Effect of high irradiance and short exposure times on the depth of cure of six bulk-fill resin composites.

This study examined the effect of high irradiance and short exposure times on the depth of cure of six resin-based composites (RBCs). Bluephase PowerCure and the Valo X light-curing units (LCUs) were used to photocure bulk-fill RBCs for their recommended exposure times: Admira Fusion x-tra (AFX/20s), Aura Bulk Fill (ABF/20s), Filtek One Bulk Fill (FOB/20s), Opus Bulk Fill APS (OBF/30s), Tetric EvoCeram Bulk Fill (TEC/10s) and Tetric PowerFill (TPF/10s). In addition, all bulk-fill RBCs were tested for depth of cure with one short 3 s exposure time from the Bluephase PowerCure or the Valo X in the Xtra Power mode. The RBCs (n = 10 per RBC) were inserted into a 4 mm diameter metal mold and covered by a polyester strip before being photocured. After 24 h of storage, uncured RBC was scraped away to determine the depth of cure of the RBCs. None of the RBCs achieved a 4 mm depth of cure. The depth of cure of TEC and TPF was unaffected by the exposure times (recommended or short) when using the Valo X. The depth of cure of AFX/20s, AFX/Xtra Power, ABF/Xtra Power, FOB/Xtra Power, and OBF/30s RBCs was greater when using Valo X compared to the Bluephase PowerCure. It was concluded that short exposure times can reduce depth of cure and should only be used for some RBCs.

Comparison of self-etching and conventional bifunctional coupling agent in lithium disilicate ceramic: A systematic review and meta-analysis.

Background: The aim of this systematic review is to determine the effectiveness of self-etching primers in comparison to the conventional protocol with hydrofluoric acid and silane treatment for bonding lithium disilicate ceramics. Material and Methods: The formulated PICO question for this research was: "Does self-etching silane primer surface treatment in lithium disilicate ceramics present a similar bond strength value compared to conventional hydrofluoric acid and silane treatment?". Combinations of words and appropriate truncations were adapted for each database. For the selection, duplicate articles were systematically eliminated using Mendeley software. The Cohen's Kappa statistic was then computed, RoBDEMAT questions were addressed, and the meta-analyses were conducted using RevMan 5.4, at a significance level of 5%. Results: Two independent reviewers conducted a blind and independent analysis of 190219 articles from PubMed, Scopus, Web of Science, and OpenGrey. Subsequently, they extracted data from 21 studies for the systematic review and in 16 the meta-analysis. In all in vitro studies, the most frequently cited concentration of hydrofluoric acid was 5%. In the meta-analysis, no statistical differences were observed between the two treatments concerning bond strength. Conclusions: Self-etching silane primers demonstrate promising results in lithium disilicate bonding, suggesting their potential as an alternative surface treatment to hydrofluoric acids + silane. Key words:Lithium disilicate, Hydrofluoric acid, Dental Porcelain, Ceramics, Silanes.

Influence of new complete dentures on the touch perception threshold and quality of life of edentulous patients.

OBJECTIVE: To evaluate the touch perception threshold of the alveolar mucosa and quality of life of edentulous patients before (T0) and 30 days after (T1) the insertion of new complete dentures. BACKGROUND: Touch perception is important so that edentulous patients can detect the position of complete dentures in their mouth. MATERIALS AND METHODS: This study included 32 complete denture wearers with good oral and systemic health and no temporomandibular disorders for at least 5 years. At each time point (T0 and T1), two tests were performed (touch perception threshold and quality-of-life scale). The touch perception threshold (Von Frey or Semmes-Weinstein test) was assessed using nylon monofilaments on the regions of the alveolar mucosa of the maxilla and mandible. The Oral Health Impact Profile for edentulous individuals (OHIP-EDENT) was administered to evaluate oral health-related quality of life. RESULTS: In the maxilla and mandible, the touch perception thresholds for all regions of the alveolar mucosa were significantly lower at T1 than at T0. The OHIP-EDENT mean scores showed that the overall quality of life was significantly better at T1 (3.6) than at T0 (4.7), and a significant improvement in quality of life was observed in all domains of the OHIP-EDENT at T1. For touch perception threshold, effect sizes ranged from 0.4 to 0.8; and for quality of life, effect sizes ranged from 0.4 to 1.0. CONCLUSIONS: New complete dentures reduced the touch perception threshold of the alveolar mucosa of both edentulous arches and improved individuals' quality of life.

Insulin signaling and mitochondrial phenotype of skeletal muscle are programmed in utero by maternal diabetes.

