ABSTRACT
PURPOSE: To compare the stresses and displacements on perimplant bone generated by screw- and cement-retained prostheses using the finite element method. MATERIALS AND METHODS: Two models were constructed: partial fixed implant-supported prostheses with three elements retained by screws (SFP) or cement (CFP). Vertical and oblique loads of 100 N were applied on the models. Bone was analyzed by the principal stresses σ1 and σ3. The displacement between the implant and the bone was identified by the penetration and gap. RESULTS: Results showed a similar pattern in the distribution of the principal stresses between both prostheses. Under the σ1 stresses, the SFP showed similar values in the bone compared with the CFP. The analysis of the σ3 showed stress peaks 28% higher in the SFP, considering vertical and oblique loads. Displacement analysis showed a similar pattern and similar values between the prostheses for penetration and gap under both loads. CONCLUSIONS: There were no important differences in the σ1 analysis and the displacement between the SFP and CFP. The differences in marginal bone level reported between SFP and CFP in some clinical studies may not be related to a mechanical factor.
