The genetic background determines material-induced bone formation through the macrophage-osteoclast axis.

Osteoinductive materials are characterized by their ability to induce bone formation in ectopic sites. Thus, osteoinductive materials hold promising potential for repairing bone defects. However, the mechanism of material-induced bone formation remains unknown, which limits the design of highly potent osteoinductive materials. Here, we demonstrated a genetic background link among macrophage polarization, osteoclastogenesis and material-induced bone formation. The intramuscular implantation of an osteoinductive material in FVB/NCrl (FVB) mice resulted in more M2 macrophages at week 1, more osteoclasts at week 2 and increased bone formation after week 4 compared with the results obtained in C57BL/6JOlaHsd (C57) mice. Similarly, in vitro, with a greater potential to form M2 macrophages, monocytes derived from FVB mice formed more osteoclasts than those derived from C57 mice. A transcriptomic analysis identified Csf1, Cxcr4 and Tgfbr2 as the main genes controlling macrophage-osteoclast coupling, which were further confirmed by related inhibitors. With such coupling, macrophage polarization and osteoclast formation of monocytes in vitro successfully predicted in vivo bone formation in four other mouse strains. Considering material-induced bone formation as an example of acquired heterotopic bone formation, the current findings shed a light on precision medicine for both bone regeneration and the treatment of pathological heterotopic bone formation.

Hypoxia Drives Material-Induced Heterotopic Bone Formation by Enhancing Osteoclastogenesis via M2/Lipid-Loaded Macrophage Axis.

Heterotopic ossification (HO) is a double-edged sword. Pathological HO presents as an undesired clinical complication, whereas controlled heterotopic bone formation by synthetic osteoinductive materials shows promising therapeutic potentials for bone regeneration. However, the mechanism of material-induced heterotopic bone formation remains largely unknown. Early acquired HO being usually accompanied by severe tissue hypoxia prompts the hypothesis that hypoxia caused by the implantation coordinates serial cellular events and ultimately induces heterotopic bone formation in osteoinductive materials. The data presented herein shows a link between hypoxia, macrophage polarization to M2, osteoclastogenesis, and material-induced bone formation. Hypoxia inducible factor-1α (HIF-1α), a crucial mediator of cellular responses to hypoxia, is highly expressed in an osteoinductive calcium phosphate ceramic (CaP) during the early phase of implantation, while pharmacological inhibition of HIF-1α significantly inhibits M2 macrophage, subsequent osteoclast, and material-induced bone formation. Similarly, in vitro, hypoxia enhances M2 macrophage and osteoclast formation. Osteoclast-conditioned medium enhances osteogenic differentiation of mesenchymal stem cells, such enhancement disappears with the presence of HIF-1α inhibitor. Furthermore, metabolomics analysis reveals that hypoxia enhances osteoclastogenesis via the axis of M2/lipid-loaded macrophages. The current findings shed new light on the mechanism of HO and favor the design of more potent osteoinductive materials for bone regeneration.

Osteoinductive calcium phosphate with submicron topography as bone graft substitute for maxillary sinus floor augmentation: A translational study.

OBJECTIVES: The aim of this study was the preclinical and clinical evaluation of osteoinductive calcium phosphate with submicron surface topography as a bone graft substitute for maxillary sinus floor augmentation (MSFA). MATERIAL AND METHODS: A preclinical sheep model of MSFA was used to compare a calcium phosphate with submicron needle-shaped topography (BCPN , MagnetOs Granules, Kuros Biosciences BV) to a calcium phosphate with submicron grain-shaped topography (BCPG ) and autologous bone graft (ABG) as controls. Secondly, a 10-patient, prospective, randomized, controlled trial was performed to compare BCPN to ABG in MSFA with two-stage implant placement. RESULTS: The pre-clinical study demonstrated that both BCPN and BCPG were highly biocompatible, supported bony ingrowth with direct bone apposition against the material, and exhibited bone formation as early as 3 weeks post-implantation. However, BCPN demonstrated significantly more bone formation than BCPG at the study endpoint of 12 weeks. Only BCPN reached an equivalent amount of bone formation in the available space and a greater proportion of calcified material (bone + graft material) in the maxillary sinus compared to the "gold standard" ABG after 12 weeks. These results were validated in a small prospective clinical study, in which BCPN was found comparable to ABG in implant stability, bone height, new bone formation in trephine core biopsies, and overall clinical outcome. CONCLUSION: This translational work demonstrates that osteoinductive calcium phosphates are promising bone graft substitutes for MSFA, whereas their bone-forming potential depends on the design of their surface features. Netherlands Trial Register, NL6436.

