Comparative effectiveness of preemptive administration of ibuprofen and ibuprofen-arginine on the anesthetic success of inferior alveolar nerve block in teeth with symptomatic irreversible pulpitis - A double-blind randomized clinical trial.

OBJECTIVES: This study examined the impact of premedication with ibuprofen and ibuprofen-arginine and the influence of preoperative pain and anxiety on inferior alveolar nerve block (IANB) efficacy in cases of symptomatic irreversible pulpitis. MATERIALS AND METHODS: The study involved 150 SIP patients who were randomly assigned to receive ibuprofen (600 mg), ibuprofen-arginine (1,155 mg), or a placebo 30 min before IANB. Preoperative anxiety and pain levels were assessed using the Modified Dental Anxiety Scale and the Heft-Parker visual scale. IANB efficacy was determined by the absence of or mild pain during the procedure. Statistical analysis included chi-square, z-tests, Analysis of Variance, and Student's t tests. RESULTS: The ibuprofen and ibuprofen-arginine groups exhibited significantly higher IANB success rates (62% and 78%, respectively) compared to the placebo group (34%). However, no significant difference was observed between the ibuprofen and ibuprofen-arginine groups. Patients with successful IANB in the ibuprofen and ibuprofen-arginine groups displayed lower median anxiety scores (8) than those with failed blocks (15) and lower mean preoperative pain scores (118.3). CONCLUSION: In cases of symptomatic irreversible pulpitis the preemptive medication with ibuprofen-arginine effectively increased the efficacy of the inferior alveolar nerve block The inferior alveolar nerve block efficacy was influenced by preoperative anxiety levels and the intensity of pain. CLINICAL RELEVANCE: This research underscores the potential benefits of oral premedication with ibuprofen and ibuprofen-arginine in improving anesthesia outcomes in cases of symptomatic irreversible pulpitis.

Does irradiation of the tooth structure interfere with oxygen saturation measured by pulse oximetry?-An ex vivo laboratorial study.

The effect of tooth structure subjected to ionising radiation on oxygen saturation levels (SpO2 ) measured by pulse oximetry was investigated. Fifty-four extracted human third molars were sectioned mesiodistally. Pulse oximeter diodes were placed in prefabricated silicone moulds, secured on a vise with tooth surfaces placed between the diodes and the participant's finger, and SpO2 levels were measured. After that, the tooth surfaces were subjected to ionising radiation in fractionated doses of up to 70 Gy, and SpO2 was measured according to the protocol described. The Kolmogorov-Smirnov test was used for the analysis of normality of the quantitative variables, and Student's t-test compared mean SpO2 levels before and after irradiation. Mean SpO2 after irradiation was 94.6 ± 0.9%, without a statistically significant difference from SpO2 before irradiation, which was 94.7 ± 0.6%. Irradiation of the tooth structure did not interfere with SpO2 levels measured by pulse oximetry.

Comparative analysis of bond strength to root dentin and compression of bioceramic cements used in regenerative endodontic procedures.

OBJECTIVES: This study compared the Biodentine, MTA Repair HP, and Bio-C Repair bioceramics in terms of bond strength to dentin, failure mode, and compression. MATERIALS AND METHODS: Fifty-four slices obtained from the cervical third of 18 single-rooted human mandibular premolars were randomly distributed (n = 18). After insertion of the bioceramic materials, the push-out test was performed. The failure mode was analyzed using stereomicroscopy. Another set of cylindrically-shaped bioceramic samples (n = 10) was prepared for compressive strength testing. The normality of data distribution was analyzed using the Shapiro-Wilk test. The Kruskal-Wallis and Friedman tests were used for the push-out test data, while compressive strength was analyzed with analysis of variance and the Tukey test, considering a significance level of 0.05. RESULTS: Biodentine presented a higher median bond strength value (14.79 MPa) than MTA Repair HP (8.84 MPa) and Bio-C Repair (3.48 MPa), with a significant difference only between Biodentine and Bio-C Repair. In the Biodentine group, the most frequent failure mode was mixed (61%), while in the MTA Repair HP and Bio-C Repair groups, it was adhesive (94% and 72%, respectively). Biodentine showed greater resistance to compression (29.59 ± 8.47 MPa) than MTA Repair HP (18.68 ± 7.40 MPa) and Bio-C Repair (19.96 ± 3.96 MPa) (p < 0.05). CONCLUSIONS: Biodentine showed greater compressive strength than MTA Repair HP and Bio-C Repair, and greater bond strength than Bio-C Repair. The most frequent failure mode of Biodentine was mixed, while that of MTA Repair HP and Bio-C Repair was adhesive.

