Experimental study, simulation and technical-economic feasibility of an interesterification plant for hydrocarbons synthesis by using plastics and frying oil waste.

This work presents the experimental assessment of a 20 mL batch reactor's efficacy in converting plastic and oil residues into biofuels. The reactor, designed for ease of use, is heated using a metallic system. The experiments explore plastic solubilization at various temperatures and residence times, employing a mixture of distilled water and ethylene glycol as the solvent. Initial findings reveal that plastic solubilization requires a temperature of 350 °C with an ethylene glycol mole fraction of 0.35, whereas 250 °C suffices with a mole fraction of 0.58. Additionally, the study includes a process simulation of a plant utilizing a double fluidized bed gasifier and an economic evaluation of the interesterification/pyrolysis plant. Simulation results support project feasibility, estimating a total investment cost of approximately $12.99 million and annual operating expenses of around $17.98 million, with a projected payback period of about 5 years.

Human health risk assessment of mercury in highly consumed fish in Salvador, Brazil.

This work reports assessing risks to human health resulting from mercury levels in sardines (Sardinella brasiliensis), which have been highly consumed by the low-income population from Salvador, Brazil. Mercury was determined using the Direct Mercury Analysis (DMA) in fifty-one commercially acquired samples in seventeen neighborhoods. The mercury content on a wet basis ranged from 0.023 to 0.083 µg g-1 for an average value of 0.039 µg g-1. The estimated weekly intake (EWI), target hazard quotient (THQ), and maximum safe consuming quantity (MSCQ) were used in the toxicological assessment, and all these indices denoted that this food does not pose any risks to the human health of the population that consumes it. The development of this work was very significant because most sardines sold in Salvador originate from Todos os Santos Bay, which has a history of mercury contamination.

Determination and evaluation of the ecological risk of mercury in different granulometric fractions of sediments from a public supply river in Brazil.

This work reports the quantification of total mercury in sediments collected in periods with and without rain from the Joanes River, Bahia, Brazil. Determinations were made using Direct Mercury Analysis (DMA), the accuracy of which was confirmed with two certified reference materials. The highest total mercury concentrations were found at the sampling point close to commercial areas and large residential condominiums. On the other hand, the lowest levels were found in the site close to a mangrove region. The geoaccumulation index was applied to the total mercury results, evidencing low contamination in the region studied. The contamination factor showed that of the seven stations investigated, four samples collected in the rainy season showed moderate contamination. The results of the ecological risk assessment were utterly consistent with the contamination factor data. This study showed that the smaller sediment particles concentrate more mercury, corroborating what has been predicted by the adsorption processes.

Polycyclic aromatic hydrocarbons in coral reefs with a focus on Scleractinian corals: A systematic overview.

The impact of petroleum exploitation and oil spills in marine ecosystems has increased over time. Among the concerns regarding these events, the impact on coral reefs stand out because this ecosystem has ecological and economic importance and is globally threatened. We performed a systematic review and bibliometric analysis of studies that determine polycyclic aromatic hydrocarbons (PAHs) in coral reefs, attempting to answer how the studies were distributed around the globe, the main environmental matrices and species of coral studied, the main PAHs found and their mean concentrations, and the methodology used. A bibliographic search resulted in 42 studies with worldwide distribution. The bibliometric results presented more explored terms, such as sediments and toxicology, and newly investigated terms, which should encourage a new area of study, such as those related to zooxanthellae and mucus. The main matrices studied in coral reefs are sediments, corals, and water, whereas air and other invertebrates have rarely been studied. Approximately 45 species of corals with several morphotypes have been reported. PAHs recommended by the United States Environmental Protection Agency (US EPA) were analyzed in all studies, while additional compounds were analyzed in only five. The methods used to determine hydrocarbons are predominantly the most traditional; however, for corals, studies have tended to separate tissue, zooxanthellae, skeleton, and mucus. In the future, we recommend investment in improving the capacity to detect non-conventional PAHs, more studies in regions that are rarely explored in developing countries, and the creation of databases to facilitate management planning on marine coasts.

