Texture Analysis of Temporomandibular Joint Disc Changes Associated with Effusion Using Magnetic Resonance Images.

The purpose of this study was to identify changes in the temporomandibular joint disc affected by effusion by using texture analysis of magnetic resonance images (MRIs). METHODS: A total of 223 images of the TMJ, 42 with joint effusion and 181 without, were analyzed. Three consecutive slices were then exported to MaZda software, in which two oval ROIs (one in the anterior band and another in the intermediate zone of the joint disc) were determined in each slice and eleven texture parameters were calculated by using a gray-level co-occurrence matrix. Spearman's correlation coefficient test was used to assess the correlation between texture variables and to select variables for analysis. The Mann-Whitney test was used to compare the groups. RESULTS: The significance level was set at 5%, with the results demonstrating that there was no high correlation between the parameter directions. It was possible to observe a trend between the average parameters, in which the group with effusion always had smaller values than the group without effusion, except for the parameter measuring the difference in entropy. CONCLUSION: The trend towards lower overall values for the texture parameters suggested a different behavior between TMJ discs affected by effusion and those not affected, indicating that there may be intrinsic changes.

Magnetic resonance imaging evaluation of the disc morphology of temporomandibular joint in patients with severe hemophilia.

OBJECTIVES: This study aimed to assess the morphological differences in the articular disc (AD) between hemophilic patients and healthy individuals of the control group for further association with signs and symptoms. METHODS: Fourteen severe hemophilic patients had their AD evaluated by magnetic resonance imaging (MRI). The morphological findings were compared to those of a control group consisting of 14 healthy individuals. MRI was used to evaluate all the components of the temporomandibular (TMJ), including the AD, resulting in sequential T1-weighted parasagittal images. All the images were acquired with teeth in maximum intercuspation position. RESULTS: Morphological alterations showed significant statistical differences (P-value = 0.0068), whereas no statistical differences were found in the other variables, including TMJ pain, headache, bruxism and mouth opening limitation. In the group of non-hemophilic individuals, only two (14.29%) presented AD with non-biconcave features, whereas in the group of hemophilic patients, nine (64.29%) presented AD with a morphology other than biconcave. CONCLUSIONS: In patients with severe hemophilia, there seems to be a pattern of morphological alterations in the articular disc over time. The standard biconcave morphology of AD tends to change into other ones, particularly biplanar, hemiconvex and folded.

Cone-beam computed tomography texture analysis can help differentiate odontogenic and non-odontogenic maxillary sinusitis.

Purpose: This study aimed to assess texture analysis (TA) of cone-beam computed tomography (CBCT) images as a quantitative tool for the differential diagnosis of odontogenic and non-odontogenic maxillary sinusitis (OS and NOS, respectively). Materials and Methods: CBCT images of 40 patients diagnosed with OS (N=20) and NOS (N=20) were evaluated. The gray level co-occurrence (GLCM) matrix parameters, and gray level run length matrix texture (GLRLM) parameters were extracted using manually placed regions of interest on lesion images. Seven texture parameters were calculated using GLCM and 4 parameters using GLRLM. The Mann-Whitney test was used for comparisons between the groups, and the Levene test was performed to confirm the homogeneity of variance (α=5%). Results: The results showed statistically significant differences (P<0.05) between the OS and NOS patients regarding 3 TA parameters. NOS patients presented higher values for contrast, while OS patients presented higher values for correlation and inverse difference moment. Greater textural homogeneity was observed in the OS patients than in the NOS patients, with statistically significant differences in standard deviations between the groups for correlation, sum of squares, sum of entropy, and entropy. Conclusion: TA enabled quantitative differentiation between OS and NOS on CBCT images by using the parameters of contrast, correlation, and inverse difference moment.

Magnetic resonance imaging texture analysis for quantitative evaluation of the mandibular condyle in juvenile idiopathic arthritis.

