Distinct but parallel evolutionary patterns between alcohol and aldehyde dehydrogenases: addition of fish/human betaine aldehyde dehydrogenase divergence.

Alcohol dehydrogenases (ADHs) of the MDR type (medium-chain dehydrogenases/reductases) have diverged into two evolutionary groups in eukaryotes: a set of 'constant' enzymes (class III) typical of basal enzymes, and a set of 'variable' enzymes (remaining classes) suggesting 'evolving' forms. The variable set has larger overall variability, different segment variability, and variability also in functional segments. Using a major aldehyde dehydrogenase (ALDH) from cod liver and fish ALDHs deduced from the draft genome sequence of Fugu rubripes (Japanese puffer fish), we found that ALDHs form more complex patterns than the ADHs. Nevertheless, ALDHs also group into 'constant' and 'variable' sets, have separate segment variabilities, and distinct functions. Betaine ALDH (class 9 ALDH) is 'constant,' has three segments of variability, all non-functional, and a limited fish/human divergence, reminiscent of the ADH class III pattern. Enzymatic properties of fish betaine ALDH were also determined. Although all ALDH patterns are still not known, overall patterns are related to those of ADH, and group separations may be distinguished. The results can be interpreted functionally, support ALDH isozyme distinctions, and assign properties to the multiplicities of the ADH and ALDH enzymes.

Crystal structure of sorbitol dehydrogenase.

Sorbitol dehydrogenase (SDH) is a distant relative to the alcohol dehydrogenases (ADHs) with sequence identities around 20%. SDH is a tetramer with one zinc ion per subunit. We have crystallized rat SDH and determined the structure by molecular replacement using a tetrameric bacterial ADH as search object. The conformation of the bound coenzyme is extended and similar to NADH bound to mammalian ADH but the interactions with the NMN-part have several differences with those of ADH. The active site zinc coordination in SDH is significantly different than in mammalian ADH but similar to the one found in the bacterial tetrameric NADP(H)-dependent ADH of Clostridiim beijerinckii. The substrate cleft is significantly more polar than for mammalian ADH and a number of residues are ideally located to position the sorbitol molecule in the active site. The SDH molecule can be considered to be a dimer of dimers, with subunits A-B and C-D, where the dimer interactions are similar to those in mammalian ADH. The tetramers are composed of two of these dimers, which interact with their surfaces opposite the active site clefts, which are accessible on the opposite side. In contrast to the dimer interactions, the tetramer-forming interactions are small with only few hydrogen bonds between side-chains.

Sorbitol dehydrogenase of Drosophila. Gene, protein, and expression data show a two-gene system.

The Drosophila melanogaster sorbitol dehydrogenase (SDH) is characterized as a two-enzyme system of the medium chain dehydrogenase/reductase family (MDR). The SDH-1 enzyme has an enzymology with Km and kcat values an order of magnitude higher than those for the human enzyme but with a similar kcat/Km ratio. It is a tetramer with identical subunits of approximately 38 kDa. At the genomic level, two genes, Sdh-1 and Sdh-2, have a single transcriptional start site and no functional TATA box. Expression is greater in larvae and adults than in pupae, where it is very low. At all three stages, Sdh-1 constitutes the major transcript. Sdh-1 and Sdh-2 genes were located at positions 84E-F and 86D in polytene chromosomes. The deduced amino acid sequences of the two genes show 90% residue identity. Evaluation of the sequence and modeling of the structure toward that of class I alcohol dehydrogenase (ADH) show altered loop and gap arrangements as in mammalian SDH and establishes that SDH, despite gene multiplicity and larger variability than the "constant" ADH of class III, is an enzyme conserved over wide ranges.

Structure of betaine aldehyde dehydrogenase at 2.1 A resolution.

