Proposal of Combined Noise and Hand-Arm Vibration Index for Occupational Exposure: Application to a Study Case in the Olive Sector.

In many production and industrial sectors, workers are exposed to noise and hand-arm vibrations (HAV). European directives have established the maximum limit values or exposure action values for noise and vibration independently. However, in many cases, workers who endure hand-arm vibration also receive high noise levels. This research suggests a procedure to aid the establishment of precautionary measures for workers with simultaneous exposure to both physical agents. This procedure defines a combined index based on the energy doses for both noise and HAV. From this combined index, the suggested methodology allows a recommended exposure time for workers with simultaneous noise and HAV exposure to be calculated. This methodology can be adapted to tackle the relative importance assigned to both agents according to the safety manager and new knowledge on combined health effects. To test this method, a measurement campaign under real working conditions was conducted with workers from the olive fruit-harvesting sector, where a variety of hand-held machinery is used. The results of the study case show that the suggested procedure can obtain reliable exposure time recommendations for simultaneous noise and HAV exposures and is therefore a useful tool for establishing prevention measures.

Monitoring and Assessment of Indoor Environmental Conditions in Educational Building Using Building Information Modelling Methodology.

Managing indoor environmental quality (IEQ) is a challenge in educational buildings in the wake of the COVID-19 pandemic. Adequate indoor air quality is essential to ensure that indoor spaces are safe for students and teachers. In fact, poor IEQ can affect academic performance and student comfort. This study proposes a framework for integrating occupants' feedback into the building information modelling (BIM) methodology to assess indoor environmental conditions (thermal, acoustic and lighting) and the individual airborne virus transmission risk during teaching activities. The information contained in the parametric 3D BIM model and the algorithmic environment of Dynamo were used to develop the framework. The IEQ evaluation is based on sensor monitoring and a daily schedule, so the results show real problems of occupants' dissatisfaction. The output of the framework shows in which range the indoor environmental variables were (optimal, acceptable and unacceptable) and the probability of infection during each lecture class (whether or not 1% is exceeded). A case study was proposed to illustrate its application and validate it. The outcomes provide key information to support the decision-making process for managing IEQ and controlling individual airborne virus transmission risks. Long-term application could provide data that support the management of ventilation strategies and protocol redesign.

Modelling and visualization for the analysis and comprehension of the acoustic performance of buildings through the implementation of a building information modelling-based methodology.

Technical and technological advances have revolutionised the architecture, engineering, and construction industries in recent decades. Building information modelling (BIM) methodology has become essential in the process of information management and the development of building projects. This study aims to analyse the potential advantages of the implementation of BIM-based models for the acquisition of theoretical and procedural knowledge about building acoustics. This procedure was implemented as part of a problem-solving exercise in Science, Technology, Engineering, and Mathematics (STEM) university degrees. For this purpose, three-dimensional (3D) BIM models were generated to assess the contribution of their implementation in the process of visualization, comprehension, and analysis of the acoustic behaviour of buildings. The participants' experiences and satisfaction with the BIM models were measured through a questionnaire. The results showed a high level of satisfaction among the participants and good potential for the application of 3D models based on BIM methodology for the acquisition of knowledge and practical skills in building acoustics. These results highlight the potential of BIM models to provide information for understanding the procedure followed during data collection in the experimental analysis and to facilitate the understanding of system behavior.

Reopening higher education buildings in post-epidemic COVID-19 scenario: monitoring and assessment of indoor environmental quality after implementing ventilation protocols in Spain and Portugal.

Post-epidemic protocols have been implemented in public buildings to keep indoor environments safe. However, indoor environmental conditions are affected by this decision, which also affect the occupants of buildings. This fact has major implications in educational buildings, where the satisfaction and learning performance of students may also be affected. This study investigates the impact of post-epidemic protocols on indoor environmental conditions in higher education buildings of one Portuguese and one Spanish university. A sensor monitoring campaign combined with a simultaneous questionnaire was conducted during the reopening of the educational buildings. Results showed that although renewal air protocols were effective and the mean CO2 concentration levels remained low (742 ppm and 519 ppm in Portugal and Spain universities, respectively), students were dissatisfied with the current indoor environmental conditions. Significant differences were also found between the responses of Portuguese and Spanish students. Indeed, Spanish students showed warmer preferences (thermal neutrality = 23.3℃) than Portuguese students (thermal neutrality = 20.7℃). In terms of involved indoor factors, the obtained data showed significant correlations (p < 0.001) between acoustic factors and overall satisfaction in the Portuguese students (ρ = 0.540) and between thermal factors and overall satisfaction in the Spanish students (ρ = 0.522). Therefore, indoor environmental conditions should be improved by keeping spaces safe while minimizing the impact of post-epidemic protocols on student learning performance.

Whole Body Vibration Exposure Transmitted to Drivers of Heavy Equipment Vehicles: A Comparative Case According to the Short- and Long-Term Exposure Assessment Methodologies Defined in ISO 2631-1 and ISO 2631-5.