Maternal diabetes may influence glucose metabolism in adult offspring, an area with limited research on underlying mechanisms. Our study explored the impact of maternal hyperglycemia during pregnancy on insulin resistance development. Adult female Sprague-Dawley rats from control and diabetic mothers were mated, and their female offspring were monitored for 150 days. The rats were euthanized for blood and muscle samples. Maternal diabetes led to heightened insulin levels, increased HOMA-IR, elevated triglycerides, and a raised TyG index in adult offspring. Muscle samples showed a decreased protein expression of AMPK, PI3K, MAPK, DRP1, and MFF. These changes induced intergenerational metabolic programming in female pups, resulting in insulin resistance, dyslipidemia, and glucose intolerance by day 150. Findings highlight the offspring's adaptation to maternal hyperglycemia, involving insulin resistance, metabolic alterations, the downregulation of insulin signaling sensors, and disturbed mitochondrial morphology. Maintaining maternal glycemic control emerges as crucial in mitigating diabetes-associated disorders in adult offspring.

Steel drills versus zirconia drills on heat generation at the surgical site of dental implants: A systematic review and meta-analysis.

Objective: The aim was to evaluate the difference in the heat generated between zirconia (Zr) and steel (SS) drills, during implant site preparation. Material and methods: This systematic review followed the PRISMA methodology criteria and used the JBI Critical Assessment Guidelines for Quasi-Experimental Studies for quality assessment. The electronic search was conducted by using the PubMed/MEDLINE, Embase, and Cochrane Library databases to January 2023. The formulated population, intervention, comparison, outcome (PICO) question was "Do zirconia drills generate less heat than steel drills during implant site preparation?". The meta-analysis was based on an inverse variance (IV) method. Results: This review included 10 studies in vitro that used zirconia drills compared to steel drills with or without coatings. The meta-analysis indicated a significant difference between Zr drills and SS drills, with a lower bone temperature variation with Zr drills. Conclusions: Despite the limitations of this review, it was concluded that Zr drills had significantly less temperature variation than SS drills.

[Effect of Aging on the Mechanical Properties of CAD/CAM-Milled and 3D-Printed Acrylic Resins for Denture Bases].

PURPOSE: The purpose of this study was to investigate the mechanical properties of acrylic resins at different aging times for denture bases manufactured using the conventional method, microwave processing, milling, and 3D printing. MATERIALS AND METHODS: A total of 160 rectangular samples (64 Å~ 10 Å~ 3.3 ± 0.03 mm) were prepared, divided among the four main resin groups, and subdivided into four analysis times (T0, T1, T2, and T3), resulting in 10 samples per subgroup. The samples were stored in distilled water at 37° ± 2°C for 24 hours (T0), then subjected to thermocycling at temperatures of 5° ± 1°C and 55° ± 1°C in different numbers of cycles: 5,000 (T1); 10,000 (T2); and 20,000 (T3). The mechanical properties evaluated were surface microhardness, flexural strength, and modulus of elasticity. Statistical differences between resin groups and aging time were evaluated using two-way analysis of variance (P < .05). RESULTS: The 3D-printed resin showed the significantly lowest values of microhardness, flexural strength, and modulus of elasticity compared to other resins (P < .001). CONCLUSIONS: The CAD/CAM-milled denture resin showed mechanical properties similar to those of traditional resins (conventional and microwave-processed). The 3D-printing resin did not show adequate mechanical properties for long-term clinical use. Despite this, new studies are developing better properties of this resin for long-term use.

Effect of Chlorhexidine and Tea Tree Oil on Reducing the Number of Oral Microorganisms.

