ABSTRACT
The aim of this study was to evaluate the transdentinal cytotoxicity of experimental adhesive systems (EASs) with different hydrophilicity and dentin saturation solutions on odontoblast-like cells. One hundred 0.4-mm-thick dentin discs were mounted in in vitro pulp chambers and assigned to 10 groups. MDPC-23 cells were seeded onto the pulpal side of the discs, incubated for 48h. The EASs with increasing hydrophilicity (R1, R2, R3 and R4) were applied to the occlusal side after etching and saturation of etched dentin with water or ethanol. R0 (no adhesive) served as controls. R1 is a non-solvated hydrophobic blend, R2 is similar to a simplified etch-and-rinse adhesive system and R3 and R4 are similar to self-etching adhesives. After 24h, cell metabolism was evaluated by MTT assay (n=8 discs) and cell morphology was examined by SEM (n=2 discs). Type of cell death was identified by flow cytometry and the degree of monomer conversion (%DC) was determined by infrared spectroscopy (FTIR) after 10s or 20s of photoactivation. Data were analyzed by the Kruskal-Wallis and Mann-Whitney tests (α=0.05). Dentin saturation with ethanol resulted in higher necrotic cell death ratios for R2, R3 and R4 compared with water saturation, although R2 and R3 induced higher SDH production. Photoactivation for 20s significantly improved the %DC of all EASs compared with 10s. A significant positive correlation was observed between the degree of hydrophilicity and %DC. In conclusion, except for R1, dentin saturation with ethanol increased the cytotoxicity of EASs, as expressed by the induction of necrotic cell death.
Subject(s)
Dentin-Bonding Agents/toxicity , Dentin/drug effects , Ethanol/pharmacology , Odontoblasts/drug effects , Solvents/pharmacology , Acid Etching, Dental/methods , Animals , Bisphenol A-Glycidyl Methacrylate/chemistry , Bisphenol A-Glycidyl Methacrylate/toxicity , Cell Culture Techniques , Cell Death/drug effects , Cell Line , Cell Shape/drug effects , Cell Survival/drug effects , Dental Bonding/methods , Dentin Permeability/drug effects , Dentin-Bonding Agents/chemistry , Humans , Hydrophobic and Hydrophilic Interactions , Light-Curing of Dental Adhesives , Methacrylates/chemistry , Methacrylates/toxicity , Mice , Necrosis , Organophosphates/chemistry , Organophosphates/toxicity , Polyethylene Glycols/chemistry , Polyethylene Glycols/toxicity , Polymerization , Polymethacrylic Acids/chemistry , Polymethacrylic Acids/toxicity , Water/chemistry , para-Aminobenzoates/chemistry , para-Aminobenzoates/toxicityABSTRACT
OBJECTIVE: The aim of this study was to compare water sorption (WS) and solubility (WSB) of different dentin bonding agents (DBA) as regards classification and light-activation system. The null hypotheses were: (1) there is no difference among DBA with respect to water sorption and solubility; (2) there is no effect of light-curing source on water sorption and solubility of DBA. METHODS: The tested materials were: three-step etch-and-rinse (ScotchBond multi-purpose and Heliobond-control groups), two-step etch-and-rinse (Excite, Adper Single Bond, Adper Single Bond 2), self-etching (Adhse) and all-in-one (Xeno III) systems. For each material, six specimens were prepared (0.8mmx5.5mm) for each light-activation device: halogen lamp (control) or light-emitting diodes (LED). They were transferred to desiccators until a constant mass was obtained (m(1)), subsequently immersed in deionized water until no alteration was obtained (m(2)). Following, the specimens were reconditioned to constant mass in desiccators (m(3)). The volume (V) of each specimen was calculated (mm(3)). WS and WSB were determined using the equations (m(2)-m(3)/V) and (m(3)-m(1)/V), respectively. Data were subjected to one-way analysis of variance and Tukey test (p<0.05). The influence of photo-activation units was analyzed by t-test. RESULTS: Higher values of WS and WSB were observed for the two-step etch-and-rinse and all-in-one systems. The employed light-activation unit also affected the tested characteristics. Thus, the anticipated null hypotheses were rejected. CONCLUSIONS: Simplified systems were more susceptible to water adverse and they may become more prone to degradation over time regardless of the type of light-activation source.
Subject(s)
Dentin-Bonding Agents/chemistry , Lighting/instrumentation , Absorption , Acrylates/chemistry , Acrylic Resins/chemistry , Adsorption , Bisphenol A-Glycidyl Methacrylate/chemistry , Dentin-Bonding Agents/radiation effects , Desiccation , Humans , Materials Testing , Methacrylates/chemistry , Resin Cements/chemistry , Solubility , Temperature , Time Factors , Water/chemistryABSTRACT
OBJECTIVES: This study evaluated the water sorption, solubility and kinetics of water diffusion in commercial and experimental resins that are formulated to be used as dentin and enamel bonding agents. METHODS: Four commercial adhesives were selected along with their solvent-monomer combination: the bonding resins were of Adper Scotchbond Multi-Purpose (MP) and Clearfil SE Bond (SE) systems, and the "one-bottle" systems, Adper Single Bond (SB) and Excite (EX). Five experimental methacrylate-based resins of known hydrophilicities (R1, R2, R3, R4 and R5) were used as reference materials. Specimen disks were prepared by dispensing the uncured resin into a mould (5.8mm x 0.8mm). After desiccation, the cured specimens were weighed and then stored in distilled water for evaluation of the water diffusion kinetics over a 28-day period. RESULTS: Resin composition and hydrophilicity (ranked by their Hoy's solubility parameters) influenced water sorption, solubility and water diffusion in both commercial and experimental dental resins. The most hydrophilic experimental resin, R5, showed the highest water sorption, solubility and water diffusion coefficient. Among the commercial adhesives, the solvated systems, SB and EX, showed water sorption, solubility and water diffusion coefficients significantly greater than those observed for the non-solvated systems, MP and SE (p<0.05). In general, the extent and rate of water sorption increased with the hydrophilicity of the resin blends. SIGNIFICANCE: The extensive amount of water sorption in the current hydrophilic dental resins is a cause of concern. This may affect the mechanical stability of these resins and favor the rapid and catastrophic degradation of resin-dentin bonds.
