Design and characterization of an organogel system containing ascorbic acid microparticles produced with propolis by-product.

This study aimed to prepare and characterize organogels containing microparticles of ascorbic acid (AA) obtained from propolis by-product. The formulations F1 (5% of microparticles) and F2 (10% of microparticles) were evaluated regarding rheological and textural properties, antioxidant and radical scavenging activity, in vitro release and cellular studies. The organogels showed plastic flow behavior and rheopexy. The textural parameters were within acceptable values for semisolid formulations. The antioxidant capacity of organogels F1 and F2 by the DPPH assay demonstrated IC50 ranging from 1523.59 to 1166.97 µg/mL, respectively. For the FRAP assay, the values found were 842.88 and 956.14 µmol of FSE/g formulation, respectively. Good scavenging activity against nitrogen species was observed. The concentration of 63 µg/mL did not present toxicity on HaCaT and HFF-1 cells. In vitro release profile of AA from organogels showed a slow pattern of drug release, mainly for F2. Therefore, the proposed organogel containing AA microparticles with propolis by-product matrix represents a promising platform for topical drug delivery with antioxidant effect.

Correction: Development of a microparticulate system containing Brazilian propolis by-product and gelatine for ascorbic acid delivery: evaluation of intestinal cell viability and radical scavenging activity.

Correction for 'Development of a microparticulate system containing Brazilian propolis by-product and gelatine for ascorbic acid delivery: evaluation of intestinal cell viability and radical scavenging activity' by Lizziane Maria Belloto de Francisco et al., Food Funct., 2018, DOI: 10.1039/c8fo00863a.

Development of a microparticulate system containing Brazilian propolis by-product and gelatine for ascorbic acid delivery: evaluation of intestinal cell viability and radical scavenging activity.

The use of propolis by-product (PBP) microparticles (MP) as delivery systems can be a promising tool to surpass drawbacks related to low stability of ascorbic acid (AA). The objective of this study was to develop and characterize MP prepared with PBP containing AA. The MP was characterized regarding morphology, particle size, polydispersity index (PDI), association efficiency (AE), drug loading (DL), infrared and Raman spectroscopy as well as antioxidant and radical scavenging activity, in vitro release, and cellular studies. MP was shown to be spherical with some agglomeration. Its particle size was 1654 ± 0.210 nm with a PDI of 0.7. The AE and DL were, respectively, 100.30 ± 2.66% and 13.16 ± 0.59. Spectroscopic studies indicated a possible interaction between the PBP and AA. 2,2-Diphenyl-1-picrylhydrazyl (DPPH˙), 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and ferric reducing antioxidant power (FRAP) assays demonstrated that the MP containing AA have an excellent antioxidant capacity as well as a considerable scavenging activity against reactive oxygen and nitrogen species. The in vitro release profile showed a slow pattern of drug release of AA from MP. Viability studies with intestinal cells revealed that MP did not present toxicity in Caco-2 and HT29-MTX. Moreover, AA could permeate Caco-2 monolayers and triple co-culture substantially at the end of 8 h, opposite to the MP. Therefore, the proposed MP formulation represents a promising platform for oral delivery of AA with a local effect on intestines.

Biomedical Platform Development of a Chlorophyll-Based Extract for Topic Photodynamic Therapy: Mechanical and Spectroscopic Properties.

Photodynamic therapy (PDT) is a therapeutic modality that has shown effectiveness in the inactivation of cancer cell lines and microorganisms. Treatment consists of activating the photosensitizer (PS) upon light irradiation of adequate wavelength. After reaching the excited state, the PS can handle the intersystem conversion through energy transfer to the molecular oxygen, generating reactive oxygen species. This especially applies to singlet oxygen (1O2), which is responsible for the selective destruction of the sick tissue. Photosensitizing compounds (chlorophylls and derivatives) existing in the spinach extract have applicability for PDT. This study aimed to develop and characterize the thermoresponsive bioadhesive system composed of Pluronic F127 20.0%- and Carbopol 934P 0.2% (w/w) (FC)-containing chlorophyll-based extract 0.5% (w/w) (FC-Chl). Mechanical and rheological properties, in vitro release, sol-gel transition temperature, and ex vivo permeability of the spinach extract PS components (through pig ear skin) were investigated. Furthermore, photodynamic activity of the system was accessed through uric acid and time-solved measurements. The sol-gel transition temperature obtained for the FC-Chl system was 28.8 ± 0.3 °C. Rheological and texture properties of the platform were suitable for use as a dermatological system, exhibiting easy application and good characteristics of retention in the place of administration. In vitro release studies showed the presence of two distinct mechanisms that reasonably obey the zero-order and first-order kinetics models. PS components presented skin permeability and reached a permeation depth of 830 µm (between the epidermis and dermis). The photodynamic evaluation of the FC-Chl system was effective in the degradation of uric acid. The quantum yield (ΦΔ1O2) and life time (τ1O2) of singlet oxygen showed similar values for the spinach extract and the isolated chlorophyll a species in ethanol. These results allowed for the classification of the FC-Chl platform as potentially useful for the delivery of the chlorophyll-based extract in the topic PDT, suggesting that it is worthy for in vivo evaluation.