Correlation of Crown Angulation and Inclination Based on Occlusal, Camper's, and Frankfurt Planes Using Digital Models.

This study provided the measures of crown angulations and inclinations which were evaluated using 3D cephalometry. This study was conducted to demonstrate the relationship between the main planes : Camper's, Frankfurt, and occlusalplanes for guiding the positioning ofthe skull and orthodontic planning.

Working Length Determination Using Cone-Beam Computed Tomography, Periapical Radiography and Electronic Apex Locator in Teeth with Apical Periodontitis: A Clinical Study.

INTRODUCTION: The purpose of this clinical study was to compare the accuracy of working length (WL) determination using cone-beam computed tomography (CBCT), conventional periapical radiographies and electronic apex locator. METHODS AND MATERIALS: This study was conducted during root canal treatment of 19 patients with a total of 30 single-rooted teeth diagnosed with apical periodontitis. After taking the initial parallel periapical radiographies, the initial file was advanced into the canal until the WL was detected by the apex locator. Subsequently, the WL was measured and WL radiographies were taken with the file set in the canal. Afterwards, CBCT images were acquired. These three measurements were tabulated and compared and the data were analyzed using the Friedman test. The level of significance was set at 0.05. RESULTS: The mean values for WL determination by electronic apex locator, periapical radiograph and CBCT images were 22.25, 22.43 and 22.65, respectively which was not statistically significant (P>0.05). CONCLUSION: Working length determination using CBCT images was precise when compared to radiographic method and electronic apex locator.

Antibacterial Potential of 2.5% Sodium Hypochlorite in Distinct Irrigation Protocols on Enterococcus faecalis Biofilm.

OBJECTIVE: The aim of this study was to evaluate the effect of irrigation methods on antibacterial potential of 2.5% NaOCl on Enterococcus faecalis biofilm. MATERIALS AND METHODS: Enterococcus faecalis biofilms were prepared during 60 days on 48 human root canals and randomized into control and experimental groups using positive and negative pressure irrigation. Bacterial growth was analyzed using turbidity of culture medium followed by UV spectrophotometry, and scanning electron microscopy (SEM) analyses were performed. Mean and standard deviations were used for evaluate the mean optical densities associated to the number of bacteria present culture, and Scheirer-Ray-Hare (an extension of the Kruskal-Wallis test) and Tamhane test to analyze the SEM images in the groups and thirds. Significance was set at 5%. RESULTS: Enterococcus faecalis was still present after root canal cleaning regardless of irrigation methods or bacterial identification methods. CONCLUSION: Positive and negative pressure irrigation protocols using 2.5% NaOCl show a similar capacity to reduce E. faecalis in infected root canals.

Cone-beam computed tomography as a diagnostic method for determination of gingival thickness and distance between gingival margin and bone crest.

The objective of the present study was to assess cone-beam computed tomography (CBCT) as a diagnostic method for determination of gingival thickness (GT) and distance between gingival margin and vestibular (GMBC-V) and interproximal bone crests (GMBC-I). GT and GMBC-V were measured in 348 teeth and GMBC-I was measured in 377 tooth regions of 29 patients with gummy smile. GT was assessed using transgingival probing (TP), ultrasound (US), and CBCT, whereas GMBC-V and GMBC-I were assessed by transsurgical clinical evaluation (TCE) and CBCT. Statistical analyses used independent t-test, Pearson's correlation coefficient, and simple linear regression. Difference was observed for GT: between TP, CBCT, and US considering all teeth; between TP and CBCT and between TP and US in incisors and canines; between TP and US in premolars and first molars. TP presented the highest means for GT. Positive correlation and linear regression were observed between TP and CBCT, TP and US, and CBCT and US. Difference was observed for GMBC-V and GMBC-I using TCE and CBCT, considering all teeth. Correlation and linear regression results were significant for GMBC-V and GMBC-I in incisors, canines, and premolars. CBCT is an effective diagnostic method to visualize and measure GT, GMBC-V, and GMBC-I.