Genesis of osteoclasts on calcium phosphate ceramics and their role in material-induced bone formation.

Innate immune responses play important roles in material-induced bone formation and such roles were further explored in the current study with an emphasis on M2 macrophages and osteoclastogenesis. With the presence of M-CSF and RANKL, M0 macrophages from FVB mouse bone marrow-derived monocytes (BMMs) fused to osteoclasts with both M2 marker and osteoclast marker at day 5, and such osteoclast formation at day 5 was enhanced when the cells were treated with IL-4 at day 3. With IL-4 treatment alone for 24 h, M0 polarized into M2 macrophages. Conditioned medium of M2 macrophages enhanced osteogenic differentiation of MC3T3-E1 (pre-osteoblasts) while osteoclast conditioned medium enhanced osteogenic differentiation of CRL-12424 (osteogenic precursors). TCPs (a typical osteoinductive material) supported M2 macrophage polarization at day 4 and osteoclast formation at day 5, while TCPb (a typical non-osteoinductive material) was less effective. Moreover, osteoclasts formed on TCPs produced osteogenic factors including S1P, Wnt10B and BMP-6, resulting osteogenic differentiation of CRL-12424 cells. Similar to in vitro testing, TCPs favored M2 macrophage polarization followed by the formation of osteoclasts in vivo, as compared to TCPb. The overall data provided evidence of a coupling between M2 macrophages, osteoclasts and material-induced bone formation: osteoclasts formed from M2 macrophages secrete osteogenic cytokines to induce osteogenic differentiation of osteogenic precursor cells to finally form bone. The current findings outlined a biological mechanism of material-induced bone formation and further rationalized the use of osteoinductive materials for bone regeneration. STATEMENT OF SIGNIFICANCE: This paper provides evidence for finding out the relationship between M2 macrophages, osteoclasts and osteogenesis in material-induced bone formation. It suggested that osteoinductive materials enhanced macrophage polarization to M2 macrophages which fuses to osteoclasts, osteoclasts subsequently secret osteogenic cytokines to differentiate finally osteogenic precursors to form bone in osteoinductive materials. The data supports scientifically the superiority of osteoinductive materials for bone regeneration in clinics.

Physico-Chemical Characteristics and Posterolateral Fusion Performance of Biphasic Calcium Phosphate with Submicron Needle-Shaped Surface Topography Combined with a Novel Polymer Binder.

A biphasic calcium phosphate with submicron needle-shaped surface topography combined with a novel polyethylene glycol/polylactic acid triblock copolymer binder (BCP-EP) was investigated in this study. This study aims to evaluate the composition, degradation mechanism and bioactivity of BCP-EP in vitro, and its in vivo performance as an autograft bone graft (ABG) extender in a rabbit Posterolateral Fusion (PLF) model. The characterization of BCP-EP and its in vitro degradation products showed that the binder hydrolyses rapidly into lactic acid, lactide oligomers and unaltered PEG (polyethylene glycol) without altering the BCP granules and their characteristic submicron needle-shaped surface topography. The bioactivity of BCP-EP after immersion in SBF revealed a progressive surface mineralization. In vivo, BCP-EP was assessed in a rabbit PLF model by radiography, manual palpation, histology and histomorphometry up to 12 weeks post-implantation. Twenty skeletally mature New Zealand (NZ) White Rabbits underwent single-level intertransverse process PLF surgery at L4/5 using (1) autologous bone graft (ABG) alone or (2) by mixing in a 1:1 ratio with BCP-EP (BCP-EP/ABG). After 3 days of implantation, histology showed the BCP granules were in direct contact with tissues and cells. After 12 weeks, material resorption and mature bone formation were observed, which resulted in solid fusion between the two transverse processes, following all assessment methods. BCP-EP/ABG showed comparable fusion rates with ABG at 12 weeks, and no graft migration or adverse reaction were noted at the implantation site nor in distant organs.

