Evaluation of using aluminum sulfate and water-soluble Moringa oleifera seed lectin to reduce turbidity and toxicity of polluted stream water.

Aluminum salts are used as coagulants in water treatment; however, the exposure to residual aluminum has been associated with human brain lesions. The water-soluble Moringa oleifera lectin (WSMoL), which is extracted with distilled water and isolated by chitin chromatography, has coagulant activity and is able to reduce the concentration of metal ions in aqueous solutions. This study evaluated the potential of using aluminum sulfate and WSMoL to reduce the turbidity and toxicity of water from the Cavouco stream located in Recife, Pernambuco, Brazil. The water sample used (called P1) was collected from the stream source, which was found to be strongly polluted based on physicochemical and water quality analyses, as well as ecotoxicity assays with Artemia salina and seeds of Eruca sativa and Lactuca sativa. The assays combining WSMoL and aluminum sulfate were more efficient than those that used these agents separately. Furthermore, the greatest reduction in turbidity (96.8%) was obtained with the treatment using aluminum sulfate followed by WSMoL, compared to when they were applied simultaneously (91.3%). In addition, aluminum sulfate followed by WSMoL treatment resulted in residual aluminum concentration (0.3 mg/L) that was much lower than that recorded after the treatment using only the salt (35.5 mg/L). The ecotoxicity of P1 was also strongly reduced after the treatments. In summary, the combined use of aluminum sulfate and WSMoL was efficient in promoting a strong reduction of turbidity and ecotoxicity of a polluted water sample, without resulting in a high residual aluminum concentration at the conclusion of the treatment.

Copper-induced adaptation, oxidative stress and its tolerance in Aspergillus niger UCP1261

Background The effects of exposure to copper, during growth, on the production of biomass, total protein, catalase, glutathione-S transferase, glutathione peroxidase, peroxidase, polyphosphate, acid and alkaline phosphatases, ultrastructure and the ability to remove this metal from Aspergillus niger, obtained from caatinga soil, were evaluated. Results All parameters tested were influenced by the concentration of metal in the culture medium. The presence of metal induced high levels of antioxidant enzymes, including lipid peroxidation, thereby revealing the appearance of an oxidative stress response. The variation in polyphosphate levels indicates the participation of the polymer in response to stress induced by copper. The activities of the phosphatases were positively influenced by growing them in the presence of copper. Ultrastructure changes in the cell surface, electron density, thickness, and septation were visualized by exposing cells to increasingly larger concentrations of metal. The isolate was able to remove the agent from the growth medium, while maintaining its physiological functions. The metal removed from the cultures exposed to 0.5 mM, 1 mM and 2 mM copper exhibited percentages of removal equivalent to 75.78%, 66.04% and 33.51%. Conclusions The results indicate that the isolate was able to grow in high concentrations of copper, activates mechanisms for adaptation and tolerance in the presence of metal, and is highly efficient at removing the agent. Such data are fundamental if a better understanding is to be reached of the cellular and molecular abilities of native isolates, which can be used to develop bioprocesses in environmental and industrial areas.

Comparison of smear layer removal using the Nd:YAG laser, ultrasound, ProTaper Universal system, and CanalBrush methods: an in vitro study.

INTRODUCTION: The aim of this study was to compare the efficacy of the Nd:YAG laser, ultrasound, the ProTaper Universal system (Dentsply Maillefer, Ballaigues, Switzerland), and the CanalBrush (Coltene Whaledent, Langenau, Germany) methods for the removal of the smear layer from the apical third of root canals. METHODS: Fifty distal root canals from extracted human mandibular first molars were instrumented up to ProTaper Universal F5 and divided randomly into 5 groups (n = 10) according to the following final irrigation agitation techniques: no agitation (control), ProTaper Universal file, ultrasound, CanalBrush, and Nd:YAG laser. Specimens were observed under a scanning electron microscope. The presence of the smear layer was evaluated using a 3-grade scoring system. The data were analyzed with Cohen kappa, Kruskal-Wallis, and Mann-Whitney U tests. A level of significance of .05 was adopted. RESULTS: The ultrasound group performed significantly better than the rest of the groups; 56.6% of the specimens revealed no smear layer, 44.4% showed the presence of a moderate smear layer, and no heavy smear layers were observed. In the Nd:YAG laser group, 30% of the specimens presented with no smear layer, 70% showed the presence of a moderate smear layer, and no heavy smear layers were observed. In contrast, a heavy smear layer was observed on the surfaces of the root canals in the CanalBrush (23.4%), ProTaper Universal (13.4%), and control (86.6%) groups. Statistically significant differences were observed (P < .05). CONCLUSIONS: None of the agitation methods completely removed the smear layer. However, the ultrasound method performed significantly better followed by the Nd:YAG laser, the CanalBrush, and the ProTaper Universal system. Agitation of the irrigant improved smear layer removal in the apical third of the canal.

Green conversion of agroindustrial wastes into chitin and chitosan by Rhizopus arrhizus and Cunninghamella elegans strains.