OBJECTIVES: Thus, the aim of this study was to compare the effect of using two preoperative mouthwashes (0.12% chlorhexidine and 0.2% tea tree oil) on the number of colonies of oral microorganisms. MATERIALS AND METHODS: Forty participants who needed to be rehabilitated with dental implants were included in this study. They were randomly divided into two groups (chlorhexidine group and tea tree group; n = 20, each). For each group, saliva samples were collected at four different times: T0 (initially)-before using the mouthwash, T1-after 1 minute of using the mouthwash, T10-after 10 minutes of using the mouthwash, and T60-after 60 minutes of using the mouthwash. At T0 and T1, saliva samples were collected before implant placement surgery, and at T10 and T60, saliva samples were collected during surgery. In each group, one saliva sample was collected at each evaluated time point for each patient, totaling 4 saliva collections per patient. MSB agar (Mitis-Salivarius-Bacitracin) and BHI agar (Brain Heart Infusion) culture media were used in each group. Microbial colony counts were performed using a magnifying glass and recorded in CFU (colony forming units)/mL. Statistical analyses were performed using the Friedman, Mann-Whitney U and Wilcoxon tests (p < 0.05). RESULTS: Based on MSB agar culture medium, at T0, the number of Streptococcus mutans colonies in the chlorhexidine group was significantly higher compared with the tea tree group (p <0.05; MSB agar). The chlorhexidine group showed significantly lower CFU/mL values for Streptococcus mutans at T1, T10, and T60 compared with the tea tree group (p <0.05; MSB agar). Based on BHI agar culture medium, at T0, the chlorhexidine group showed a significantly lower value of CFU/mL compared with the tea tree group (p < 0.05; BHI agar). At T1, T10, and T60, the chlorhexidine group showed significantly lower CFU/mL values compared with the tea tree group (p <0.05; BHI agar). CONCLUSION: Chlorhexidine is more indicated as a preoperative mouthwash than tea tree oil, due to its significantly more effective antimicrobial action.

Correlation between Periotest value and implant stability quotient: a systematic review.

OBJECTIVES: To determine, through clinical studies, whether there is a correlation between the Periotest value (PTV) and the implant stability quotient (ISQ). CONTENT: Methods to evaluate the stability of dental implants. SUMMARY: A search was performed in the PubMed, Scopus, and Web of Science databases for articles on the proposed subject up to January 29, 2023, using search terms that combined "resonance frequency analysis" and "Periotest" with "correlation" or "relationship"; and combinations of "implant stability quotient" and "Periotest" with "correlation" or "relationship." The inclusion criteria were clinical studies in English involving human subjects who received dental implants and evaluating the correlation between PTV and ISQ. A total of 46 articles were screened, of which 10 were selected for full-text analysis, and eight articles were included in this review. Based on three articles, 75 % of the results of this systematic review showed a negative correlation between PTV and ISQ, regardless of the type of stability assessed. Based on the remaining five articles, 100 % (regardless of the patient's gender) and 66.66 % of the results showed a negative correlation for primary and secondary stability, respectively. There is a negative correlation between PTV and ISQ for both primary and secondary dental implant stability. OUTLOOK: This review can serve as a reference for the development of methodologies for future clinical studies on this topic.

Complete Denture - Border Molding Technique Using a Laboratory Condensation Silicone Putty: Review.

During the fabrication of a complete denture, functional impression is taken. Literature studies show that polydimethylsiloxane (condensation silicone) has not been reported by United States dental schools to perform border molding. Thus, the purpose of this article is to review the functional impression technique when border molding is performed with a laboratory condensation silicone putty.

Removable Partial Denture - Functional Impression Techniques: Review.

The objective of this article is to concisely review the main clinical techniques used to make the functional impression to manufacture a removable partial denture. Through this review, the dentist can develop his clinical knowledge.

Glyphosate-induced glioblastoma cell proliferation: Unraveling the interplay of oxidative, inflammatory, proliferative, and survival signaling pathways.

The aim of the present study was to investigate the impacts of glyphosate herbicide on the survival and proliferation of glioblastoma cells and to explore the molecular mechanisms underlying such effects. For this, cultured human glioblastoma cell line, A172, was exposed to the glyphosate analytical standard, a glyphosate-based herbicide formulation (GBH), or the metabolite aminomethylphosphonic acid (AMPA). The three compounds induced A172 cytotoxicity after 24 h of exposure, with more prominent cytotoxic effects after 48 and 72 h of treatment. Further experiments were performed by treating A172 cells for 6 h with glyphosate, GBH, or AMPA at 0.5 mg/L, which corresponds to the maximum residue limits for glyphosate and AMPA in drinking water in Brazil. Colony forming units (CFU) assay showed that AMPA increased the number of CFU formed, while glyphosate and GBH increased the CFU sizes. The three compounds tested altered the cell cycle and caused DNA damage, as indicated by the increase in γ-H2AX. The mechanisms underlying the pesticide effects involve the activation of Akt and mitogen-activated protein kinases (MAPKs) signaling pathways, oxidative imbalance, and inflammation. Glyphosate led to NLRP3 activation culminating in caspase-1 recruitment, while AMPA decreased NLRP3 immunocontent and GBH did not alter this pathway. Results of the present study suggest that exposure to glyphosate (isolated or in formulation) or to its metabolite AMPA may affect cell signaling pathways resulting in oxidative damage and inflammation, giving glioblastoma cells an advantage by increasing their proliferation and growth.

