In Situ Liquid Cell Transmission Electron Microscopy Study of Studtite Particle Formation and Growth via Electron Beam Radiolysis.

This study presents in situ observations of studtite (UO2O2(H2O)2·2H2O) crystal growth utilizing liquid phase transmission electron microscopy (LP-TEM). Studtite was precipitated from a uranyl nitrate hexahydrate solution using hydrogen peroxide formed by the radiolysis of water in the TEM electron beam. The hydrogen peroxide (H2O2) concentration, directly controlled by the electron beam current, was varied to create local environments of low and high concentrations to compare the impact of the supersaturation ratio on the nucleation and growth mechanisms of studtite particles. The subsequent growth mechanisms were observed in real time by TEM and scanning TEM imaging. After the initial precipitation reaction, a post-mortem TEM analysis was performed on the samples to obtain high-resolution TEM images and selected area electron diffraction patterns to investigate crystallinity as well as energy-dispersive X-ray spectroscopy spectra to ensure that studtite was produced. The results reveal that studtite particles form through various mechanisms based on the concentration ratio of uranyl to H2O2 and that studtite is initially produced through an amorphous intermediary prior to formation of the crystalline material commonly reported in the literature.

Electronic Tuning of Gold Nanoparticle Active Sites for Reduction Catalysis.

Electronic tuning of active sites in heterogeneous catalysis with organic ligands remains challenging since the ligands are often bound to the most active sites on the catalysts' surfaces. In this work, gold nanoparticles, which are on average less than 2 nm in diameter, are synthesized with strongly binding thiol and phosphine ligands and have measurable quantities of accessible sites on their surfaces in both cases. Triphenylphosphine (TPP) is used as the phosphine ligand, while triphenylmethyl mercaptan (TPMT) serves as the thiol ligand. Phosphines are chosen because they are electron-donating ligands when bound to Au, and thiols are selected because they are electron-withdrawing on the Au surface. X-ray photoelectron spectroscopy (XPS) results show differences in the Au 4f binding energies between the TPP- and TPMT-bound Au nanoparticles. Fourier transform infrared spectroscopy (FTIR) measurements of bound CO indicate that the TPP-bound Au nanoparticles are more electron-rich than the TPMT-bound Au nanoparticles. The number of binding sites on the surface is quantified using 2-naphthalenethiol titration experiments. It is observed that the number of binding sites on the thiol and phosphine-bound Au nanoparticles is similar in both cases. The Au nanoparticles are used for three different reactions: resazurin reduction, CO oxidation, and benzyl alcohol oxidation. For both CO oxidation and benzyl alcohol oxidation, which are performed with the ligands attached, TPP- and TPMT-bound nanoparticles are both catalytically active. However, for resazurin reduction, the TPMT-bound Au nanoparticles are not active, while the TPP-bound Au nanoparticles are catalytically active. These results illustrate that the catalytic activity can be tuned using bound organic ligands with different electronic properties for reduction reactions using Au nanoparticle catalysts.

Synthesis of Highly Accessible and Reactive Sites in Gold Nanoparticles Using Bound Bis(Diphenylphosphine) Ligands.

While bound organic ligands provide steric protection against aggregation for metallic nanoparticles in solution, they can block a large fraction of the surface atoms which are needed for binding in catalysis and sensing applications. In this work, highly accessible Au nanoparticles ligated with bis(diphenylphosphine) molecules are synthesized and characterized in solution. Characterization is performed using high angle annular dark field-scanning transmission electron microscopy (HAADF-STEM), ultraviolet-visible (UV-Vis) spectroscopy, and fluorescence chemisorption experiments. These synthesized nanoparticles are accessible to a 2-napthalenethiol (2-NT) probe molecule in solution. The highest 2-NT accessibility is observed when using 1,1-bis(diphenylphosphino)methane (dppm) ligand where 61 % of the total gold atoms are accessible. It is hypothesized that increasing the rigidity of the bis(diphenylphosphine) ligand increases the number of binding sites on the Au nanoparticles. These nanoparticles are catalytically active for resazurin reduction, and the resazurin reduction rate scales with the number of binding sites.

In-situ characterization of porcine fibroblasts in response to silver ions by Raman spectroscopy and liquid scanning transmission electron microscopy.

Since silver ion is known for its antimicrobial function, most of the research has focused mainly on toxicity effects rather than the role of silver ion in general biology and the behind mechanism of actions of silver ion in mammalian cells. Moreover, a conventional in vitro approach to estimate the effects of silver ion on cells does not provide information about the biochemical changes and might accompany artifacts due to invasive and destructive sample preparation processes. In the present study, in-situ real time approaches were applied to evaluate the impact of silver ion (0.57, 1.34, 1.96, 2.33 mg/L) on fibroblast cells. Raman spectroscopy analysis showed that Raman peak intensities of proteins and nucleic acids significantly increased in the cells after exposure to silver ion for 21 h, especially at relatively higher levels 1.34, 1.96, and 2.33 mg/L. Raman peak at 1585 cm-1 and liquid scanning transmission electron microscopy energy-dispersive x-ray spectroscopy (STEM-EDS) analysis revealed the fate of silver ion that was taken up by the cell and reduced into metallic silver accumulating in the cell as silver nanoparticles. These results suggest cells were undergoing different activities such as enhanced metabolic activities rather than cell apoptosis or cell death. Additionally, Raman spectroscopy predicted the level of silver ion exposed to the cell at 2.11 ± 0.38 and 1.73 ± 0.26 mg/L by the PLS prediction model, compared with the results measured by inductively coupled plasma mass spectrometry (ICP-MS), 2.14 ± 0.07 and 1.87 ± 0.07 mg/L respectively, suggesting Raman spectroscopy can provide a new and fast approach to determine and measure the concentration of silver ion or probably other tested molecules treated to the cell for the future research.

