Upgrading end-of-line residues of the red seaweed Gelidium sesquipedale to polyhydroxyalkanoates using Halomonas boliviensis.

Agar extraction from Gelidium and Gracilaria red seaweed species produces hundred thousand ton of carbohydrate-rich residues annually. Gelidium sesquipedale waste biomass obtained after agar extraction, still contained 44.2 % w/w total carbohydrates (dry-weight basis). These residues were biologically up-graded to poly-3-hydroxybutyrate (P3HB) after saccharification of their carbohydrate fraction to simple sugars. A combined hydrolysis treatment using sulfamic acid followed by enzymatic hydrolysis with cellulases produced a glucose-rich hydrolysate with a negligible content of inhibitors. With this treatment a sugar yield of circa 30 % (g glucose/g biomass) was attained. The algal hydrolysates were assessed as carbon source for the production of P3HB by the halotolerant bacteria Halomonas boliviensis. A cell concentration of 8.3 g L-1 containing 41 % (w/w) of polymer and a yield (YP/S ) of 0.16 gpolymer/gglucose were attained in shake flask assays. In this work, cellulose-rich seaweed waste was shown to be an upgradable, sustainable source of carbohydrates.

Feeding strategies for tuning poly (3-hydroxybutyrate-co-4-hydroxybutyrate) monomeric composition and productivity using Burkholderia sacchari.

Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P(3HB-4HB)) co-polymers were produced at bench-scale in fed-batch cultivations by Burkholderia sacchari from glucose (main carbon-source) and gamma-butyrolactone (GBL) as co-substrate. As P(3HB-4HB) properties highly depend on the 4-hydroxybutyrate (4HB) molar fraction, it is advantageous to have a thorough knowledge of the process in order to promote the production of the targeted final product. In this work, polymers with a 4HB molar percentage ranging from 1.5 to 8.4% (mol/mol) were obtained as consequence of a fine tuning of the fed-batch operation conditions, namely regarding the co-substrate feeding rate and its addition time, as GBL is toxic to B. sacchari cells. The best results regarding both the 4HB incorporation (molar%) and the co-polymer productivity (7.1% and 1.1g/(L.h) respectively) were reached when a pulse of GBL (<10g/L) was added early in the accumulation phase followed by a constant GBL addition at a rate similar to that of consumption so that a steady co-substrate concentration in the medium was maintained.

Polyhydroxyalkanoates: waste glycerol upgrade into electrospun fibrous scaffolds for stem cells culture.

This integrated study shows that waste glycerol can be bio-valorized by the fabrication of electrospun scaffolds for stem cells. Human mesenchymal stem cells (hMSC) provide an interesting model of regenerating cells because of their ability to differentiate into osteo-, chrondro-, adipo- and myogenic lineages. Moreover, hMSC have modulatory properties with potential on treatment of immunologic diseases. Electrospun fiber meshes offer tunable mechanical and physical properties that can mimic the structure of the native extracellular matrix, the natural environment where cells inhabit. Following a biorefinery approach, crude glycerol directly recovered from a biodiesel post-reaction stream was fed as major C source to Cupriavidus necator DSM 545 to produce polyhydroxyalkanoates at polymer titers of 9-25g/L. Two of the P(3HB-4HB-3HV) terpolymers produced, one containing 11.4% 4HB and 3.5% 3HV and the other containing 35.6% 4HB and 3.4% 3HV, were electrospun into fibers of average diameters of 600 and 1400nm, respectively. hMSC were cultured for 7 days in both fiber meshes, showing their ability to support stem cell growth at acceptable proliferation levels. Comparative results clearly demonstrate that scaffold topology is critical, with electrospun PHA fibers succeeding on the support of significant cell adhesion and proliferation, where planar PHA films failed.

On the heterogeneous composition of bacterial polyhydroxyalkanoate terpolymers.

Poly(3-hydroxybutyrate-4-hydroxybutyrate-3-hydroxyvalerate) (P(3HB-4HB-3HV)) terpolymers of low 3-hydroxyvalerate (3HV) content (1.7-6.4%) with 4-hydroxybutyrate (4HB) molar fractions from 1.8% to 35.6% were produced by fed-batch cultivation of Cupriavidus necator DSM545. Waste glycerol, γ-butyrolactone and propionic acid were used as main carbon source, 4HB and 3HV precursors, respectively. Uniaxial tensile tests were performed on the corresponding biopolymers. The Young's modulus and tensile strength of P(3HB-4HB-3HV) decreased, whereas the elongation at break increased with the 4HB molar%, following the general trend described for poly(3-hydroxybutyrate-4-hydroxybutyrate) (P(3HB-4HB)) but with pronounced lower elasticity. Differential scanning calorimetry results indicate that the temperature of crystallization and enthalpy of melting decreased as the 4HB% increased. No crystallization was observed in terpolymers containing more than 30% of heteromonomers (4HB and 3HV) even though multiple melting events were detected. Terpolymer fractions of different composition were obtained by solvent-fractionation of the original bacterial terpolymers.