Prevalence of anophthalmia etiological factors in patients treated in a reference center: A retrospective study.

Background: Ocular prosthesis rehabilitation has an important social, psychological, esthetic, and functional role. Congenital factors, trauma, and tumors, among others, can cause anophthalmia, and it is essential to identify the etiology to guide its prevention and treatment. Methods: The aim of this study was to retrospectively investigate the records of patients treated from 2013 to 2020 by the Oral and Maxillofacial Prosthesis Group, aiming to identify the prevalence of patients with anophthalmia and the etiology of their anophthalmia. After approval by the Human Research Ethics Committee, two calibrated researchers evaluated 520 records, identifying those from patients with anophthalmia. The inclusion criteria were records with complete and legible information from patients with anophthalmia and a description of their etiology. Descriptive statistics were performed, and etiological factors were categorized into trauma, congenital cause, end-stage eye disease, and tumor. Spearman's correlation was performed to verify the relation between gender and anophthalmia etiology, with a 5% significance level. Seventy-two records were included in the study. Results: It was observed that 33.4% of patients were women and 66.6% were men. The etiologies were physical trauma (52.4%), tumor (21.8%), end-stage eye disease (16.6%), and congenital cause (9.2%), and there was no correlation between gender and these etiologies (p = .301). Conclusion: Most of the cases identified were of traumatic origin, which allows the establishment of preventive and educational measures to avoid new cases of anophthalmia.

Deleterious Effects of Cymbopogon nardus (L.) Essential Oil on Life Cycle and Midgut of the Natural Predator Ceraeochrysa claveri (Navás, 1911) (Neuroptera: Chrysopidae).

Cymbopogon nardus (citronella) essential oil (EO) has been widely used in the cosmetic and food industry due to its repellent and fumigant properties. The aim of this study was to evaluate its effects on the life cycle and midgut morphology of the natural predator Ceraeochrysa claveri. Larvae were fed on sugarcane borer eggs (Diatraea saccharalis) pretreated with citronella EO solutions (1-100 µg/mL in methanol, 5 s) or solvent and air-dried at room temperature for 30 min. Larval and pupal stage duration, the percentage of emergence of the insect, and malformed insects were recorded. One day after adults emerged from their cocoons, adult insects were used to obtain their midgut and analyzed using light microscopy. The chemical composition of C. nardus EO revealed that citronellal (25.3%), citronellol (17.9%), geraniol (11.6%), elemol (6.5%), δ-cadinone (3.6%), and germacrene D (3.4%) were the predominant compounds. Exposure to the EO produced a significant change in development duration for third instar and prepupa of the insect. The observed alterations in the lifecycle included prepupae with no cocoon formation, dead pupa inside the cocoon, and malformed adults. Several injuries in the midgut epithelium of exposed adults were registered, such as detachment of columnar cells leaving only swollen regenerative cells fixed on the basement membrane, and the formation of epithelial folds. In summary, these data suggest that C. nardus oil has adverse effects on the life cycle and midgut morphology of a beneficial predator.

Antibacterial activity and physicochemical properties of a sealer containing copaiba oil.

This study aimed to evaluate the antimicrobial activity and physicochemical properties of a novel dual-cure endodontic sealer containing copaiba oil. The copaiba oil was obtained and characterized by gas chromatography (GC), and the minimum inhibitory concentration (MIC) was performed. The experimental sealers were formulated with copaiba oil concentrations of 0, 0.5, 1, and 2%, and the RealSeal™ (Sybron endo, Orange, USA) and AH Plus (Dentsply De Trey Gmbh, Konstanz, Germany) were used as the commercial references. The antimicrobial activity of the sealers was evaluated by the direct contact test for 1h and 24h. To evaluate the physicochemical properties of the sealers, the degree of conversion, setting time, film thickness, dimensional stability, and radiopacity tests were performed. The data were statistically analyzed by one-way ANOVA and Tukey's test (α = 0.05). Concerning the results, the sealers containing copaiba oil showed antimicrobial activity without harming the physicochemical properties.

Sequential hydrozirconation/Pd-catalyzed cross coupling of acyl chlorides towards conjugated (2E,4E)-dienones.