The occurrence of pristine and functionalized fullerenes as constituents of airborne aerosols.

We investigated if pristine and functionalized fullerenes could be actual constituents of fine atmospheric aerosols. Comprehensive profiles of fullerenes from 1 µL extracts were made through matrix laser desorption ionization Time-of-Flight Mass Spectrometry (MALDI-MS) within a few minutes. The ion with m/z 720, corresponding to [C60]-•, was identified as fullerene after 1 µL of α-cyano-4-hydroxycinnamic acid matrix solution was spotted over the dried extracts. The ions with the m/z corresponding to C70, C76, C84, C100, C118, C128, and C130 were also attributed to other fullerene species detected within the samples. The ion m/z 878 was found to be the fullerene derivative diethyl methano[60]fullerene dicarboxylate. Since ions of fragmented fullerene molecules were not detected even at high laser energies, we considered the fullerenes' occurring as original constituents of real atmospheric particle matrices instead of being formed as artifacts of the laser action on samples. Therefore, this protocol would be helpful in the understanding of the distribution of either pristine or functionalized fullerenes in the environment and their participation in atmospheric chemistry under typical conditions, as well as its application in vitro and in vivo (eco)toxicity studies.

Occurrence of mercury in polychaete species (Annelida) and their associated sediments from an important Southern Atlantic Ocean Bay.

In the present study, the Hg levels in freshly collected polychaete species and their associated sediments were evaluated from Todos os Santos Bay, Northeastern Brazil. Additionally, it was also measured the Hg distribution along the annelids' body parts (anterior region, abdomen, and posterior region). Total Hg concentration was as follows: 13.6-144 µg kg-1 (Scolelepis chilensis, deposit feeder), 8.2-122 µg kg-1 (Laeonereis acuta, deposit feeder), 95-612 µg kg-1 (Armandia agilis, deposit feeder); 96.6-206 µg kg-1 (Lumbrineris sp., carnivorous), 75.3-112 µg kg-1 (Goniada echinulate, carnivorous), and 115-198 µg kg-1 (Branchiomma sp., suspension feeder). In turn, Hg levels in sediments ranged from 2.77 ± 0.24 to 6.38 ± 0.15 µg kg-1. Hg concentrations found in polychaete soft tissues were higher than those found in the sediments. Specific habits, feeding behavior, trophic level, and stressful environmental conditions are the main factors affecting the Hg levels in the species studied. The bioaccumulation factor (BAF), contamination factor (CF), and ecological risk assessment (Er) were calculated. The BAF values were higher than 1 for all studied species, indicating Hg bioaccumulation in the annelids, but the low levels of CF e Er showed those Hg levels present low to no significant ecological risk for the biota and benthonic organisms living in the sediments. Finally, no statistically significant difference was observed for Hg concentration levels along the polychaete body parts.

Method development using chemometric tools for determination of endocrine-disrupting chemicals in bottled mineral waters.

A simple method was developed to determine 14 endocrine-disrupting chemicals (EDCs) in bottled waters, based on dispersive micro-solid phase extraction (d-µ-SPE) and liquid chromatography-mass spectrometry (LC-MS). Extraction was optimized using 2 k-1 factorial and Doehlert experimental designs. Optimized conditions were 80 mg C18, 25 min extraction at 1000 rpm, and 6 min desorption time. Repeatability was below 17 % for all EDCs. LOD and LOQ varied from 1.60 ng L-1 (estradiol, E2) to 23.2 ng L-1 (dimethylphthalate, DMP) and from 5.33 ng L-1 (E2) to 77.3 ng L-1 (DMP). We found DMP and bisphenol A (BPA) in samples after the heat treatment. DMP was up to 58.7 µg L-1, while BPA was up to 1.34 µg L-1. Tolerance of daily intake (TDI) for DMP were 2.50-2.94 µg kg-1 day-1 (children) and 1.43-1.68 µg kg-1 day-1 (adults). TDI for BPA were 0.03-0.07 µg kg-1 day-1 (children) and 0.01-0.04 µg kg-1 day-1 (adults).