This article sets out a method for producing chitin and chitosan by Cunninghamella elegans and Rhizopus arrhizus strains using a green metabolic conversion of agroindustrial wastes (corn steep liquor and molasses). The physicochemical characteristics of the biopolymers and antimicrobial activity are described. Chitin and chitosan were extracted by alkali-acid treatment, and characterized by infrared spectroscopy, viscosity and X-ray diffraction. The effectiveness of chitosan from C. elegans and R. arrhizus in inhibiting the growth of Listeria monocytogenes, Staphylococcus aureus, Pseudomonas aeruginosa, Salmonella enterica, Escherichia coli and Yersinia enterocolitica were evaluated by determining the minimum inhibitory concentrations (MIC) and the minimum bactericidal concentrations (MBC). The highest production of biomass (24.60 g/L), chitin (83.20 mg/g) and chitosan (49.31 mg/g) was obtained by R. arrhizus. Chitin and chitosan from both fungi showed a similar degree of deacetylation, respectively of 25% and 82%, crystallinity indices of 33.80% and 32.80% for chitin, and 20.30% and 17.80% for chitosan. Both chitin and chitosan presented similar viscosimetry of 3.79-3.40 cP and low molecular weight of 5.08×10³ and 4.68×10³ g/mol. They both showed identical MIC and MBC for all bacteria assayed. These results suggest that: agricultural wastes can be produced in an environmentally friendly way; chitin and chitosan can be produced economically; and that chitosan has antimicrobial potential against pathogenic bacteria.

Effect of corn steep liquor (CSL) and cassava wastewater (CW) on chitin and chitosan production by Cunninghamella elegans and their physicochemical characteristics and cytotoxicity.

Microbiological processes were used for chitin and chitosan production with Cunninghamella elegans UCP/WFCC 0542 grown in different concentrations of two agro-industrial wastes, corn steep liquor (CSL) and cassava wastewater (CW) established using a 2² full factorial design. The polysaccharides were extracted by alkali-acid treatment and characterized by infrared spectroscopy, viscosity, thermal analysis, elemental analysis, scanning electron microscopy and X-ray diffraction. The cytotoxicity of chitosan was evaluated for signs of vascular change on the chorioallantoic membrane of chicken eggs. The highest biomass (9.93 g/L) was obtained in trial 3 (5% CW, 8% CSL), the greatest chitin and chitosan yields were 89.39 mg/g and 57.82 mg/g, respectively, and both were obtained in trial 2 (10% CW, 4% CSL). Chitin and chitosan showed a degree of deacetylation of 40.98% and 88.24%, and a crystalline index of 35.80% and 23.82%, respectively, and chitosan showed low molecular weight (LMW 5.2 × 10³ Da). Chitin and chitosan can be considered non-irritating, due to the fact they do not promote vascular change. It was demonstrated that CSL and CW are effective renewable agroindustrial alternative substrates for the production of chitin and chitosan.

Oxidation of dibenzothiophene (DBT) by Serratia marcescens UCP 1549 formed biphenyl as final product.

BACKGROUND: The desulphurization of dibenzothiophene (DBT), a recalcitrant thiophenic fossil fuel component by Serratia marcescens (UCP 1549) in order for reducing the Sulphur content was investigated. The Study was carried out establishing the growth profile using Luria Bertani medium to different concentrations of DBT during 120 hours at 28°C, and orbital Shaker at 150 rpm. RESULTS: The results indicated that concentrations of DBT 0.5, 1.0 and 2.0 mM do not affected the growth of the bacterium. The DBT showed similar Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MCB) (3.68 mM). The desulphurization of DBT by S. marcescens was used with 96 hours of growth on 2 mM of DBT, and was determined by gas chromatography (GC) and GC-mass spectrometry. In order to study the desulphurization process by S. marcescens was observed the presence of a sulfur-free product at 16 hours of cultivation. CONCLUSIONS: The data suggests the use of metabolic pathway "4S" by S. marcescens (UCP 1549) and formed biphenyl. The microbial desulphurization process by Serratia can be suggest significant reducing sulphur content in DBT, and showed promising potential for reduction of the sulfur content in diesel oil.

Role of the morphology and polyphosphate in Trichoderma harzianum related to cadmium removal.

This study concerns the metabolism of polyphosphate in Trichoderma harzianum, a biocontrol agent with innate resistance against most chemicals used in agriculture, including metals, when grown in the presence of different concentrations of cadmium. The biomass production was affected by the concentration of metal used. Control cultures were able to accumulate polyphosphate under the conditions used. Moreover, the presence of cadmium induced a reduction in polyphosphate content related to the concentration used. The morphological/ultrastructural aspects were characterized by using optical and scanning electron microscopy, and were affected by the heavy metal presence and concentration. The efficiency of cadmium removal revealed the potential of the microorganism for use in remediation. The data indicate the potential for polyphosphate accumulation by the fungus, as well as its degradation related to tolerance/survival in the presence of cadmium ions.