs over a wide range. This review gives a brief overview of surface chemical modification of CNCs, focusing especially on those often utilized for our own research, which focuses on some of the most prominent areas of interests of CNCs, notably polymer reinforcement, healable polymers, stimuli-responsive nanohybrids, Pickering emulsion stabilizers, viral inhibitors, and cholesteric liquid crystal assemblies.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes.

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Cellulose Nanocrystals with Tethered Polymer Chains: Chemically Patchy versus Uniform Decoration.

The site-specific surface modification of colloidal substrates, yielding "patchy" nanoparticles, is a rapidly expanding area of research as a result of the new complex structural hierarchies that are becoming accessible to chemists and materials scientists through colloidal self-assembly. The inherent directionality of cellulose chains, which feature a nonreducing and a reducing end, within individual cellulose nanocrystals (CNCs) renders them an interesting experimental platform for the synthesis of asymmetric nanorods with end-tethered polymer chains. Here, we present water-tolerant reaction pathways toward patchy and uniformly modified CNC hybrids based on atom transfer radical polymerization (ATRP) and initiators that were linked to the CNCs with carbodiimide-mediated coupling and Fischer esterification, respectively. Various monomers, including N-isopropylacrylamide (NIPAM), [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC), and sodium 4-vinylbenzenesulfonate (4-SS), were polymerized from both types of initiator-modified CNCs, yielding chemically patchy and uniform CNC hybrids, via surface-initiated ATRP (SI-ATRP). Interestingly, the stereochemistry of tethered PNIPAM was affected by the precise location of ATRP initiating sites, as evidenced by 1H NMR and circular dichroism (CD) spectroscopy. This effect may be related to the inherent right-handed chirality of CNCs. CNC/PMETAC hybrids were labeled with gold nanoparticles (AuNPs) in order to visualize the precise location of polymer tethers via cryo-electron microscopy. In some instances, the AuNPs were indeed concentrated at the end groups of the patchy CNC hybrids.

Effect of Surface Charge on Surface-Initiated Atom Transfer Radical Polymerization from Cellulose Nanocrystals in Aqueous Media.

Cellulose nanocrystals (CNCs) with different charge densities were utilized to examine the role of electrostatic interactions on surface-initiated atom transfer radical polymerization (SI-ATRP) in aqueous media. To this end, growth of hydrophilic uncharged poly(N,N-dimethylacrylamide) (PDMAM) brushes was monitored by electrophoresis, (1)H NMR spectroscopy, and dynamic light scattering (DLS). Molecular weight and polydispersity of PDMAM brushes was determined by GPC analysis of hydrolytically cleaved polymers. Initiator and polymer brush grafting densities, and thus, initiator efficiencies were derived from elemental analysis. Higher initiator efficiency of polymer brush growth was observed for CNCs with higher anionic surface sulfate half-ester group density, but at the expense of high polydispersity caused by inefficient deactivation. PDMAM grafts with number-average molecular weights up to 530 kDa and polydispersity indices <1.5 were obtained under highly diluted monomer concentrations. The role of surface chemistry on the growth of neutral polymer brushes from CNCs in water is emphasized and a model of the interfacial region at the onset of polymerization is proposed. The results presented here could have implications for other substrates that present surface charges and for the assumption that the kinetics of Cu-mediated SI-CRP are analogous to those conducted in solution.

Continuous propionic acid production with Propionibacterium acidipropionici immobilized in a novel xylan hydrogel matrix.

The cell immobilization potential of a novel xylan based disulfide-crosslinked hydrogel matrix reinforced with cellulose nanocrystals was studied with continuous cultivation of Propionibacterium acidipropionici using various dilution rates. The cells were immobilized to hydrogel beads suspended freely in the fermentation broth or else packed into a column connected to a stirred tank reactor. The maximum propionic acid productivity for the combined stirred tank and column was 0.88gL(-1)h(-1) and the maximum productivity for the column was determined to be 1.39gL(-1)h(-1). The maximum propionic acid titer for the combined system was 13.9gL(-1) with a dilution rate of 0.06h(-1). Dry cell density of 99.7gL(-1) was obtained within the column packed with hydrogel beads and productivity of 1.02gL(-1)h(-1) was maintained in the column even with the high circulation rate of 3.37h(-1).