Use of Nile tilapia (Oreocromis niloticus) processing residues in the production of pâtés with the addition of oregano (Origanum vulgare) essential oil.

The effect of the use of Nilo tilapia filleting residues in the production of pâtés with the addition of oregano essential oil stored for 90 days at 4 °C was evaluated. For that, 5 treatments were performed as follows: TSA-control treatment; TES with the addition of sodium erythorbate; and formulation TOE1 with 600 ppm oregano essential oil; TOE2 with 1000 ppm essential oil; and TOE3 with 1400 ppm essential oil. The pâtés showed adequate technological and physicochemical characteristics and microbiological counts within the legislation standards. No significant differences were observed in the luminosity of the pâté formulations during storage, and the addition of oil contributed to the increase in a* values and stability of b* values. Regarding the lipid and protein oxidation, TOE3 showed lower values at the end of the shelf-life. The addition of essential oil did not affect the hardness and cohesiveness of the products. The fatty acids in greater amounts in the samples were linoleic, oleic, palmitic, and stearic acids. The analysis of biogenic amines indicated that only the treatments with the highest amounts of sodium erythorbate (TES and TOE1) showed losses of spermidine. It was observed that decreasing the inclusion of sodium erythorbate and increasing the inclusion of oregano essential oil resulted in a drop in cadaverine values. A total of 46 volatile compounds were detected in the samples with the highest amount of free fatty acids and all the formulations were well accepted sensorially.

Flavored Amazonic pirarucu (Arapaima giga) waste flour (salted and sweet) for inclusion in food products.

This study aimed to develop flavored flours (salty and sweet) from Amazonic pirarucu waste (Arapaima gigas), include them in extruded snacks, and evaluate the nutritional, physicochemical, microbiological, and acceptance characteristics of these products. A standard flour was elaborated with pirarucu carcass, which presented 54.42% of protein and 7.24% of lipids, and from this, flavored flours were elaborated (salty and sweet). The standard flour had higher levels of protein, calcium, and phosphorus; and the salted one had higher levels of lipids. The fatty acids present in greater quantities were oleic (average of 32.21%), linolenic (average of 20.74%), and palmitic (average of 17.81%). The flavored flours were better accepted than the standard flour, for all sensory attributes and purchase intention. The snacks with sweet flour, despite better results in the sensory attributes of color, aroma, and flavor, were the ones that presented the lowest content of protein and ash, when compared to those with inclusion of standard flour. It is concluded that the pirarucu waste can be used for producing flavored flours and extruded snacks, with the purpose of improved food products.

Pantanal yacare (Caiman yacare) tail fillets subjected to traditional hot smoking and liquid smoke.

BACKGROUND: The present study aimed to evaluate the effects of hot smoking and liquid smoke on process yield, physicochemical properties, microbiological parameters, fatty acid profile, benzo(a)pyrene levels, and sensory profile of Pantanal yacare tail fillets. The fillets were subjected to two types of smoking processes: hot smoking and liquid smoke flavoring. RESULTS: The process yield of liquid-smoked fillets was higher (69.8%) compared to hot-smoked fillets (58.0%). All fillets were with good microbiological quality and low benzo(a)pyrene levels and were well accepted by consumers. The hot-smoked fillets and the liquid-smoked fillets presented 456.2 and 589.7 g kg-1 moisture, 262.3 and 263.7 g kg-1 crude protein, 218 and 85 g kg-1 total lipids, and 26.0 and 20.9 g kg-1 ash, respectively. The major fatty acids identified in the smoked tail fillets were palmitic, stearic, oleic, and linoleic acids. CONCLUSION: The liquid-smoked fillets had lower lipid content, and higher process yield because of lower losses; thus, they proved to be more advantageous and practical to obtain than the hot-smoked fillets. © 2022 Society of Chemical Industry.

Tanned leather of the paiche Arapaima gigas Schinz, 1822 (Arapaimidae) with extracts of vegetable origin to replace chromium salts.

With the intensification of fish farming, the amount of residues also increased. One of the by-products generated is leather. However, several factors influence its quality, among them, the types of tanning used. Paiche (Arapaima gigas) is the largest freshwater fish in the world, and therefore has great potential in the use of leather, in addition to being one of the most cultivated fish in the Rondônia state. The aimed was to evaluate the physicomechanical resistance, histological and morphological aspects in different directions of the fibers of the paiche to evaluate the tanning with chromium oxide and vegetable tannin. Paiches with an average weight of 12.0 kg were used, skins were made and tanned using chromium and vegetable tannin as techniques. After tanning, 20 specimens were removed in longitudinal, transverse and diagonal directions to the fish body, to determine resistance in dynamometer and leather for histological analysis, scanning electron microscopy and physical-chemical analysis. The average thickness of the specimens of the leathers ranged 1.79mm to 2.82mm, in addition, there was no interaction between the type of tanning agent and the directions obtained for strength, traction and elongation. Regarding the progressive tearing test, there was also no interaction effect. However, the defined factors had relevant differences for the maximum and average amount applied, and the leathers tanned with vegetable tannin expanded to larger dimensions 110.19 and 85.52 N. According to the images obtained by histology and scanning microscopy, they presented that in the longitudinal and transverse direction the collagen fibers are presented in layers parallel to the leather surface and in the diagonal direction the interlacing is more intense, that is, in addition to the overlapping layers intercalated thinner, close to the surface, fiber bundles can also be seen crossing each other. It is concluded that leathers tanned with vegetable tannin have less resistance than leathers tanned with chromium salts for traction to rupture and greater resistance to tear.