Skin decontamination efficacy of potassium ketoxime on rabbits exposed to sulfur mustard.

CONTEXT: The chemical weapon sulfur mustard (SM) is a blister agent, and currently, there is no effective antidote. OBJECTIVE: To evaluate the decontamination efficacy of potassium ketoxime against SM and preliminarily elucidate its decontamination mechanism. MATERIALS AND METHODS: Potassium ketoxime reacted with SM, and SM residues were tested at different time intervals by T-135 colorimetry after the reaction. Rabbit skin was topically exposed to 2 mg/cm(2) SM, treated with potassium ketoxime 1 min later, and observed after 6, 12, and 24 h. Gas chromatography-mass spectroscopy was employed to screen and identify the main products of potassium ketoxime decontamination of SM. RESULTS: Potassium ketoxime had a great effect against SM contamination. With a mass ratio of decontaminant: SM of 50:1, decontamination rates against SM were 87.5% after 30 s, 95.9% after 1 min, and 99.0% after 5 min. Fifteen minutes after exposure to SM, the untreated group showed clear erythema lesions, whereas the experimental group showed no clear erythema lesions within 6 h. After 12 and 24 h, the areas of damaged skin in the experimental group were 0.038 and 0.125 cm(2), respectively, compared with 2.21 and 2.65 cm(2) in the control group. Histopathological analysis revealed that treatment with potassium ketoxime also reduced inflammation-induced damage. CONCLUSION: The results of this study indicate that potassium ketoxime reacted rapidly and completely with SM, and thus, it was found to be a suitable and effective skin decontaminant against SM. The decontamination reaction mechanism is mainly related to nucleophilic substitution.

DNA probe functionalized QCM biosensor based on gold nanoparticle amplification for Bacillus anthracis detection.

The rapid detection of Bacillus anthracis, the causative agent of anthrax disease, has gained much attention since the anthrax spore bioterrorism attacks in the United States in 2001. In this work, a DNA probe functionalized quartz crystal microbalance (QCM) biosensor was developed to detect B. anthracis based on the recognition of its specific DNA sequences, i.e., the 168 bp fragment of the Ba813 gene in chromosomes and the 340 bp fragment of the pag gene in plasmid pXO1. A thiol DNA probe was immobilized onto the QCM gold surface through self-assembly via Au-S bond formation to hybridize with the target ss-DNA sequence obtained by asymmetric PCR. Hybridization between the target DNA and the DNA probe resulted in an increase in mass and a decrease in the resonance frequency of the QCM biosensor. Moreover, to amplify the signal, a thiol-DNA fragment complementary to the other end of the target DNA was functionalized with gold nanoparticles. The results indicate that the DNA probe functionalized QCM biosensor could specifically recognize the target DNA fragment of B. anthracis from that of its closest species, such as Bacillus thuringiensis, and that the limit of detection (LOD) reached 3.5 × 10(2)CFU/ml of B. anthracis vegetative cells just after asymmetric PCR amplification, but without culture enrichment. The DNA probe functionalized QCM biosensor demonstrated stable, pollution-free, real-time sensing, and could find application in the rapid detection of B. anthracis.

Transportation of sulfur mustard (HD) in alkyd coating.

The kinetics of absorption, desorption, and degradation of sulfur mustard (HD) in alkyd coating was experimentally studied, and a one-dimension mass transfer model for the transportation of HD molecule in alkyd coating was established on the experimental data. The obtained results indicated that the persistence of HD molecule could be greatly increased due to the absorption of HD droplets by alkyd coating, and there still occurred the desorption of HD as vapor from coating for more than 3 days even after decontamination of HD droplets onto coating. It was also experimentally shown that the majority of HD both absorbed and desorbed was accomplished at an early stage, less than 10 h, and HD molecule was able to be degraded within the alkyd coating probably through the reactions of hydrolysis and elimination. The diffusion coefficient and degradation rate constant of HD in alkyd coating were determined to be practically around 10(-9) cm2/s and 2.4 x 10(-5) min(-1), respectively.

Study on photocatalytic degradation of several volatile organic compounds.

The gas-phase photolytic and photocatalytic reactions of several aromatics and chlorohydrocarbons were investigated. The experimental results revealed that chlorohydrocarbons like trichloroethylene, dichloromethane and chloroform could be degraded through either photolysis or photocatalysis under irradiation of germicidal lamp, and the elimination rate of chlorohydrocarbons through photolysis was quicker than that through photocatalysis. UV light from a germicidal lamp could directly lead to degradation of toluene but could hardly act on benzene. The photodegradation rate for these volatile organic compounds (VOCs) through photolysis followed an order: trichloroethylene>chloroform>dichloromethane>toluene>benzene>carbon tetrachloride, and through photocatalysis followed: trichloroethylene>chloroform>toluene>dichloromethane>benzene>carbon tetrachloride. Besides, a series of modified TiO2 photocatalysts were prepared by depositing noble metal, doping with transition metal ion, recombining with metal oxides and modifying with super strong acid. Activity of these catalysts was examined upon photocatalytic degradation of benzene as a typical compound that was hard to be degraded. It indicated that these modification methods could promote the activity of TiO2 catalyst to different extent. The apparent zero-order reaction rate constant for degrading benzene over SnO2/TiO2 catalyst had the highest value, which was nearly three times as that over P25 TiO2. But it simultaneously had the lowest rate for mineralizing the objective compound. In spite that Fe3+/TiO2 catalyst behaved slightly less active than SnO2/TiO2 for degradation of benzene, the mineralization rate over Fe3+/TiO2 was the highest one among the prepared catalysts.

Photoassisted reaction of sulfur mustard under UV light irradiation.

The photoassisted reaction of sulfur mustard (HD) in both the vapor and droplet states under UV light irradiation was investigated. It was found that HD molecules in either the gas or the condensed phase could be easily converted into other chemicals under the irradiation of a germicidal lamp. The products detected upon reaction suggested that the photoassisted reaction of HD molecules in the gas phase produced a kind of nontoxic heavy polymer, and this method seemed to be applicable for decontamination of air. Nevertheless, the photoassisted reaction of HD droplets would produce a series of products containing -SCH2CH2Cl or -OCH2CH2CI groups, some of which were proven to be even more toxic than HD. Therefore, it was not an effective method forthe decontamination of HD droplets. The obtained experimental results would indicate that two possible pathways might be involved in the destruction of HD molecules: (1) HD molecules may undergo a photochemical reaction upon absorbing photons of sufficient energy, which leads to cleavage the C-S bond in HD molecules at the primary step, or (2) HD molecules could be oxidized by the photogenerated ozone.

Photoassisted reaction of chemical warfare agent VX droplets under UV light irradiation.

A photoassisted reaction of O-ethyl S-[2-(diisopropylamino) ethyl] methylphosphonothioate (VX) droplets in air was carried out. The experimental results indicated that VX droplets could be easily and chemically transformed into other compounds under irradiation of a germicidal lamp over sufficient time. Quantum chemical calculation results demonstrated that UV light less than 278 nm wavelength could possibly initiate photoreaction of VX and that both P-S and P=O bonds in the VX molecule were lengthened. The identification of reaction products by gas and liquid chromatography mass spectroscopy and NMR revealed that the VX molecule in air under UV light irradiation could undergo isomerization of S-esters to O-esters, cleavage of P-S, S-C, and C-N bonds, and ozonation of tertiary amines.