Micro-/Nano-Structured Ceramic Scaffolds That Mimic Natural Cancellous Bone.

Micro-/nano-structured scaffolds with a weight composition of 46.6% α-tricalcium phosphate (α-TCP)-53.4% silicocarnotite (SC) were synthesized by the polymer replica method. The scanning electron microscopy (SEM) analysis of the scaffolds and natural cancellous bone was performed for comparison purposes. Scaffolds were obtained at three cooling rates via the eutectoid temperature (50 °C/h, 16.5 °C/h, 5.5 °C/h), which allowed the surface nanostructure and mechanical strength to be controlled. Surface nanostructures were characterized by transmission electron microscopy (TEM) and Raman analysis. Both phases α-TCP and SC present in the scaffolds were well-identified, looked compact and dense, and had neither porosities nor cracks. The non-cytotoxic effect was evaluated in vitro by the proliferation ability of adult human mesenchymal stem cells (ah-MSCs) seeded on scaffold surfaces. There was no evidence for cytotoxicity and the number of cells increased with culture time. A dense cell-hydroxyapatite layer formed until 28 days. The SEM analysis suggested cell-mediated extracellular matrix formation. Finally, scaffolds were functionalized with the alkaline phosphatase enzyme (ALP) to achieve biological functionalization. The ALP was successfully grafted onto scaffolds, whose enzymatic activity was maintained. Scaffolds mimicked the micro-/nano-structure and chemical composition of natural cancellous bone by considering cell biology and biomolecule functionalization.

In vitro study of the proliferation and growth of human fetal osteoblasts on Mg and Si co-substituted tricalcium phosphate ceramics.

The objective of this work was to study the feasibility of the solid state sintering, a conventional ceramic processing method, to obtain Mg and Si co-substituted tricalcium phosphate bioceramics and composites containing diopside. A series of new Ca3 (PO4 )2 based ceramics has been prepared from attrition milled mixtures of synthetic Ca3 (PO4 )2 and CaMg(SiO3 )2 powders, isostatically pressed and sintered at 1250-1300°C. Materials containing 0, 1, and 5 wt % of CaMg(SiO3 )2 were constituted by ß + α - Ca3 (PO4 )2 solid solutions while the material containing 60 wt % of CaMg(SiO3 )2 was a constituted by ß- Ca3 (PO4 )2 and CaMg(SiO3 )2 . The biological responses of the developed ceramics were studied in vitro using human fetal osteoblast cultures. Culture times ranged from 1 to 21 days. The new family of materials promotes the adhesion and proliferation of human osteoblasts cultured onto their surface forming a monolayer and showing a normal morphology. The results of the MTT and Alamar Blue assays showed that the soluble components extracted from the Mg/Si- co-substituted Ca3 (PO4 )2 and the Ca3 (PO4 )2 -CaMg(SiO3 )2 composite were noncytotoxic. The specimens with diopside exhibited a better in vitro behavior which is attributed to the release of Si and Mg ions to the culture medium, enhancing the activity of cells. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2266-2275, 2017.

Self-Forming 3D Core-Shell Ceramic Nanostructures for Halogen-Free Flame Retardant Materials.

The synthesis of aluminum phosphates-based composites has been widely studied during the past decade because of the promising industrial application of these materials. Here we show a simple one-pot heterogeneous precipitation approach to fabricate a sepiolite-phosphate (SepP) composite with adequate control of the size and dispersion of the phosphate nanoparticles. This coupling between aluminum phosphate and sepiolite nanofibers results in the development of a novel three-dimensional rigid supported phosphate structure, which is generated during the thermal treatment. According to our results, this phenomenon can be explained by a migration-coalescence mechanism of phosphate nanoparticles over the sepiolite support, assisted by a liquid phase. It is worth pointing out that this stimulant behavior observed here could have potential technological applications such as halogen-free flame retardant materials.

Multidisciplinary characterization of the long-bone cortex growth patterns through sheep's ontogeny.

Bone researches have studied extant and extinct taxa extensively trying to disclose a complete view of the complex structural and chemical transformations that model and remodel the macro and microstructure of bone during growth. However, to approach bone growth variations is not an easy task, and many aspects related with histological transformations during ontogeny remain unresolved. In the present study, we conduct a holistic approach using different techniques (polarized microscopy, Raman spectroscopy and X-ray diffraction) to examine the histomorphological and histochemical variations in the cortical bone of sheep specimens from intrauterine to adult stages, using environmentally controlled specimens from the same species. Our results suggest that during sheep bone development, the most important morphological (shape and size) and chemical transformations in the cortical bone occur during the first weeks of life; synchronized but dissimilar variations are established in the forelimb and hind limb cortical bone; and the patterns of bone tissue maturation in both extremities are differentiated in the adult stage. All of these results indicate that standardized histological models are useful not only for evaluating many aspects of normal bone growth but also to understand other important influences on the bones, such as pathologies that remain unknown.