Serial cellular events in bone formation initiated by calcium phosphate ceramics.

To better understand the biological mechanisms triggered by osteoinductive materials in vivo, we evaluated the timeline of cellular responses to osteoinductive materials subcutaneously implanted in FVB mice. More F4/80-positive macrophages were present in osteoinductive tri-CaP ceramic (TCP) with submicron surface topography (TCPs) than non-osteoinductive TCP with micron surface topography (TCPb) at week 1. Moreover, TCPs (but not TCPb) significantly enhanced osteoclastogenesis, and induced macrophages to polarize from M1 to M2 in the first week. The time sequence and relevance of macrophages and osteoclasts responses involved in bone formation was then evaluated through peri-implant injection of specific chemicals in mice implanted with osteoinductive TCPs. Day-1 injection of clodronate liposomes (LipClod) depleted macrophages, inhibited macrophage polarization to M2, blocked osteoclastogenesis and bone formation, while the day-6 injection was less effective. Anti-RANKL antibody (aRANKL) did not affect macrophage colonization but inhibited osteoclastogenesis. Injection of aRANKL before week 2 aborted bone formation in TCPs, while injection at week 4 partially inhibited bone formation. The overall data show that following ectopic implantation, osteoinductive materials allow macrophage colonization in hours to days, macrophage polarization to M2 in days (within 7 days), osteoclastogenesis in weeks (e.g. in 2 weeks) and bone formation thereafter (after 4 weeks). The serial cellular events verified herein bring a new insight on material-induced bone formation and pave the way to further explore the mechanisms triggered by osteoinductive materials. STATEMENT OF SIGNIFICANCE: A series of key cellular events triggered by osteoinductive calcium phosphate ceramic was revealed: macrophages colonized within hours to days, polarization of M2 macrophages occurred within 7 days, osteoclastogenesis mainly occurred in weeks (e.g. in 2 weeks) and bone formation finally arose thereafter (after 4 weeks). Moreover, such time sequence of cellular events was confirmed with specific chemicals (clodronate liposomes and anti-RANKL antibody). The findings verified herein bring a new insight on material-induced bone formation and pave the way to further explore the mechanisms triggered by osteoinductive materials.

CD38-specific Chimeric Antigen Receptor Expressing Natural Killer KHYG-1 Cells: A Proof of Concept for an "Off the Shelf" Therapy for Multiple Myeloma.

Chimeric antigen receptor (CAR) T cells are highly successful in the treatment of hematologic malignancies. We recently generated affinity-optimized CD38CAR T cells, which effectively eliminate multiple myeloma (MM) cells with little or no toxicities against nonmalignant hematopoietic cells. The lack of universal donors and long manufacturing times however limit the broad application of CAR T cell therapies. Natural killer (NK) cells generated from third party individuals may represent a viable source of "off the shelf" CAR-based products, as they are not associated with graft-versus-host disease unlike allogeneic T cells. We therefore explored the preclinical anti-MM efficacy and potential toxicity of the CD38CAR NK concept by expressing affinity-optimized CD38CARs in KHYG-1 cells, an immortal NK cell line with excellent expansion properties. KHYG-1 cells retrovirally transduced with the affinity-optimized CD38CARs expanded vigorously and mediated effective CD38-dependent cytotoxicity towards CD38high MM cell lines as well as primary MM cells ex vivo. Importantly, the intermediate affinity CD38CAR transduced KHYG-1 cells spared CD38neg or CD38int nonmalignant hematopoietic cells, indicating an optimal tumor nontumor discrimination. Irradiated, short living CD38CAR KHYG-1 cells also showed significant anti-MM effects in a xenograft model with a humanized bone marrow-like niche. Finally, CD38CAR KHYG-1 cells effectively eliminated primary MM cells derived from patients who are refractory to CD38 antibody daratumumab. Taken together, the results of this proof-of-principle study demonstrate the potential value of engineering affinity-optimized CD38CARs in NK cells to establish effective anti-MM effects, with an excellent safety profile, even in patients who failed to response to most advanced registered myeloma therapies, such as daratumumab.