Chemical and structural characterization of glass ionomer cements indicated for atraumatic restorative treatment.

Glass ionomer cements (GICs) are restorative materials, which clinical use has increased significantly during the last decade. The aim of the present study was to analyze the chemical constitution and surface morphology of four glass ionomer cements: Maxxion R, VitroFill, Vidrion R and Vitremer. Twelve polyethylene tubes with an internal diameter of 3 and 3 mm in length were prepared, filled and then transferred to a chamber with 95% relative humidity and a temperature of 37°C. The surface morphology of the tested materials was examined by scanning electron microscopy (SEM) and main components were investigated by energy-dispersive X-ray microanalysis (EDX). Scanning electron microscopy revealed irregular and rough external surface. Cracking was not observed. The main constituents were found to be aluminum, silicon, calcium, sodium and fluoride. Phosphorus, sulfur and barium were only observed in Vidrion R, while chlorine were only observed in Maxxion R. Elemental mapping of the outer surface revealed high concentration of aluminum and silicon. Significant irregularities on the surface of the tested materials were observed. The chemical constitution of all GIC was similar.

Assessment of oxygen saturation in dental pulp of permanent teeth with periodontal disease.

INTRODUCTION: In individuals with periodontal disease, dental pulp status should be determined before a treatment plan is made. Pulse oximeters are promising diagnostic tools to evaluate pulp vascularization. This study used pulse oximetry to determine the level of oxygen saturation in dental pulp of intact permanent teeth with periodontal attachment loss (PAL) and gingival recession (GR) and to evaluate the correlation between periodontal disease and level of oxygen saturation in the pulp. METHODS: This study included 67 anterior teeth of 35 patients; all teeth showed intact crowns, PAL, a periodontal pocket (PP), and GR. The teeth underwent periodontal examination, cold and electric pulp testing, and pulse oximetry measurements. The Pearson correlation coefficient and a linear regression coefficient were calculated to evaluate the degree of correlation between periodontal disease markers (PAL, PP, and GR) and the level of oxygen saturation in dental pulp. These tests also evaluated possible associations between oxygen saturation and cold and electric pulp testing. RESULTS: PAL, PP, and GR had negative correlations with oxygen saturation in dental pulp. Conversely, no statistically significant association was found between oxygen saturation in dental pulp and the response to electric sensibility testing. CONCLUSIONS: Oxygen saturation was lower in the pulp of permanent teeth with PAL, PP, and GR, indicating that periodontal disease correlates with the level of oxygen saturation in the pulp.

The use of three-dimensional cephalometric references in dentoskeletal symmetry diagnosis.

OBJECTIVE: The aim of this study is to assess dentoskeletal symmetry in cone-beam computed tomography (CBCT) scans of Brazilian individuals with Angle Class I malocclusion. MATERIAL: A total of 47 patients (22 females and 25 males) aged between 11 and 16 years old (14 years) seen in a private radiology service (CIRO, Goiânia, GO, Brazil) were assessed. All CBCT scans were obtained from January, 2009 to December, 2010. Cephalometric measurements were taken by multiplanar reconstruction (axial, coronal and sagittal) using Vista Dent3DPro 2.0 (Dentsply GAC, New York, USA). Minimum, maximum, mean and standard deviation values were arranged in tables, and Student t-test was used to determine statistical significance (P < 0.05). RESULTS: Data were homogeneous, and differences between the right and left sides were not significant. CONCLUSIONS: Cephalometric measurements of Brazilian individuals with Angle Class I malocclusion can be used to establish facial symmetry and three-dimensional standard references which might be useful for orthodontic and surgical planning.

Long-term evaluation of apical root resorption after orthodontic treatment using periapical radiography and cone beam computed tomography.