Evaluation of radical scavenging activity, intestinal cell viability and antifungal activity of Brazilian propolis by-product.

Propolis is a natural adhesive resinous compound produced by honeybees to protect hives from bacteria and fungi, being extremely expensive for food industry. During propolis production, a resinous by-product is formed. This resinous waste is currently undervalued and underexploited. Accordingly, in this study the proximate physical and chemical quality, as well as the antioxidant activity, radical scavenging activity and cell viability of this by-product were evaluated and compared with propolis in order to boost new applications in food and pharmaceutical industries. The results revealed that the by-product meets the physical and chemical quality standards expected and showed that the propolis waste contains similar amounts of total phenolic content (TPC) and total flavonoid content (TFC) to propolis. Also, a good scavenging activity against reactive oxygen and nitrogen species (ROS and RNS, respectively) determined by the assays of superoxide anion radical (O2-), hydrogen peroxide (H2O2), hypochlorous acid (HOCl), nitric oxide (NO) and peroxyl radical (ROO) were determined. Linear positive correlations were established between the TPC of both samples and the antioxidant activity evaluated by three different methods (DPPH, ABTS and FRAP assays). The extracts were also screened for cell viability assays in two different intestinal cell lines (HT29-MTX and Caco-2), showing a viability concentration-dependent. Similarly, the Artemia salina assay, used to assess toxicity, demonstrated the concentration influence on results. Finally, the antifungal activity against ATCC species of Candida was demonstrated. These results suggest that propolis by-product can be used as a new rich source of bioactive compounds for different areas, such as food or pharmaceutical.

Nanoparticles of Waste Material of Propolis and Gelatin as a Novel System for Delivery of L-Ascorbic Acid.

BACKGROUND: The waste material from the preparation of propolis extracts is a potential natural compound for application in pharmaceutical and medicine nanostructured products. Ascorbic acid is an excellent antioxidant and an important cofactor of several physiological and biochemical processes. OBJECTIVE: The aim of this study was to develop and characterize nanoparticles containing L-ascorbic acid prepared with propolis byproduct. METHOD: Nanoparticle's physicochemical characteristics (surface morphology, particle size, zeta potential, and entrapment efficiency), antioxidant activity, in vitro release profile, and in vitro cytotoxicity were evaluated. RESULTS: Nanoparticles showed to be spherical, with agglomeration, mean diameter between 110.93 and 480.59 nm, zeta potential near zero and good entrapment efficiency. Antioxidant activity of L-ascorbic acid increased when nanoencapsulated and the drug release was prolonged, controlled mainly by the phenomenon of relaxation of polymer chains and dependent of propolis residue concentration. The application of technology provided a reduction in the level of cytotoxicity of L-ascorbic acid, and the nanoparticles showed a protective effect on macrophages.

Formulation and Evaluation of a Mucoadhesive Thermoresponsive System Containing Brazilian Green Propolis for the Treatment of Lesions Caused by Herpes Simplex Type I.

The aim of the present work was to develop a topical delivery system that contains Brazilian green propolis extract (PE-8) to increase efficiency and convenience when applied to herpetic lesions. The cytotoxicity and antiherpetic activity was determined in vitro and in vivo. The PE-8 was added to a system that contained poloxamer 407 and carbopol 934P. The in vitro characterization of the system included rheological studies, texture profile analysis, and mucoadhesion analysis. The PE-8 inhibited the virus during the phase of viral infection, induced virion damage, and exhibited an ability to protect cells from viral infection. The system had advantageous mucoadhesive properties, including a suitable gelation temperature of approximately 25°C for topical delivery, a desirable textural profile, and pseudoplastic behavior. The in vitro release study showed a rapid initial release of the PE-8 in the first 3 h, and the rate of drug release remained constant for up to 24 h. The system appeared to be macroscopically and microscopically innocuous to skin tissue. Therefore, the mucoadhesive thermoresponsive system that contained the PE-8 appears to be promising for increasing bioavailability and achieving prolonged release of the PE-8 when applied to skin lesions caused by herpes simplex virus type 1.

The Use of Propolis in Micro/Nanostructured Pharmaceutical Formulations.