OBJECTIVES: Juvenile idiopathic arthritis (JIA) is a chronic inflammatory disease that affects the joints and other organs, including the development of the former in a growing child. This study aimed to evaluate the feasibility of texture analysis (TA) based on magnetic resonance imaging (MRI) to provide biomarkers that serve to identify patients likely to progress to temporomandibular joint damage by associating JIA with age, gender and disease onset age. METHODS: The radiological database was retrospectively reviewed. A total of 45 patients were first divided into control group (23) and JIA group (22). TA was performed using grey-level co-occurrence matrix (GLCM) parameters, in which 11 textural parameters were calculated using MaZda software. These 11 parameters were ranked based on the p value obtained with ANOVA and then correlated with age, gender and disease onset age. RESULTS: Significant differences in texture parameters of condyle were demonstrated between JIA group and control group (p < 0.05). There was a progressive loss of uniformity in the grayscale pixels of MRI with an increasing age in JIA group. CONCLUSIONS: MRI TA of the condyle can make it possible to detect the alterations in bone marrow of patients with JIA and promising tool which may help the image analysis.

In vivo study of cone beam computed tomography texture analysis of mandibular condyle and its correlation with gender and age.

OBJECTIVE: Texture analysis is an image processing method that aims to assess the distribution of gray-level intensity and spatial organization of the pixels in the image. The purpose of this study was to investigate whether the texture analysis applied to cone beam computed tomography (CBCT) images could detect variation in the condyle trabecular bone of individuals from different age groups and genders. METHODS: The sample consisted of imaging exams from 63 individuals divided into three groups according to age groups of 03-13, 14-24 and 25-34. For texture analysis, the MaZda® software was used to extract the following parameters: second angular momentum, contrast, correlation, sum of squares, inverse difference moment, sum entropy and entropy. Statistical analysis was performed using Mann-Whitney test for gender and Kruskal-Wallis test for age (P = 5%). RESULTS: No statistically significant differences were found between age groups for any of the parameters. Males had lower values for the parameter correlation than those of females (P < 0.05). CONCLUSION: Texture analysis proved to be useful to discriminate mandibular condyle trabecular bone between genders.

Biological and chemical properties of five mineral oxides and of mineral trioxide aggregate repair high plasticity: an in vitro study.

Calcium silicate-based cements have diverse applications in endodontics. This study aimed to evaluate the antibiofilm action, biocompatibility, morphological structure, chemical composition and radiopacity of Five Mineral Oxides (5MO), Mineral Trioxide Aggregate Repair High Plasticity (MTA Repair HP), and Mineral Trioxide Aggregate (MTA) cements. MTT analysis was used to test the antibiofilm action of these cements against five anaerobic microorganisms, and test their biocompatibility with mouse macrophage (RAW 264.7) and osteoblasts (MG-63) cultures. Their morphological structure and chemical composition were evaluated by scanning electron microscopy (SEM) coupled to energy dispersion X-ray spectroscopy (EDX), and the phase analysis was performed by X-ray diffraction (XRD). Conventional radiography was used to assess the radiopacity of the cements. 5MO, MTA Repair HP and MTA were effective against Porphyromonas gingivalis, Parvimonas micra, Fusobacterium nucleatum and Prevotella intermedia, they were biocompatible with macrophages and osteoblasts after 5 min of contact, and they had adequate radiopacity to be used clinically. Bismuth oxide (Bi2O3) is used as a radiopacifier in MTA and 5MO, and calcium tungstate, in MTA Repair HP. Titanium dioxide (TiO2) (ANATASE) is responsible for the antimicrobial action and biocompatibility of 5MO.

Fracture resistance and biomechanical behavior of different access cavities of maxillary central incisors restored with different composite resins.