Macrophage polarization plays roles in bone formation instructed by calcium phosphate ceramics.

To investigate the roles of macrophages in material-instructed bone formation, two calcium phosphate (TCP) ceramics with the same chemistry but various scales of surface topography were employed in this study. After being implanted subcutaneously in FVB mice for 8 weeks, TCPs (TCP ceramics with submicron surface topography) gave rise to bone formation, while TCPb (TCP ceramics with micron surface topography) did not, showing the crucial role of surface topography scale in material-instructed bone formation. Depletion of macrophages with liposomal clodronate (LipClod) blocked such bone formation instructed by TCPs, confirming the role of macrophages in material-instructed bone formation. Macrophage cells (i.e. RAW 264.7 cells) cultured on TCPs in vitro polarized to tissue repair macrophages as evidenced by gene expression and cytokine production, while polarizing to pro-inflammatory macrophages on TCPb. Submicron surface topography of TCP ceramics directed macrophage polarization via PI3K/AKT pathways with the synergistic regulation of integrin ß1. Finally, the tissue repair macrophage polarization on TCPs resulted in osteogenic differentiation of mesenchymal stem cells in vitro. At early implantation in FVB mice, TCPs recruited more macrophages which polarized towards tissue repair macrophages with time. The present data demonstrate the important roles of macrophage polarization in bone formation instructed by calcium phosphate ceramics.

Bone Morphogenetic Protein 4 Gene Therapy in Mice Inhibits Myeloma Tumor Growth, But Has a Negative Impact on Bone.

Multiple myeloma is characterized by accumulation of malignant plasma cells in the bone marrow. Most patients suffer from an osteolytic bone disease, caused by increased bone degradation and reduced bone formation. Bone morphogenetic protein 4 (BMP4) is important for both pre- and postnatal bone formation and induces growth arrest and apoptosis of myeloma cells. BMP4-treatment of myeloma patients could have the potential to reduce tumor growth and restore bone formation. We therefore explored BMP4 gene therapy in a human-mouse model of multiple myeloma where humanized bone scaffolds were implanted subcutaneously in RAG2-/- γC-/-mice. Mice were treated with adeno-associated virus serotype 8 BMP4 vectors (AAV8-BMP4) to express BMP4 in the liver. When mature BMP4 was detectable in the circulation, myeloma cells were injected into the scaffolds and tumor growth was examined by weekly imaging. Strikingly, the tumor burden was reduced in AAV8-BMP4 mice compared with the AAV8-CTRL mice, suggesting that increased circulating BMP4 reduced tumor growth. BMP4-treatment also prevented bone loss in the scaffolds, most likely due to reduced tumor load. To delineate the effects of BMP4 overexpression on bone per se, without direct influence from cancer cells, we examined the unaffected, non-myeloma femurs by µCT. Surprisingly, the AAV8-BMP4 mice had significantly reduced trabecular bone volume, trabecular numbers, as well as significantly increased trabecular separation compared with the AAV8-CTRL mice. There was no difference in cortical bone parameters between the two groups. Taken together, BMP4 gene therapy inhibited myeloma tumor growth, but also reduced the amount of trabecular bone in mice. Our data suggest that care should be taken when considering using BMP4 as a therapeutic agent. © 2019 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

MagnetOs, Vitoss, and Novabone in a Multi-endpoint Study of Posterolateral Fusion: A True Fusion or Not?

