Can a channelized Hotelling observer assess image quality in acquired mammographic images of an anthropomorphic breast phantom including image processing?

PURPOSE: To study the feasibility of a channelized Hotelling observer (CHO) to predict human observer performance in detecting calcification-like signals in mammography images of an anthropomorphic breast phantom, as part of a quality control (QC) framework. METHODS: A prototype anthropomorphic breast phantom with inserted gold disks of 0.25 mm diameter was imaged with two different digital mammography x-ray systems at four different dose levels. Regions of interest (ROIs) were extracted from the acquired processed and unprocessed images, signal-present and signal-absent. The ROIs were evaluated by a CHO using four different formulations of the difference of Gaussian (DoG) channel sets. Three human observers scored the ROIs in a two-alternative forced-choice experiment. We compared the human and the CHO performance on the simple task to detect calcification-like disks in ROIs with and without postprocessing. The proportion of correct responses of the human reader (PCH ) and the CHO (PCCHO ) was calculated and the correlation between the two was analyzed using a mixed-effect regression model. To address the signal location uncertainty, the impact of shifting the DoG channel sets in all directions up to two pixels was evaluated. Correlation results including the goodness of fit (r2 ) of PCH and PCCHO for all different parameters were evaluated. RESULTS: Subanalysis by system yielded strong correlations between PCH and PCCHO , with r2 between PCH and PCCHO was found to be between 0.926 and 0.958 for the unshifted and between 0.759 and 0.938 for the shifted channel sets, respectively. However, the linear fit suggested a slight system dependence. PCCHO with shifted channel sets increased CHO performance but the correlation with humans was decreased. These correlations were not considerably affected by of the DoG channel set used. CONCLUSIONS: There is potential for the CHO to be used in QC for the evaluation of detectability of calcification-like signals. The CHO can predict the PC of humans in images of calcification-like signals of two different systems. However, a global model to be used for all systems requires further investigation.

Can the channelized Hotelling observer including aspects of the human visual system predict human observer performance in mammography?

PURPOSE: In mammography, images are processed prior to display. Model observers (MO) are candidates to objectively evaluate processed images if they can predict human observer performance for detail detection. The aim of this study was to investigate if the channelized Hotelling observer (CHO) can be configured to predict human observer performance in mammography like images. METHODS: The performance correlation between human observers and CHO has been evaluated using different channel-sets and by including aspects of the human visual system (HVS). The correlation was investigated for the detection of disk-shaped details in simulated white noise (WN) and clustered lumpy backgrounds (CLB) images, representing respectively quantum noise limited and mammography like images. The images were scored by the MO and five human observers in 2-alternative forced choice experiments. RESULTS: For WN images the most useful formulation of the CHO to predict human observer performance was obtained using three difference of Gaussian channels without adding HVS aspects (RLR2=0.62). For CLB images the most useful formulation was the partial least square channel-set without adding HVS aspects (RLR2=0.71). The correlation was affected by detail size and background. CONCLUSIONS: This study has shown that the CHO can predict human observer performance. Due to object size and background dependency it is important that the range of object sizes and allowed variability in background are specified and validated carefully before the CHO can be implemented for objective image quality assessment.

Can the non-pre-whitening model observer, including aspects of the human visual system, predict human observer performance in mammography?

PURPOSE: In mammography, images are processed prior to display. Current methodologies based on physical image quality measurements are however not designed for the evaluation of processed images. Model observers (MO) might be suitable for this evaluation. The aim of this study was to investigate whether the non-pre-whitening (NPW) MO can be used to predict human observer performance in mammography-like images by including different aspects of the human visual system (HVS). METHODS: The correlation between human and NPW MO performance has been investigated for the detection of disk shaped objects in simulated white noise (WN) and clustered lumpy backgrounds (CLB), representing quantum noise limited and mammography-like images respectively. The images were scored by the MO and five human observers in a 2-alternative forced choice experiment. RESULTS: For WN images it was found that the log likelihood ratio (RLR2), which expresses the goodness of fit, was highest (0.44) for the NPW MO without addition of HVS aspects. For CLB the RLR2 improved from 0.46 to 0.65 with addition of HVS aspects. The correlation was affected by object size and background. CONCLUSIONS: This study shows that by including aspects of the HVS, the performance of the NPW MO can be improved to better predict human observer performance. This demonstrates that the NPW MO has potential for image quality assessment. However, due to the dependencies found in the correlation, the NPW MO can only be used for image quality assessment for a limited range of object sizes and background variability.

