Influence of intensity ultrasound on rheological properties and bioactive compounds of araticum (Annona crassiflora) juice.

The use of extracts rich in bioactive compounds is becoming increasingly common in the food, cosmetics, and pharmaceutical industries for the production of functional products. Araticum is a potential fruit to be analyzed due to its content of phenolic compounds, carotenoids and vitamins, with antioxidant properties. Therefore, this study aimed to investigate the effect of ultrasound on total phenolic compounds, total carotenoids, ascorbic acid, color, turbidity and rheology in araticum juice. Response surface methodology based on a central composite design was applied. Araticum juice was subjected to sonication at amplitude levels ranging from 20 to 100 % of the total power (400 W) at a constant frequency of 20 kHz for different durations (2 to 10 min). Morphological analysis was conducted to observe microscopic particles, and viscosity and suitability to rheological models (Newtonian, Power Law, and Herschel-Bulkley) were assessed. The ultrasonic probe extraction method was compared to the control juice. According to the responses, using the desirability function, the optimal conditions for extraction were determined to be low power (low amplitude) applied in a short period of time or low power applied in a prolonged time. These conditions allowed an ultrasonic probe to act on releasing bioactive compounds without degrading them. All three rheological models were suitable, with the Power Law model being the most appropriate, exhibiting non-Newtonian pseudoplastic behavior.

Microstructured lipid microparticles containing anthocyanins: Production, characterization, storage, and resistance to the gastrointestinal tract.

Anthocyanins from grape peel extract have several biological properties and can act as a natural colorant and antioxidant agent. However, these compounds are susceptible to degradation by light, oxygen, temperature, and the gastrointestinal tract. Thus, this study produced microstructured lipid microparticles (MLMs) containing anthocyanins by the spray chilling technique and evaluated the particle stability. trans-free fully hydrogenated palm oil (FHPO) and palm oil (PO) were used as encapsulating materials in the ratios 90:10, 80:20, 70:30, 60:40, and 50:50, respectively. The concentration of grape peel extract was 40 % (w/w) in relation to the encapsulating materials. The microparticles were evaluated for thermal behavior by DSC, polymorphism, FTIR, size distribution and particle diameter, bulk density, tapped density, flow properties, morphology, phenolic compounds content, antioxidant capacity, and retention of anthocyanins. Furthermore, the storage stability of the microparticles was investigated at different temperatures (-18, 4, and 25 °C), and the anthocyanins retention capacity, kinetic parameters (half-life time and degradation constant rate), total color difference, and visual aspects were evaluated during 90 days of storage. The resistance of MLMs to the gastrointestinal tract was also evaluated. In general, higher FHPO concentrations increased the thermal resistance of the MLMs and both showed defined peaks of ß' and ß forms. The FTIR analysis showed that the MLMs preserved the original forms of their constituent materials even after atomization, with interactions between them. The increase in the PO concentration directly affected the increased mean particle diameter, agglomeration, and cohesiveness, as well as lower bulk density, tapped density, and flowability. The retention of anthocyanins in MLMs ranged from 81.5 to 61.3 % and was influenced by the particle size, with a better result observed for the treatment MLM_90:10. The same behavior was observed for the phenolic compounds content (1443.1-1247.2 mg GAE/100 g) and antioxidant capacity (1739.8-1660.6 mg TEAC/100 g). During the storage, MLMs made with FHPO to PO ratios of 80:20, 70:30, and 60:40 showed the highest stability for anthocyanin retention and color changes at the three temperatures (- 18 °C, 4 °C, and 25 °C). The gastrointestinal simulation in vitro revealed that all treatments were resistant to gastric phase and maintained a maximum and controlled release in the intestinal phase, demonstrating that FHPO together with PO are effective to protect anthocyanins during gastric digestion, and can improve the bioavailability of this compound in the human organism. Thus, the spray chilling technique may be a promising alternative for the production of anthocyanins-loaded microstructured lipid microparticles with functional properties for various technological applications.

Effect of the incorporation of lignin microparticles on the properties of the thermoplastic starch/pectin blend obtained by extrusion.

The present study aimed to produce thermoplastic starch films with different concentrations of thermoplastic pectin and the addition of 4% lignin microparticles as a reinforcing and active agent. The pectin improved the modulus of elasticity, and decreased the elongation at break. In addition, it improved the UV light protection to 100% at 320 nm and 95.9% at 400 nm. The incorporation of lignin microparticles improved the thermal stability of the blends made with 25% and 50% thermoplastic pectin when compared to the pectin-free blends. The blend with 25% thermoplastic pectin led to an increase of 75.8% and 34% in elongation at break and deformation of the films, respectively. This blend also improved the UV light protection to 100% due to its dark brown color. Regarding the permeability properties, the films with 25% and 50% thermoplastic pectin showed lower oxygen permeability (48% and 65%) and an increase in the antioxidant activities from 2.7% to 71.08% and 4.1% to 79.28%, respectively. Thus, the polymer blend with 25% thermoplastic pectin with the incorporation of lignin microparticles proved to be a good alternative for use in foods sensitive to the effects of oxygen and UV light.

Prebiotic Carbohydrates: Effect on Reconstitution, Storage, Release, and Antioxidant Properties of Lime Essential Oil Microparticles.

The aim of this study was to include prebiotic biopolymers as wall material in microparticles of lime essential oil. Whey protein isolate (WPI), inulin (IN), and oligofructose (OL) biopolymers were used in the following combinations: WPI, WPI/IN (4:1), and WPI/OL (4:1). The emulsion droplets in the presence of inulin and oligofructose showed larger sizes on reconstitution. There was no significant difference in solubility of the particles, but the wettability was improved on addition of the polysaccharides. The size of the oligofructose chains favored the adsorption of water. Prebiotic biopolymers reduced thermal and chemical stability of the encapsulated oil. Microparticles produced with WPI showed a higher bioactive compound release rate, mainly due to its structural properties, that enabled rapid diffusion of oil through the pores. The use of prebiotic biopolymers can be a good option to add value to encapsulated products, thus promoting health benefits.