Dienones are challenging building blocks in natural product synthesis due to their high reactivity and complex synthesis. Based on previous work and own initial results, a new stereospecific sequential hydrozirconation/Pd-catalyzed acylation of enynes with acyl chlorides towards conjugated (2E,4E)-dienones is reported. We investigated a number of substrates with different alkyl and aryl substituents in the one-pot reaction and showed that regardless of the substitution pattern, the reactions lead to the stereoselective formation (≥95% (2E,4E)) of the respective dienones under mild conditions. It was found that enynes with alkyl chains gave higher yields than the corresponding aryl-substituted analogues, whereas the variation of the acyl chlorides did not affect the reaction significantly. The synthetic application is demonstrated by formation of non-natural and natural dienone-containing terpenes such as ß-ionone which was available in 4 steps and 6% overall yield.

Intraspecific variation in ultrastructure and secretion of the resin canals in Anacardium humile (Anacardiaceae).

The study combines a range of light and electron microscopy methods to access variation in secretion and ultrastructure in the secretory canals in the above- and belowground stems of Anacardium humile, which here serves as a model system. The aboveground stem canals show epithelial cells with ultrastructural characteristics typical of cells active in secretion, while in the belowground stems, the subcellular characteristics are typical of cells with low rates of metabolism. The secretory canals of the belowground stems show uniformity in size and shape, a large central vacuole, a cytoplasm reduced to a thin layer at the cell periphery, and a reduced population of organelles. The aboveground stem canals had voluminous nuclei with evident nucleoli, a very dense cytoplasm with free ribosomes, polyribosomes, mitochondria with developed cristae, and ellipsoid plastids with electron-opaque droplets surrounded by a periplastid reticulum. The vacuoles were of different sizes and often had membranous contents and the dictyosomes were very developed with dilated ends to the cisternae, rough endoplasmic reticulum, and numerous vesicles. The results show that particularities in above- and belowground environment have significant implications for ultrastructural morphology and functioning of secretory canals in the stems of A. humile.

Clinical reproducibility of different centric relation recording techniques in edentulous individuals: An observational cross-sectional study.

PURPOSE: To assess the reproducibility of four different centric relation (CR) recording techniques, and time spent performing each technique in edentulous individuals. MATERIALS AND METHODS: Four techniques were assessed: extraoral gothic arch (EOGA) tracing, intraoral gothic arch (IOGA) tracing, deglutition (D), and frontal manipulation with tongue elevation (FMTE). Twelve subjects participated in the study; four technique records were performed on each volunteer by the same operator. Each record was repeated three times, in the same period of the day, with a 30 min interval between each technique. The reproducibility of each technique was assessed by the tri-dimensional displacement of the position of the condylar housing (mandible condyle) to the wall of the condylar guide (glenoid cavity) in the semi-adjustable articulator (anteroposterior, mediolateral, and superior-inferior). The time spent on each technique was timed in seconds (from the beginning of each technique until the wax occlusion fixation). The analysis of variance (ANOVA) and the Tukey test were performed for anteroposterior displacement (two-way) and for time spent on CT recording techniques (one-way) (α < 0.05). Regarding mediolateral and superior-inferior displacements, the nonparametric Kruskal-Wallis was performed for the comparison between recording methods, whereas the Mann-Whitney test was performed for the comparison between sides (α < 0.05). RESULTS: The factor recording technique interfered with the anteroposterior displacement (ANOVA: α < 0.001; F = 11.396). The technique D (right side: 3.78 ± 0.69 mm; left side: 3.45 ± 0.74 mm) showed a statistically significant difference compared to the other techniques (EOGA: right side: 3.00 ± 0.00 mm; left side: 3.00 ± 0.00 mm; FMTE: right side: 2.81 ± 0.52 mm; left side: 2.82 ± 0.79 mm; IOGA: right side: 2.90 ± 0.65 mm; left side: 3.12 ± 0.44 mm). The time spent on the recording technique influenced the results (ANOVA: α < 0.001; F = 21.118). The IOGA (340.40 ± 163.41 s) and EOGA (285.93 ± 133.84 s) required more time compared to the D (86.00 ± 34.33 s) and FMTE (101.33 ± 36.72 s) techniques. CONCLUSION: Graphic recordings showed better reproducibility and accuracy of the position of the centric relation.

Azadirachtin-based insecticide impairs testis morphology and spermatogenesis of the southern armyworm Spodoptera eridania (Lepidoptera: Noctuidae).