OBJECTIVE: To evaluate the frequency of Apical Root Resorption (ARR) after orthodontic treatment at 52-288 months using periapical radiography (PR) and cone beam computed tomography (CBCT). METHODS: Radiographic images obtained from 58 patients, before (T1) and after orthodontic treatment (T2), and following 52-288 months of treatment were analyzed by three members of the Brazilian Board of Orthodontics. Apical structures were evaluated by PR images (T2 and T3), using Levander and Malmgren scores. The presence of ARR on CBCT images was detected only at T3. The Kolmogorov-Smirnov test was used for statistical analyses, and the level of significance was set at 5%. Kappa statistics determined interobserver agreement. RESULTS: The more frequent ARR were with scores 1 in T2 (51.6%) and T3 (53.1%), when evaluated by PR (p > 0.05). When compared the frequencies of ARR in T3 among PR and CBCT images, the differences were significant for maxillary and mandibular premolar groups, and for mandibular molar group (p > 0.05). The teeth with highest frequency of ARR presence using CBCT images were maxillary lateral incisors (94.5%) and mandibular central incisors (87.7%), while the premolars showed the lowest frequency. The CBCT images showed that the teeth involved in orthodontic treatment with extraction present higher ARR frequency (p < 0.05). CONCLUSIONS: PR showed more frequency of ARR in posterior teeth groups when compared with CBCT images. ARR did not change in long-term post treatment.

Three-dimensional image contribution for evaluation of operative procedural errors in endodontic therapy and dental implants.

Acceptable therapeutic protocol in dentistry depends on the outcomes obtained with follow up. Operative procedural errors (OPE) may occur and they represent risk factors able to compromise a tooth or a dental implant. The aim of this study was to detect the OPE in endodontically treated teeth and dental implants, using cone beam computed tomography (CBCT).Eight hundred and sixteen CBCT exams were performed between January 2009 and October 2010, and only those which presented endodontically treated teeth and/or dental implants were selected. The sample was as follows: 195 CBCT exams (n=200 teeth and 200 dental implants), 72 male, 123 female, with mean age of 51 years.In endodontically treated teeth, OPE included underfilling, overfilling, and root perforation; OPEin dental implants were thread exposures, contact with anatomical structures, and contact with adjacent teeth. Kolmogorov-Smirnov test was used for statistical analysis, with significance level set at α=0.05. Underfilling, overfilling, and root perforations were detected in 33.5%, 8% and 4.5% of the teeth, respectively. Dental implants with thread exposures, contact with important anatomical structures and contact with adjacent teeth were seen in 37.5%, 13% and 6.5% of the cases, respectively. OPE were detected in endodontically treated teeth and dental implants, and underfilling and thread exposures were the most frequent occurrences, respectively.

Effect of root canal filling materials on dimensions of cone-beam computed tomography images.

OBJECTIVE: To evaluate the discrepancy of root canal filling (RCF) measurements obtained from original root specimens and cone-beam computed tomography (CBCT) images. MATERIAL AND METHODS: Seventy-two human maxillary anterior teeth were prepared up to an ISO #50 K-File 1 mm short of the apical foramen. Thus, the teeth were randomly divided into 8 groups, according to the root canal filling material: Sealapex®, Sealapex®+gutta-percha points, Sealer 26®, Sealer 26®+gutta-percha points, AH PlusTM, AH PlusTM+gutta-percha points, Grossman Sealer, and Grossman Sealer+gutta-percha points. After root canal preparation and RCF, CBCT scans were acquired and the specimens were sectioned in axial, sagittal and coronal planes. The RCF measurements were obtained in different planes and thicknesses to determine the discrepancy between the original root specimens (using a digital caliper) and the CBCT images (using the scanner's proprietary software). One-way analysis of variance and Tukey tests were used for statistical analyses. The significance level was set at α=5%. RESULTS: Measurements of the different endodontic filling materials were 9% to 100% greater on the CBCT images than on the original root specimens. Greater RCF dimensions were found when only sealers were used, with statistically significant difference among the groups. CONCLUSIONS: RCF dimensions were greater on CBCT images than on the original root specimens, especially when only sealer was used.

Intraosseous lipoma in the periapical region of a maxillary third molar.

INTRODUCTION: Images of oral lesions can look so exceptionally similar that a diagnosis hypothesis could be difficult. Lesions mimicking apical periodontitis must be considered when making a differential diagnosis. Intraosseous lipoma is a rare benign tumor of low incidence among all bone tumors, and therefore few cases have been reported in the literature. METHODS AND RESULTS: A case of intraosseous lipoma associated with the distobuccal root of tooth #1 in a 39-year-old woman is described. The dental general practitioner did not perceive anything of note in terms of the radiographic aspect, so consequently the periapical lesion went unnoticed. However, after tooth extraction, a different feature was noticed in the surgical specimen. The lesion associated to the roots of tooth #1 was surrounded by soft tissue forming a fibrous capsule (10 mm in diameter). A histopathologic examination showed an area of bone of lamellar aspect surrounding a central area of fat tissue diagnosed as intraosseous lipoma. This type of lesion is asymptomatic, and its etiology is unclear. CONCLUSIONS: Intraosseous lipoma should be considered in the differential diagnosis of other jaw lesions. A histologic examination is mandatory for the diagnosis, because this lesion is characterized by bone of lamellar aspect surrounding a central area of fat tissue. The treatment chosen in this case was surgical excision, and the outcome was favorable.