STUDY DESIGN: This study was a multi-endpoint analysis of bone graft substitutes implanted as a standalone graft in a clinically relevant Ovine model of instrumented posterolateral spinal fusion (PLF). OBJECTIVE: The objective of this study was to obtain high-quality evidence on the efficacy of commercial bone graft substitutes compared with autograft in instrumented PLF using a state-of-the-art model with a complete range of assessment techniques. SUMMARY OF BACKGROUND DATA: Preclinical and clinical data on the quality of spinal fusions obtained with bone graft substitutes are often limited. Calcium phosphates with submicron topography have shown promising results in PLF, as these are able to induce bone formation in tissues distant from the host bone, which facilitates bony union. METHODS: Nine female, skeletally mature sheep (4-5 y) underwent posterior pedicle screw/rods instrumented PLF at L2-L3 and L4-L5 using the following bone graft materials as a standalone graft per spinal segment: (1) biphasic calcium phosphate with submicron topography (BCP<µm), (2) 45S5 Bioglass (BG), and (3) collagen-ß-tricalcium phosphate with a 45S5 Bioglass adjunct (TCP/BG). Autograft bone (AB) was used as a positive control treatment. Twelve weeks after implantation, the spinal segments were evaluated by fusion assessment (manual palpation, x-ray, micro-computed tomography, and histology), fusion mass volume quantification (micro-computed tomography), range of motion (ROM) testing, histologic evaluation, and histomorphometry. RESULTS: Fusion assessment revealed equivalence between AB and BCP<µm by all fusion assessment methods, whereas BG and TCP/BG led to significantly inferior results. Fusion mass volume was highest for BCP<µm, followed by AB, BG, and TCP/BG. ROM testing determined equivalence for spinal levels treated with AB and BCP<µm, while BG and TCP/BG exhibited higher ROM. Histologic evaluation revealed substantial bone formation in the intertransverse regions for AB and BCP<µm, whereas BG and TCP/BG grafts contained fibrous tissue and minimal bone formation. Histologic observations were supported by the histomorphometry data. CONCLUSIONS: This study reveals clear differences in efficacy between commercially available bone graft substitutes, emphasizing the importance of clinically relevant animal models with multiendpoint analyses for the evaluation of bone graft materials. The results corroborate the efficacy of calcium phosphate with submicron topography, as this was the only material that showed equivalent performance to autograft in achieving spinal fusion.

Efficacy of a synthetic calcium phosphate with submicron surface topography as autograft extender in lapine posterolateral spinal fusion.

Posterolateral spinal fusion (PLF) is a common procedure in orthopedic surgery that is performed to fuse adjacent vertebrae to reduce symptoms related to spinal conditions. In the current study, a novel synthetic calcium phosphate with submicron surface topography was evaluated as an autograft extender in a validated rabbit model of PLF. Fifty-nine skeletally mature New Zealand white rabbits were divided into three groups and underwent single-level intertransverse process PLF at L4-5 using (1) autologous bone graft (ABG) alone or in a 1:1 combination with (2) calcium phosphate granules (ABG/BCPgranules ), or (3) granules embedded in a fast-resorbing polymeric carrier (ABG/BCPputty ). After 6, 9, and 12 weeks, animals were sacrificed and spinal fusion was assessed by manual palpation, Radiographs, micro-CT, mechanical testing (12 weeks only), histology, and histomorphometry. Based on all endpoints, all groups showed a gradual progression in bone formation and maturation during time, leading to solid fusion masses between the transverse processes after 12 weeks. Fusion assessments by manual palpation, radiography and histology were consistent and demonstrated equivalent fusion rates between groups, with high bilateral fusion rates after 12 weeks. Mechanical tests after 12 weeks indicated substantially lower range of motion for all groups, compared to non-operated controls. By histology and histomorphometry, the gradual formation and maturation of bone in the fusion mass was confirmed for each graft type. With these results, we describe the equivalent performance between autograft and a novel calcium phosphate material as an autograft extender in a rabbit model of PLF using an extensive range of evaluation techniques. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2080-2090, 2019.

Modulating Bone Regeneration in Rabbit Condyle Defects with Three Surface-Structured Tricalcium Phosphate Ceramics.