Exploratory analysis of the presence of 14 carbonyl compounds in bottled mineral water in polyethylene terephthalate (PET) containers.

Carbonyl compounds (CCs) can migrate from bottles to mineral water because of plastic degradation. An exploratory analysis of the presence a significant number of CCs (14) in bottled mineral water with and without gas in polyethylene terephthalate (PET) containers was performed using ultra-fast liquid chromatography coupled to mass spectrometry (UFLC-MS). The data from the analysis was submitted to chemometric treatment (principal component analysis, PCA). Formaldehyde, acetaldehyde, and benzaldehyde were found in all samples (0.07-125 ng mL-1). Acrolein and acetone were present in 81% and 75% of the samples, respectively. The concentration of acrolein in carbonated water was up to 3.8 times greater than that measured in non-carbonated water (0.07-0.44 ± 0.01 ng mL-1). PCA analysis showed that gasification can influence the composition of CCs present in mineral water and that the plastic material of the bottles is a likely source of CCs. In addition, benzaldehyde levels may be associated with the use of recycled materials.

Microplastic pollution in Southern Atlantic marine waters: Review of current trends, sources, and perspectives.

Microplastics (MPs) are emerging and ubiquitous contaminants which have been gaining prominence since the last decade to nowadays. This is due to their possible adverse effects in aquatic ecosystems as well as the huge amount of plastic waste exponentially generated around the globe. Plastics may be introduced either directly to water bodies or indirectly to the aquatic systems by being carried by the wind, from emissions of contaminated effluents, and soil leaching, among other processes. In turn, these debris may interact with organic and inorganic contaminants, such as polycyclic aromatic hydrocarbons (PAHs), polybrominated diphenyl ethers (PBDEs) and trace constituents, and with microorganisms. Although the abundance of microplastics from South Atlantic waters is among the highest found worldwide, the number of studies in these marine waters regarding MP contamination is still scarce. Additionally, there still are no consensus on the best sampling conditions, which may be underestimating MPs. In this way, adequate MPs studies regarding their distribution, exposure levels, chemical and biological interactions are highly suggested in order to better understand both environmental and human health potential risks. This review assessed advances in sampling, analytical methodologies, characterization and understanding of MP sources in these marine waters in comparison to data from other regions around the globe.

Customized dispersive micro-solid-phase extraction device combined with micro-desorption for the simultaneous determination of 39 multiclass pesticides in environmental water samples.

A dispersive micro-solid phase extraction (d-µ-SPE) procedure was developed for the simultaneous extraction of 39 multiclass pesticides, containing a variety of chemical groups (organophosphate, organochlorine, pyrethroid, strobilurin, thiocarbamate, triazole, imidazole, and triazine), from water samples. A customized d-µ-SPE glass device was combined with a multi-tube platform vortex and a micro-desorption unit (Whatman Mini-UniPrep G2 syringeless filter), which allowed the unique simultaneous desorption, extract filtration, and injection. A simplex-centroid mixture design and Doehlert design were employed to optimize the extraction conditions. The optimized extraction conditions consisted of an extraction time of 30 min, an addition of 6.74 % of NaCl into 100 mL of water sample, and a desorption time of 24 min with 500 µL of EtAc. The procedure provided a low limit of detection (LOD), ranging from 0.51 ng L-1 (4,4-DDE) to 22.4 ng L-1 (dimethoate), and an enrichment factor ranging from 72.5 (dimethoate) to 200 (tebuconazole). The relative recoveries of the pesticides from spiked freshwater and seawater ranged from 74.2 % (endrin) to 123 % (molinate). The proposed procedure was applied to detect the presence of multiclass pesticides in environmental water samples. Three pesticides commonly applied in Brazil, namely, malathion, dimethoate, and lambda-cyhalothrin, were detected in concentrations ranging from

Determination of free- and bound-carbonyl compounds in airborne particles by ultra-fast liquid chromatography coupled to mass spectrometry.