Dynamic surface tension probe for measuring the concentration of extracellular vesicles.

The concentration of extracellular vesicles (EVs) is an essential attribute of biofluids and EV preparations. EV concentration in body fluids was correlated with health status. The abundance of EV secreted by cultured cells into growth medium is vital in signaling studies, tissue and disease models, and biomanufacturing of acellular therapeutic secretome. A limited number of physical principles sensitive to EV concertation have been discovered so far. Particle-by-particle counting methods enumerate individual particles scattering light, modulating the Coulter current, or appearing in EM images. The available ensemble techniques in current use rely on the concentration-dependent signal intensity, as in the case of ELISA. In this study, we propose for the first-time the ensemble-based characterization of EV concentration by dynamic surface tension (DST) probe and demonstrate its implementation. We show that DST measurements agree with the widely used NTA measurements of EV concertation. The proposed method is low-cost and requires only basic laboratory equipment for implementation.

Liquid-cell transmission electron microscopy for imaging of thermosensitive recombinant polymers.

Various polymers used in controlled release applications exhibit solution-based thermal responses. Unfortunately, very few characterization and imaging techniques permit resolution of individual polymers during their thermally-triggered phase transitions. Here, we demonstrate the use of temperature-ramp liquid-cell transmission electron microscopy (LCTEM) for real-time evaluation of the solution and interfacial behavior of elastinlike polypeptides (ELPs) and their self-assembled nanostructures over a temperature range incorporating their intrinsic lower critical solution temperatures (LCSTs). Individual polymers and supramolecular assemblies were discriminated dependent upon solubility states. The recombinant polymers were shown to adsorb to the silicon-nitride chip window from the buffered saline solution and desorb in a temperature-dependent manner. Silk-elastinlike protein block copolymers (SELPs) (composed of repeat peptide motifs of silk and elastin) differed from ELPs in thermal behavior. While both polymers were shown to cluster, only SELPs formed robust amyloid-like fibers upon heating.

Vibrational mode and collision energy effects on reaction of H2CO+ with CO2.

The effects of collision energy (Ecol) and five different modes of H2CO+ vibration on the title reaction have been studied over the center-of-mass Ecol range from 0.1 to 3.2 eV, including measurements of product ion recoil velocity distributions. Electronic structure and Rice-Ramsperger-Kassel-Marcus calculations were used to examine properties of various complexes and transition states that might be important along the reaction coordinate. Two product channels are observed, corresponding to Hydrogen Transfer (HT) and Proton Transfer (PT). Both channels are endothermic with similar onset energies of approximately 0.9 eV; however, HT dominates over the entire Ecol range and accounts for 70-85% of the total reaction cross section. Both HT and PT occur by direct mechanisms over the entire Ecol range, and have similar dependence on reactant vibrational and collision energy. Despite these similarities, and the fact that the two channels are nearly isoenergetic and differ only in which product moiety carries the charge, their dynamics appear quite different. PT occurs primarily in large impact parameter stripping collisions, where most of the available energy is partitioned to product recoil. HT, in contrast, results in internally hot products with little recoil energy and a more forward-backward symmetric product velocity distribution. Vibration is found to affect the reaction differently in different collision energy regimes. The appearance thresholds are found to depend only on total energy, i.e., all modes of vibration are equivalent to Ecol. With increasing Ecol, vibrational energy becomes increasingly effective, relative to Ecol, at driving reaction. For HT, this transition occurs just above threshold, while for PT it begins at roughly twice the threshold energy.

Vibrational mode and collision energy effects on reaction of H2CO+ with C2H2: charge state competition and the role of Franck-Condon factors in endoergic charge transfer.

The effects of collision energy (E(col)) and six different H(2)CO(+) vibrational states on the title reaction have been studied over the center-of-mass E(col) range from 0.1 to 2.6 eV, including measurements of product ion recoil velocity distributions. Ab initio and Rice-Ramsperger-Kassel-Marcus calculations were used to examine the properties of complexes and transition states that might be important in mediating the reaction. Reaction is largely direct, despite the presence of multiple deep wells on the potential surface. Five product channels are observed, with a total reaction cross section at the collision limit. The competition among the major H(2) (+) transfer, hydrogen transfer, and proton transfer channels is strongly affected by E(col) and H(2)CO(+) vibrational excitation, providing insight into the factors that control competition and charge state "unmixing" during product separation. One of the more interesting results is that endoergic charge transfer appears to be controlled by Franck-Condon factors, implying that it occurs at large inter-reactant separations, contrary to the expectation that endoergic reactions should require intimate collisions to drive the necessary energy conversion.

Vibrational mode and collision energy effects on reaction of H2CO+ with C2D4.

We report the effects of collision energy (Ecol) and five different H2CO+ vibrational modes on the reaction of H2CO+ with C2D4 over the center-of-mass E(col) range from 0.1 to 2.1 eV. Properties of various complexes and transition states were also examined computationally. Seven product channels are observed. Charge transfer (CT) has the largest cross section over the entire energy range, substantially exceeding the hard sphere cross section at high energies. Competing with CT are six channels involving transfer of one or more hydrogen atoms or protons and one involving formation of propanal, followed by hydrogen elimination. Despite the existence of multiple deep wells on the potential surface, all reactions go by direct mechanisms, except at the lowest collision energies, where short-lived complexes appear to be important. Statistical complex decay appears adequate to account for the product branching at low collision energies, however, even at the lowest energies, the vibrational effects are counter to statistical expectations. The pattern of Ecol and vibrational mode effects provide insight into factors that control reaction and interchannel competition.