The impact of non-deproteinization on physicochemical and biological properties of natural rubber latex for biomedical applications.

Latex is a colloidal suspension derived from the Hevea brasiliensis tree, derived from natural rubber, poly(isoprene), and assorted constituents including proteins and phospholipids. These constituents are inherent to both natural rubber and latex serum. This investigation was undertaken to examine the impact of the deproteinization process on chemical and biological dynamics of natural rubber latex. Natural Rubber (NR) extracted from the pure latex (LNCP) was obtained through centrifugation, followed by six rounds of solvent purification (LP6). The structure was characterized using Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), swelling test, surface zeta potential (ζ), scanning electron microscopy (SEM) and in vitro assay. The results revealed that the LP6 group presented decreased swelling kinetics, reduced cell adhesion and proliferation, and a smoother surface with decreased negative surface charge. Conversely, the LNCP group shown accelerated swelling, heightened adhesion and cellular growth, and a more negatively charged and rougher surface. As such, the attributes of latex serum and proteins have potential usage across numerous biomedical applications.

Synthesis of epoxidized natural rubber grafted with hyaluronic acid for the development of biomaterials.

Natural Rubber (NR), extracted from Hevea brasiliensis rubber trees, is a biocompatible biopolymer with properties that support in the tissue repair process. However, its biomedical applications are limited due to the presence of allergenic proteins, hydrophobicity, and unsaturated bonds. To overcome these limitations and contribute to the development of new biomaterials, this study aims to deproteinize, epoxidize, and subject NR to copolymerization by grafting with hyaluronic acid (HA), which is widely recognized for its bioactive properties in the medical field. The deproteinization, epoxidation, and graft copolymerization through the esterification reaction were confirmed by Fourier Transform Infrared Spectroscopy and Hydrogen Nuclear Magnetic Resonance Spectroscopy analysis. Thermogravimetry and Differential Scanning Calorimetry demonstrated that the grafted sample exhibited a lower degradation rate and a higher glass transition temperature, indicating strong intermolecular interactions. Moreover, contact angle measurement revealed that the grafted NR exhibited a high hydrophilic character. The results obtained suggest the formation of a novel material with great potential for application in biomaterials involved in tissue repair processes.

Sciatic nerve repair using poly(ε-caprolactone) tubular prosthesis associated with nanoparticles of carbon and graphene.

INTRODUCTION: Injuries to peripheral nerves generate disconnection between spinal neurons and the target organ. Due to retraction of the nerve stumps, end-to-end neurorrhaphy is usually unfeasible. In such cases, autologous grafts are widely used, nonetheless with some disadvantages, such as mismatching of donor nerve dimensions and formation of painful neuromas at the donor area. Tubulization, using bioresorbable polymers, can potentially replace nerve grafting, although improvements are still necessary. Among promising bioresorbable synthetic polymers, poly(l-lactic acid) (PLLA) and poly(ε-caprolactone) (PCL) are the most studied. Carbon nanotubes and graphene sheets have been proposed, however, as adjuvants to improve mechanical and regenerative properties of tubular prostheses. Thus, the present work evaluated nerve tubulization repair following association of PCL with nanoparticles of carbon (NPC) and graphene (NPG). METHODS: For that, adult Lewis rats were subjected to unilateral sciatic nerve tubulization and allowed to survive for up to 8 and 12 weeks postsurgery. RESULTS: Nanocomposites mechanical/chemical evaluation showed that nanoparticles do not alter PCL crystallinity, yet providing reinforcement of polymer matrix. Thus, there was a decrease in the enthalpy of melting when the mixture of PCL + NPC + NPG was used. Nanocomposites displayed positive changes in molecular mobility in the amorphous phase of the polymer. Also, the loss modulus (E") and the glass transition exhibited highest values for PCL + NPC + NPG. Scanning electron microscopy analysis revealed that PCL + NPC + NPG prostheses showed improved cell adhesion as compared to PCL alone. Surgical procedures with PCL + NPC + NPG were facilitated due to improved flexibility of the prosthesis, resulting in better stump positioning accuracy. In turn, a twofold increased number of myelinated axons was found in such repaired nerves. Consistent with that, target muscle atrophy protection has been observed. CONCLUSION: Overall, the present data show that nanocomposite PCL tubes facilitate nerve repair and result in a better regenerative outcome, what may, in turn, represent a new alternative to pure PCL or PLLA prostheses.