Tricalcium phosphate (TCP) ceramics are used as bone void fillers because of their bioactivity and resorbability, while their performance in bone regeneration and material resorption vary with their physical properties (e.g., the dimension of the crystal grain). Herein, three TCP ceramic bone substitutes (TCP-S, TCP-M, and TCP-L) with gradient crystal grain size (0.77 ± 0.21 µm for TCP-S, 1.21 ± 0.35 µm for TCP-M and 4.87 ± 1.90 µm for TCP-L), were evaluated in a well-established rabbit lateral condylar defect model (validated with sham) with respect to bone formation and material resorption up to 26 weeks. Surface structure-dependent bone regeneration was clearly shown after 4 weeks implantation with TCP-S having most mineralized bone (20.2 ± 3.4%), followed by TCP-M (14.0 ± 3.5%), sham (8.1 ± 4.2%), and TCP-L (6.6 ± 2.6%). Afterward, the amount of mineralized bone was similar in all the three groups, but bone marrow and material resorption varied. After 26 weeks, TCP-S induced most bone tissue formation (mineralized bone + bone marrow) (61.6 ± 7.8%) and underwent most material resorption (80.1 ± 9.0%), followed by TCP-M (42.9 ± 5.2% and 61.4 ± 8.0% respectively), TCP-L (28.3 ± 5.5% and 45.6 ± 9.7% respectively), and sham (25.7 ± 4.2%). Given the fact that the three ceramics are chemically identical, the results indicate that the surface structure (especially, the crystal grain size) of TCP ceramics can greatly tune their bone regeneration potential and the material resorption in rabbit condyle defect model, with the submicron surface structured TCP ceramic performing the best.

Biphasic calcium phosphate with submicron surface topography in an Ovine model of instrumented posterolateral spinal fusion.

As spinal fusions require large volumes of bone graft, different bone graft substitutes are being investigated as alternatives. A subclass of calcium phosphate materials with submicron surface topography has been shown to be a highly effective bone graft substitute. In this work, a commercially available biphasic calcium phosphate (BCP) with submicron surface topography (MagnetOs; Kuros Biosciences BV) was evaluated in an Ovine model of instrumented posterolateral fusion. The material was implanted stand-alone, either as granules (BCPgranules) or as granules embedded within a fast-resorbing polymeric carrier (BCPputty) and compared to autograft bone (AG). Twenty-five adult, female Merino sheep underwent posterolateral fusion at L2-3 and L4-5 levels with instrumentation. After 6, 12, and 26 weeks, outcomes were evaluated by manual palpation, range of motion (ROM) testing, micro-computed tomography, histology and histomorphometry. Fusion assessment by manual palpation 12 weeks after implantation revealed 100% fusion rates in all treatment groups. The three treatment groups showed a significant decrease in lateral bending at the fusion levels at 12 weeks (P < 0.05) and 26 weeks (P < 0.001) compared to the 6 week time-point. Flexion-extension and axial rotation were also reduced over time, but statistical significance was only reached in flexion-extension for AG and BCPputty between the 6 and 26 week time-points (P < 0.05). No significant differences in ROM were observed between the treatment groups at any of the time-points investigated. Histological assessment at 12 weeks showed fusion rates of 75%, 92%, and 83% for AG, BCPgranules and BCPputty, respectively. The fusion rates were further increased 26 weeks postimplantation. Similar trends of bone growth were observed by histomorphometry. The fusion mass consisted of at least 55% bone for all treatment groups 26 weeks after implantation. These results suggest that this BCP with submicron surface topography, in granules or putty form, is a promising alternative to autograft for spinal fusion.

Variation of the bone forming ability with the physicochemical properties of calcium phosphate bone substitutes.

Because of their bioactive properties and chemical similarity to the inorganic component of bone, calcium phosphate (CaP) materials are widely used for bone regeneration. Six commercially available CaP bone substitutes (Bio-Oss, Actifuse, Bi-Ostetic, MBCP, Vitoss and chronOs) as well as two tricalcium phosphate (TCP) ceramics with either a micron-scale (TCP-B) or submicron-scale (TCP-S) surface structure are characterized and their bone forming potential is evaluated in a canine ectopic implantation model. After 12 weeks of implantation in the paraspinal muscle of four beagles, sporadic bone (0.1 ± 0.1%) is observed in two Actifuse implants (2/4), limited bone (2.1 ± 1.4%) in four MBCP implants (4/4) and abundant bone (21.6 ± 4.5%) is formed in all TCP-S implants (4/4). Bone is not observed in any of the Bio-Oss, Bi-Ostetic, Vitoss, chronOs and TCP-B implants (0/4). When correlating the bone forming potential with the physicochemical properties of each material, we observe that the physical characteristics (e.g. grain size and micropore size at the submicron scale) might be the dominant trigger of material directed bone formation via specific mechanotransduction, instead of protein adsorption, surface mineralization and calcium ion release.

