Development of Surface-Coated Polylactic Acid/Polyhydroxyalkanoate (PLA/PHA) Nanocomposites.

This work reports on the design and development of nanocomposites based on a polymeric matrix containing biodegradable Polylactic Acid (PLA) and Polyhydroxyalkanoate (PHA) coated with either Graphite NanoPlatelets (GNP) or silver nanoparticles (AgNP). Nanocomposites were obtained by mechanical mixing under mild conditions and low load contents (<0.10 wt %). This favours physical adhesion of the additives onto the polymer surface, while the polymeric bulk matrix remains unaffected. Nanocomposite characterisation was performed via optical and focused ion beam microscopy, proving these nanocomposites are selectively modified only on the surface, leaving bulk polymer unaffected. Processability of these materials was proven by the fabrication of samples via injection moulding and mechanical characterisation. Nanocomposites showed enhanced Young modulus and yield strength, as well as better thermal properties when compared with the unmodified polymer. In the case of AgNP coated nanocomposites, the surface was found to be optically active, as observed in the increase of the resolution of Raman spectra, acquired at least 10 times, proving these nanocomposites are promising candidates as surface enhanced Raman spectroscopy (SERS) substrates.

Honeycomb Films with Core-Shell Dispersed Phases Prepared by the Combination of Breath Figures and Phase Separation Process of Ternary Blends.

Herein, we propose a strategy to fabricate core-shell microstructures ordered in hexagonal arrays by combining the breath figures approach and phase separation of immiscible ternary blends. This simple strategy to fabricate these structures involves only the solvent casting of a ternary polymer blend under moist atmosphere, which provides a facile and low-cost fabrication method to obtain the porous structures with a core-shell morphology. For this purpose, blends consisting of polystyrene (PS) as a major component and PS40-b-P(PEGMA300)48 amphiphilic copolymer and polydimethylsiloxane (PDMS) as minor components were dissolved in tetrahydrofuran and cast onto glass wafers under humid conditions, 70% of relative humidity. The resulting porous morphologies were characterized by optical and confocal Raman microscopy. In particular, confocal Raman results demonstrated the formation of core-shell morphologies into the ordered pores, in which the PS forms the continuous matrix, whereas the other two phases are located into the cavities (PDMS is the core while the amphiphilic copolymer is the shell). Besides, by controlling the weight ratio of the polymer blends, the structural parameters of the porous structure such as pore diameter and the size of the core can be effectively tuned.

Immobilization of Stimuli-Responsive Nanogels onto Honeycomb Porous Surfaces and Controlled Release of Proteins.

In this article, we describe the formation of functional honeycomb-like porous surfaces fabricated by the breath figures technique using blends of either amino-terminated poly(styrene) or a poly(styrene)-b-poly(acrylic acid) block copolymer with homopoly(styrene). Thus, the porous interfaces exhibited either amino or acid groups selectively located inside of the holes, which were subsequently employed to anchor stimuli-responsive nanogels by electrostatic interactions. These nanogels were prepared from poly(N-isopropylacrylamide) (PNIPAM) cross-linked with dendritic polyglycerol (dPG) and semi-interpenetrated with either 2-(dimethylamino)ethyl methacrylate (DMAEMA) or 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) to produce positively and negatively charged nanogel surfaces, respectively. The immobilization of these semi-interpenetrated networks onto the surfaces allowed us to have unique stimuli-responsive surfaces with both controlled topography and composition. More interestingly, the surfaces exhibited stimuli-responsive behavior by variations on the pH or temperature. Finally, the surfaces were evaluated regarding their capacity to induce a thermally triggered protein release at temperatures above the cloud point temperature (T(cp)) of the nanogels.

Enzymatic Catalysis Combining the Breath Figures and Layer-by-Layer Techniques: Toward the Design of Microreactors.

Herein, we report the fabrication of microstructured porous surfaces with controlled enzymatic activity by combining the breath figures and the layer-by-layer techniques. Two different types of porous surfaces were designed based on fluorinated and carboxylated copolymers in combination with PS, using poly(2,3,4,5,6-pentafluorostyrene)-b-polystyrene (PS5F31-b-PS21) and polystyrene-b-poly(acrylic acid) (PS19-b-PAA10) block copolymers, respectively. For comparative purposes, flat surfaces having similar chemistry were obtained by spin-coating. Poly(sodium 4-styrenesulfonate)/poly(allylamine hydrochloride) (PSS/PAH) multilayers incorporating alkaline phosphatase (ALP) were built on these porous surfaces to localize the enzyme both inside and outside of the pores using PS/PS5F31-b-PS21 surfaces and only inside the pores on PS/PS19-b-PAA10 surfaces. A higher catalytic activity of ALP (about three times) was obtained with porous surfaces compared to the flat ones. The catalysis happens specifically inside the holes of PS/PS19-b-PAA10surfaces, where ALP is located. This opens the route for applications in microreactors.

Dendritic amphiphiles as additives for honeycomb-like patterned surfaces by breath figures: role of the molecular characteristics on the pore morphology.

The current study presents a library of honeycomb-like patterned surfaces developed from a variety of different water-soluble amphiphilic dendrons. When compared to commercial surfactants, the dendrons produce a wide variety of porous surfaces due to their well-defined branched structure. Different functionalities and generations of dendrons have been studied. A singular hierarchical distribution of the dendrons, forming small nanoparticles (micelles) only at the inner edges of the holes (coffee stain effect) is observed. Once the surfaces are fabricated, these dendrons can be easily recovered via simple aqueous washing. After this treatment, the surfaces exhibit a high hydrophobic character (up to 140°) due to the high porosity. This behavior can be described by the Cassie-Baxter model.