OBJECTIVES: The aim of this study was to compare the effect of three different access cavities on the tissue removal, deflection, fracture resistance, and stress distribution of extracted maxillary central incisors. MATERIALS AND METHODS: Forty human maxillary central incisors were randomly assigned in four experimental group (n = 10) including conservative access cavity "CAC," traditional access cavity "TAC," invasive access cavity "IAC," and without access cavity (control group). Cone-beam computed tomography "CBCT" scans were used to evaluate the tissue removal during the different access cavities. All specimens were restored with composite resin (Admira Fusion, Voco, Cuxhaven, Germany) and embedded in acrylic resin blocks after simulating the periodontal ligament using red wax, then the specimens were submitted to the deflection test applying a load of 250 N and to the load-to-fracture test after artificial aging in a mechanical cycling machine (150 N, 5 × 106 cycles, 10 Hz). Lastly, stress distribution was assessed by three-dimensional finite element analysis (3D-FEA), simulating the specimens restoration by two types of composite resins of low and high elastic modulus (8 and 18 GPa respectively) after the access cavities. The data were submitted to Shapiro-Wilk and KS normality tests. Then, they were analyzed by one-way ANOVA and Tukey tests with a significance level (α ≤ 0.05). RESULTS: CBCT scans showed a significant difference of worn tissues in CAC and TAC when compared to the IAC (P < 0.0001). In deflection test, CAC showed lower deformation values than the TAC and IAC. Load-to-fracture test presented no significant difference among the three experimental groups (P = 0.6901). 3D-FEA showed that the more conservative the access cavity, the higher the stress magnitude. CONCLUSIONS: CAC promote less worn tissue; however, this does not improve the stress distribution or fracture resistance of endodontically treated maxillary incisors. CLINICAL RELEVANCE: Clinicians should reconsider the pros and cons of the conservative access cavity.

In Vitro Quantitative Evaluation of Postprocessing Filter for Metal Artifact Reduction in Cone Beam Computed Tomography Images of Titanium and Zirconium Dioxide Implants.

Objective: To evaluate a postprocessing filter of a new imaging-processing software for analysis of metal artifact reduction. Methods: Eight artificial edentulous mandibles (phantoms), where titanium and zirconium dioxide implants had been installed in four different regions (i.e., incisors, canine, premolars, and molars). CBCT volume was acquired, and then, four types of filters were applied to the images: BAR filter and Multi-CDT NR filter (e-Vol DX) and Sharpening Filters 1x and 2x (OnDemand). Artifact was assessed by measuring the standard deviation (SD) of the gray values of filtered and unfiltered images. The comparison between implant material, teeth, and filters was performed by using ANOVA, whereas multiple comparisons were performed by using Bonferroni's test. The level of significance adopted was 5%. Results: The results showing higher SD values, which suggests a worse image, were obtained with titanium implants compared to zirconium dioxide ones. With regard to the four filters used, it can be seen that the lowest SD values were obtained with BAR and Multi-CDT NR filters and the highest with Sharpening Filters 1x and 2x, with no statistical difference between them, except regarding the molar region in titanium implants. Conclusion: The highest SD values were seen in zirconium dioxide implants, mainly in the region of anterior teeth. The BAR filter was found to be the most effective as its SD value decreased significantly, indicating that the image quality was improved.

Temporomandibular joint in juvenile idiopathic arthritis: magnetic resonance imaging measurements and their correlation with imaging findings.

OBJECTIVE: The aim of this study was to investigate the TMJ components in patients with juvenile idiopathic arthritis (JIA) and to compare them with a control group based on magnetic resonance imaging (MRI) measurements. METHODS: This study comprised an assessment of MRI measurements of 96 temporomandibular joints (TMJ) following classification criteria set by the International League of Associations for Rheumatology (ILAR). Three measurements were considered for study: condyle excursion angle (CEA), height of articular eminence (HAE) and inclination of articular eminence (IAE). All TMJs were assessed by linear measurements made by using the OnDemand 3D software. The comparison between the groups was performed by using Mann-Whitney's test. RESULTS: Lower measurement values were found for IAE, HAE and CEA in JIA patients (P-values < 0.001, 0.005 and < 0.001, respectively). CONCLUSION: The study showed the differences in MRI measurements between JIA patients and controls, with the former with the lowest indices.

Eccentric movements of temporomandibular joint and upper airway volume: Three-dimensional segmentation using cone beam computed tomography.