Effect of cultivation parameters on the production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) and poly(3-hydroxybutyrate-4-hydroxybutyrate-3-hydroxyvalerate) by Cupriavidus necator using waste glycerol.

Short-chain polyhydroxyalkanoate co-polymers (poly(3-hydroxybutyrate-co-4-hydroxybutyrate)) (P(3HB-co-4HB)) and terpolymers (poly(3-hydroxybutyrate-4-hydroxybutyrate-3-hydroxyvalerate)) (P(3HB-4HB-3HV)) were produced using high-cell density fed-batch cultures of Cupriavidus necator DSM 545. C-source for growth and 3HB synthesis was waste glycerol (GRP) from a biodiesel plant. Incorporation of 4HB monomers was promoted by γ-butyrolactone (GBL). Propionic acid (PA), a stimulator of 4HB accumulation, increased the 4HB molar ratio 2-fold, but also acted as 3HV precursor, yielding P(3HB-4HB-3HV). Dissolved oxygen (DOC) was a key parameter for % PHA accumulation and volumetric productivity (Prod(vol)). 4HB molar ratio increased in the presence of PA and with extended accumulation time. By manipulating DOC and cultivation time, P(3HB-4HB) with between 11.4 and 21.5 molar% of 4HB were attained. Similarly, P(3HB-4HB-3HV) was obtained with 4HB molar% between 24.8% and 43.6% and 3HV% from 5.6% to 9.8%. Mw varied between 5.5 × 10(5) and 1.37 × 10(6)Da. PHA production from GRP helps reducing production costs with concomitant GRP valorization.

Behaviour of Mycobacterium sp. NRRL B-3805 whole cells in aqueous, organic-aqueous and organic media studied by fluorescence microscopy.

The present work aimed at quantifying the viability and morphological changes occurring during the time course of the side-chain cleavage of beta-sitosterol, in aqueous, two-phase organic-aqueous and organic media by free resting cells of Mycobacterium sp. NRRL B-3805. The solvent used was bis(2-ethylhexyl) phthalate (BEHP). A 66.3% reduction in cell viability was observed after 24 h when the cells were incubated in phosphate buffer only, but the percentage of viable cells was constant thereafter. In biphasic systems with BEHP, cell viability was maintained at higher values in the first 48 h, during which complete degradation of substrate was achieved. The availability of oxygen, which should be higher in the biphasic system than in the aqueous system, and of a carbon and energy source, thus seem important for the cells to retain their viability. In biphasic systems, cells tended to shrink and decrease their surface roughness, i.e. to decrease their surface area, possibly as a way to protect themselves from mechanical stress due to the presence of organic-aqueous interfacial forces, which resulted in disaggregation of cell clusters. A method used to visualise BEHP droplets with a standard optical microscope showed that the cells adhered to the surface of the solvent droplets, but no cells were observed inside these. In pure BEHP medium, cells retained their viability level for at least 150 h, independently of a pre-incubation period, which did not seem to induce any adaptation effect. Solvent biocompatibility, higher oxygen availability and reduced interfacial stress could have contributed to this maintenance of viability.

Towards a cost effective strategy for cutinase production by a recombinant Saccharomyces cerevisiae: strain physiological aspects.

Although the physiology and metabolism of the growth of yeast strains has been extensively studied, many questions remain unanswered where the induced production of a recombinant protein is concerned. This work addresses the production of a Fusarium solani pisi cutinase by a recombinant Saccharomyces cerevisiae strain induced through the use of a galactose promoter. The strain is able to metabolise the inducer, galactose, which is a much more expensive carbon source than glucose. Both the transport of galactose into the cell-required for the induction of cutinase production-and galactose metabolism are highly repressed by glucose. Different fermentation strategies were tested and the culture behaviour was interpreted in view of the strain metabolism and physiology. A fed-batch fermentation with a mixed feed of glucose and galactose was carried out, during which simultaneous consumption of both hexoses was achieved, as long as the glucose concentration in the medium did not exceed 0.20 g/l. The costs, in terms of hexoses, incurred with this fermentation strategy were reduced to 23% of those resulting from a fermentation carried out using a more conventional strategy, namely a fed-batch fermentation with a feed of galactose.