This study presents the development and application of a new analytical methodology for determination of free- and bound-carbonyl compounds (CC) (as the CC themselves and as the hydroxyalkylsulfonic acids - HASA, respectively) in airborne particles. Free- and bound-CC determination were done through reaction with 2,4-dinitrophenylhydrazine (2,4-DNPH) and analysis by UFLC-MS. The method was successfully validated, showing good figures for linearity (R2 ≥ 0.9937), sensibility (3 fg ˂ LOD ˂ 20 fg for methacrolein and heptanal, respectively) and repeatability (5.9% ˂ RSD ˂ 13%). The proposed method was successfully applied in real samples of inhalable atmospheric particulate matter (PM10) and urban dust certified reference material (SRM 1649 b). The main CC determined in the SRM 1649 b was formaldehyde (75.4 µg g-1 in the free form, and 1898 µg g-1 in the bound form). In addition, for the bound-CC form (HASA), concentrations were determined for acetaldehyde (60.3 µg g-1), acetone (20.5 µg g-1), acrolein (9.15 µg g-1), propionaldehyde (17.1 µg g-1) and valeraldehyde (12.2 µg g-1). For PM10 samples, formaldehyde (148 µg g-1) and acetaldehyde (28.9 µg g-1) were quantified as free aldehydes and as HASA (hydroxymethanelsulfonic acid and hydroxyethanesulfonic acid were 432 µg g-1 and 211 µg g-1, respectively). Other bound-CC were, on average, within 19.2 µg g-1 (acrolein) and 62.1 µg g-1 (valeraldehyde). For all samples, acetone, acrolein, propionaldehyde and valeraldehyde were quantified only as HASA (bound-CC). Therefore, we could identify and quantify six carbonyl compounds using the proposed method. It is worth mentioning the hydrolysis step was crucial for the correct quantification of the HASAs. This was, in turn, what enabled the quantification of a greater number of analytes in the airborne samples. Hence, this procedure was found to be comprehensive, precise, accurate and suitable to be employed for determination of free-CC and HASA (bound-CC) in atmospheric particulate samples.

Occurrence of 3-nitrobenzanthrone and other powerful mutagenic polycyclic aromatic compounds in living organisms: polychaetes.

In this work we report the occurrence of powerful mutagenic 3-nitrobenzanthrone (3-NBA), in addition to 18 polycyclic aromatic hydrocarbons (PAHs), 6 oxygenated PAHs and 27 nitrated PAHs in polychaete worms. Benzanthrone (BA), another important mutagenic polycyclic aromatic compound (PAC) also was detected in the samples. Polychaete annelids have great ecological relevance, being widely distributed in different environmental conditions, from intertidal zones up to seven thousand feet deep areas. They are abundantly found in both contaminated and uncontaminated areas and, therefore, used as indicators of the pollution status of a given area. As we know, so far, most of these PACs has not been previously reported in living organisms before. The 3-NBA concentrations determined in this study were within 0.11-5.18 µg g-1. Other relevant PACs such as PAHs, quinones and nitro-PAHs were found in maximum concentrations at 0.013 µg g-1 (coronene) to 11.1 µg g-1 (benzo[k]fluoranthene), 0.823 µg g-1 (9,10-phenenthrenequinone) to 12.1 µg g-1 (1,4-benzoquinone) and 0.434 (1-nitronaphthalene) µg g-1 to 19.2 µg g-1 (6-nitrobenzo[a]pyrene), respectively. Principal component analysis (PCA), ternary correlations and diagnostic ratios were employed in order to propose probable sources for PACs. Although statistical analysis preliminarily has indicated both pyrogenic and petrogenic contributions, petrogenic sources were predominant reflecting the impacts of petroleum exploration and intensive traffic of boats in the study area.