BACKGROUND: In the search for alternative tools for integrated pest management, azadirachtin, a botanical insecticide, has been used with the most promising activity against Spodoptera spp., but the mechanism of cytotoxicity on reproductive organs remains unclear. Spodoptera eridania (Stoll, 1782) is a polyphagous pest with great economic importance that has become an important target to elucidate the action of azadirachtin on the reproductive organs of insect pests, helping to understand the deleterious effects caused by its exposure. This study evaluated the effects of chronic exposure to azadirachtin on the morphology and ultrastructure of S. eridania larval testes as well as larval development. RESULTS: Azadirachtin exposure (6 or 18 mg a.i. L-1 ) caused a progressive increase in cumulative mortality and reduced gain in body mass after 5 days. Testicular structure indicated a reduction in their size with internal morphological changes such as spermatogonia, spermatogonial, spermatocytes and spermatid cysts in degeneration. The occurrence of cell death in germ and somatic cells was evidenced by the TUNEL technique. Electron microscopy revealed changes in cystic cells, such as cytoplasmic membrane rupture and cytoplasmic vacuolization. Chromatin compaction, changes in the rough endoplasmic reticulum and Golgi complex cisternae were observed in germ cells. Apoptotic bodies occurred between germ cell cysts. CONCLUSION: Azadirachtin damaged the testes of S. eridania larvae, and these changes compromised spermatogenesis and consequently the development of the reproductive potential of this specimen, making azadirachtin a promising botanical insecticide for application in integrated pest management programs. © 2022 Society of Chemical Industry.

Abutment on Titanium-Base Hybrid Implant: A Literature Review.

An increase in the use of Computer-Aided Design (CAD) and Computer-Aided Manufacturing (CAM) technologies challenges the conventional prosthetic fabrication procedures that are practical and centered on a digital workflow for the patient, especially for dental implants. Increasing workflow of digital restoration work, considering computer-used CAM for restoration technology systems and also fast/CAM for building restoration technology; fast/CAD, also known as abut-Base, has increased interest. Studies on adaptation of different restorative materials, on titanium (Ti)-base abutments, traction, and transformed cycling have become relevant. The objective of this work was to research, through literature studies, on restoration-type abutments. A total of 24 articles were found after searching the following terms in PubMed/Medline, Scopus, and Embase databases: "ti-base AND abutment." Twenty-one manuscripts selected from the inclusion and exclusion criteria. After an analysis of these articles, it was concluded that the Ti-base abutment and components from the same manufacturer as the Implant should be used preferably; milled monolithic crowns designed to adapt to the Ti-base the hybrid abutment-crown assembly does not affect torque maintenance after thermal aging; the saliva and cleaning protocol of the Ti-base bonding surfaces can influence the operations of the Ti-base crowns; Ti-base and Crown surface treatment is recommended for better applicability and stability results, and the superiority of resin-based cements compared with other types of cements.

Effect of Extrinsic Pigmentation on Dimensional Stability, Hardness, Detail Reproduction, and Color of a Silicone.

OBJECTIVE: The aim of the study is to evaluate the effect of extrinsic pigmentation on the dimensional stability, hardness, detail reproduction, and color of a silicone after thermocycling. MATERIALS AND METHODS: Sixty samples of MDX4-4210 silicone (Dow Corning Corporation Medical Products) with intrinsic pink pigment (H-109-P, Factor II) and intrinsic opacifier (TiO) were fabricated. Two groups were created: Group 1-only intrinsic pigmentation (H-109P, Factor II + TiO) (Control); and Group 2-intrinsic (H-109P, Factor II + TiO) and extrinsic (Tan FE - 215, Factor II) pigmentation. The following tests were performed for each group: dimensional stability, Shore A hardness, detail reproduction, and color. Readings for the tests were taken before and after thermocycling (2,000 cycles). For dimensional stability and hardness, two-way analysis of variance (ANOVA) was used. One-way ANOVA was used for the color test. In case of significant statistical difference, the Tukey test was applied (p <0.05). All samples achieved the same detail reproduction score, therefore, no statistical evaluation was performed. RESULTS: For the dimensional stability test, comparing the initial time with the final time, there was a significant contraction in both groups after thermocycling. For the hardness test, comparing the time points, only group 1 showed a significant reduction in hardness after thermocycling. Groups 1 and 2 scored 2 for the detail reproduction test, before and after thermocycling. Comparing group 1 with group 2, there was no significant difference for color change. CONCLUSION: Based on the tests performed, extrinsic pigmentation did not show a negative effect on silicone, and therefore it can be indicated. The results of the dimensional, hardness, detail reproduction and color evaluations of the MDX4-4210 silicone were clinically acceptable in all cases in the groups with and without extrinsic pigmentation.