A retrospective study of traumatic dental injuries in a Brazilian dental urgency service.

Epidemiologic aspects of traumatic dental injuries (TDI) were evaluated in the permanent dentition in a sample of 847 patients treated at the Dental Urgency Service of the Dental School of the Federal University of Goiás, Brazil, between May 2000 and May 2008. The statistical treatment analyzed data from frequency distribution and chi-square test. The level of significance was set at 5% for all analyses. The results showed a higher incident among males (610; 72.01%) with mean age of 6-10 year-old. Uncomplicated crown fracture (without pulp exposure) (502; 26.95%), avulsion (341; 18.30%) and complicated crown fracture (with pulp exposure) (330; 17.71%) were the most prevalent TDI. The prevalence of trauma throughout the years showed proportionality, being observed a larger number of cases between July and September (249; 29.39%). The most affected teeth were the maxillary central incisors (65.65%), followed by the maxillary left lateral incisors (19.67%). In 311 participants (18.25%), only one tooth was involved, while in most patients (536; 81.75%), TDI occurred in more than one tooth. Significant proportion (82.27%) of traumatized teeth presented completely formed root apex. The main etiologic factors involved in TDI were falls (51.71%), traffic accidents (22.90%) and violence (5.67%). Based on the obtained data, it may be concluded that accurate policies of TDI prevention must be established, capable of stimulating the exposure of appropriate protocols for management of these lesions. The prevalence of TDI in Goiânia subpopulation is compared to the prevalence reported in epidemiological studies in others populations.

Procedural errors during root canal preparation using rotary NiTi instruments detected by periapical radiography and cone beam computed tomography.

This study detected procedural errors created by rotary nickel-titanium (NiTi) instruments during root canal preparation by two imaging methods. Forty extracted human maxillary and mandibular molars were divided randomly into two groups and treated by two endodontists (n=10) and two undergraduate dental students (n=10). The ProTaper Universal Rotary System was used to shape the canals and then they were filled using AH Plus sealer and gutta-percha. Periapical radiographs (PR) and cone beam computed tomography (CBCT) images were obtained and two examiners, who evaluated them to verify the occurrence of procedural errors (fractured instruments, perforations, and canal transportation). The Chi-square test at 0.05 level of significance was used for statistical analyses. There were no significant differences (p>0.05) between the imaging methods. In the analysis of procedural errors, there was no significant difference (p>0.05) between the groups of operators (endodontists vs. students) nor between tooth groups (maxillary molars vs. mandibular molars). In view of the low incidence of procedural errors during root canal preparation performed by students the introduction of rotary NiTi instruments has potential in undergraduate teaching. PR and CBCT permitted the detection of procedural errors, but the CBCT images offer more recourse for diagnosis.

Microbiological and microscopic analysis of the pulp of non-vital traumatized teeth with intact crowns.

OBJECTIVE: This study evaluated the presence of microorganisms and analyzed microscopically the pulp of 20 traumatized human teeth with intact crowns and clinical diagnosis of pulp necrosis, based on the association of at least three of the clinical criteria: crown discoloration, negative response to thermal and electric pulp vitality tests, positive response to vertical and horizontal percussion, pain on palpation or mobility. MATERIAL AND METHODS: Microbiological collection was performed from the root canals to evaluate the presence of microorganisms. The pulp samples were stained with hematoxylin and eosin (H.E.) for histological evaluation of possible morphological alterations. RESULTS: Analysis of results was performed by statistical tests (linear regression test and diagnostic analysis) and subjective analysis of the sections stained with H.E. and revealed that only 15% of the sample did not exhibit microbial development. The time elapsed between dental trauma and onset of endodontic intervention ranged from 15 days to 31 months; the percussion test presented high sensitivity (80%) for detection of microorganisms in the root canal of traumatized teeth; 3 teeth (15%) did not present pulp tissue, being characterized as complete autolysis; analysis of pulp samples was performed on the other 17 cases, among which 3 (15%) exhibited partial necrosis without possibility of repair and 14 presented complete necrosis; none of the clinical criteria employed for the diagnosis of pulp necrosis in traumatized teeth was pathognomonic. CONCLUSIONS: The present results allowed the following conclusions: with regard to microbiological findings, 85% of teeth presented microorganisms in the root canal, despite the presence of an intact crown. Concerning the microscopic findings, 100% of traumatized teeth presented pulp necrosis; the pulp vitality tests based on pulp response to heat, cold and vertical percussion were the most reliable to diagnose pulp necrosis in traumatized teeth.