Determination and Profiling of Human Skin Odors Using Hair Samples.

Background. There is no gold standard method for human skin odor determination; several techniques can be applied to collect, extract, transfer, and detect human skin odors. However, none of these methods are suitable for field sampling of a large number of individuals. Objective. The present study aimed to develop a simple, fast, non-invasive, and low-cost method for such a purpose. Methods. Considering that hair from legs can act as a retention mesh of volatile organic compounds (VOCs), samples of leg hairs provided by healthy adult males were collected and solid-phase microextraction (SPME), in headspace (HS) mode, coupled to gas chromatography (GC) and mass spectrometry (MS) analysis of the samples was carried out. A pilot test was applied to detect five quality markers that are frequently reported in human skin odors. Then, several steps were performed for method standardization. The method was applied to 36 different individuals (3 sampled under laboratory conditions and 33 under field conditions), aiming to evaluate its applicability in both environments. Findings. A total of 49 VOCs were identified, and 73.5% of these have been reported in previous studies. Main Conclusions. Hair from legs can be considered an efficient tool for human skin odor sampling and a suitable and practical matrix for human skin odor profile determination by using HS-SPME/GC-MS.

Occurrence of the potent mutagens 2- nitrobenzanthrone and 3-nitrobenzanthrone in fine airborne particles.

Polycyclic aromatic compounds (PACs) are known due to their mutagenic activity. Among them, 2-nitrobenzanthrone (2-NBA) and 3-nitrobenzanthrone (3-NBA) are considered as two of the most potent mutagens found in atmospheric particles. In the present study 2-NBA, 3-NBA and selected PAHs and Nitro-PAHs were determined in fine particle samples (PM 2.5) collected in a bus station and an outdoor site. The fuel used by buses was a diesel-biodiesel (96:4) blend and light-duty vehicles run with any ethanol-to-gasoline proportion. The concentrations of 2-NBA and 3-NBA were, on average, under 14.8 µg g-1 and 4.39 µg g-1, respectively. In order to access the main sources and formation routes of these compounds, we performed ternary correlations and multivariate statistical analyses. The main sources for the studied compounds in the bus station were diesel/biodiesel exhaust followed by floor resuspension. In the coastal site, vehicular emission, photochemical formation and wood combustion were the main sources for 2-NBA and 3-NBA as well as the other PACs. Incremental lifetime cancer risk (ILCR) were calculated for both places, which presented low values, showing low cancer risk incidence although the ILCR values for the bus station were around 2.5 times higher than the ILCR from the coastal site.

Methodology to examine polycyclic aromatic hydrocarbons (PAHs) nitrated PAHs and oxygenated PAHs in sediments of the Paraguaçu River (Bahia, Brazil).

Conventional methods for determination of polycyclic aromatic compounds (PACs) in sediments usually require large sample sizes (grams) and solvent volumes (at least 100 mL) through the employment of Soxhlet extraction, which is both time (hours) and energy consuming, among other disadvantages. We developed a new analytical protocol for the determination of PACs in sediments using microextraction, which requires small sample masses (25 mg), 500 µL of acetonitrile-dichloromethane mix and sonication for 23 min, followed by GC-MS analysis. The method was validated using the certified reference material SRM 1941b - NIST organic marine sediment, as well as internal deuterated standards. Seventeen PAHs, seven nitro-PAHs and one quinone were detected and quantified. The mean concentrations were 90.4 ng g-1 for PAHs, 179.2 ng g-1 for nitro-PAHs and 822.5 ng g-1 for quinones. The proposed method showed good sensitivity, linearity, precision and accuracy for the determination of PAC in sediments samples.