α-Tricalcium phosphate cements modified with ß-dicalcium silicate and tricalcium aluminate: physicochemical characterization, in vitro bioactivity and cytotoxicity.

Biocompatibility, injectability and in situ self-setting are characteristics of calcium phosphate cements which make them promising materials for a wide range of clinical applications in traumatology and maxillo-facial surgery. One of the main disadvantages is their relatively low strength which restricts their use to nonload-bearing applications. α-Tricalcium phosphate (α-C3P) cement sets into calcium-deficient hydroxyapatite (CDHA), which is biocompatible and plays an essential role in the formation, growth and maintenance of tissue-biomaterial interface. ß-Dicalcium silicate (ß-C2S) and tricalcium aluminate (C3A) are Portland cement components, these compounds react with water to form hydrated phases that enhance mechanical strength of the end products. In this study, setting time, compressive strength (CS) and in vitro bioactivity and biocompatibility were evaluated to determine the influence of addition of ß-C2S and C3A to α-C3P-based cement. X-ray diffraction and scanning electron microscopy were used to investigate phase composition and morphological changes in cement samples. Addition of C3A resulted in cements having suitable setting times, but low CS, only partial conversion into CDHA and cytotoxicity. However, addition of ß-C2S delayed the setting times but promoted total conversion into CDHA by soaking in simulated body fluid and strengthened the set cement over the limit strength of cancellous bone. The best properties were obtained for cement added with 10 wt % of ß-C2S, which showed in vitro bioactivity and cytocompatibility, making it a suitable candidate as bone substitute.

ß-Dicalcium silicate-based cement: synthesis, characterization and in vitro bioactivity and biocompatibility studies.

ß-dicalcium silicate (ß-Ca2 SiO4, ß-C2 S) is one of the main constituents in Portland cement clinker and many refractory materials, itself is a hydraulic cement that reacts with water or aqueous solution at room/body temperature to form a hydrated phase (C-S-H), which provides mechanical strength to the end product. In the present investigation, ß-C2 S was synthesized by sol-gel process and it was used as powder to cement preparation, named CSiC. In vitro bioactivity and biocompatibility studies were assessed by soaking the cement samples in simulated body fluid solutions and human osteoblast cell cultures for various time periods, respectively. The results showed that the sol-gel process is an available synthesis method in order to obtain a pure powder of ß-C2 S at relatively low temperatures without chemical stabilizers. A bone-like apatite layer covered the material surface after soaking in SBF and its compressive strength (CSiC cement) was comparable with that of the human trabecular bone. The extracts of this cement were not cytotoxic and the cell growth and relative cell viability were comparable to negative control.

Effect of Mg and Si co-substitution on microstructure and strength of tricalcium phosphate ceramics.

Magnesium and silicon co-doped tricalcium phosphate (TCP) ceramics with compositions corresponding to 0, 5 and 10wt% CaMg(SiO3)2 in the system Ca3(PO4)2-CaMg(SiO3)2 were obtained by conventional sintering of compacted mixtures of Ca3(PO4)2, MgO, SiO2 and CaCO3 powders at temperatures between 1100 and 1450°C. Microstructural analyses were performed by X-ray diffraction and field emission scanning electron microscopy with energy dispersive spectroscopy. Major phases in the obtained ceramics were ß- or α+ß-tricalcium phosphate containing Mg and Si in solid solution. Certain amounts of liquid were formed during sintering depending on composition and temperature. There were found significant differences in distributions of strength determined by the diametral compression of disc tests (DCDT). Failure strengths were controlled by microstructural defects associated with phase development. Mg and Si additions were found to be effective to improve densification and associated strength of TCP bioceramics due to the enhancement of sintering by the low viscosity liquids formed. The highest density and strength were obtained for the TCP ceramic containing 5wt% CaMg(SiO3)2 sintered at 1300°C. Cracking and porosity increased at higher temperatures due to grain growth and swelling.

Radiopacity of zirconia-based all-ceramic crown systems.

The aim of this study was to evaluate the radiopacity of the core and veneer ceramics in four zirconia-based crown systems: In-Ceram Zirconia, In-Ceram YZ, Procera Zirconia, and Cercon. Two-millimeter-thick restoration slices were prepared and digitally radiographed alongside an aluminum stepwedge. The grayscale data were converted into millimeters of aluminum by an image analysis program. The two-way analysis of variance test detected significant differences with respect to all-ceramic system, layer ceramic, and the interaction of the two factors (P = .0001). All materials presented radiopacity values above the minimum recommended by the International Organization for Standardization.