ABSTRACT
In this investigation, ternary Al-Bi-Zn composites were prepared through mechanochemical activation to determine the combined effects of low-cost Bi and Zn on the morphology change and reactivity of the Al composite during the hydrolysis reaction. Specifically, Zn was considered as a means to slow the hydrogen generation rate while preserving a high hydrogen yield. A steady hydrogen generation rate is preferred when coupled with a proton exchange membrane fuel cell (PEMFC). Scanning electron microscopy (SEM) analysis indicated that Bi and Zn were distributed relatively uniformly in Al particles. By doing so, galvanic coupling between anodic Al and the cathodic Bi/Zn sustains the hydrolysis reaction until the entire Al particle is consumed. X-ray diffraction analysis (XRD) showed no intermetallic phases between Al, Bi, and/or Zn formed. A composite containing 7.5 wt% Bi and 2.5 wt% Zn had a hydrogen yield of 99.5%, which was completed after approximately 2300 s. It was further found that the water quality used during hydrolysis could further slow the hydrogen generation rate.
ABSTRACT
Bioconversion of renewable H2 and waste CO2 using methanogenic archaea is a promising technology for obtaining high-purity CH4, which can serve as an alternative for natural gas. This process is known as ex situ biogas upgrading. This work highlights the pathway toward the bioconversion of renewable H2 and CO2 into high-purity biomethane by exploiting highly accessible agro-municipal residues: cow manure (CM) and the organic fraction of solid municipal waste (OFSMW), which used to be called "waste materials". More specifically, an ex situ thermophilic (55 °C) biogas upgrading process was conducted by CM and OFSMW codigestion at different mass proportions: 100:0, 80:20, 70:30, 60:40, and 50:50. Maximum CH4 concentrations of 92-97 vol % and biogas volumetric production rates of 4954-6605 NmL/L.d were obtained from a batch reactor of 3 L working volume. Feedstock characterization, pH monitoring, and the carbon-to-nitrogen ratio were critical parameters to evaluate during biogas upgrading experiments. In this work, the usefulness of agro-municipal substrates is highlighted by producing high-purity biomethane-an energetic chemical to facilitate renewable energy conversion, which supports various end-use applications. This process therefore provides a solution to renewable energy storage challenges and future sustainable and green energy supply.