Determination of free and total sulfur(IV) compounds in coconut water using high-resolution continuum source molecular absorption spectrometry in gas phase.

This work proposes a method for the determination of free and total sulfur(IV) compounds in coconut water samples, using the high-resolution continuum source molecular absorption spectrometry. It is based on the measurement of the absorbance signal of the SO2 gas generate, which is resultant of the addition of hydrochloric acid solution on the sample containing the sulfating agent. The sulfite bound to the organic compounds is released by the addition of sodium hydroxide solution, before the generation of the SO2 gas. The optimization step was performed using multivariate methodology involving volume, concentration and flow rate of hydrochloric acid. This method was established by the sum of the absorbances obtained in the three lines of molecular absorption of the SO2 gas. This strategy allowed a procedure for the determination of sulfite with limits of detection and quantification of 0.36 and 1.21mgL-1 (for a sample volume of 10mL) and precision expressed as relative standard deviation of 5.4% and 6.4% for a coconut water sample containing 38.13 and 54.58mgL-1 of free and total sulfite, respectively. The method was applied for analyzing five coconut water samples from Salvador city, Brazil. The average contents varied from 13.0 to 55.4mgL-1 for free sulfite and from 24.7 to 66.9mgL-1 for total sulfur(IV) compounds. The samples were also analyzed employing the Ripper´s procedure, which is a reference method for the quantification of this additive. A statistical test at 95% confidence level demonstrated that there is no significant difference between the results obtained by the two methods.

Determination of silicon in biomass and products of pyrolysis process via high-resolution continuum source atomic absorption spectrometry.

Thermochemical processes can convert the biomass into fuels, such as bio-oil. The biomass submitted to pyrolysis process, such as fibers, are generally rich in silicon, an element that can lead to damages in an engine when there is high concentration in a fuel. High-resolution continuum source atomic absorption spectrometry (HR-CS AAS) is an interesting alternative for Si determination in the products and byproducts of the pyrolysis process because, besides the flame (F) and graphite furnace (GF) atomizers, it has enhanced the application of direct analysis of solid samples (SS) within GF. This study aimed the development of methods to determine Si in biomass samples, their products and byproducts using HR-CS AAS. A high-resolution continuum source atomic absorption spectrometer contrAA 700 equipped with F and GF atomizers was used throughout the study. HR-CS F AAS (λ = 251.611nm, 1 detection pixel, N2O/C2H2 flame) was used to evaluate Si content in biomass and ash, after a microwave-assisted acid digestion with HNO3 and HF. HR-CS GF AAS (Tpyr = 1400°C, Tatom = 2650°C) has evaluated Si in pyrolysis water and bio-oil at 251.611nm, and in peach pit biomass and ash at 221.174nm using SS, both wavelengths with 1 detection pixel. Rhodium (300µg) was applied as permanent modifier and 10µgPd + 6µg Mg were pipetted onto the standards/samples at each analysis. Three different biomass samples were studied: palm tree fiber, coconut fiber and peach pit, and three certified reference materials (CRM) were used to verify the accuracy of the methods. The figures of merit were LOD 0.09-20mgkg-1, and LOQ 0.3-20mgkg-1, considering all the methods. There were no significant differences between the CRM certified values and the determined ones, using a Student t-test with a confidence interval of 95% (n = 5). Si concentration ranged from 0.11-0.92% mm-1, 1.1-1.7mgkg-1, 3.3-13mgkg-1, and 0.41-1.4%mm-1, in biomass, bio-oil, pyrolysis water and ash, respectively. Si remained mostly in the ash, leading to a mass fraction of up to 103%, even when the Si loss is not considered. Silicon concentration in bio-oil was below 1.7mgkg-1, which is suitable for its application as a fuel. The developed methods using HR-CS AAS are suitable for Si determination in biomass, bio-oil, pyrolysis water, and ash. The application of bio-oil as an alternative fuel would be possible evaluating its Si content due to its low levels. The mass balance for Si has proved to be an important tool in order to evaluate the correct disposal of pyrolysis process byproducts.