The construction and transport sectors are the industries with the highest proportions of workers exposed to vibrations in the European Union. Heavy equipment vehicle (HEV) drivers often perform operations on different uneven surfaces and are exposed to whole body vibration (WBV) on a daily basis. Recently, a new version of ISO 2631-5 was published. However, since this new method required as input the individual exposure profile and the acceleration signals recorded on more surfaces, limited studies have been carried out to evaluate HEV operations according to this standard. The objectives of this study were to assess the WBV exposure using the methods defined in ISO 2631-1:1997 and ISO 2631-5:2018 and to compare the obtained health risk assessments between drivers with different anthropometric characteristics. For this purpose, two drivers were selected and a field measurement campaign was conducted. Regarding short-term assessment, results showed that VDV was the most restrictive method with exposure levels above the exposure action limit value, while SdA indicated that the same exposures were safe for the worker. With respect to long-term assessment, Risk Factor RA showed that the driver with the highest body mass index was the only one who exceeded the low probability limit of adverse health effects.

Monitoring and Assessment of Indoor Environmental Conditions after the Implementation of COVID-19-Based Ventilation Strategies in an Educational Building in Southern Spain.

Since students and teachers spend much of their time in educational buildings, it is critical to provide good levels of indoor environmental quality (IEQ). The current COVID-19 pandemic has shown that maintaining a good indoor air quality level is an effective measure to control the transmission of the SARS-CoV-2 virus. This study used sensors to monitor key IEQ factors and assess several natural ventilation scenarios in a classroom of the University of Granada. Subsequently, the IEQ factors (temperature, relative humidity, CO2 concentration, acoustic environment, and air velocity) were evaluated for the selected ventilation scenarios in the occupied classroom, and the field monitoring was carried out in two different assessment periods, winter and summer. The obtained results show that the CO2 concentration levels were well below the recommended limits. However, the maintenance of the recommended thermal and acoustic IEQ factors was significantly affected by the natural ventilation strategies (temperature and relative humidity values were very close to the outside values, and the background sound pressure level was over 35 dBA during the entire assessment). The proper measurements and careful selection of the appropriate ventilation scenarios become of utmost importance to ensure that the ventilation rates required by the health authorities are achieved.

Analysis of Impact of Natural Ventilation Strategies in Ventilation Rates and Indoor Environmental Acoustics Using Sensor Measurement Data in Educational Buildings.

Indoor environmental conditions can significantly affect occupants' health and comfort. These conditions are especially important in educational buildings, where students, teachers and staff spend long periods of the day and are vulnerable to these factors. Recently, indoor air quality has been a focus of attention to ensure that disease transmission in these spaces is minimised. In order to increase the knowledge in this field, experimental tests have been carried out to characterise the impact of natural ventilation strategies on indoor air quality and the acoustic environment. This study has evaluated three ventilation scenarios in four different classrooms in buildings of the University of Granada, considering different window and door opening configurations. Ventilation rates were estimated using the CO2 Decay Method, and background noise recordings were made in each classroom for acoustic tests. Results show that specific natural ventilation strategies have a relevant impact that is worth considering on the background noise in indoor spaces. In this sense ventilation rates provided by the different configurations varied between 3.7 and 39.8 air changes per hour (ACH) and the acoustic tests show a background noise ranging from 43 to 54 dBA in these scenarios. Consequently, managers and teachers should take into account not only the ACH, but also other collateral impacts on the indoor environmental conditions such as the thermal comfort or the acoustic environment.

A methodology for assessment of long-term exposure to whole-body vibrations in vehicle drivers to propose preventive safety measures.

INTRODUCTION: The appearance of musculoskeletal disorders (MDs) in professional drivers due to exposition to whole-body vibration (WBV) makes it relevant to assess this exposure. The European Directive 2002/44/EC has two methods to evaluate exposure to WBV (defined in ISO2631-1:2008). These methods evaluate the exposure associated with an 8-hour working day; however, MDs due to WBV could also be caused by accumulated exposure to vibrations over long term, and hence, the methods defined in the European directive may be limited in their ability to ensure the safety of workers exposed to WBV throughout their years of employment. METHOD: A detailed comparison and discussion of methods defined in the European Directive and the ISO2631-5:2018 was used as a starting point of the main results of this paper. On this basis, a new methodology for the management and organization of preventive measures is proposed to consider the assessment of ISO2631-5:2018 standard and the full working life of workers. Experimental data to assess exposure to WBV in heavy equipment vehicle (HEV) drivers under different road surface conditions and range of velocities were considered to illustrate the process of the proposed methodology. RESULTS: The methods defined in the standards provide different assessments leading to a different possible consideration of safe operations when the risks associated with them may actually be high. The proposed methodology can be used with the aim of ensuring safety of workers throughout their working lives and providing an easy implementation of the calculations of ISO2631-5:2018 standard. CONCLUSIONS: A procedure to assess the health risk probability to which the HEV worker is exposed in terms of the exposure years and a different range of operational vehicle speeds is proposed and exemplified with a study case. Practical applications: This study provides a practical tool for the management of WBV exposure related to work-tasks in HEV drivers. Safety managers should consider the global exposition to WBV throughout their working life, and this research provides an easy tool to accomplish it.