Bi-C monolayer as a promising 2D anode material for Li, Na, and K-ion batteries.

Electrode materials with high electrochemical efficiency are required for battery technology that can be used to store renewable energy. Bismuth (Bi) has shown great potential as an electrode material for metal ion batteries due to its large volumetric capacity and reasonable operating potential. However, the cycling performance deteriorates due to the drastic volume changes that occur during alloying and dealloying. Herein, we design a 2D Bi-C metal sheet using density functional theory and investigate the feasibility of this nanosheet for alkali metal ion batteries. The predicted metallic Bi-C monolayer (ML) are highly stable and show sound electrode performance. Moreover, alkali metal atoms exhibit high diffusivities on both sides (Bi and C sides) with low energy barriers of 0.252/0.201, 0.217/0.169, and 0.179/0.136 eV for Li, Na, and K ions, respectively. Furthermore, the Bi-C ML shows high theoretical storage capacities of (485 mA h g-1) for Li and Na and (364 mA h g-1) for K and low open-circuit voltage of 0.12, 0.24, and 0.32 V for Li, Na, and K ions, respectively. These exciting findings show that the predicted Bi-C ML can be used as an anode material for Li-, Na- and K-ion batteries.

Ultrathin SmCo5 nanoflakes with high-coercivity prepared by solid particle (NaCl) and surfactant co-assisted ball milling.

The ultrathin SmCo5 nanoflakes with average thickness smaller than 50 nm are prepared by a novel method of solid particle (NaCl) and surfactant co-assisted ball milling. The as-prepared nanoflakes exhibit a narrower thickness distribution of 10-50 nm and high coercivity of 23 kOe. The possible formation mechanism of nanoflakes are proposed. Temperature dependence of demagnetization curves indicate that the magnetization reversal may be controlled by both nucleation and pinning. The results of X-ray powder diffraction and magnetic measurement for aligned SmCo5 nanoflakes resin composite indicate that the nanoflakes have a high texture degree. The ultrathin thickness and high coercivity are beneficial for preparing the high performance soft/hard coupling magnets and nanocomposite magnets.

Giant barocaloric effect in hexagonal Ni2In-type Mn-Co-Ge-In compounds around room temperature.

The most widespread cooling techniques based on gas compression/expansion encounter environmental problems. Thus, tremendous effort has been dedicated to develop alternative cooling technique and search for solid state materials that show large caloric effects. An application of pressure to a material can cause a change in temperature, which is called the barocaloric effect. Here we report the giant barocaloric effect in a hexagonal Ni2In-type MnCoGe0.99In0.01 compound involving magnetostructural transformation, Tmstr, which is accompanied with a big difference in the internal energy due to a great negative lattice expansion(ΔV/V ~ 3.9%). High resolution neutron diffraction experiments reveal that the hydrostatic pressure can push the Tmstr to a lower temperature at a rate of 7.7 K/kbar, resulting in a giant barocaloric effect. The entropy change under a moderate pressure of 3 kbar reaches 52 J kg(-1) K(-1), which exceeds that of most materials, including the reported giant magnetocaloric effect driven by 5 T magnetic field that is available only by superconducting magnets.

Strong textured SmCo5 nanoflakes with ultrahigh coercivity prepared by multistep (three steps) surfactant-assisted ball milling.

The high coercivity of 26.2 kOe for SmCo5 nanoflakes are obtained by multistep (three steps) surfactant-assisted ball milling. The magnetic properties, phase structure and morphology are studied by VSM, XRD and SEM, respectively. The results demonstrate that the three step ball-milling can keep more complete crystallinity (relatively less defects) during the process of milling compared with one step high energy ball-milling, which enhances the texture degree and coercivity. In addition, the mechanism of coercivity are also studied by the temperature dependence of demagnetization curves for aligned SmCo5 nanoflakes/resin composite, the result indicates that the magnetization reversal could be controlled by co-existed mechanisms of pinning and nucleation.

Giant negative thermal expansion in bonded MnCoGe-based compounds with Ni2In-type hexagonal structure.

MnCoGe-based compounds undergo a giant negative thermal expansion (NTE) during the martensitic structural transition from Ni2In-type hexagonal to TiNiSi-type orthorhombic structure. High-resolution neutron diffraction experiments revealed that the expansion of unit cell volume can be as large as ΔV/V ∼ 3.9%. The optimized compositions with concurrent magnetic and structural transitions have been studied for magnetocaloric effect. However, these materials have not been considered as NTE materials partially due to the limited temperature window of phase transition. The as-prepared MnCoGe-based compounds are quite brittle and naturally collapse into powders. By using a few percents (3-4%) of epoxy to bond the powders, we introduced residual stress in the bonded samples and thus realized the broadening of structural transition by utilizing the specific characteristics of lattice softening enforced by the stress. As a result, giant NTE (not only the linear NTE coefficient α but also the operation-temperature window) has been achieved. For example, the average α̅ as much as -51.5 × 10(-6)/K with an operating temperature window as wide as 210 K from 122 to 332 K has been observed in a bonded MnCo0.98Cr0.02Ge compound. Moreover, in the region between 250 and 305 K near room temperature, the α value (-119 × 10(-6)/K) remains nearly independent of temperature. Such an excellent performance exceeds that of most other materials reported previously, suggesting it can potentially be used as a NTE material, particularly for compensating the materials with large positive thermal expansions.

Protective effect of lycopene on human spermatozoa during cryopreservation and its mechanism / 中华男科学杂志

<p><b>OBJECTIVE</b>To investigate the protective effect of lycopene against cryopreservation injury of post-thawing human sperm and its mechanism.</p><p><b>METHODS</b>Semen samples were collected from 25 volunteers, each sample equally divided into four parts to be cryopreserved with cryoprotectant only (Ly0 control) or cryoprotectant + lycopene at the concentrations of 2 (Ly2), 5 (Ly5), and 10 µmol/L (Ly10), respectively. Before and after thawing, the semen samples were subjected to computer-assisted semen analysis ( CASA) for sperm kinematics, flow cytometry for sperm apoptosis, thiobarbituric acid assay for malondialdehyde (MDA) concentration, and JC-1 fluorescent staining for the sperm mitochondrial membrane potential (MMP).</p><p><b>RESULTS</b>After cryopreservation, sperm motility was markedly decreased in all the groups (P < 0.01). The rate of sperm apoptosis was significantly lower in the Ly5 group than in the Ly0 control ([25.68 ± 4.36]% vs [33.26 ± 4.78]%, P < 0.05), while sperm MMP remarkably higher in the former than in the latter ([66.18 ± 14.23]% vs [55.24 ± 12.31]%, P < 0.05). The Ly2, Ly5 and Ly10 groups showed no statistically significance differences in the MDA level from the Ly0 control (P > 0.05).</p><p><b>CONCLUSION</b>Addition of lycopene at a proper concentration to cryoprotectant may reduce oxidative damage to sperm mitochondria in the freezing-thawing process, attenuate oxidative stress injury induced by reactive oxygen species to sperm plasma membrane, and improve the anti-apoptosis ability of sperm.</p>