Objective: The purpose of the present investigation was to assess whether possible changes in the dynamic movements of the TMJ might cause a greater variation between the volumes of the upper airways in open- and closed-mouth positions.Methods: CBCT scans of 92 subjects were used to assess the TMJ bilaterally. All scans were acquired in closed (CM) and maximum mouth opening (MMO) positions. The difference in the volume of the oropharyngeal cavity obtained by subtracting the CM volume from the MMO volume (delta volume or volume variation) was calculated. The resulting volume was analyzed by Mann-Whitney test for variation in rotation.Results: A significant difference was found (p-value = 0.0188) on the right side regarding changes in the rotational movement of the condyle (Mann-Whitney test).Conclusion: This study showed a relationship between degree of abnormal or limited rotation and variation in the upper airway volume on one side.

Analysis of geometrical tomographic parameters of furcation lesions in periodontitis patients.

OBJECTIVES: This study was aimed to investigate the relationship between geometric parameters of furcation lesions - maximum area of lesion opening (MALO), angle formed between the roots (ABR), lesion volume (LV) and presence and height of infra-osseous defects (IOD) - and the success of therapy with enamel matrix derivative proteins (EMD) in patients with grade C periodontitis, using cone-beam computed tomography (CBCT). METHODS: The study consisted of two groups of patients with grade C periodontitis: control (surgery) (n = 17) and test (surgery + EMD) (n = 17). Images parameters on CBCT were recorded using OnDemand3D and ITK-SNAP software. RESULTS: Pearson's correlation coefficient demonstrated that only IOD was statistically significant in the probing depth PD (P = 0.01), with a moderate positive correlation (R = 0.59). MALO was found to be statistically significant (P = 0.03) in the test group (surgery + EMD), with moderate negative correlation (R = -0.5). CONCLUSION: The presence of infra-osseous defects and height were relevant in relation to the success of the type of treatment addressed in this study.

Characteristics of radiographic images acquired with CdTe, CCD and CMOS detectors in skull radiography.

PURPOSE: The purpose of this study was to evaluate the image quality, diagnostic efficacy, and radiation dose associated with the use of a cadmium telluride (CdTe) detector, compared to charge-coupled device (CCD) and complementary metal oxide semiconductor (CMOS) detectors. MATERIALS AND METHODS: Lateral cephalographs of a phantom (type 1) composed of synthetic polymer filled with water and another phantom (type 2) composed of human skull macerated with polymer coating were obtained with CdTe, CCD, and CMOS detectors. Dosimeters placed on the type 2 phantom were used to measure radiation. Noise levels from each image were also measured. McNamara cephalometric analysis was conducted, the dentoskeletal configurations were assessed, and a subjective evaluation of image quality was conducted. Parametric data were compared via 1-way analysis of variance with the Tukey post-hoc test, with a significance level of 5%. Subjective image quality and dentoskeletal configuration were described qualitatively. RESULTS: A statistically significant difference was found among the images obtained with the 3 detectors (P<0.05), with the lowest noise level observed among the images obtained with the CdTe detector and a higher subjective preference demonstrated for those images. For the cephalometric analyses, no significant difference (P>0.05) was observed, and perfect agreement was seen with regard to the classifications obtained from the images acquired using the 3 detectors. The radiation dose associated with the CMOS detector was higher than the doses associated with the CCD (P<0.05) and CdTe detectors (P<0.05). CONCLUSION: Considering the evaluated parameters, the CdTe detector is recommended for use in clinical practice.

Subjective analysis of the application of enhancement filters on magnetic resonance imaging of the temporomandibular joint.

