Quantification of nitrogen compounds in diesel fuel samples by comprehensive two-dimensional gas chromatography coupled with quadrupole mass spectrometry.

Although several methods for the analysis of nitrogen compounds in diesel fuel have been described in the literature, the demand for rapid, sensitive, and robust analyses has increased in recent years. In this study, a comprehensive two-dimensional gas chromatographic method was developed for the identification and quantification of nitrogen compounds in diesel fuel samples. The quantification was performed using the standard addition method and the analysis was conducted using comprehensive two-dimensional gas chromatography coupled with fast quadrupole mass spectrometry. This study is the first to report quantification of nitrogen compounds in diesel fuel samples using the standard addition method without fractionation. This type of analysis was previously performed using many laborious separation steps, which can lead to errors and losses. The proposed method shows good linearity for target nitrogen compounds evaluated (m-toluidine, 4-ethylaniline, indole, 7-methylindole, 7-ethylindole, carbazole, isoquinoline, 4-methylquinoline, benzo[h]quinolone, and acridine) over a range from 0.05 to 2.0 mg/L, and limits of detection and quantification of <0.06 and 0.16 mg/L, respectively, for all nitrogen compounds studied.

Speciation of nitrogen-containing compounds in an unfractionated coal tar sample by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry.

Comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC/TOFMS) has shown great skill in analyzing complex mixtures such as fossil fuels, especially for compounds at low concentrations. The analysis of N-polyaromatic compounds (NPAC) in coal and crude oil is a great challenge for analytical chemistry due to its environmental and technological importance, and also its diversity of concentration in the matrix. This study is the first report in the applicability of GC×GC/TOFMS for detection of NPAC in a coal tar sample with no fractionation. Normally these compounds are analyzed after sample treatment, making the process expensive and time consuming. However, the higher separation power of GC×GC/TOFMS, compared to 1D-GC, produces cleaner mass spectra in complex samples, which helps in identification of analytes with no pre-fractionation. In this paper, the main objectives were to demonstrate the applicability of GC×GC/TOFMS in the speciation and separation between basic and neutral NPAC from coal tar sample derived from fast pyrolysis, without prior sample fractionation. The methodology used here consisted of chromatographic injection of the diluted sample using a conventional columns set and data analysis by ChromaTOF/Excel™ software. Some basic compounds (pyridines and quinolines) and neutral ones (carbazoles and indoles) were detected with good chromatographic separation and spectral similarity. Tools like spectral deconvolution, extracted ion chromatogram (EIC) and dispersion graphics allowed greater security on the identification and separation of NPAC in this complex sample of coal tar, with no pre-treatment.

Microscopic cleanliness evaluation of the apical root canal after using calcium hydroxide mixed with chlorhexidine, propylene glycol, or antibiotic paste.

This study evaluated cleaning of the dentinal wall after removal of different calcium hydroxide pastes. Sixty-eight single-rooted teeth were prepared using the step-back technique and randomly divided into 4 groups according to medication used: Ca(OH)2 with 0.2% chlorhexidine solution (Group 1), Ca(OH)2 with propylene glycol (Group 2), Ca(OH)2 with antibiotic paste (ciprofloxacin, metronidazole) and distilled water (Group 3), and Ca(OH)2 with antibiotic paste and propylene glycol (Group 4). The samples were stored at 37 °C and 100% relative humidity for 21 days. The medicaments were removed using 5 mL 1% NaOCl, instrumentation with master apical file, 5 mL 1% NaOCl, patency with the K-file #10, ultrasonic instrumentation, and 10 mL 17% EDTA-T. The specimens were analyzed using scanning electron microscopy and chemical analysis. The Kruskal-Wallis (α = 5%) test showed that were no differences between the experimental groups when comparing Ca(OH)2 removal (P = .0951). The chi-square test (α = 5%) indicated a predominance of Ca(OH)2 obstructing dental tubules in all groups. On the basis of the methodology applied, it was concluded that the apical dentine surface remained equally covered by Ca(OH)2, regardless of the vehicle used.