SIMULATING LOCAL DENSE AREAS USING PMMA TO ASSESS AUTOMATIC EXPOSURE CONTROL IN DIGITAL MAMMOGRAPHY.

Current digital mammography (DM) X-ray systems are equipped with advanced automatic exposure control (AEC) systems, which determine the exposure factors depending on breast composition. In the supplement of the European guidelines for quality assurance in breast cancer screening and diagnosis, a phantom-based test is included to evaluate the AEC response to local dense areas in terms of signal-to-noise ratio (SNR). This study evaluates the proposed test in terms of SNR and dose for four DM systems. The glandular fraction represented by the local dense area was assessed by analytic calculations. It was found that the proposed test simulates adipose to fully glandular breast compositions in attenuation. The doses associated with the phantoms were found to match well with the patient dose distribution. In conclusion, after some small adaptations, the test is valuable for the assessment of the AEC performance in terms of both SNR and dose.

Average glandular dose in digital mammography and digital breast tomosynthesis: comparison of phantom and patient data.

For the evaluation of the average glandular dose (AGD) in digital mammography (DM) and digital breast tomosynthesis (DBT) phantoms simulating standard model breasts are used. These phantoms consist of slabs of polymethyl methacrylate (PMMA) or a combination of PMMA and polyethylene (PE). In the last decades the automatic exposure control (AEC) increased in complexity and became more sensitive to (local) differences in breast composition. The question is how well the AGD estimated using these simple dosimetry phantoms agrees with the average patient AGD. In this study the AGDs for both dosimetry phantoms and for patients have been evaluated for 5 different x-ray systems in DM and DBT modes. It was found that the ratios between patient and phantom AGD did not differ considerably using both dosimetry phantoms. These ratios averaged over all breast thicknesses were 1.14 and 1.15 for the PMMA and PMMA-PE dosimetry phantoms respectively in DM mode and 1.00 and 1.02 in the DBT mode. These ratios were deemed to be sufficiently close to unity to be suitable for dosimetry evaluation in quality control procedures. However care should be taken when comparing systems for DM and DBT since depending on the AEC operation, ratios for particular breast thicknesses may differ substantially (0.83-1.96). Although the predictions of both phantoms are similar we advise the use of PMMA + PE slabs for both DM and DBT to harmonize dosimetry protocols and avoid any potential issues with the use of spacers with the PMMA phantoms.

Evaluation of low-energy contrast-enhanced spectral mammography images by comparing them to full-field digital mammography using EUREF image quality criteria.

OBJECTIVE: Contrast-enhanced spectral mammography (CESM) examination results in a low-energy (LE) and contrast-enhanced image. The LE appears similar to a full-field digital mammogram (FFDM). Our aim was to evaluate LE CESM image quality by comparing it to FFDM using criteria defined by the European Reference Organization for Quality Assured Breast Screening and Diagnostic Services (EUREF). METHODS: A total of 147 cases with both FFDM and LE images were independently scored by two experienced radiologists using these (20) EUREF criteria. Contrast detail measurements were performed using a dedicated phantom. Differences in image quality scores, average glandular dose, and contrast detail measurements between LE and FFDM were tested for statistical significance. RESULTS: No significant differences in image quality scores were observed between LE and FFDM images for 17 out of 20 criteria. LE scored significantly lower on one criterion regarding the sharpness of the pectoral muscle (p < 0.001), and significantly better on two criteria on the visualization of micro-calcifications (p = 0.02 and p = 0.034). Dose and contrast detail measurements did not reveal any physical explanation for these observed differences. CONCLUSIONS: Low-energy CESM images are non-inferior to FFDM images. From this perspective FFDM can be omitted in patients with an indication for CESM. KEY POINTS: • Low-energy CESM images are non-inferior to FFDM images. • Micro-calcifications are significantly more visible on LE CESM than on FFDM. • There is no physical explanation for this improved visibility of micro-calcifications. • There is no need for an extra FFDM when CESM is indicated.

Dose assessment in contrast enhanced digital mammography using simple phantoms simulating standard model breasts.