OBJECTIVE: The aim of this study was to investigate the effect of enhancement filters on magnetic resonance imaging (MRI) of the temporomandibular joint (TMJ). STUDY DESIGN: In total, 66 MRI scans of the TMJ were analyzed without filtration and with the application of 2 filters: Sharpen 1 and Sharpen 2 (OnDemand software). Two dentomaxillofacial radiologists examined the original and filtered images individually. Intra- and interobserver concordance was measured by using generalized estimating equations. The observers evaluated the subjective image quality and the visibility of 3 components of the TMJ: disk, condyle, and articular eminence. The images were ranked on a 4-point scale, from poor to excellent. The image quality of all filtered images was compared by using the χ2 test and Bonferroni correction for multiple comparisons. RESULTS: Intra- and interobserver concordance was good. The images filtered with Sharpen 1 and Sharpen 2 provided better definition of the structures compared with nonfiltered images, providing the highest scores for subjective image quality for all structures (P < .0001). CONCLUSIONS: The use of enhancement filters led to improved subjective quality and may improve the diagnostic efficacy of MRI in TMJ evaluation.

3D Reconstruction and Prediction of Sialolith Surgery.

Imaging examinations play an important role in the diagnosis of sialolithiasis, whose symptoms are initially confounded with other diseases. The objective of the present case report is to highlight imaging and processing techniques as well as image analysis for the preoperative assessment and planning of surgical interventions and adequate treatment of massive sialoliths. A 35-year-old male patient presented complaining of pain in the submandibular region and purulent secretions from a lingual caruncle with slightly increased volume in the region. Imaging examinations were ordered as follows: cone beam computed tomography, ultrasonography, and three-dimensional reconstruction, including clinical evaluation. A final diagnosis of sialolithiasis was established. Surgery was indicated and carried out by using a lateral transcervical approach for complete resection of the gland, which was based on the calculation of the total volume of the sialolith, thus increasing the surgery's success.

Investigation on the relationship of dimensions of the maxillary sinus drainage system with the presence of sinusopathies: a cone beam computed tomography study.

OBJECTIVE: This study sought to assess the relationship between the dimensions of the maxillary sinus drainage system with the content of sinuses. DESIGN: Three-hundred cone beam computed tomography images were selected from a database (105 males and 195 females). The images were assessed by a single investigator, trained and calibrated, performing image analysis. The length of the infundibulum and the ostium height in both maxillary sinuses were measured. The data were analyzed using Minitab 16, using 5% as a critical p-value. RESULTS: A significant gender difference was also found for presence in the normal content of sinus for females and presence of antral pseudocyst for males (p < 0.05). Subjects with normal content in the maxillary sinus present lower ostium height values. There were statistically significant with presence of and higher ostium height values and antral pseudocyst (p < 0.01). CONCLUSION: The current study results demonstrated that some sinusopathies were significantly related to dimensions of maxillary sinus drainage.

Comparison of accuracy between dental and skeletal age in the estimation of chronological age of Down syndrome individuals.

This study aimed to evaluate the accuracy of dental age (DA) and skeletal age (SA) methods in order to estimate chronological age (CA) in individuals with Down syndrome (DS), contributing to the Forensic Dentistry and making the identification of these individuals age possible. For this, 278 images of individuals were selected and divided in 2 groups: 216 non-DS patients and 62 with DS. At first, DA was evaluated by Nolla method, on panoramic radiographs, followed by SA, evaluated by Greulich and Pyle method. The linear correlation coefficient of Pearson was used for the analysis of concordance between the methods. Paired t-test with confidence interval was used to evaluate the accuracy and Bland and Altman method was applied to estimate limits of concordance. Complementary to this first analysis, descriptive statistics and ANOVA test were applied for comparison among chronological age (CA), dental age (DA) and skeletal age (SA), with a significance level of 95% (p≥0.05), ordering to observe the differences among them. DA, estimated by Nolla, is underestimated in both, DS and non-DS individuals, and it is more notable in DS individuals. SA estimated by Greulich and Pyle method is overestimated, except for non-DS males. The range of variance is greater in SA and DS than DA and non-DS individuals, respectively. A greater accordance was found for DA×CA if compared to SA×CA, indicating that DA, estimated by Nolla method, is more accurate than SA, evaluated by Greulich and Pyle method, for estimating CA of both, DS and non-DS individuals. However, neither method seems to be precise and more caution is required for age estimation in DS individuals.