Pesticides in fine airborne particles: from a green analysis method to atmospheric characterization and risk assessment.

The intensive use of pesticides such as herbicides, insecticides, fungicides and acaricides has been lead to ubiquitous contamination, being present not only in soils, water bodies and/or crops, but also in the atmosphere. Considering the massive amount of pesticides employed globally, together to their persistence, this may be an important concern regarding air quality and human health worldwide. In the present study we developed a green sensitive sample preparation method for determination of nine organophosphates, two pyrethroids, one carbamate, and one strobirulin in PM2.5 collected in a tropical coastal area in the Southern Hemisphere for the first time. Extraction of PM2.5 sample masses, as low as 206 µg, were performed in a miniaturized device using 500 µL of a mixture containing 18% acetonitrile in dichloromethane followed by sonication for 23 minutes and injection into GC-MS. A total of 12 pesticides were identified and quantified successfully, among them, eight banned pesticides. A risk assessment exposure and cancer risk for possible carcinogenic pesticides (bifenthrin, malathion, parathion and permethrin) were performed for exposure of adults, children and infants. Hazard Quotient and cumulative exposure for organophosphate and pyrethroid pesticides were less than 1, showing that cumulative risk is within acceptable range.

A simple, comprehensive, and miniaturized solvent extraction method for determination of particulate-phase polycyclic aromatic compounds in air.

The method allowed simultaneous characterization of PAHs, nitro-PAHs and quinones in atmospheric particulate matter. This method employs a miniaturized micro-extraction step that uses 500 µL of an acetonitrile-dichloromethane mix and instrumental analysis by means of a high-resolution GC-MS. The method was validated using the SRM1649b NIST standard reference material as well as deuterated internal standards. The results are in good agreement with the certified values and show recoveries between 75% and 145%. Limit of detection (LOD) values for PAHs were found to be between 0.5 pg (benzo[a]pyrene) to 2.1 pg (dibenzo[a,h]anthracene), for nitro-PAHs ranged between 3.2 pg (1-nitrobenzo[e]pyrene) and 22.2 pg (3-nitrophenanthrene), and for quinones ranged between 11.5 pg (1,4-naphthoquinone) and 458 pg (9,10-phenanthraquinone). The validated method was applied to real PM10 samples collected on quartz fiber filters. Concentrations in the PM10 samples ranged from 0.06 to 15 ng m(-3) for PAHs, from

Determination of lead in biomass and products of the pyrolysis process by direct solid or liquid sample analysis using HR-CS GF AAS.

A method has been developed for the determination of lead in biomass, bio-oil, pyrolysis aqueous phase, and biomass ashes by high-resolution continuum source graphite furnace atomic absorption spectrometry (HR-CS GF AAS) and direct solid or liquid sample analysis. All measurements were performed without chemical modifier and calibration could be carried out using aqueous standard solutions. A pyrolysis temperature of 800°C and an atomization temperature of 2200°C were applied. The limits of detection and quantification were, respectively, 0.5 µg kg(-1) and 2 µg kg(-1) using the analytical line at 217.001 nm and 6 µg kg(-1) and 19 µg kg(-1) at 283.306 nm. The precision, expressed as relative standard deviation, was between 3% and 10%, which is suitable for direct analysis. The lead concentrations found for the solid samples varied between 0.28 and 1.4 mg kg(-1) for biomass and between 0.25 and 2.3 mg kg(-1) for ashes, these values were much higher than those found for bio-oil (2.2-16.8 µg kg(-1)) and pyrolysis aqueous phase (3.2-18.5 µg kg(-1)). After the determination of lead in the samples, it was possible to estimate the relative distribution of this element in the fractions of the pyrolysis products, and it was observed that most of the lead present in the biomass was eliminated to the environment during the pyrolysis process, with a significant portion retained in the ashes.