Slabs of polymethyl methacrylate (PMMA) or a combination of PMMA and polyethylene (PE) slabs are used to simulate standard model breasts for the evaluation of the average glandular dose (AGD) in digital mammography (DM) and digital breast tomosynthesis (DBT). These phantoms are optimized for the energy spectra used in DM and DBT, which normally have a lower average energy than used in contrast enhanced digital mammography (CEDM). In this study we have investigated whether these phantoms can be used for the evaluation of AGD with the high energy x-ray spectra used in CEDM. For this purpose the calculated values of the incident air kerma for dosimetry phantoms and standard model breasts were compared in a zero degree projection with the use of an anti scatter grid. It was found that the difference in incident air kerma compared to standard model breasts ranges between -10% to +4% for PMMA slabs and between 6% and 15% for PMMA-PE slabs. The estimated systematic error in the measured AGD for both sets of phantoms were considered to be sufficiently small for the evaluation of AGD in quality control procedures for CEDM. However, the systematic error can be substantial if AGD values from different phantoms are compared.

Phantoms for quality control procedures in digital breast tomosynthesis: dose assessment.

The recent introduction of digital breast tomosynthesis into clinical practice requires quality control procedures. In this study we have investigated whether the assessment of the average glandular dose for modelled standard breasts can be performed using a combination of polymethyl methacrylate (PMMA) and polyethylene (PE) slabs that matches standard breast thicknesses. For this purpose the energies absorbed per unit area of the image receptor when imaging standard breasts and PMMA-PE slabs have been matched taking account of both primary and scattered photons. To achieve this a two-step approach was used. Firstly, the behaviour of the scatter-to-primary ratio (SPR) of PMMA-PE phantoms and standard breasts was investigated using Monte Carlo simulations for various conditions. For imaging without an anti-scatter grid, it was found that the values of standard breast and phantom SPR were significantly different and it follows that these differences are relevant when matching the absorbed energy. In the second part, a set of PMMA-PE combinations is proposed which, for dosimetric purposes, can be used to simulate standard breasts in the thickness range 20 to 100 mm. The dosimetric error when using these PMMA-PE slabs was found to be below 6% for thicknesses up to 7 cm and increases to 10% for 10 cm thickness.

Estimation of mean glandular dose for breast tomosynthesis: factors for use with the UK, European and IAEA breast dosimetry protocols.

A formalism is proposed for the estimation of mean glandular dose for breast tomosynthesis, which is a simple extension of the UK, European and IAEA protocols for dosimetry in conventional projection mammography. The formalism introduces t-factors for the calculation of breast dose from a single projection and T-factors for a complete exposure series. Monte Carlo calculations of t-factors have been made for an imaging geometry with full-field irradiation of the breast for a wide range of x-ray spectra, breast sizes and glandularities. The t-factors show little dependence on breast glandularity and tables are provided as a function of projection angle and breast thickness, which may be used for all x-ray spectra simulated. The T-factors for this geometry depend upon the choice of projection angles and weights per projection, but various example calculations gave values in the range 0.93-1.00. T-factors are also provided for the Sectra tomosynthesis system, which employs a scanned narrow-beam imaging geometry. In this quite different configuration, the factor (denoted T(S)) shows an important dependence on breast thickness, varying between 0.98 and 0.76 for 20 and 110 mm thick breasts, respectively. Additional data are given to extend the current tabulations of g-, c- and s-factors used for dosimetry of conventional 2D mammography.

Further factors for the estimation of mean glandular dose using the United Kingdom, European and IAEA breast dosimetry protocols.

The United Kingdom, European and IAEA protocols for breast dosimetry in mammography make use of s-factors which allow for the use of different target/filter combinations. To supplement the existing protocols, a Monte Carlo computer program has been used to calculate s-factors for mammography using a tungsten target with silver filters of thicknesses 50-75 microm and for the same target filtered with 0.5 mm aluminium. The dosimetry protocols use slabs of polymethyl methacrylate (PMMA) of specified thicknesses to simulate the exposure of typical breasts. The equivalent thickness of PMMA has been calculated using a simplified approach for a wider range of x-ray spectra and for breast thicknesses of 2-11 cm. The results show that for the tungsten/silver target/filter combination, a single s-factor of 1.042 can be used with the protocols, but when the tungsten target is filtered with 0.5 mm of aluminium, it is necessary to select from a tabulation of s-factors against breast thickness. The equivalent thicknesses of PMMA for a given breast thickness show some dependence on beam quality and the values obtained differ from those presently used in the dosimetry protocols by an amount which depends upon breast thickness and half value layer (HVL). For the extreme case of an 11 cm breast and an HVL of 0.62 mm Al, the use of the protocol thickness would give rise to an error of 10%, but for breast thicknesses of 6 cm or less, the error is typically 2-3%.