Method to evaluate inflammatory root resorption by using cone beam computed tomography.

INTRODUCTION: The aim of this study was to evaluate a method to measure inflammatory root resorption (IRR) by using cone beam computed tomography (CBCT) scans. METHODS: IRR sites were classified according to root third and root surface, and IRR extension was measured on the axial, transverse, and tangent views of 3-dimensional CBCT scans by using the Planimp software. A 5-point (0-4) scoring system was used to measure the largest extension of root resorption. A total of 48 periapical radiographs and CBCT scans originally taken from 40 patients were evaluated. The kappa coefficient was used to assess interobserver agreement and the chi(2) test to determine significant differences between the imaging methods. The level of significance was set at alpha = 1%. RESULTS: IRR was detected in 68.8% (83 root surfaces) of the radiographs and 100% (154 root surfaces) of the CBCT scans (P < .001). The extension of IRR was >1-4 mm in 95.8% of the CBCT images and in 52.1% of the images obtained by using the conventional method (P < .001). CONCLUSIONS: CBCT seems to be useful in the evaluation of IRR, and its diagnostic performance was better than that of periapical radiography.

Influence of length of root canal obturation on apical periodontitis detected by periapical radiography and cone beam computed tomography.

INTRODUCTION: The verification of the best length of root canal instrumentation and obturation still is controversial theme in endodontics. The purpose of this study was to determine the influence of length of root canal obturation on apical periodontitis (AP) detected by periapical radiography and cone beam computed tomography (CBCT). METHODS: A total of 503 root canal obturations were evaluated by using periapical radiography and CBCT. Distances from the radiographic apex to the tip of filling material were measured and classified as close to 2 mm, 1 mm short or beyond apex, and at the apex. Obturations at the apex were associated with AP. Odds ratio, confidence intervals, and chi(2) test were used for statistical analyses. RESULTS: Periapical radiographs showed that root canal obturations were 1-2 mm short of the apex in 88%, 89.3%, and 95% of the anterior teeth, premolars, and molars, respectively. CBCT images showed obturations had the same length in 70%, 73.7%, and 79% of anterior teeth, premolars, and molars, respectively. The frequency of AP was significantly greater in molars than in the other tooth groups, regardless of diagnostic method. AP was detected more frequently when CBCT was used. CONCLUSIONS: AP was detected at all lengths of root canal obturation. The analyses of diagnostic methods showed that AP was detected more frequently when CBCT was used.

Efficacy of sodium hypochlorite and chlorhexidine against Enterococcus faecalis--a systematic review.

The efficacy of the sodium hypochlorite (NaOCl) and chlorhexidine (CHX) on Enterococcus faecalis was evaluated by systematic review and meta-analysis. The search strategies included search in electronic biomedical journal databases (MEDLINE, EMBASE, CENTRAL) and handsearching records, using different matches of keywords for NaOCl, CHX and Enterococcus faecalis. From 41 in vivo studies, 5 studies met the inclusion criteria. In a sample containing 159 teeth, E. faecalis was detected initially in 16 (10%) teeth by polymerase chain reaction (PCR) and 42 (26.4%) teeth by microbial culture techniques. After root canal disinfection, this species was observed in 11 (6.9%) teeth by PCR and 12 (7.5%) teeth by culture. Risk differences of included studies were combined as generic inverse variance data type (Review Manager Version 5.0 _ Cochrane Collaboration, http://www.cc-ims.net, accessed 15 May 2008), taking into account the separate tracking of positive and negative cultures/PCR. The level of statistical significance was set at p<0.05. In conclusion, NaOCl or CHX showed low ability to eliminate E. faecalis when evaluated by either PCR or culture techniques.