Outcomes of a 1-Year Prospective Single-Arm Cohort Study Using a Novel Macro-Hybrid Implant Design in Extraction Sockets: Part 1.

A novel macro-hybrid implant design was introduced to afford high apical primary stability and more coronal space to preserve the circumferential extraction socket architecture. This study presents 1-year data from a prospective single-arm cohort study. The data was distilled based on the following criteria: (1) single-tooth immediate tooth replacement therapy (ITRT) in the maxillary anterior and premolar regions in intact (Type 1) extraction sockets that were (2) treated with the dual-zone grafting technique. The clinical and radiographic outcomes of 48 ITRT implants were evaluated. The mean ± SD labial plate dimension changes were 0.33 ± 0.41 mm at the implant abutment interface (L1) and 0.34 ± 0.40 mm at 5.0 mm below (L2). The mean labial plate dimension (thickness) at the 1-year recall was 2.27 ± 0.88 mm (L1) and 1.95 ± 0.95 mm (L2). At ITRT, the ridge contour at the free gingival margin and 3.0 mm below it were 7.54 ± 0.93 mm and 9.44 ± 2.36 mm, respectively; after final restoration delivery, the corresponding values were 7.45 ± 0.95 mm and 10.23 ± 2.30 mm, respectively. The peri-implant soft tissue thickness (PISTT) at the time of implant-level impression-making was 3.29 ± 0.73 mm, with an average Pink Esthetic Score of 12.79. A macro-hybrid implant design showed high levels of primary stability (~60 Ncm), stable ridge contour at 1 year, a labial plate dimension between 1.5 and 2.0 mm, and PISTT > 3.0 mm, which may be a critical factor in providing stable, long-term esthetic outcomes.

Immediate occlusal loading in edentulous jaws, CT-guided surgery and fixed provisional prosthesis: a maxillary arch clinical report.

Immediate occlusal loading (IOL) in edentulous jaws has been reported in numerous publications with implant cumulative survival rates consistent with conventional, unloaded healing protocols. Computed Tomography (CT)-guided surgery has more recently been developed and accepted as an additional treatment modality for maxillary and mandibular implant placement, with or without IOL. Reports as to the accuracy of planned versus actual implant placement in CT-guided surgeries have indicated that CT-guided surgery is not 100% accurate; standard deviations have been reported with values between 1 and 2 mm in terms of actual versus planned placement. The purpose of this article is to review the clinical parameters associated with IOL, and CT-guided surgery in edentulous jaws; and to present a clinical case illustrating the clinical and laboratory phases of treatment. The illustrated treatment was accomplished with an IOL protocol and includes fabrication and placement of a laboratory-processed provisional maxillary prosthesis. This particular protocol had slightly increased costs relative to conventional implant placement; however, the clinicians and patient benefited from improved accuracy of the provisional prostheses and decreased chairtime for the clinical procedures. The benefits and limitations of this treatment protocol are also discussed.

Immediate provisionalization of NanoTite implants in support of single-tooth and unilateral restorations: one-year interim report of a prospective, multicenter study.

BACKGROUND: Clinical studies reporting immediate loading of endosseous implants for edentulous cases and for fixed partial restorations have been well documented with satisfactory survival rates. Implants with a recently developed, nanometer-scale surface topography (NanoTite, BIOMET 3i, Palm Beach Gardens, FL, USA), created by discrete crystalline depositions (DCD) of calcium phosphate nano-crystals onto a dual acid-etched (DAE) surface, show enhanced early fixation in preclinical studies when compared with DAE-surfaced implants. These outcomes suggest DCD-surfaced implants may be advantageous for immediate loading approaches. OBJECTIVE: The aim of this prospective, multicenter, observational study is to report clinical outcomes for DCD-surfaced implants placed in immediate functional support of single- and multi-unit restorations according to an immediate loading protocol. MATERIALS AND METHODS: One hundred eighty-five patients enrolled at 15 international study centers received a total of 335 implants supporting 216 immediate provisionalizations consisting of 128 single-tooth restorations and 88 fixed restorations. Of the 335 implants, 77% are located in posterior and 23% in anterior regions with 55.5% of the total in mandibles and 44.5% in maxillae. Patients were evaluated for implant mobility, gingival health, symptomatology, and radiographic outcomes. RESULTS: At the time of this 1-year interim report, a total of 17 failures have been observed in 11 patients, yielding a cumulative survival rate of 94.9%. CONCLUSION: Relative to other prospective, multicenter studies of immediately loaded implants with various surface enhancements, NanoTite implants perform comparatively well when immediately provisionalized with single-tooth and fixed restorations.

A retrospective analysis of osseotite NT implants in clinical practice: 1-year follow-up.

This article reports the preliminary results from a clinical study involving the use of implants with a natural taper design in edentulous and partially edentulous patients. Implants were followed for at least 12 months after occlusal loading. Three hundred nine implants were placed by two periodontists (176 maxillary, 133 mandibular; 198 anterior, 111 posterior). Digital radiographs were taken immediately after implant placement and 1 year after occlusal loading. Computerized measurements were made, with distances calculated between the implant restorative platforms and the greatest heights of interproximal bone on both interproximal surfaces at the time of implant placement and 12 months postplacement. At the 12-month recall appointments, it was noted that 8 of the 309 implants had failed. Osseotite NT implants can be used in the treatment of edentulous and partially edentulous patients using two-stage, single-stage, and immediate occlusal loading protocols with survival rates equivalent to those seen for cylindrically shaped implants.

Treatment of edentulous and partially edentulous patients with CAD/CAM frameworks: a pilot case study.

Computer-assisted design/computer-assisted manufacturing (CAD/CAM) has been used successfully in commercial industry for several decades and is only now becoming more common for use within the clinical setting. This presentation will outline how CAD/CAM frameworks present numerous advantages over conventional castings when used to treat edentulous and partially edentulous patients in such areas as strength, biocompatibility, and precision machining. Recent advancements in CAD/CAM technology have decreased the costs associated with the fabrication of implant- and tooth-borne frameworks.

Indexing and provisional restoration of single implants.

PURPOSE: The purpose of this article is to provide a review of provisional implant restorations and surgical indexing procedures for partially edentulous patients. MATERIALS AND METHODS: Case studies will be presented that illustrate the interim restoration of dental implants including stock healing abutments, premachined titanium abutments, resin polymer abutments, and acid etch composite resin pontics. Single stage, immediate, and immediate nonocclusal loading protocols will be illustrated. RESULTS: All of the implants illustrated in this report were clinically successful. CONCLUSION: Provisional restoration of implants is an important part of overall implant treatment for both esthetic and functional concerns. Implants may be loaded with functional occlusion at various time intervals postimplant placement depending on implant manufacturer, implant design, quality, and quantity of bone with high levels of implant survival.

Immediate Occlusal Loading (IOL) of dental implants: predictable results through DIEM guidelines.

For years, dental implants have been loaded immediately upon implant placement with varying degrees of success. As clinicians' understanding of the biological and mechanical factors involved in immediate occlusal loading (IOL) has evolved, the success of these procedures has increased--particularly as a treatment option for the restoration of the edentulous mandible or the mandible that will be rendered edentulous during treatment. Due to increasing interest in this treatment alternative, the authors have provided a clear definition of the terminology associated with IOL and have demonstrated the DIEM Guidelines used to increase the success and predictability of such treatment. This presentation also introduces new implant components that simplify the clinical application of the immediate loading concept, enhancing its benefits and acceptance among dental patients and practices alike.