Histologic and Histometric Analysis of Bone Repair at the Site of Mandibular Body Osteotomy and at the Bone-Screw Interface After Using a Biodegradable 2.0-mm Internal Fixation System.

The aim of the study was to evaluate histologically and histometrically the bone repair at the mandibular body osteotomy and at the bone-screw interface after using a biodegradable 2.0-mm internal fixation system. Six dogs were subjected to an osteotomy in the mandibular body, which was stabilized by applying a fixation device manufactured with poly-L-DL-lactic acid (70:30). The dogs were euthanized at 2 and 18 weeks. Each screw was sectioned along its long axis, and the osteotomy sites were divided into 3 parts: the upper part was labeled the tension third (TT); the lower part, compression third (CT); and the part between the TT and CT, intermediary third (IT). Histologic analysis showed areas of direct contact between the screw surface and the parent lamellar bone at 2 weeks. At 18 weeks, 3 microscopically distinct layers at the bone-screw interface were noted. At the osteotomy sites, union between the bone fragments was observed at 18 weeks. Statistically significant differences in the newly formed bone among TT, IT, and CT (P = 0.019) were observed. In conclusion, the biomechanical environment created by the biodegradable IF system used in this study facilitated bone repair at the osteotomy site.

Treatment of peri-implantitis using nonsurgical debridement with bioresorbable nanospheres for controlled release of doxycycline: case report.

Peri-implantitis treatment is often surgical; however, in this case report, an alternative approach has been documented using a combination of nonsurgical debridement with the local controlled release of doxycycline by bioresorbable nanospheres in the peri-implant defect. After 15 months, remission on clinical inflammatory parameters of bleeding and suppuration on probing, as well as reduction of probing depths, was observed. This alternative approach may enhance clinical parameter improvements in some cases of peri-implantitis without the need for a surgical approach for implant decontamination.

BIORESORBABLE POLYMERIC MENISCAL PROSTHESIS: STUDY IN RABBITS.

OBJECTIVE: To induce growth of a neomeniscus into the pores of a prosthesis in order to protect the knee joint cartilage. METHODS: 70 knees of 35 New Zealand rabbits were operated. The rabbits were five to seven months old, weighed 2 to 3.8 kilograms, and 22 were male and 13 were female. Each animal underwent medial meniscectomy in both knees during a single operation. A bioabsorbable polymeric meniscal prosthesis composed of 70% polydioxanone and 30% L-lactic acid polymer was implanted in one side. The animals were sacrificed after different postoperative time intervals. The femoral condyles and neomeniscus were subjected to histological analysis. Histograms were used to measure the degradation and absorption of the prosthesis, the growth of meniscal tissue in the prosthesis and the degree of degradation of the femoral condyle joint cartilage. RESULTS: The data obtained showed that tissue growth histologically resembling a normal meniscus occurred, with gradual absorption of the prosthesis, and the percentages of chondrocytes on the control side and prosthesis side. CONCLUSION: Tissue growth into the prosthesis pores that histologically resembled the normal rabbit meniscus was observed. The joint cartilage of the femoral condyles on the prosthesis side presented greater numbers of chondrocytes in all its layers.

Bioreabsorbable polymer scaffold as temporary meniscal prosthesis.

Menisci have an important role in load bearing, shock absorption, knee joint stability, and joint lubrication. Meniscal lesions and meniscectomy are followed by osteoarthritis in a high percentage of patients. At present, there is no ideal prosthesis for meniscal substitution. In this work, a bioreabsorbable polymer scaffold made of poly(L-lactic acid) (PLLA) and poly(p-dioxanone) (PPD) blend was developed to be used as a temporary meniscal prosthesis to stimulate the formation of an in situ meniscal replication while the scaffold is reabsorbed by the organism. Total meniscectomy of medial meniscus and arthrotomy was made in both back knees of 34 adult New Zealand white rabbits by medial parapatellar incision. The scaffolds were sutured in one of the knees, and other was used as a control. A meniscal replica was developed, suggesting that this material has great potential to be used as a meniscal prosthesis, especially because the new meniscus promoted a significant protection of cartilage, and cartilage degeneration in the control condyles was observed.