Topography of calcium phosphate ceramics regulates primary cilia length and TGF receptor recruitment associated with osteogenesis.

The surface topography of synthetic biomaterials is known to play a role in material-driven osteogenesis. Recent studies show that TGFß signalling also initiates osteogenic differentiation. TGFß signalling requires the recruitment of TGFß receptors (TGFßR) to the primary cilia. In this study, we hypothesize that the surface topography of calcium phosphate ceramics regulates stem cell morphology, primary cilia structure and TGFßR recruitment to the cilium associated with osteogenic differentiation. We developed a 2D system using two types of tricalcium phosphate (TCP) ceramic discs with identical chemistry. One sample had a surface topography at micron-scale (TCP-B, with a bigger surface structure dimension) whilst the other had a surface topography at submicron scale (TCP-S, with a smaller surface structure dimension). In the absence of osteogenic differentiation factors, human bone marrow stromal cells (hBMSCs) were more spread on TCP-S than on TCP-B with alterations in actin organization and increased primary cilia prevalence and length. The cilia elongation on TCP-S was similar to that observed on glass in the presence of osteogenic media and was followed by recruitment of transforming growth factor-ß RII (p-TGFß RII) to the cilia axoneme. This was associated with enhanced osteogenic differentiation of hBMSCs on TCP-S, as shown by alkaline phosphatase activity and gene expression for key osteogenic markers in the absence of additional osteogenic growth factors. Similarly, in vivo after a 12-week intramuscular implantation in dogs, TCP-S induced bone formation while TCP-B did not. It is most likely that the surface topography of calcium phosphate ceramics regulates primary cilia length and ciliary recruitment of p-TGFß RII associated with osteogenesis and bone formation. This bioengineering control of osteogenesis via primary cilia modulation may represent a new type of biomaterial-based ciliotherapy for orthopedic, dental and maxillofacial surgery applications. STATEMENT OF SIGNIFICANCE: The surface topography of synthetic biomaterials plays important roles in material-driven osteogenesis. The data presented herein have shown that the surface topography of calcium phosphate ceramics regulates mesenchymal stromal cells (e.g., human bone marrow mesenchymal stromal cells, hBMSCs) with respect to morphology, primary cilia structure and TGFßR recruitment to the cilium associated with osteogenic differentiation in vitro. Together with bone formation in vivo, our results suggested a new type of biomaterial-based ciliotherapy for orthopedic, dental and maxillofacial surgery by the bioengineering control of osteogenesis via primary cilia modulation.

Genetically engineered mesenchymal stromal cells produce IL-3 and TPO to further improve human scaffold-based xenograft models.

Recently, NOD-SCID IL2Rγ-/- (NSG) mice were implanted with human mesenchymal stromal cells (MSCs) in the presence of ceramic scaffolds or Matrigel to mimic the human bone marrow (BM) microenvironment. This approach allowed the engraftment of leukemic samples that failed to engraft in NSG mice without humanized niches and resulted in a better preservation of leukemic stem cell self-renewal properties. To further improve our humanized niche scaffold model, we genetically engineered human MSCs to secrete human interleukin-3 (IL-3) and thrombopoietin (TPO). In vitro, these IL-3- and TPO-producing MSCs were superior in expanding human cord blood (CB) CD34+ hematopoietic stem/progenitor cells. MLL-AF9-transduced CB CD34+ cells could be transformed efficiently along myeloid or lymphoid lineages on IL-3- and TPO-producing MSCs. In vivo, these genetically engineered MSCs maintained their ability to differentiate into bone, adipocytes, and other stromal components. Upon transplantation of MLL-AF9-transduced CB CD34+ cells, acute myeloid leukemia (AML) and acute lymphoblastic leukemia (ALL) developed in engineered scaffolds, in which a significantly higher percentage of myeloid clones was observed in the mouse compartments compared with previous models. Engraftment of primary AML, B-cell ALL, and biphenotypic acute leukemia (BAL) patient samples was also evaluated, and all patient samples could engraft efficiently; the myeloid compartment of the BAL samples was better preserved in the human cytokine scaffold model. In conclusion, we show that we can genetically engineer the ectopic human BM microenvironment in a humanized scaffold xenograft model. This approach will be useful for functional study of the importance of niche factors in normal and malignant human hematopoiesis.