BACKGROUND: Propolis is a resinous material with complex chemical structure, produced by bees using plant sources, displaying a wide spectrum of biological activities. METHODS: Many studies have reported the use of this compound in pharmaceutical, medicinal, veterinary and dentistry areas, and the results have reported its pharmacological activities. RESULTS: Moreover, many propolis delivery systems have been proposed and evaluated, indicating that they can be used. On the other hand, considering its chemical and physical characteristics, propolis could be used as a material to produce micro/nano-structured pharmaceutical formulations. CONCLUSION: This work reviews the recent studies of development of micro/nanostructured systems using propolis or its byproduct. In addition, patents were reviewed and categorized.

A high performance liquid chromatography with ultraviolet method for Eschweilera nana leaves and their anti-inflammatory and antioxidant activities.

BACKGROUND: Eschweilera nana Miers is a tree widely distributed in Cerrado, Brazil. OBJECTIVE: In this study, we aimed to describe its phytochemical properties and antioxidant and topical anti-inflammatory effects for the first time, as well validate an high performance liquid chromatography with ultraviolet/visible (HPLC-UV-Vis) method for the separation and quantification of the main components (hyperoside and rutin) in the hydroalcoholic extract of E. nana leaves. MATERIALS AND METHODS: Structural identification of compounds in E. nana extract was performed by analysis of spectral data by (1)H nuclear magnetic resonance, (13)C nuclear magnetic resonance and/or ESI/EM. The HPLC-UV-Vis method was validated according International Conference on Harmonization (ICH) parameters. The 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) method were used for determination of in vitro antioxidant activities and the croton oil-induced inflammation for evaluation of in vivo anti-inflammatory effects. RESULTS: Hyperoside, rutin, α-amirin, ß-amirin, ß-sitosterol, and stigmasterol were identified in the hydroalcoholic extract of E. nana leaves. HPLC-UV-Vis was validated according to ICH parameters. Furthermore, in vitro and in vivo assays demonstrated that the hydroalcoholic extract and methanol fraction showed significant antioxidant and topical anti-inflammatory effects, as they were able to reduce ear edema induced by croton-oil application. CONCLUSIONS: This research showed the first phytochemical study of E. nana extract and their biological activities may be associated with the presence of flavonoids in the extracts.

An overview of recent patents on composition of mucoadhesive drug delivery systems.

Mucoadhesion began to be applied to therapeutic systems with the aim of the incorporation of bioadhesive molecules into pharmaceutical dosage forms intended to keep in close contact with the tissue, releasing the drug near the action site, thereby increasing its bioavailability and promoting local or systemic effects. Different mucoadhesive materials and dosage forms have been studied, since the properties of mucoadhesion largely depend on the features of the material used in its preparation. This mini-review focuses on mucoadhesive therapeutic systems, the main mucosal routes of administration, and materials used to prepare the systems over the last five years. Patents and applications were reviewed, categorized and the materials were described together with the proposed systems.

Development and characterization of gelatin and ethylcellulose microparticles designed as platforms to delivery fluoride.

PURPOSE: To develop and characterize microparticles containing fluoride sources (FS) from sodium fluoride, sodium monofluorophosphate (MFP) or aminofluoride and evaluate their characteristics as fluoride delivery systems. METHODS: Ethylcellulose microparticles containing fluoride (EM) were prepared by emulsification of ethyl acetate dispersion containing polymer and FS (ethylcellulose:FS ratio of 1:0.25 wt/wt) with aqueous external phase containing polysorbate 80 (0.8% vol/vol) using the volume ratio (organic:aqueous) of 1:5. The organic solvent was evaporated; microparticles were collected by centrifuging, washed with deionized water and freeze-dried. Gelatin microparticles containing FS (GM) was obtained by dispersion of the natural polymer in water, adding FS (6:1 wt/wt) and 20% (wt/wt) of mannitol. The final dispersions were spray-dried. Particle morphology and size were investigated using optical microscopy. The content of fluoride ions in the microparticles was quantified using a potentiometric method. The encapsulation efficiency and in vitro release profile of fluoride was also determined. RESULTS: Microparticles exhibited polydispersity and mean diameters <145.35 and <124.22 µm for EM and GM, respectively. Considering the entrapment efficiency, the spray-drying technique exhibited greater values than microencapsulation by emulsification and solvent evaporation. The release profile of fluoride ions from microparticles was shown to be modified, fitted first order and guided by Fickian diffusion. CONCLUSIONS: Microparticles prepared with ethylcellulose or gelatin can be used as platform for oral delivery of fluoride, providing a means to increase the local supply of this ion in a controlled manner, providing an increased protection against caries. Moreover, further investigations are needed to demonstrate this property in vivo.