The three-dimensional structure of betaine aldehyde dehydrogenase, the most abundant aldehyde dehydrogenase (ALDH) of cod liver, has been determined at 2.1 A resolution by the X-ray crystallographic method of molecular replacement. This enzyme represents a novel structure of the highly multiple ALDH, with at least 12 distinct classes in humans. This betaine ALDH of class 9 is different from the two recently determined ALDH structures (classes 2 and 3). Like these, the betaine ALDH structure has three domains, one coenzyme binding domain, one catalytic domain, and one oligomerization domain. Crystals grown in the presence or absence of NAD+ have very similar structures and no significant conformational change occurs upon coenzyme binding. This is probably due to the tight interactions between domains within the subunit and between subunits in the tetramer. The oligomerization domains link the catalytic domains together into two 20-stranded pleated sheet structures. The overall structure is similar to that of the tetrameric bovine class 2 and dimeric rat class 3 ALDH, but the coenzyme binding with the nicotinamide in anti conformation, resembles that of class 2 rather than of class 3.

Isozyme multiplicity with anomalous dimer patterns in a class III alcohol dehydrogenase. Effects on the activity and quaternary structure of residue exchanges at "nonfunctional" sites in a native protein.

The isozymes of class III alcohol dehydrogenase/glutathione-dependent formaldehyde dehydrogenase from cod were characterized. They exhibited three unexpected properties of general interest. First, these dimeric isozymes, derived from two types of subunit (h and l, for high- and low-activity forms), were recovered from liver preparations in only the homodimeric ll and heterodimeric hl combinations. Dissociation and reassociation of the isolated hl form in vitro also resulted in lower yields of the hh than the ll homodimer, although class III subunits are usually freely associable over wide borders of divergence (human and Drosophila). The h and l primary structures show that both chain types are characteristic of class III enzymes, without large amino acid replacements at positions of known subunit interactions. Hence, the hh dimer partial restriction indicates nontraditional alterations at h-subunit interfaces. The structure provides a possible explanation, in the form of h-chain modifications that may influence the anchoring of a loop at positions of two potentially deamidative beta-aspartyl shifts at distant Asn-Gly structures. Second the ll and hl forms differ in enzymatic properties, having 5-fold different K(m) values for NAD+ at pH 8, different K(m) values for S-(hydroxymethyl)glutathione (10 versus 150 microM), and different specific activities (4.5 versus 41 units/mg), with ll resembling and hl deviating from human and other class III alcohol dehydrogenases. However, functional residues lining substrate and coenzyme pockets in the known conformations of homologous forms are largely identical in the two isozymes [only minor conservative exchanges of Val/Leu116, Val/Leu203, Ile/Val224, and Ile/Val269 (numbering system of the human class I enzyme)], again indicating effects from distantly positioned h-chain replacements. Third, the two isozymes differ a surprising amount in amino acid sequence (18%, the same as the piscine/ human difference), reflecting a remarkably old isozyme duplication or, more probably, discordant accumulation of residue exchanges with greater speed of evolution for one of the subunits (h chain) than is typical for the slowly evolving class III alcohol dehydrogenase.

Pea formaldehyde-active class III alcohol dehydrogenase: common derivation of the plant and animal forms but not of the corresponding ethanol-active forms (classes I and P).

A plant class III alcohol dehydrogenase (or glutathione-dependent formaldehyde dehydrogenase) has been characterized. The enzyme is a typical class III member with enzymatic parameters and substrate specificity closely related to those of already established animal forms. Km values with the pea enzyme are 6.5 microM for NAD+, 2 microM for S-hydroxymethylglutathione, and 840 microM for octanol versus 9, 4, and 1200 microM, respectively, with the human enzyme. Structurally, the pea/human class III enzymes are closely related, exhibiting a residue identity of 69% and with only 3 of 23 residues differing among those often considered in substrate and coenzyme binding. In contrast, the corresponding ethanol-active enzymes, the long-known human liver and pea alcohol dehydrogenases, differ more (47% residue identities) and are also in functionally important active site segments, with 12 of the 23 positions exchanged, including no less than 7 at the usually much conserved coenzyme-binding segment. These differences affect functionally important residues that are often class-distinguishing, such as those at positions 48, 51, and 115, where the plant ethanol-active forms resemble class III (Thr, Tyr, and Arg, respectively) rather than the animal ethanol-active class I forms (typically Ser, His, and Asp, respectively). Calculations of phylogenetic trees support the conclusions from functional residues in subgrouping plant ethanol-active dehydrogenases and the animal ethanol-active enzymes (class I) as separate descendants from the class III line. It appears that the classical plant alcohol dehydrogenases (now called class P) have a duplicatory origin separate from that of the animal class I enzymes and therefore a paralogous relationship with functional convergence of their alcohol substrate specificity. Combined, the results establish the conserved nature of class III also in plants, and contribute to the molecular and functional understanding of alcohol dehydrogenases by defining two branches of plant enzymes into the system.