Cells responding to surface structure of calcium phosphate ceramics for bone regeneration.

Surface structure largely affects the inductive bone-forming potential of calcium phosphate (CaP) ceramics in ectopic sites and bone regeneration in critical-sized bone defects. Surface-dependent osteogenic differentiation of bone marrow stromal cells (BMSCs) partially explained the improved bone-forming ability of submicron surface structured CaP ceramics. In this study, we investigated the possible influence of surface structure on different bone-related cells, which may potentially participate in the process of improved bone formation in CaP ceramics. Besides BMSCs, the response of human brain vascular pericytes (HBVP), C2C12 (osteogenic inducible cells), MC3T3-E1 (osteogenic precursors), SV-HFO (pre-osteoblasts), MG63 (osteoblasts) and SAOS-2 (mature osteoblasts) to the surface structure was evaluated in terms of cell proliferation, osteogenic differentiation and gene expression. The cells were cultured on tricalcium phosphate (TCP) ceramics with either micron-scaled surface structure (TCP-B) or submicron-scaled surface structure (TCP-S) for up to 14 days, followed by DNA, alkaline phosphatase (ALP) and quantitative polymerase chain reaction gene assays. HBVP were not sensitive to surface structure with respect to cell proliferation and osteogenic differentiation, but had downregulated angiogenesis-related gene expression (i.e. vascular endothelial growth factor) on TCP-S. Without additional osteogenic inducing factors, submicron-scaled surface structure enhanced ALP activity and osteocalcin gene expression of human (h)BMSCs and C2C12 cells, favoured the proliferation of MC3T3-E1, MG63 and SAOS-2, and increased ALP activity of MC3T3-E1 and SV-HFO. The results herein indicate that cells with osteogenic potency (either osteogenic inducible cells or osteogenic cells) could be sensitive to surface structure and responded to osteoinductive submicron-structured CaP ceramics in cell proliferation, ALP production or osteogenic gene expression, which favour bone regeneration. Copyright © 2017 John Wiley & Sons, Ltd.

* Comparison of Two Moldable Calcium Phosphate-Based Bone Graft Materials in a Noninstrumented Canine Interspinous Implantation Model.

There is a continuing search for novel synthetic materials as an alternative to autologous bone grafting. Different technologies are explored to promote bone formation, which include the addition of BioGlass™ particles in calcium phosphate (CaP)-based materials and the use of surface modification in the form of submicron surface topographies. In this work, we aimed at comparing the bone formation in a noninstrumented canine interspinous model of moldable formulations of a submicron-surface structured tricalcium phosphate/alkylene oxide copolymer (CaP/AOC) or a tricalcium phosphate/BioGlass/collagen (CaP/BG/C) bone graft material. Intramuscular implantation was carried out as well to evaluate soft tissue responses. Eight mature male mongrel dogs underwent single-level, noninstrumented interspinous implantation, where the bone graft materials were implanted at either side of the spinous processes (L3-L4), with separation by the interspinous ligament ensuring comparison of both materials in each animal (n = 8 per material). The materials were also implanted in paraspinal muscle pouches. Animals were euthanized 12 weeks after surgery and the lumbar spines excised and intramuscular implants retrieved. Undecalcified sections were prepared for histological evaluation and histomorphometry was performed to quantify bone formation and material resorption. After 12 weeks, all submicron structured CaP/AOC implants showed abundant bone formation in the (L3-L4) interspinous space (20.8% ± 6.8%), whereas bone was not found in the CaP/BG/C implants (0% ± 0%). Intramuscularly, the CaP/AOC material triggered significant bone formation (12.0% ± 7.8%), whereas CaP/BG/C did not form any bone. In both the spinal and muscular sites, resorption of the CaP/AOC material was evident by a decrease in Feret diameter of the CaP granules as well as in their histological surface compared with the starting material, whereas CaP/BG/C material had a milder resorption. This study shows that a submicron-surface structured CaP/AOC bone graft material has superior bone-forming properties in both an interspinous implantation model and intramuscularly, as compared with a CaP/BG/C bone graft material.