Crystal structure of cod liver class I alcohol dehydrogenase: substrate pocket and structurally variable segments.

The structural framework of cod liver alcohol dehydrogenase is similar to that of horse and human alcohol dehydrogenases. In contrast, the substrate pocket differs significantly, and main differences are located in three loops. Nevertheless, the substrate pocket is hydrophobic like that of the mammalian class I enzymes and has a similar topography in spite of many main-chain and side-chain differences. The structural framework of alcohol dehydrogenase is also present in a number of related enzymes like glucose dehydrogenase and quinone oxidoreductase. These enzymes have completely different substrate specificity, but also for these enzymes, the corresponding loops of the substrate pocket have significantly different structures. The domains of the two subunits in the crystals of the cod enzyme further differ by a rotation of the catalytic domains by about 6 degrees. In one subunit, they close around the coenzyme similarly as in coenzyme complexes of the horse enzyme, but form a more open cleft in the other subunit, similar to the situation in coenzyme-free structures of the horse enzyme. The proton relay system differs from the mammalian class I alcohol dehydrogenases. His 51, which has been implicated in mammalian enzymes to be important for proton transfer from the buried active site to the surface is not present in the cod enzyme. A tyrosine in the corresponding position is turned into the substrate pocket and a water molecule occupies the same position in space as the His side chain, forming a shorter proton relay system.

Crystallisation and crystallographic investigations of cod alcohol dehydrogenase class I and class III enzymes.

Cod liver alcohol dehydrogenase of class-hybrid properties has been crystallized as an NAD(+)-pyrazole complex in the monoclinic space group P2(1) with cell dimensions a = 103.3 A, b = 47.4 A, c = 80.7 A, beta = 104.6 degrees, and with one dimer in the asymmetric unit. The position of the dimer molecule in the crystal was determined by molecular replacement methods at 3.0 A resolution. The successful search model was the poly-alanine structure of the horse enzyme. Side chains were then replaced according to the amino acid sequence of the cod enzyme, and the structure has been refined at 2.8 A to an R-factor of 0.26. Cod liver class III alcohol dehydrogenase crystallizes in the monoclinic space group C2 with cell dimensions a = 127.5 A, b = 76.6 A, c = 93.4 A, beta = 99.4 degrees and with probably one dimer in the asymmetric unit.

Crystallographic investigations of alcohol dehydrogenases.

The structures of horse liver alcohol dehydrogenase class I in its apoenzyme form and in different ternary complexes have been determined at high resolution. The complex with NAD+ and the substrate analogue pentafluorobenzyl alcohol gives a detailed picture of the interactions in an enzyme-substrate complex. The alcohol is bound to the zinc and positioned so that the hydrogen atom can be directly transferred to the C4 atom of the nicotinamide ring. The structure of cod liver alcohol dehydrogenase with hybrid properties (functionally of class I but structurally overall closer to class III) has been determined by molecular replacement methods to 3 A resolution. Yeast alcohol dehydrogenase has been crystallized, and native data have been collected to 3 A resolution.

[Capsular ligament surgery of the knee joint with resorbable materials. 5-year clinical experience with Vicryl and PDS ligaments]. / Kapselbandchirurgie des Kniegelenkes mit resorbierbaren Materialien. 5 Jahre klinische Erfahrung mit Vicryl- und PDS-Bänder.

Current methods of capsular ligament surgery of the knee joint are not sufficient stable. Tensions of unloaded movements of the knee joint are appropriate to destruct again the reconstructed capsular ligament mechanism. Immobilisation is required. Additional capsular ligament plastics produced out of absorbable materials (Polyglactin, Polydioxanon) protect safely the reconstructed capsular ligaments from destruction. Early functional treatment is practicable. The ligament plastics seem to stimulate the nature of origin of ligament-similar tissue. The plastic ligaments will be broken down to natural substances byx hydrolysis. An additional surgical excision is not required. Ligament plastics out of Vicryl are recommended.